So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
ZenithHammerhead said:
So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
Click to expand...
Click to collapse
I would wait until hard cases start coming out and just buy one.
migueldias94 said:
I would wait until hard cases start coming out and just buy one.
Click to expand...
Click to collapse
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
ZenithHammerhead said:
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
Click to expand...
Click to collapse
Well, the OnePlus is essentially the same device and its getting backplate alternatives, so we could see that coming to the Find 7 in the near future, but i don't know. Or maybe some third-party company starts to make them, like dBrand for example.
Do an Easy Cover Hack
ZenithHammerhead said:
So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
Click to expand...
Click to collapse
I thought the same about the stock backplate. I loved the feel of the Easy Cover but I don't like flip covers. So I cut the flip part of the cover off. Just cut the flip part along the crease where it naturally folds over. Then, using a nice sharp pair of scissors, Trim the remaining faux leather so it is flush with the plastic edge underneath. The side with the volume rocker has the plastic underneath the faux leather extending past the side of the phone. Just use some sand paper to make it flush with the part that is indented to accommodate the volume rocker. I found that the plastic overhang was reducing faster than the faux leather. Just sand some of the plastic then use the scissors to cut it flush again and continue until the plastic overhang is gone and flush with the sides of the phone. Then you might want to rough up the plastic edge on the power button side. This makes both sides uniform and gives better grip. When everything looks nice and flush use a lighter to melt any frayed faux leather. It probably took me 30 mins because I was a little obsessed with making it look nice. The end result is that it's flush with the left and right sides. It doesn't look hacked together at all. The only asymmetry is that the side that had the flip doesn't have stitching. I've attached pictures. Hopefully it works since I have less than 10 posts.
Wow, that's really well done Doc!
Might have myself a little weekend project here.
I'm really waiting for a thin case like Spigen or Incipio make for the Galaxy series. Nice matte feel for better grip and very thin.
the tchichs
Thnaks, I'm happy with the results. Almost everyone who I've shown my new telephonic smart device to has commented on how good the backplate feels. Give it a try. I'm not super craftsy or anything so anybody should be able to do it. The most tedious part was sanding down the lip on the volume rocker side. I used coarse grit sandpaper but if you had a rotary tool it would go much faster.
-Sent from my rooted, bootloader unlocked, overclocked Blendtec blender running Android 5.0 Lollipop
Finf 7 quad HD backlpate
ZenithHammerhead said:
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
Click to expand...
Click to collapse
The Find 7 Premium has the carbon fiber back-plate. That is suppose to feel more secure. Maybe you can get it already somehow from China.
I have been able to shoot video with the flipcover, ARe you sure you can't acclimate to it? It's also not a bad idea in the protection department.
If you tilt your phone to the right instead of the left and hold the cover closed from the bottom it's not too awkward (for me anyway).
The white back actually has a really nice texture and is not as slippery as the black one. I actually want to see about ordering a replacement but in black. I think it would look cool, black front, white middle molding and black back I hope they start to sell just the backs. I emailed Oppstyle about it. Hopefully they will sell me a black one
I have the white back and still thought it was a little too slippery. I bought a black Nillkin case and Nillkin glass screen protector. The case is a nice textured softouch plastic. It fits great does not add much girth and no more slipperiness. Looks great with white peaking through the speaker and camera cutouts.
http://www.ebay.com/itm/Nillkin-Mat...Cell_Phone_PDA_Cases&var=&hash=item4d1b84f4c2
The glass protector went on easy but I had a bubble that I could not get out. After 2 days the bubble went away with occasional rubbing. Glass feels great but shows fingerprint oil more than stock. I don't like the ear piece/sensor cut out, I would have preferred a separate cut out for each. Seems kind of stupid putting glass on to protect gorilla glass butt people always loved the glass protectors so I thought I would try it. Since the case and protector came to $19 together, what the heck, give it a try. Shipping from China to SoCal was about 10days..
http://www.ebay.com/itm/231192733607?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I have this exact setup. Can confirm the glass is very nice and the case is much better than the eBay ones.
Sent from my X9006 using XDA Free mobile app
gedster314 said:
I have the white back and still thought it was a little too slippery. I bought a black Nillkin case and Nillkin glass screen protector. The case is a nice textured softouch plastic. It fits great does not add much girth and no more slipperiness. Looks great with white peaking through the speaker and camera cutouts.
http://www.ebay.com/itm/Nillkin-Mat...Cell_Phone_PDA_Cases&var=&hash=item4d1b84f4c2
The glass protector went on easy but I had a bubble that I could not get out. After 2 days the bubble went away with occasional rubbing. Glass feels great but shows fingerprint oil more than stock. I don't like the ear piece/sensor cut out, I would have preferred a separate cut out for each. Seems kind of stupid putting glass on to protect gorilla glass butt people always loved the glass protectors so I thought I would try it. Since the case and protector came to $19 together, what the heck, give it a try. Shipping from China to SoCal was about 10days..
http://www.ebay.com/itm/231192733607?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
The Niklin glass SP doesn't has cut out for front camera.Would that have any impact for front camera usage?Intend to get one for myself.....
aw1007 said:
The Niklin glass SP doesn't has cut out for front camera.Would that have any impact for front camera usage?Intend to get one for myself.....
Click to expand...
Click to collapse
Most people have reported that it has very little to no effect. I've barely used the front camera but I just looked at it and it looked fine to me.
Have anyone found a Place to order replacement back covers, I bought a midnight but would like to try the white and carbonfiber backcover to. Don't have the phone right now as I had to send it back to Oppostyle to get it replaced, but they still don't have any stock. Asked them about getting carbonfiber or white back covers, they checked with Oppo and they answered that they had no plans to sell back covers seperately.
fremar said:
Have anyone found a Place to order replacement back covers, I bought a midnight but would like to try the white and carbonfiber backcover to. Don't have the phone right now as I had to send it back to Oppostyle to get it replaced, but they still don't have any stock. Asked them about getting carbonfiber or white back covers, they checked with Oppo and they answered that they had no plans to sell back covers seperately.
Click to expand...
Click to collapse
Kedros is doing a mass / bulk order of fake-carbon / third-party back covers over at the official oppo forums right now.
If you want to snatch a carbon look-a-like cover, or simply midnight / white spares, thats the place you got to go.
Kedros charges 4.80€ per cover + 1€ shipping (china international) + 5% paypal fees.
Don't think you will find it any cheaper elsewhere.
MrColdbird said:
Kedros is doing a mass / bulk order of fake-carbon / third-party back covers over at the official oppo forums right now.
If you want to snatch a carbon look-a-like cover, or simply midnight / white spares, thats the place you got to go.
Kedros charges 4.80€ per cover + 1€ shipping (china international) + 5% paypal fees.
Don't think you will find it any cheaper elsewhere.
Click to expand...
Click to collapse
Ok, that sounds interesting, but I can't register on the oppoforums for some reason.
fremar said:
Ok, that sounds interesting, but I can't register on the oppoforums for some reason.
Click to expand...
Click to collapse
Yeah for some reason I can't register through the web.
Use tapatalk and search for oppo, there you can register for an account
Same problem from tapatalk, it just opens the browser to register for me.
fremar said:
Same problem from tapatalk, it just opens the browser to register for me.
Click to expand...
Click to collapse
I downloaded the app, and that's how I got an account in.
I would love one with a sandstone texture like the OnePlus One.
Related
I just picked up the black silicone gel skin from the local Sprint store. They have about 4 different cases in stock, aside from this one they have the body glove case, a leather case, and a weird 2-piece plastic snap case 2-pack. Here are my impressions:
1. The fitment is perfect and all cutouts line up perfectly
2. The camera lens is recessed about 1mm from the edge
3. The texture is smooth as opposed to the leathery texture of Sprint Hero silicone skin (and it's thinner than the Hero skin)
4. The edges around the screen recess the screen a little over 1mm so the entire face is protected from a fall onto a flat surface
5. The edges around the screen overlap the screen seams by about .5mm
6. Overall the phone still feels thin and sleek in my opinion
7. As with any silicone skin, it's tough to get in/out of tight pockets
Edit: Photos by review site here: http://goo.gl/F9px
Can you post some pics?
i picked up this skin tonight as well. i wish it was more grippy on the back as its so smooth it seems like it will be slippery. well, i have the skin but no evo until the evening tomorrow
knives of ice said:
i picked up this skin tonight as well. i wish it was more grippy on the back as its so smooth it seems like it will be slippery. well, i have the skin but no evo until the evening tomorrow
Click to expand...
Click to collapse
I was installing one on a customer's evo today and that was my main concern. Holding it I felt like I was going to drop it. It just felt too slippery. Personally I prefer our Body Glove case for the Evo. It had an over all better texture and I really like the appearance. Once I can finally take my evo home I will definitely be purchasing that case.
I don't think it's too slippery, but the case is too loose imho. It doesn't fit very snug on the phone. Hopefully with some sunlight/use it will shrink.
No pictures. Come on, this is the 21st century. Lets get some visuals.
knives of ice said:
i picked up this skin tonight as well. i wish it was more grippy on the back as its so smooth it seems like it will be slippery. well, i have the skin but no evo until the evening tomorrow
Click to expand...
Click to collapse
I have mine on now and you're right, the back is kind of smooth. I don't know what wizardry they used, but the edges are grippy as hell. I'm happy with that since I don't think I'll ever pick this phone up by only grabbing the back of case and the display on the phone.
Here are two pics of this case. I used my webcam, so I apologize for it looking a bit blue, the bad angle, and the graininess.
The Silicone case from Sprint is fantastic. Thought the 24 bucks one seemed kinda nice.
Fixter said:
The Silicone case from Sprint is fantastic. Thought the 24 bucks one seemed kinda nice.
Click to expand...
Click to collapse
I bought it too..but it was only 15 and change...at sprint? premier customer discount.
apristel said:
I bought it too..but it was only 15 and change...at sprint? premier customer discount.
Click to expand...
Click to collapse
You bought the 24.99 one for 15 bucks?
Fixter said:
You bought the 24.99 one for 15 bucks?
Click to expand...
Click to collapse
yes i sure did. came in a card board thing with a fake EVO (cardboard)...?
apristel said:
yes i sure did. came in a card board thing with a fake EVO (cardboard)...?
Click to expand...
Click to collapse
Wait I think we are misunderstanding here. The Black Silicone Case that the guy over there put the picture is 14.99. But there is another one with swirly pattern. That one is 24.99. Is that the one you got?
Fixter said:
Wait I think we are misunderstanding here. The Black Silicone Case that the guy over there put the picture is 14.99. But there is another one with swirly pattern. That one is 24.99. Is that the one you got?
Click to expand...
Click to collapse
lol i didnt get the swirly one...just the plain black one!
apristel said:
lol i didnt get the swirly one...just the plain black one!
Click to expand...
Click to collapse
Yea, thats what I thought. Though I never saw the Swirly One in the Sprint Store, but it is on the Sprint Online Store here is a link:
http://shop.sprint.com/NASApp/onlin...ryID=CZH5070R&topPageNumber=0&subPageNumber=0
aldo37 said:
I don't think it's too slippery, but the case is too loose imho. It doesn't fit very snug on the phone. Hopefully with some sunlight/use it will shrink.
Click to expand...
Click to collapse
My experience w/silicon cases in the past (Belkin ones on an iPod touch) has been the opposite, they either stay exactly the same or they loosen up and get floppier... Those that are multi-color tend to lose some of the dye over time too, around the edges. They do look cooler when they're new tho...
I think I'll get the black one from Sprint and I'll probably order that Amzer Argyle case when it's finally shipping... It's a different kinda rubber, seems stiffer than the silicon stuff but still flexible enough that you just slip the phone into it by stretching it (unlike any of the plastic cases), seems smoother too so it might be popular w/those that dislike the effect of the silicon skins on pockets. From what I've read on the reviews for the same type of case made for other phone models, it's actually a bit translucent and the argyle pattern doesn't stand out as much as it does in the photo. There's a Blackberry Amazon review that describes the material it's made of pretty well.
That Body Glove case might be grippy or rubbery on the back but it's still a plastic frame 2-piece case btw, there's one or two other threads on it. Probably slightly bulkier than the silicon ones.
I got the black one and the raspberry (hot pink) one for my wife. I did notice the case kind of put a small shadow on the front camera picture. I nipped off about 1/8" from it and it works fine now. Hope it doesn't cause it to come out easier now.
I found it interesting that it was HTC branded on the back.
Drewmungus said:
I found it interesting that it was HTC branded on the back.
Click to expand...
Click to collapse
hmm never noticed that until now
now i feel better about the case somehow
Skin protection
Thanks for the info
i have found this case at ebay for galaxy note and would like to hear your oppinion about it? maybe anyone has it and can leave some feedback
ebay link http://www.ebay.com/itm/Leather-Cas...ccessories&hash=item3371580d09#ht_5270wt_1270
I have the brown one and it looks elegant but mine doesn't fit well. I mean, I can hear some squeaking when I press on both sides and honestly it bothers me sometimes. I don't know if it's just mine though. The texture feels great and it protects the four corners of the phone, which in my opinion are the areas most likely to hit the ground first if you drop them. It's not stitched and I feel that overtime the sides might separate. I have not tried the free screen protector because I'm not into screen protectors at all. I just really like feeling the glass when I swipe, lol.
I've got a black one, really nice quality
was half the price of the samsung cover (well in New Zealand anyway...)
and much nicer, covers the back perfectly and protects from drops all around and looks really stylish. No magnets or clips to haggle with for flipping the cover.
Its true its not stitched around the corners which gives in a potential to separate, but it seems like a very thick kind of rubber type sealant edging, not cheap superglue type stuff, so very flexible and shouldnt seperate unless you bend it in ways it shouldnt go.
I've had mine for a couple of months and stick it in my pocket everyday, flip the cover over fully to the otherside all the time for holding/calling, got a nice felt material inside on the screen side of the cover, plastic holder for the phone but holds the phone very well but you can still get the phone out easily if needed.
The cover sits perfectly flat on the phone (standard back cover on my phone probably wont fit one of those non-oem aluminium covers which are slightly thincker I believe)
Arrived in a couple of weeks from an ebay seller in Hong Kong I think..
I recommend it! and hey, its only a few bucks so no big loss if its not your exact preference
thank you guys for very well-explained feedback samsung original flip cover cost same price as this cover, so i prefer buying this verus cover instead samsung flip
Dude, I too have this.. I'd say I am happy with it.. but then, have you had a look at Zenus GALAXY NOTE MASSTIGE BLOCK FOLIO ?? This one has a stand too.. and almost for same price..
My Verus has the "squeaking sound when I press on both sides"
sajavid said:
Dude, I too have this.. I'd say I am happy with it.. but then, have you had a look at Zenus GALAXY NOTE MASSTIGE BLOCK FOLIO ?? This one has a stand too.. and almost for same price..
My Verus has the "squeaking sound when I press on both sides"
Click to expand...
Click to collapse
nah i didnt like masstige folio case ;D btw is it comfortable to collapse forward cover side?
I did not get your question.. wt is it you want to understand / see?
EdgaBimbam said:
nah i didnt like masstige folio case ;D btw is it comfortable to collapse forward cover side?
Click to expand...
Click to collapse
If you mean if the front cover can easily flip to the back of the note I'd say yes and you could actually squeeze it flat not like the free flip cover that it leaves an extra front cover out the side so you can't really hold it flat comfortably. Also, the logo in the flip cover leaves a mark on the screen, but not really a biggy. It's either dirt or moisture because of the concavity, I'm not really sure. You can wipe it off easily though. I have mine for just a couple of weeks so maybe that'll disappear over time. And I agree, it's a good case for the price and you won't regret getting it.
I've attached some pictures for reference.
And a few more.
emignatius said:
If you mean if the front cover can easily flip to the back of the note I'd say yes and you could actually squeeze it flat not like the free flip cover that it leaves an extra front cover out the side so you can't really hold it flat comfortably. Also, the logo in the flip cover leaves a mark on the screen, but not really a biggy. It's either dirt or moisture because of the concavity, I'm not really sure. You can wipe it off easily though. I have mine for just a couple of weeks so maybe that'll disappear over time. And I agree, it's a good case for the price and you won't regret getting it.
Click to expand...
Click to collapse
thank you very much
Has anyone bought or tried this case? in looks very interesting as its so thin it may be comparable to buying something like the Bodyguardz skins without the hassle of sticking that stuff on.
http://www.ebay.co.uk/itm/1mm-Ultra...sesPouches&hash=item4165054cf6#ht_2462wt_1168
Got a few days ago, pretty good, very very thin but slippery. Did a quick video to show it in action.
http://www.youtube.com/watch?v=KG2HBa-62Rc
i've got one. its about 0.5mm thick in some parts, so the only thing its good for is protecting the phone's body from scratches. it offers no drop protection, and no camera protection, and its not grippy either.
i prefer my ringke slim case and my anymode pebble jelly case, theyre grippy and dont add much bulk, and offer decent protection for the corners of the phone (if you drop your phone, its more likely to land on a corner) and it goes slightly over the edges of the screen, so if your phone does land face first, the glass is less likely to touch the ground, making it less likely to shatter.
Thanks Souai, I had the ringke for my galaxy s2 and i found that after a while it started stretching out and not fit the phone properly. The reason why im so keen on these ultra thin ones is more as an alternative is the skin shields. ill check out the pebble case though.
looks similar to the Case Mate Barely There.
shohid1234 said:
Has anyone bought or tried this case? in looks very interesting as its so thin it may be comparable to buying something like the Bodyguardz skins without the hassle of sticking that stuff on.
http://www.ebay.co.uk/itm/1mm-Ultra...sesPouches&hash=item4165054cf6#ht_2462wt_1168
Click to expand...
Click to collapse
i have the Original Moshi Back Cover for my Note. man the Grip is awesome! really! i mean i have the white Note and u know the white Note has different back cover than the Black one. its so shinny and slippery! but this Moshi cover gives me the real grip! got that for about Rs 5000 (approx US $ 54), but its worth the money!
aami.aami said:
i have the Original Moshi Back Cover for my Note. man the Grip is awesome! really! i mean i have the white Note and u know the white Note has different back cover than the Black one. its so shinny and slippery! but this Moshi cover gives me the real grip! got that for about Rs 5000 (approx US $ 54), but its worth the money!
Click to expand...
Click to collapse
$54 seems a a lot for a case, the 1mm is just $4 including delivery.
lol 5000 INR is not 54$ its more than 100$ to my knowledge and also that for a case is too much IMHO...
Anyway I would have bought one if it was sold from Amazon . Looks nice
Yeah, I hate ebay and their bloody fees, Ive ordered one though , it'll take a few weeks for it to arrive, ill report back then.
shohid1234 said:
Has anyone bought or tried this case? in looks very interesting as its so thin it may be comparable to buying something like the Bodyguardz skins without the hassle of sticking that stuff on.
http://www.ebay.co.uk/itm/1mm-Ultra...sesPouches&hash=item4165054cf6#ht_2462wt_1168
Click to expand...
Click to collapse
I ordered some from ebay (the seller sold them in pairs) - one was cracked from the start and unusable, and the other was slightly warped from being stuffed in the padded envelope. I found them to be not very grippy, and the cut-out for the m/usb was quite sharp, and being as I rest the Note on my little finger when I hold it one-handed, painful!
Hope you have better luck than I did - I just use the Note bare-back now!
Towserspvm2000 said:
I ordered some from ebay (the seller sold them in pairs) - one was cracked from the start and unusable, and the other was slightly warped from being stuffed in the padded envelope. I found them to be not very grippy, and the cut-out for the m/usb was quite sharp, and being as I rest the Note on my little finger when I hold it one-handed, painful!
Hope you have better luck than I did - I just use the Note bare-back now!
Click to expand...
Click to collapse
Every time i buy a new phone get into a mad rush to buy cases for it, i use them for a week or two then ditch them because I prefer to use the phone bare, i'll probably do the same as you Towserspvm2000, but at below 3 quid a pop im not going to be losing out on much if it is crappy.
Just got this case from China. I like it. Simple and almost like it is bare. Only issue is the buttons are a little harder to push. But not a deal breaker. This is my third case. thinnest and the lightest. Not bad for $4US. Just got to make sure I don't drop it. More for scratch protection than anything.
hey guys, got the case and its pretty good but bloody slippery. Put up a youtube video to show it in action.
http://www.youtube.com/watch?v=KG2HBa-62Rc
Just came across a review for the Khomo Back Cover
Interesting...
Sent from my SGH-T999 using xda premium
Maybe...
Maybe this is what I have been looking for. Now I just have to find somewhere that can ship it to Sweden for a reasonable price.
Any tips?
I would so buy this if that logo isnt there. lol
^Yeah. Logo ruins this.
Xcor3 said:
I would so buy this if that logo isnt there. lol
Click to expand...
Click to collapse
One major flaw, it leaves the camera lens exposed so that it can be scratched every time you put your phone down. Would need a quick Sugru mod.
It looks like you could rub the logo off
i bought this on amazon for $6.99 its not bad. was kinda my last resort as i was looking for something to match my pebble blue but theres nothing out there that did so i went for utility. its definitely has more grip than OEM but not by much. its a soft touch type material. fits just like an oem though. more rigid too
Beako said:
It looks like you could rub the logo off
Click to expand...
Click to collapse
can,t already tried. i might try a sugar cube though(throwback to the RAZR days)
angie4u said:
looks nice but the material looks like it will attract dust like crazy.
Click to expand...
Click to collapse
it attracts more scratches(superficial can be wiped away) than dust
Got my back in... Love it, minus the damn khomo across the bottom, it's perfect for me
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Manufacturers need to make more of an effort if they insist on stamping their logos on the back of their parts? Especially when the logo looks like it was designed in about 3 minutes by a 12 year old....
O.P! Check out my camera mod! Hope this can be useful with your rubberized cover.
http://forum.xda-developers.com/showthread.php?t=1862307
Got the same battery cover myself. It doesn't provide more grip in all situations, but definitely provides more "feel" and less slippery than the original one as it's not gloss. What I mean by all situations is that most of the time I don't have a problem gripping the original gloss back, but it definitely becomes harder to grip (slippery) when my hands are too dry or have a little dust/dirt on them.
Every review and picture I've seen of this case has it fitting perfectly and snuggly like the Samsung original battery cover. However, mine is a little bit off. Seems the tolerance on the tabs are just a bit off and won't fit completely on my S3. Some of the corners won't 'snap' to latch and there's a noticeable gap along the edge. Doesn't feel like it will fall off but you can see it. I ordered through Amazon and will be returning this one to them. I did order the exact same case again from Amazon to see if the tolerance on that one is any better. If it fits well, I am definitely keeping it.
The case makes the phone feel more solid. There is no give/bending/etc on it at all when pressing along the back. Again the biggest complaint is the company logo. I've remedied this somewhat by darkening the logo with some flat black paint. I used a paint pen so it was pretty simple to do without it bleeding onto the rubberized part. You could probably do the same with a Sharpie to make the logo stand out less.
Would be really sweet to get my hands on 2 covers. Any tips on how to buy them or getting them transported to sweden?
Many thanks!
looks good
Hi folks,
Just received my Draco Design bumper. I will say it looks very nice in person and the side buttons and top button feel nice
1 problem though --
The back bumper is not tall enough... due to the curve of the HTC One, it has 0 lay on the table design, and 0 drop protection!
The curve of the phone is taller than the bumper causing the phone to touch any surface it lays on. In short...this case serves no purpose.
Buyer Beware
Wow... If it was for me i'd have sent it back and get my money. definately doesn't worth 70 bucks without a purpose
I have the HTC One Silver and installed the Draco One black bumper.
For better protection and peace of mind, I put an invisible shield kind of protection for the back and sides of the HTC One. Then I installed the Draco One Case.
I also use a pouch for final protection.
http://forum.xda-developers.com/showthread.php?p=41292226#post41292226
The idea of AL being used as a bumper instead of plastic/rubber also blows my mind. I would hope that you could return that case as it is extremely pricey for something that isn't doing it's job.
Actually I already knew that the Draco bumper won't protect much at the back because I had tested the dummy HTC One and noticed the back was curved, especially around the camera lens.
I agree the design could have been improved because the guys at Draco must have tested the bumper with a dummy model.
Anyway I will make do with the Draco Bumper until another better aluminum bumper releases.
The aluminum bumper gives a different look to the HTC One.
Yeah I'm definitely gonna be returning it. I noticed their website states only unopened items, but we shall see!
Hopefully they will adjust the back bumper to sit just a few mm higher and alleviate these issues.
I will contact the dealer in Hong Kong and see what they have to say. These bumpers are made in China anyway. May be they can get a quicker response.
May I ask whether the volume key is working properly
ysc0423 said:
May I ask whether the volume key is working properly
Click to expand...
Click to collapse
You need to make sure the volume buttons are set properly in the bumper. Initially I was having difficulty pressing the buttons but after setting the volume buttons properly, it became easier to press.
Sucks I was looking to get one. I'm waiting for dbrand to perfect their skins for the One, then I'm gonna get an aluminum bumper similar to this and have an Iron Man design on the back.
i have a feeling that this will be the case for most bumpers, because of the curve. however, wouldnt say that it offers 0 protection. ive been going commando with my One since i got it, today i dropped it on its corner and put a small dent in it. now, i could have avoided that if i had a bumper like this.
Judging by your second photo, at least it has a considerable 'lip' on the front side of the device which is great if you're like me and leave you One screen down on the desk.
GonzoDuke said:
Judging by your second photo, at least it has a considerable 'lip' on the front side of the device which is great if you're like me and leave you One screen down on the desk.
Click to expand...
Click to collapse
Yup, laying it down on its face is perfectly fine. I really do like the look of the thing in person, I'm just hoping they machine a Version 2 that extends the back side out a bit. Could also keep the case the same, but machine slight ridges on all 4 corners of the backside that extend just slightly more.
I'd use it if I didn't see the issues regarding the One's camera hole cracking/scratching and case denting as much as it does.
How long did it take to delivery the case to your location?
azalex86 said:
Hi folks,
Just received my Draco Design bumper. I will say it looks very nice in person and the side buttons and top button feel nice
1 problem though --
The back bumper is not tall enough... due to the curve of the HTC One, it has 0 lay on the table design, and 0 drop protection!
The curve of the phone is taller than the bumper causing the phone to touch any surface it lays on. In short...this case serves no purpose.
Buyer Beware
Click to expand...
Click to collapse
would you of rather make the case an inch thick and protect the phone? what did you think it was going to be with the curve of the one. i have some tape and packing over here it you want to secure your phone. If they made it cover the whole phone i imagine we would be reading a review of how tall it was
hugebulge said:
would you of rather make the case an inch thick and protect the phone? what did you think it was going to be with the curve of the one. i have some tape and packing over here it you want to secure your phone. If they made it cover the whole phone i imagine we would be reading a review of how tall it was
Click to expand...
Click to collapse
All they needed to add was literally a 2mm bump on each of the 4 corners. Wouldn't even be noticeable. Other bumper companies have done this sort of thing for quite a while now, I can't believe it was such a huge oversight by Draco.
On the case delivery, took about 4 days from order to receiving in AZ
I ordered one already and will apply a skin on the back to add more protection to it. It would be enough I think
azalex86 said:
All they needed to add was literally a 2mm bump on each of the 4 corners. Wouldn't even be noticeable. Other bumper companies have done this sort of thing for quite a while now, I can't believe it was such a huge oversight by Draco.
On the case delivery, took about 4 days from order to receiving in AZ
Click to expand...
Click to collapse
Did the case dent your phone?
AirSupply said:
Did the case dent your phone?
Click to expand...
Click to collapse
Nope, no dents -- only kept the case on for about an hour to test out signal strength/gps loss, etc. Would be a fantastic case if not for this little bit of "duhhh."
If you're going to use this case make sure to get a protector for the back like some have suggested. Also know that because of the low profile camera bumper lining on the HTC One, if dropped on it's back, you may get a broken lens in addition to the dent in the aluminum.
MCube74 said:
I have the HTC One Silver and installed the Draco One black bumper.
For better protection and peace of mind, I put an invisible shield kind of protection for the back and sides of the HTC One. Then I installed the Draco One Case.
I also use a pouch for final protection.
http://forum.xda-developers.com/showthread.php?p=41292226#post41292226
Click to expand...
Click to collapse
can you tell me does the case affects the signal?