Develop Bugs

[Q] rom manger not wrking (?)

ok so my mt3gs is rooted blah blah blah but it wont book to clockwrk thrw the rom manger it just comes up with a triangel and the ! mark (cant spell it) my question is y ? do i need to flash the eng spl or what ? thanks in advanced

rok0187 said:
do i need to flash the eng spl or what
Click to expand...
Click to collapse
Yes, you do.
Edit: And your post would be Q&A, not development.

Did u try pressing volume down and power at the ! Screen? I know clockwork usually comes up directly using rom manager, but you can still get to clockwork that way.
Sent from my myTouch 3G Slide using XDA App

rok0187 said:
ok so my mt3gs is rooted blah blah blah but it wont book to clockwrk thrw the rom manger it just comes up with a triangel and the ! mark (cant spell it) my question is y ? do i need to flash the eng spl or what ? thanks in advanced
Click to expand...
Click to collapse
You need to update the recovery from rom manager.
Sent from my T-Mobile myTouch 3G Slide using XDA App

None of these suggestions are going to do any good if he hasn't the flashed the engineering image.

ok just relized its in the wrong section and yea i read some wear u didnt need to flash the eng spl but i guess i have to so off to do that

I did previously flash the ENG build and I have to go through the first part of the root process every time I want to use Clockwork. I'm sure I'm doing something wrong...

Sleef said:
I did previously flash the ENG build and I have to go through the first part of the root process every time I want to use Clockwork. I'm sure I'm doing something wrong...
Click to expand...
Click to collapse
for real well iam not in any rush to flash the eng spl so i think iam just stick with the push methoid

rok0187 said:
for real well iam not in any rush to flash the eng spl so i think iam just stick with the push methoid
Click to expand...
Click to collapse
Why would you not flash the eng? It takes 5 minutes that save on asking repetitive questions. Many people will tell you that you DON'T need to flash it, but if everybody flashed the eng build, everytime there was a problem people wouldn't have to ask, "Did you flash the eng build?" Kind of a time-saver and yes it irons out ALL the kinks other than user error.
The belief that it WASN'T necessary was started by Wes Garner because one of his ROMS never installed correctly, but to this day, it still remains uninstallable...so it has nothing to do with the eng build being the prob.
Just my 2 cents, bro.

jreed3786 said:
Why would you not flash the eng? It takes 5 minutes that save on asking repetitive questions. Many people will tell you that you DON'T need to flash it, but if everybody flashed the eng build, everytime there was a problem people wouldn't have to ask, "Did you flash the eng build?" Kind of a time-saver and yes it irons out ALL the kinks other than user error.
Click to expand...
Click to collapse
The engineering rom being optional is like saying leaving gas in your car is optional. I mean, sure, you could always leave it empty and walk to the gas station with a can and come back every time you wanted to start it, but its a heck of a lot easier if you just leave some gas in the tank for next time.

Tick...tick...tick....
falken98 said:
The engineering rom being optional is like saying leaving gas in your car is optional. I mean, sure, you could always leave it empty and walk to the gas station with a can and come back every time you wanted to start it, but its a heck of a lot easier if you just leave some gas in the tank for next time.
Click to expand...
Click to collapse
BOOM!!!!! goes the ATOM BOMB!

Sleef said:
I did previously flash the ENG build and I have to go through the first part of the root process every time I want to use Clockwork. I'm sure I'm doing something wrong...
Click to expand...
Click to collapse
is the update.zip file on your memory card. If it is then all you have to do is flash the update.zip from the recovery menu or just use rom manager
Sent from my T-Mobile myTouch 3G Slide using XDA App

lstevens86 said:
is the update.zip file on your memory card. If it is then all you have to do is flash the update.zip from the recovery menu or just use rom manager
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
It is on my SD card but I have to do the adb loop process and push the update after unsuccessfully flashing the update just like the first time I rooted. Rom Manager is not getting me into Clockworkmod recovery.

Sleef said:
It is on my SD card but I have to do the adb loop process and push the update after unsuccessfully flashing the update just like the first time I rooted. Rom Manager is not getting me into Clockworkmod recovery.
Click to expand...
Click to collapse
did you use eugene's eng on your phone or wes's champion build
Sent from my T-Mobile myTouch 3G Slide using XDA App

lstevens86 said:
did you use eugene's eng on your phone or wes's champion build
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Pretty sure it was Eugene's. I also later ran the corrected .nbh file.

What an odd typo. I meant the ESPRIMG.zip.

Sleef said:
Pretty sure it was Eugene's. I also later ran the corrected .nbh file.
Click to expand...
Click to collapse
You have restored your phone back to stock recovery doing that. You need to reinstall the engineering image.

falken98 said:
You have restored your phone back to stock recovery doing that. You need to reinstall the engineering image.
Click to expand...
Click to collapse
Yeah Falken is right reinstall the engineering image. And that should solve it.
Sent from my T-Mobile myTouch 3G Slide using XDA App

Even before I ran the ESPRIMG.zip I couldn't get straight into Clockworkmod.
Thanks for helping, by the way. I have to go into work now but I'll give re-flashing the ENG build later.

Sleef said:
Even before I ran the ESPRIMG.zip I couldn't get straight into Clockworkmod.
Thanks for helping, by the way. I have to go into work now but I'll give re-flashing the ENG build later.
Click to expand...
Click to collapse
Just make sure you keep the update.zip on your sd. It didn't let you get straight into clockwork anyway. You need rom manager or bootloader to recovery then update.zip will get you in everytime with the ENG build
Sent from my T-Mobile myTouch 3G Slide using XDA App

Where can I download a recovery.img?

I just did the alpharev s-off and now I want to flash the latest CWM recovery.
But, where is it? At Koush's website you can only download the .zip file,
not an .img file to permanently flashed to the phone.

apollostees said:
I just did the alpharev s-off and now I want to flash the latest CWM recovery.
But, where is it? At Koush's website you can only download the .zip file,
not an .img file to permanently flashed to the phone.
Click to expand...
Click to collapse
The zip probably has the image in it. Alternatively you can just use ROM Manager to flash it. Free download in the market.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk

DonJuan692006 said:
The zip probably has the image in it. Alternatively you can just use ROM Manager to flash it. Free download in the market.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Click to expand...
Click to collapse
The zip doesn't have a .img file in it.
It has a file named recovery, but it doesn't have a file extension.
That's probably it, but I am unsure how to use this.
Also rom manager is not flashing the recovery to my phone.
It will let me go into cwm 2.5.0.7 via the old method.
But if I manually reboot into recovery I still have the same old version of cwm that alpharev installed
v2.5.0.1

i asked this awhile back as well.. and im still looking... Clock will not flash it cause it sees it as 3g slide and only does the update.zip method... and the zip contains what is needed but gotta make it into a img file

ilostchild said:
i asked this awhile back as well.. and im still looking... Clock will not flash it cause it sees it as 3g slide and only does the update.zip method... and the zip contains what is needed but gotta make it into a img file
Click to expand...
Click to collapse
How can we make it into an .img?
I could probably figure that out easy enough, but would it work right?

Have you tried just using the update.zip from recovery and seeing if it sticks? I can't seem to dig up an actual image file either, which tells me that maybe there isn't one. More to the point, using the "apply update.zip from SD" option vice the typical select .zip from SD.

Can someone say Clockworkmod Recovery 3???
http://forum.xda-developers.com/attachment.php?attachmentid=490785&d=1295154563
Also I have a tutorial out on how to flash recoveries straight from a terminal emulator instead of having to fastboot so...
http://forum.xda-developers.com/showthread.php?t=974590
Keep in mind this is my tutorial so if you like it and you think it was helpful just thank me.
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App

I had it in a thread when I asked the question. MusicMan posted it up but now its gone. I will ask him if he can post it here so we can get you all ready

iDaZzLeFatHoeZz said:
Can someone say Clockworkmod Recovery 3???
http://forum.xda-developers.com/attachment.php?attachmentid=490785&d=1295154563
Also I have a tutorial out on how to flash recoveries straight from a terminal emulator instead of having to fastboot so...
http://forum.xda-developers.com/showthread.php?t=974590
Keep in mind this is my tutorial so if you like it and you think it was helpful just thank me.
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App
Click to expand...
Click to collapse
Thanks a bunch dude!!
Where did you get this? Did koush make it?

It was compiled by someone in the Clockwork 3 Alpha thread but the one the OP posted was EXTREMELY UNSTABLE, so someone posted another link to a VERY STABLE version and that is the one I linked you to.
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App

iDaZzLeFatHoeZz said:
Can someone say Clockworkmod Recovery 3???
http://forum.xda-developers.com/attachment.php?attachmentid=490785&d=1295154563
Also I have a tutorial out on how to flash recoveries straight from a terminal emulator instead of having to fastboot so...
http://forum.xda-developers.com/showthread.php?t=974590
Keep in mind this is my tutorial so if you like it and you think it was helpful just thank me.
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App
Click to expand...
Click to collapse
if I don't have S-off, how do I flash clockworkmod 3.xx?
please help.
and if you can tell me the easiest way to do s-off, because the one on here is way to complicated.
thank you

coszy said:
if I don't have S-off, how do I flash clockworkmod 3.xx?
please help.
and if you can tell me the easiest way to do s-off, because the one on here is way to complicated.
Click to expand...
Click to collapse
There is no way to (permanently) flash clockworkmod without S-OFF.
There is only one way to achieve S-OFF. It's not that complicated. You download an ISO CD image, burn it to CD, follow the instructions on the screen. Just read the S-OFF thread so you know what to do with the timing of hitting the power button on your phone.
JTB

JTownBrewer said:
There is no way to (permanently) flash clockworkmod without S-OFF.
There is only one way to achieve S-OFF. It's not that complicated. You download an ISO CD image, burn it to CD, follow the instructions on the screen. Just read the S-OFF thread so you know what to do with the timing of hitting the power button on your phone.
JTB
Click to expand...
Click to collapse
thank you for the response, I will give it a try and will post the result after it.

Found "recovery-clockwork-2.5.0.7-espresso.img" file.
Just Flashed it with Terminal Emulator.
-commands-
su
flash_image recovery /sdcard/recovery-clockwork-2.5.0.7-espresso.img
Should say writing files and a bunch of hex numbers and letters
about 10 lines or so.
you can't flash the recovery.zip or recovery file from inside the zip they don't work and will make your recovery not work.
Link of website:http://mirrorbrain.cyanogenmod.com/cm/recoveries/
Link of img:recovery-clockwork-2.5.0.7-espresso.img

Just flashed the above file and it works. I did it from fastboot though.

NIICE waiting long time for this and works great

This worked for me. My power button quit working so I'm getting a new slide in the mail an had to get the rom I was using off an unroot which was harder than normal since my power button doesn't work. But I followed this an all is good. Thank-you.
Sent from my T-Mobile myTouch 3G Slide using XDA App

[Q] Flash Clockwork 2.5.0.7

I have s-off and I flashed Clockwork 3.0.0.5 as a .img file through terminal emulator. This version is extremely buggy though and some features dont work. I want to know how I can get 2.5.0.7 back onto my phone because the only way I know of which I tried was through ROM Manager but that did not work. Any help is greatly appreciated, thank you!!

http://www.koushikdutta.com/2010/02/clockwork-recovery-image.html
|
v
"MyTouch Slide"
http://mirrorbrain.cyanogenmod.com/cm/recoveries/recovery-clockwork-2.5.0.7-espresso.zip
Try that out?
I don't know if that'll be permanent or work at all, though.
EDIT: Did a minuscule amount of research and ran into this thread. Might have to take a peak thru there. http://forum.xda-developers.com/showthread.php?t=996125

All I can do is put 2.5.0.7 as an update.zip onto my SD card and boot into 3.0.0.5 then apply the update.zip to get into 2.5.0.7...is there a way to just permanently flash 2.5.0.7? Thanks.

Why use 2.5.0.7 when this: http://forum.xda-developers.com/attachment.php?attachmentid=490785&d=1295154563 build of cwm3.0.0.5 works flawlessley?
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App

Whoareyou said:
Why use 2.5.0.7 when this: http://forum.xda-developers.com/attachment.php?attachmentid=490785&d=1295154563 build of cwm3.0.0.5 works flawlessley?
Sent from my T-Mobile myTouch 3G Slide using XDA Premium App
Click to expand...
Click to collapse
Thats the thing that version of clockwork does not work flawlessly for me...everytime i try to do a nandroid backup with 3.0.0.5 it says i have no sd-ext partition but i do because i use a2ext. 2.5.0.7 backs up my sd-ext fine. Also, 3.0.0.5 gives me an error everytime i try to flash a radio update and 2.5.0.7 does not. I just want to know if i can permanently flash 2.5.0.7!!

pettigrew95 said:
I just want to know if i can permanently flash 2.5.0.7!!
Click to expand...
Click to collapse
Read this. Go down to post #5.
JTB

Thanks for the link I have the .img but for some odd reason I can't flash it through terminal emulator
After I run "#flash_image recovery /sdcard/recovery.img" I get an error saying #flash_image: command not found
I'm running NB_Mod-2.15, whats the problem here?

pettigrew95 said:
I'm running NB_Mod-2.15, whats the problem here?
Click to expand...
Click to collapse
I guess you don't have flash_image installed. I never do it that way, I use fastboot instead.
You should be able to get the flash_image program from some of the rooting method downloads.
JTB

Flashing New Radio

I downloaded Gingerbread 2.3.3 on my Rooted Evo 4G as per xHausx thread. Everything went well.
I am about to flash the Radio he has in his thread here >>
Standalone Radio PC36IMG (must be flashed through the hBoot/fastboot)
Evo Radio Version 2.15.00.04.08
(MD5 1ECE6F6BC355AFB721BA7264F82DD1E7)
-I downloaded the file using my Evo and it is a ilivid.exe file.
- I renamed it PCM36IMG.zip in Root Explorer
I don't know if the above 2 steps I did are correct, which is why I am asking here.
Do I have to use my pc to achieve the Radio Flash, or can it all be done using my Evo.
Any help is appreciated.
Thanks in advance.
If this has been discussed already, just point the way.

You put the file on ur your evo (you dont need root explorer) and boot into bootloader then in bootloader go to fastboot and then it says start update and click vol up for yes
Sent from my PC36100 using XDA Premium App

Did I rename it properly?
Don't you need root explorer or similar to rename, and to download zip from?
In addition, the power button submits your choice.

No you dont need root explorer and yes you press power to go to fastboot but one you have the file on your sd card go to fastboot and then it says update and press power up
Sent from my PC36100 using XDA Premium App

And do NOT pull the battery for any reason. It will hang on a stock recovery screen the reboot and finish updating

No you didnt name it right its PC36IMG (no zip) you misspelled it wrong u put a M in front of the 3
Sent from my PC36100 using XDA Premium App

You could get them from this thread they can be flashed in recovery thats what I used they work .
http://forum.xda-developers.com/showthread.php?t=715485
Sent from my PC36100 using XDA App

linsalata28 said:
You could get them from this thread they can be flashed in recovery thats what I used they work .
http://forum.xda-developers.com/showthread.php?t=715485
Yes please get them from Caulkins thread and do some reading thru the thread before flashing.....
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Sent from my EVO rocking Evervolv Gingerbread

Thanks everyone for your input.
I downloaded the Radio/WiMax combo but when I went into recovery and chose the .zip file, it said checking radio, but then I got the default bootloader screen again.
I clicked Reboot & Install after the download was complete and nothing. Just get the Rom Manager Home screen.
Will try later again after I figure this out.
Update:
I am in the process of flashing that zip and is in progress.
Will see what happens.
No luck.
I'm done for now. Don't know why I'm having so many issues as compared to flashing Gingerbread??
UPDATE!
SUCCESS FINALLY!!
- I downloaded the File in xHausx thread >>
Firmware:
Must be flashed through hBoot/Fastboot! Not Recovery.
PC36IMG - Radio, WiMAX and PRI Updates (MD5: 2E5C63EA59891A69F6D55C257CF165D5)
- I renamed it PC36IMG.zip using Root Explorer
- I moved PC36IMG.zip to the Root of the SD card using Root Explorer by selecting 'Move', then going to 'sd' then Pasting PC36IMG.zip there
- I used QuickBoot and entered HBoot and FastBoot mode
- PC36IMG.zip was recognized
- I pressed the 'Vol Up' key to acknowledge 'Yes' to continue with PC36IMG.zip (@jadden....Now I know what you meant by ''pressing vol up to start download )
- After Update was completed, I pressed vol up for Yes to Reboot
- Evo started up and I checked the Radio, etc. and SUCCESS!!
One of the issues I had before was that I didn't put the PC36IMG.zip into the Root of my sd card.This is why FastBoot didn't recognize the .zip
After much time spent with having issues, and after reading the help I got here, and Googling, the whole Process of FastBoot took 2 minutes!!
Thanks for everyone's input!
I still don't know why I couldn't use Rom Manager Recovery as suggested regarding the Radio files from Caulkins thread. I must have missed something. Maybe I should have used Recovery in Quick Boot I guess. But a moot point since I was able to use FastBoot regarding the link to the Radio in xHausx thread.............

You guessed it, I dropped the Evo and the Screen shattered!!
After All this Work......UnF'nBelievable!!
I have TEP so I'll have to order another one.
I had my Evo running so nicely.
I'll order it not activated, install Root and Install the Deodexed Gingerbread version as I did prior.
I would love to just have the Glass/Digitizer replaced, But that may be more trouble than it's worth..................

Yeah but if you get it replaced they will give you an evo that has official gingerbread which can't be rooted yet.
Sent from my PC36100 using XDA Premium App

jadden said:
Yeah but if you get it replaced they will give you an evo that has official gingerbread which can't be rooted yet.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Well, That Sucks!
I thought maybe it wouldn't have Gingerbread in it, and I'd have to do an OTA update myself, which I wasn't going to do.
Hopefully there will be a Root available soon........
Btw, if it does come with GB installed, can I install Froyo and then Root?
Update:
I just called Asurion, and they have Evos in stock. Will be shipping out tomorrow, 5/6 Monday.
Since the Official Gingerbread is also being made available tomorrow, and I asked that my replacement Evo Not be activated, it will probably be shipped with Froyo installed. Which would be just the way I like it..................

after you flash it the radio , how do you know it has been flash, what has been changed that you can see and where can i see it to make sure??

skater4109 said:
after you flash it the radio , how do you know it has been flash, what has been changed that you can see and where can i see it to make sure??
Click to expand...
Click to collapse
Go to >>
- Settings
- Software Information
- Baseband version - (mine says 2.15.00.05.02)

Flashing 2.15.00.08.08
How to flash new radio refer this link
http://forum.xda-developers.com/showthread.php?t=715485
I've tried through the cwm and it says successful but after the check has not changed the baseband

Biker1 said:
You guessed it, I dropped the Evo and the Screen shattered!!
After All this Work......UnF'nBelievable!!
I have TEP so I'll have to order another one.
I had my Evo running so nicely.
I'll order it not activated, install Root and Install the Deodexed Gingerbread version as I did prior.
I would love to just have the Glass/Digitizer replaced, But that may be more trouble than it's worth..................
Click to expand...
Click to collapse
Ouch!! Sorry bro

This is a zombie thread. Ie back from the dead. Look at the dates of the posts.
Sent From My Pocket

[Radios][mod] HTC Glacier/ Mytouch 4g radios. (1/24/13)

HTC GLACIER / MYTOUCH RADIOS
Hey All!
I saw that quite a few requests were coming through for the radios for this device so I thought I would spend a few minuets and pull the ones that I could find for you all. All I did was download the individual zips that were listed in the "ALL PD15IMG" thread in the general section. I think there is a couple of radios missing so please don't complain. Since I no longer have a working Mytouch a few of the files will be uploaded labeled as the android build they accompanied when they were released. If someone wants to install these I can change what the version numbers are in my OP and on Dev Host for you all.
As always proceed at your own risk. I am not responsible for bricked devices!!!
Instructions
1. Download radio
2. Move radio to the folder where you keep your ADB files. For most people this will be the platform-tools folder inside of the android sdk.
3 Rename the radio from xxx.img to radio.img to keep things simple
4. It is EXTREMELY IMPORTANT that you check that the md5 sum matches before flashing the radio.
5. Boot into Fasboot and connect your phone via your USB cable
6. Using command prompt navigate to the folder where you placed the radio in step 2.
7. Type this command then hit enter..... Fastboot flash radio radio.img
8. Reboot and enjoy
The Downloads
Radio from the 2.2.1 Zip
http://d-h.st/iTm
MD5 Sum: 61a2878b5e04cf4161c49a3ef182042a
Radio from 2.3.4 Zip #1
http://d-h.st/LX7
MD5 Sum: 92eae0f653f705ea7af40650068e3e85
Radio from 2.3.4 Zip #2
http://d-h.st/0X1
MD5 Sum: 220528cbb349dc2f267b54ca3685c9d2
Radio - 12.58.60.25_26.11.04.03
http://d-h.st/10V
MD5 Sum: 92eae0f653f705ea7af40650068e3e85
Radio - 12.62.60.27_26.13.04.19
http://d-h.st/S9t
MD5 Sum: 220528cbb349dc2f267b54ca3685c9d2
Once I know what All the different radios are. They will be listed as oldest first to the newest being last. I hope this helps some of you out!​

Thanks! You are the best

AWESOME!

Failed on flashing radio.img
I need some help, I have try fastboot to flash the new radio image and it failed.
The radio image is in the android folder call radio.img. I have follow the exact detail on this site.
I have dl multiply time and still getting the same failed message.
I have also try ADB and it fail as well. Here is the screenshot for ADB/ Fastboot
In adb the image is name PD15IM.zip and it place in the android folder platform-tools
I follow this link: http://forum.xda-developers.com/showthread.php?t=1059347
Right now I'm ran out off option any help would be great.
My system TM4G- rooted stock ROM GB2.3.4

Re: [Radios] HTC Glacier/ Mytouch 4g radios. (1/24/13)
1. You can't use adb to flash a radio. So the second part of your post doesn't matter.
2. Mac is a little different than everything else. I believe you have to put a ./ in front of every command. Anyways here is a guide that should help you out
http://forum.xda-developers.com/showthread.php?t=1917237&page=6
Sent from my Nexus⁴

mark manning said:
1. You can't use adb to flash a radio. So the second part of your post doesn't matter.
2. Mac is a little different than everything else. I believe you have to put a ./ in front of every command. Anyways here is a guide that should help you out
http://forum.xda-developers.com/showthread.php?t=1917237&page=6
Sent from my Nexus⁴
Click to expand...
Click to collapse
mark manning,
Yes have try the site you gave me and it the same failed message.
So I decided to try in the PC and it the same failed message as well.
Any other way to try something different or is it my phone that is causing this fail message.
What other option do I need to look into in my phone.
Thanks for your help.

Re: [Radios] HTC Glacier/ Mytouch 4g radios. (1/24/13)
fyaajster said:
mark manning,
Yes have try the site you gave me and it the same failed message.
So I decided to try in the PC and it the same failed message as well.
Any other way to try something different or is it my phone that is causing this fail message.
What other option do I need to look into in my phone.
Thanks for your help.
Click to expand...
Click to collapse
Just make sure you have adb set up properly. The files and commands on my side works
Sent from my Nexus⁴

@mark manning, could you please also upload the PD15IMG.zip files? somehow the fastboot method does not work even I followed the exact steps described but the zip method works. Any ideas?

Re: [Radios] HTC Glacier/ Mytouch 4g radios. (1/24/13)
taodan said:
@mark manning, could you please also upload the PD15IMG.zip files? somehow the fastboot method does not work even I followed the exact steps described but the zip method works. Any ideas?
Click to expand...
Click to collapse
I'll look into it later when I get home
Sent from my Nexus⁴

mark manning said:
Just make sure you have adb set up properly. The files and commands on my side works
Sent from my Nexus⁴
Click to expand...
Click to collapse
mark manning, Here what I have done I re-format my sd card and I try again with fastboot and it still no go.
I decided to try adb again and this time it work with adb very strange as i have no clue as to what happen, it could be that the card need to be format.
Thanks for putting the radio.img up.

Re: [Radios] HTC Glacier/ Mytouch 4g radios. (1/24/13)
fyaajster said:
mark manning, Here what I have done I re-format my sd card and I try again with fastboot and it still no go.
I decided to try adb again and this time it work with adb very strange as i have no clue as to what happen, it could be that the card need to be format.
Thanks for putting the radio.img up.
Click to expand...
Click to collapse
What did you format it to?
Sent from my Nexus⁴

I use CWM to format the sd card if that make any different.

nvm got it, just had to update to hb 85

2 questions
* how to i know what radio i'm using , when i got my phone from T-mobile, it was stock 2.3.4
* do ROMs change ( or have the ability to ) a radio?
thinking about flashing one because i get good signals everywhere except in my house -___-

NovaxxBite said:
2 questions
* how to i know what radio i'm using , when i got my phone from T-mobile, it was stock 2.3.4
* do ROMs change ( or have the ability to ) a radio?
thinking about flashing one because i get good signals everywhere except in my house -___-
Click to expand...
Click to collapse
1)Your phone's radio information is in Settings ->About phone-> baseband version
2) Flashing a ROM does not change your phone's radio

i have the 1.17.531.2 RUU (TMobile myTouch 4G Stock):
baseband: 12.28b.60.140e_26.03.02.26_M
can someone upload this one? in case i decide to go back..
the one on the other xda radio thread ( and google ) are dead links

NovaxxBite said:
i have the 1.17.531.2 RUU (TMobile myTouch 4G Stock):
baseband: 12.28b.60.140e_26.03.02.26_M
can someone upload this one? in case i decide to go back..
the one on the other xda radio thread ( and google ) are dead links
Click to expand...
Click to collapse
Get your radio here: http://wiki.cyanogenmod.org/w/Glacier_Info

Details on each radio and what the differences are between them?

Re: [Radios] HTC Glacier/ Mytouch 4g radios. (1/24/13)
taodan said:
Get your radio here: http://wiki.cyanogenmod.org/w/Glacier_Info
Click to expand...
Click to collapse
Thanks for that, I'll throw this stuff up later tonight.
Sent from my Nexus⁴

Re: [Radios] HTC Glacier/ Mytouch 4g radios. (1/24/13)
jentzschman2000 said:
Details on each radio and what the differences are between them?
Click to expand...
Click to collapse
Details are impossible since radios are closed source. All you can really do is try them out for yourself a see the differences.
Sent from my Nexus⁴