Hey everyone.
Im looking for an accesory for my SGS3. I want to replace the plastic back cover with another one made from a different material, like leather if possible. Something like the back of the new Nexus 5 or the new back cover of the Note 3. Something that feels better to the touch and that is easier to hold and doesn't feel slippery when your hands have sweat.
Does anyone have any ideas? Has anyone replace their back cover with something different?
Suggestions?
Or maybe install something on top of the back. Another solution would be a case that protects the full phone.
Thanks.
There are vinyl skins available.
Search this forum for info.. :thumbup:
I had the same need. The standard back was too slippery. I tried various and then found one called the Incipio Feather. It's a very thin case which clips on and has a rubberised feel (a bit like the back of my old HTC Desire). You hardly notice its there, but it is a big improvement over the standard back.
On amazon UK its there for £5.99...
Just try glueing leather
So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
ZenithHammerhead said:
So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
Click to expand...
Click to collapse
I would wait until hard cases start coming out and just buy one.
migueldias94 said:
I would wait until hard cases start coming out and just buy one.
Click to expand...
Click to collapse
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
ZenithHammerhead said:
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
Click to expand...
Click to collapse
Well, the OnePlus is essentially the same device and its getting backplate alternatives, so we could see that coming to the Find 7 in the near future, but i don't know. Or maybe some third-party company starts to make them, like dBrand for example.
Do an Easy Cover Hack
ZenithHammerhead said:
So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
Click to expand...
Click to collapse
I thought the same about the stock backplate. I loved the feel of the Easy Cover but I don't like flip covers. So I cut the flip part of the cover off. Just cut the flip part along the crease where it naturally folds over. Then, using a nice sharp pair of scissors, Trim the remaining faux leather so it is flush with the plastic edge underneath. The side with the volume rocker has the plastic underneath the faux leather extending past the side of the phone. Just use some sand paper to make it flush with the part that is indented to accommodate the volume rocker. I found that the plastic overhang was reducing faster than the faux leather. Just sand some of the plastic then use the scissors to cut it flush again and continue until the plastic overhang is gone and flush with the sides of the phone. Then you might want to rough up the plastic edge on the power button side. This makes both sides uniform and gives better grip. When everything looks nice and flush use a lighter to melt any frayed faux leather. It probably took me 30 mins because I was a little obsessed with making it look nice. The end result is that it's flush with the left and right sides. It doesn't look hacked together at all. The only asymmetry is that the side that had the flip doesn't have stitching. I've attached pictures. Hopefully it works since I have less than 10 posts.
Wow, that's really well done Doc!
Might have myself a little weekend project here.
I'm really waiting for a thin case like Spigen or Incipio make for the Galaxy series. Nice matte feel for better grip and very thin.
the tchichs
Thnaks, I'm happy with the results. Almost everyone who I've shown my new telephonic smart device to has commented on how good the backplate feels. Give it a try. I'm not super craftsy or anything so anybody should be able to do it. The most tedious part was sanding down the lip on the volume rocker side. I used coarse grit sandpaper but if you had a rotary tool it would go much faster.
-Sent from my rooted, bootloader unlocked, overclocked Blendtec blender running Android 5.0 Lollipop
Finf 7 quad HD backlpate
ZenithHammerhead said:
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
Click to expand...
Click to collapse
The Find 7 Premium has the carbon fiber back-plate. That is suppose to feel more secure. Maybe you can get it already somehow from China.
I have been able to shoot video with the flipcover, ARe you sure you can't acclimate to it? It's also not a bad idea in the protection department.
If you tilt your phone to the right instead of the left and hold the cover closed from the bottom it's not too awkward (for me anyway).
The white back actually has a really nice texture and is not as slippery as the black one. I actually want to see about ordering a replacement but in black. I think it would look cool, black front, white middle molding and black back I hope they start to sell just the backs. I emailed Oppstyle about it. Hopefully they will sell me a black one
I have the white back and still thought it was a little too slippery. I bought a black Nillkin case and Nillkin glass screen protector. The case is a nice textured softouch plastic. It fits great does not add much girth and no more slipperiness. Looks great with white peaking through the speaker and camera cutouts.
http://www.ebay.com/itm/Nillkin-Mat...Cell_Phone_PDA_Cases&var=&hash=item4d1b84f4c2
The glass protector went on easy but I had a bubble that I could not get out. After 2 days the bubble went away with occasional rubbing. Glass feels great but shows fingerprint oil more than stock. I don't like the ear piece/sensor cut out, I would have preferred a separate cut out for each. Seems kind of stupid putting glass on to protect gorilla glass butt people always loved the glass protectors so I thought I would try it. Since the case and protector came to $19 together, what the heck, give it a try. Shipping from China to SoCal was about 10days..
http://www.ebay.com/itm/231192733607?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I have this exact setup. Can confirm the glass is very nice and the case is much better than the eBay ones.
Sent from my X9006 using XDA Free mobile app
gedster314 said:
I have the white back and still thought it was a little too slippery. I bought a black Nillkin case and Nillkin glass screen protector. The case is a nice textured softouch plastic. It fits great does not add much girth and no more slipperiness. Looks great with white peaking through the speaker and camera cutouts.
http://www.ebay.com/itm/Nillkin-Mat...Cell_Phone_PDA_Cases&var=&hash=item4d1b84f4c2
The glass protector went on easy but I had a bubble that I could not get out. After 2 days the bubble went away with occasional rubbing. Glass feels great but shows fingerprint oil more than stock. I don't like the ear piece/sensor cut out, I would have preferred a separate cut out for each. Seems kind of stupid putting glass on to protect gorilla glass butt people always loved the glass protectors so I thought I would try it. Since the case and protector came to $19 together, what the heck, give it a try. Shipping from China to SoCal was about 10days..
http://www.ebay.com/itm/231192733607?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
The Niklin glass SP doesn't has cut out for front camera.Would that have any impact for front camera usage?Intend to get one for myself.....
aw1007 said:
The Niklin glass SP doesn't has cut out for front camera.Would that have any impact for front camera usage?Intend to get one for myself.....
Click to expand...
Click to collapse
Most people have reported that it has very little to no effect. I've barely used the front camera but I just looked at it and it looked fine to me.
Have anyone found a Place to order replacement back covers, I bought a midnight but would like to try the white and carbonfiber backcover to. Don't have the phone right now as I had to send it back to Oppostyle to get it replaced, but they still don't have any stock. Asked them about getting carbonfiber or white back covers, they checked with Oppo and they answered that they had no plans to sell back covers seperately.
fremar said:
Have anyone found a Place to order replacement back covers, I bought a midnight but would like to try the white and carbonfiber backcover to. Don't have the phone right now as I had to send it back to Oppostyle to get it replaced, but they still don't have any stock. Asked them about getting carbonfiber or white back covers, they checked with Oppo and they answered that they had no plans to sell back covers seperately.
Click to expand...
Click to collapse
Kedros is doing a mass / bulk order of fake-carbon / third-party back covers over at the official oppo forums right now.
If you want to snatch a carbon look-a-like cover, or simply midnight / white spares, thats the place you got to go.
Kedros charges 4.80€ per cover + 1€ shipping (china international) + 5% paypal fees.
Don't think you will find it any cheaper elsewhere.
MrColdbird said:
Kedros is doing a mass / bulk order of fake-carbon / third-party back covers over at the official oppo forums right now.
If you want to snatch a carbon look-a-like cover, or simply midnight / white spares, thats the place you got to go.
Kedros charges 4.80€ per cover + 1€ shipping (china international) + 5% paypal fees.
Don't think you will find it any cheaper elsewhere.
Click to expand...
Click to collapse
Ok, that sounds interesting, but I can't register on the oppoforums for some reason.
fremar said:
Ok, that sounds interesting, but I can't register on the oppoforums for some reason.
Click to expand...
Click to collapse
Yeah for some reason I can't register through the web.
Use tapatalk and search for oppo, there you can register for an account
Same problem from tapatalk, it just opens the browser to register for me.
fremar said:
Same problem from tapatalk, it just opens the browser to register for me.
Click to expand...
Click to collapse
I downloaded the app, and that's how I got an account in.
I would love one with a sandstone texture like the OnePlus One.
So I got this case http://goo.gl/o5bKDZ and I'm very pleased with the front cover, however I'm not to fond of the textile feeeling back (battery)door part. So I'm wondering if there are any flip door cases wich still got the original rubbery gripping texture left or is there none to find?
I think there all the same my friend. I got the royal blue one and it has the same textured back
Hmm that's to bad, might have to build something myself XD.
Hello
I'm a OP user since October 2014, and i never wanted to use a case or something like that because it makes the phone bigger and ugly
I Got the JBL pack, but after almost a year of using, i scratched the back of the phone many times so i decided to buy another battery cover and a case that is thin and looks nice
So i decided this time to buy the White Battery Cover and a Pelosi Case
As in the attached pics, the white cover( 10$ form aliexpress) came without NFC or buttons so i just removed them from my old cover and put it in, it looks and fells nice. For the Pelosi case (8$ from aliexpress): i'm happy with it, i can feel the touch of my old black cover when i touch it, it's thin, and the it's not ugly on the phone
It's my first thread, be nice please
Like written in the topic.
Does anybody know a shop were it is possible to buy LG v20 backcovers?
I found a seller on eBay but only verizon branded. I'd like to have a clean one (LG brand is OK).
My plan is to laseringrave my own personalised theme.
So pleas give me a link.
Best regards from Germany
Nillkin Frosted Shield Matte Plastic Ultra Thin Slim Light Fit Case. Check that out on amazon. It is slim, looks classy and premium.
I think the OP is referring to the original back cover attached to the phone chassis, not a protective cover or case.
Rubiicon is totally right.
I talked about the batterycover that u can take off.
I found one on eBay but it has the verizon logo on it. I'm searching for a blank one or whit LG logo only.
The Real said:
Rubiicon is totally right.
I talked about the batterycover that u can take off.
I found one on eBay but it has the verizon logo on it. I'm searching for a blank one or whit LG logo only.
Click to expand...
Click to collapse
For some silly reason, I wanted a pink phone (tired of black or silver). I find the brow and chin. http://www.ebay.com/itm/272609599251 , Does anybody think I can grab a Verizon LG V20 back cover, sand it and painting it a matching pink?
The verizon logo seams to be laser engraved. Don't know how far u have to sand it till its totally gone. And is the texture also the same like the backcover.
Idk how much time you have on your hands. BUT possible anodize the back door.
Thats my current project. I have all 3 main bezel parts soaking in Dye. Hoping in 3 weeks when I pull them out they were able to seep deep enough under the external anodizing seal layer (DOUBTFUL) If not then Im gonna attempt to anodize all three (Will have to replace the NFC ring on the back door). I hesitate because the sealing process requires you to boil the parts for 15 mins after anodizing, and the top and bottom bezel have plastic and I dont know the melting temp of this plastic. But only $40 project that will give me knowledge for the future.
@DarkestSpawn
I like your initiative, that's exactly the kind of thing I would try.
Experimentation is educational and fun. Even better if it's successful.
Be wary of boiling the plastic parts, they probably won't take much more than 60°C before deforming.
Good luck with your project, make sure you update here with your results.
An other user in an older backcoversection found covers without verizon logo. It has the b&o brand but this is much better then verizon
http://www.ebay.com/itm/Housing-Rear-Panel-Battery-Cover-for-LG-V20-H990-H918-US996-VS995-F800-With-NFC-/152534885473?var=451908450011&hash=item2383c9a461:g:icgAAOSw~y9ZCbRr
Here's another
http://www.ebay.co.uk/itm/262970275414
Well, soaking in dye was a negative. Tried doing a thin layer of spray paint, parts would line up right felt weird, now I have a thin vinyl skin on it. PAIN IN THE ASS to install perfectly(see attachments) in which case I didn't do it perfect. The door is ridiculous to get a good alignment. I'm gonna see with these extra useless spare painted parts if I can remove the plastic without damaging, if yes then I'll attempt the anodizing. Otherwise hoping the v30 will be spec wise way better, still metal, still a removable battery, and anodized blue lol.
Lmao!
At least you tried. The rear cover looks OK, can't really tell much in the 2nd pic.
Good luck getting LG to release a blue V30 :laugh:
After some talk with co-workers, I was very cautious with an exact-o knife to trim a very small hang over portion around the camera ring, finger print power ring and sides, and used the spare bottom bezel skin, Its now done very well and am extremely happy with it.
The link is below if anyone wants to look at options.
http://www.ebay.com/itm/SopiGuard-C...hash=item25caaa6ee6:m:m0S8x35cF7l7pEXA9QiabZg
I would have just used a Dbrand skin I have one on my XPS 15 and it works great. Last I checked they make them for the V20.
rubiicon59 said:
Here's another
http://www.ebay.co.uk/itm/262970275414
Click to expand...
Click to collapse
I bought from this store, cover came scratched and chipped, not recommended!