I just picked up the black silicone gel skin from the local Sprint store. They have about 4 different cases in stock, aside from this one they have the body glove case, a leather case, and a weird 2-piece plastic snap case 2-pack. Here are my impressions:
1. The fitment is perfect and all cutouts line up perfectly
2. The camera lens is recessed about 1mm from the edge
3. The texture is smooth as opposed to the leathery texture of Sprint Hero silicone skin (and it's thinner than the Hero skin)
4. The edges around the screen recess the screen a little over 1mm so the entire face is protected from a fall onto a flat surface
5. The edges around the screen overlap the screen seams by about .5mm
6. Overall the phone still feels thin and sleek in my opinion
7. As with any silicone skin, it's tough to get in/out of tight pockets
Edit: Photos by review site here: http://goo.gl/F9px
Can you post some pics?
i picked up this skin tonight as well. i wish it was more grippy on the back as its so smooth it seems like it will be slippery. well, i have the skin but no evo until the evening tomorrow
knives of ice said:
i picked up this skin tonight as well. i wish it was more grippy on the back as its so smooth it seems like it will be slippery. well, i have the skin but no evo until the evening tomorrow
Click to expand...
Click to collapse
I was installing one on a customer's evo today and that was my main concern. Holding it I felt like I was going to drop it. It just felt too slippery. Personally I prefer our Body Glove case for the Evo. It had an over all better texture and I really like the appearance. Once I can finally take my evo home I will definitely be purchasing that case.
I don't think it's too slippery, but the case is too loose imho. It doesn't fit very snug on the phone. Hopefully with some sunlight/use it will shrink.
No pictures. Come on, this is the 21st century. Lets get some visuals.
knives of ice said:
i picked up this skin tonight as well. i wish it was more grippy on the back as its so smooth it seems like it will be slippery. well, i have the skin but no evo until the evening tomorrow
Click to expand...
Click to collapse
I have mine on now and you're right, the back is kind of smooth. I don't know what wizardry they used, but the edges are grippy as hell. I'm happy with that since I don't think I'll ever pick this phone up by only grabbing the back of case and the display on the phone.
Here are two pics of this case. I used my webcam, so I apologize for it looking a bit blue, the bad angle, and the graininess.
The Silicone case from Sprint is fantastic. Thought the 24 bucks one seemed kinda nice.
Fixter said:
The Silicone case from Sprint is fantastic. Thought the 24 bucks one seemed kinda nice.
Click to expand...
Click to collapse
I bought it too..but it was only 15 and change...at sprint? premier customer discount.
apristel said:
I bought it too..but it was only 15 and change...at sprint? premier customer discount.
Click to expand...
Click to collapse
You bought the 24.99 one for 15 bucks?
Fixter said:
You bought the 24.99 one for 15 bucks?
Click to expand...
Click to collapse
yes i sure did. came in a card board thing with a fake EVO (cardboard)...?
apristel said:
yes i sure did. came in a card board thing with a fake EVO (cardboard)...?
Click to expand...
Click to collapse
Wait I think we are misunderstanding here. The Black Silicone Case that the guy over there put the picture is 14.99. But there is another one with swirly pattern. That one is 24.99. Is that the one you got?
Fixter said:
Wait I think we are misunderstanding here. The Black Silicone Case that the guy over there put the picture is 14.99. But there is another one with swirly pattern. That one is 24.99. Is that the one you got?
Click to expand...
Click to collapse
lol i didnt get the swirly one...just the plain black one!
apristel said:
lol i didnt get the swirly one...just the plain black one!
Click to expand...
Click to collapse
Yea, thats what I thought. Though I never saw the Swirly One in the Sprint Store, but it is on the Sprint Online Store here is a link:
http://shop.sprint.com/NASApp/onlin...ryID=CZH5070R&topPageNumber=0&subPageNumber=0
aldo37 said:
I don't think it's too slippery, but the case is too loose imho. It doesn't fit very snug on the phone. Hopefully with some sunlight/use it will shrink.
Click to expand...
Click to collapse
My experience w/silicon cases in the past (Belkin ones on an iPod touch) has been the opposite, they either stay exactly the same or they loosen up and get floppier... Those that are multi-color tend to lose some of the dye over time too, around the edges. They do look cooler when they're new tho...
I think I'll get the black one from Sprint and I'll probably order that Amzer Argyle case when it's finally shipping... It's a different kinda rubber, seems stiffer than the silicon stuff but still flexible enough that you just slip the phone into it by stretching it (unlike any of the plastic cases), seems smoother too so it might be popular w/those that dislike the effect of the silicon skins on pockets. From what I've read on the reviews for the same type of case made for other phone models, it's actually a bit translucent and the argyle pattern doesn't stand out as much as it does in the photo. There's a Blackberry Amazon review that describes the material it's made of pretty well.
That Body Glove case might be grippy or rubbery on the back but it's still a plastic frame 2-piece case btw, there's one or two other threads on it. Probably slightly bulkier than the silicon ones.
I got the black one and the raspberry (hot pink) one for my wife. I did notice the case kind of put a small shadow on the front camera picture. I nipped off about 1/8" from it and it works fine now. Hope it doesn't cause it to come out easier now.
I found it interesting that it was HTC branded on the back.
Drewmungus said:
I found it interesting that it was HTC branded on the back.
Click to expand...
Click to collapse
hmm never noticed that until now
now i feel better about the case somehow
Skin protection
Thanks for the info
Related
I ordered this case for my wife:
http://cgi.ebay.com/SILVER-BLACK-FL...461939?pt=PDA_Accessories&hash=item4156763633
It came in and it fits perfectly, its slightly rubberized feeling so its grippy and its slim. I tested it and it works in a pocket without sticking to the pocket liner.
The nicest thing I like is that the graphics are several layers deep, giving it an interesting depth to it. Ill try to take some pics with my Tbolt of her Tbolt in the case.
Not bad for 6 bucks. The only drawback I noticed but she does not care about is that some of the graphics of the front and back piece do not line up perfectly on the seam.
I also ordered her another similar case but more flowery. Ill post when that comes in.
I bought a solid black one from the same seller. It is a nice case for the price. Looks good and appears to be good quality. Only time will tell if it begins to peel.
Here's a few pictures of the case.
im so torn over whether to use a case on this or not. if it had gorilla glass i wouldnt care.
Being a 2 piece case, how well does it hold together from a fall? If it landed on its edge is it going to pop open?
Hard to tell. I don't want to drop it and test it for obvious reasons.
But it does snap together pretty well and its not terribly easy to open it back up and take it off.
Here are a few pictures of the second case I ordered for her from Amazon. This one looks even better than the other. And it snaps the same, front/back, but it feels a little less sturdy. It does not snap as strongly as the other.
possible to get a pic of the two pieces separately?
how is the power button? easy to push?
Which "finish'' are these cases? I see there are a different ones listed.
bad4u6669 said:
possible to get a pic of the two pieces separately?
how is the power button? easy to push?
Which "finish'' are these cases? I see there are a different ones listed.
Click to expand...
Click to collapse
Here are two pics of the two pieces of the case.
Power button opening is quite large so my entire thumb pad fits well and the button is not obstructed at all.
I have no idea on name for finish, they are rubberized plastic. So they are grippy on the outside and won't slip. But they are smooth plastic on the inside. Also, its not grippy to where it clings to pocket liners, its fine in my jeans and in my khakis and suit for work.
I just need to find one I like for myself now. Maybe something like this:
http://www.amazon.com/HTC-ThunderBolt-Incredible-Rubberized-Shield/dp/B004LSYEC2/ref=pd_rhf_shvl_32
or this:
http://cgi.ebay.com/ABSTRACT-ART-RF-CASE-HTC-THUNDERBOLT-4G-CHARGER-/230598620069
Also, some people praise TPU cases, what s TPU? Plastic or the jelly kind?
man that case on ebay is vibrant! I went for the hard/rubberized case from the same seller. figure if i dont like it or it beaks after a few months im only out 6$
as long as it can stand falling off my lap when i stand up im good.
bad4u6669 said:
man that case on ebay is vibrant! I went for the hard/rubberized case from the same seller. figure if i dont like it or it beaks after a few months im only out 6$
as long as it can stand falling off my lap when i stand up im good.
Click to expand...
Click to collapse
Very nice case indeed
TPU (or Thermoplastic polyurethane) is like silicone, except much sturdier and glossier. http://en.wikipedia.org/wiki/Thermoplastic_polyurethane
I got the shell/holster combo from VZW and I love it. It is slim and grippy.
Ordered my case yesterday. Got it today. That person don't mess around. Damn good case for the price too. I got the rubberized black one. Had to graba Sharpe and mark the inside edges black, cause they were showing white when clipped together.
This thing will stay together for a few falls. Can't beat it for this price.
Sent via bits and bytes
Cool. Can you take some pictures? I went ahead and got the dark red/burgundy one. Ill get the arty/colorful one when it drops in price a tad.
1st complaint
I removed the case for the first time today. I used a penny in the access slot on te side and it chipped away some of the black. I had to use a sharpie to fill it in so it wouldnt be so obvious.
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
ttran97 said:
I have one as well. Love it. Too bad the car dock doesn't work with the case on. I hate having to take it off, but at least it's pretty easy.
Click to expand...
Click to collapse
Agree with you on all fronts, including car dock and easiness of taking the case off.
Sent from my ADR6400L using XDA App
Link?
10char
want a droid said:
Link?
10char
Click to expand...
Click to collapse
Was easy enough to find:
S-Line Ebay Case
For what it's worth, I got the black one, but I've heard better comments on the smoke one when I was doing my research.
Sent from my ADR6400L using XDA App
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
pretty cool looking, does it hold up?
is the inside rubber/silicon?
viceversa said:
is the material that soft gel/rubber type? they look "sticky" lol how does it feel in the hand?
Click to expand...
Click to collapse
There seems to be 2 types of materials, 3 finishes.
On mine, the clearish part is a slightly-bendable hard plastic with the texture of what all of my matte hard plastic. Think the type of plastic that is one most power adapters (that aren't shiny) but add a slightly bendable aspect to it.
The black part on the back is shiny, slick, smooth, and more flexible. It's similar to silicon cases (what I can assume you mean by soft gel/rubber) but I think it's still different. It seems to be less "floppy" even though it is very bendable. The shiny black part seems to "stick" to certain surfaces (such as my desk and other hard/flat surfaces) but not to some that you would expect (it doesn't stick to my pockets at all and glides just fine across my clothing, car seat, and non-leather furniture - it might stick to leather, I don't know). The black part on the front appears to be the same material as the black part on the back, but with a matte finish. The result of the different finish is that it doesn't have the "stickiness" on much of any surface, yet still gives your hand a slight bit of grip beyond what the stock TBolt gives you.
Overall, the "feel in hand" is comfortable and it gives you extra grip but doesn't feel sticky or anything like that. Imagine going from a slick, hard-plastic phone to a phone with a rubberized body (like our TBolt has). Going from a naked TBolt to this case is kinda like taking that one step further. But in no way could I ever describe it as "feeling sticky" in my hand or pocket.
jblist90 said:
pretty cool looking, does it hold up?
Click to expand...
Click to collapse
So it looks like/feels like it's not going to just fall apart or anything like that, if that's what you mean. I can't envision drops/dings or other daily use wearing it down.
The ONE concern that I have about it holding up is because it is made with two types of "plastic" (I don't know if it's plastic, silicon, rubber, or whatever, hence my quotes). I fear that if I take the case off and on a lot (for my car dock), that the joints of the two plastics might start to come apart. This is NOT based on any quality issues that I have seen so far, just a concern based on the fact that this wasn't produced in a single mold when it was melted down (this is coming from somebody with an engineering background).
I will be shocked, though, if I have a problem with this case in the next 6 months, and for $5, well, I'd say that's pretty damned good!
boristhebladexx said:
is the inside rubber/silicon?
Click to expand...
Click to collapse
Read my post a couple posts up about the 2 different types of materials with 3 finishes. As best as I can tell, the inside is the same material as the outside. What this means is that 60% of it is the very flexible plastic while the clear part does cover ~40% of the back. I would expect the black part to offer more protection to a fall/bump than the clear part, and fortunately the black part covers most of the corners and edges. Still, I expect the clear part to offer more protection than a hard plastic case would.
Updated the OP with some photos. Perhaps they will help.
thanks for the detailed feedback!
This case will also fit into the Verizon holster/shell combo holster. You just can't use the VZW shell, but it'll slide into the holster. The fit is a little snug, but it works. I like to swap out this case with the VZW shell. This one provies more protection, but the VZW one is pretty cool too.
In case anybody was wondering, I got mine from this seller from China: http://goo.gl/62Fhx
It took something like 10 days to get to me, but I didn't mind since it cost less than a good burger.
Jaxidian said:
I just got my S-line case (black) from eBay and I love it. It adds very little bulk, seems like it will do a good job protecting my phone, and looks very nice.
Definitely worth the $5!
Edit: Pics added
Click to expand...
Click to collapse
Hey, thanks for the write up. I'm in Arizona and ordered one for $5 from a California seller. I should have it early next week.
Thanks again
Sent from my BAMF ADR6400L using XDA Premium App
I ordered mine just before the thread was started and its my favorite case for my Thunderbolt. It looks so cool too!
sent from my BAMF Thunderbolt!
Well Done
$5 ARE YOU KIDDING ME? grrr I have the silicone case that I got from VZW for $15 and it's not even all that..
But I think all cases will add some bulk for for that price you cant go wrong. Great buy.
Might have to check this one out
Just a heads up, with this casr the phone fits like a champ in the holster of the shell/holster combo i got from VZW
sent from my BAMF Thunderbolt!
for example:
http://cgi.ebay.com/SAMSUNG-i9100-GALAXY-S-2-S2-SILICONE-CASE-BLACK-/330577389222?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item4cf7f2a6a6#ht_1357wt_1198
http://cgi.ebay.com/Black-Case-3x-Screen-Protector-Samsung-Galaxy-I9100-/380345350505?pt=PDA_Accessories&hash=item588e597969#ht_2109wt_1139
I've ordered the 2nd and didn't get it yet but I'm afraid it will be crappy
I ordered one similar and tbh took it off after a day it made the phone look so ugly i have found some more exp ones for £15 which look good but tbh im sticking with my screen protector and thats it .
Yes, first one.
Fits perfect, its durable.
I always make sure i get the gel case not the silicone ones as they really attract the dirt/dust , and some say they have a special coating , "YEAH RIGHT"
Tinderbox (UK) said:
I always make sure i get the gel case not the silicone ones as they really attract the dirt/dust , and some say they have a special coating , "YEAH RIGHT"
Click to expand...
Click to collapse
yes..and for that price the s tpu case is miles better than those cases..
Hi, I bought blue TPU case.Fit ok,looks ok too,but there is problem with calling and sound quality.People told me,that they can hear them self ( echo ).Without case no problem.Strange don't you think?
Sent from my GT-I9100 using XDA App
I gave up, ordered Rearth case and screen protectors
Should have got one of these.
http://cgi.ebay.co.uk/SAMSUNG-GALAX...sesPouches&hash=item45fad7bb06#ht_1492wt_1139
The textured sides give very nice grip. The description says silicon/gel, but I'm told by someone on this forum it's actually TPU. I can tell you it's nice and firm and feels very protective. Bought mine from a shop called chitterchatter for £5, where I also got my phone from too. Case is even cheaper on ebay. Here's pics I took of mine. Screen protector needs redoing, too many bubbles, lol.
http://img834.imageshack.us/img834/5664/back1s.jpg
http://img220.imageshack.us/img220/6950/back2dq.jpg
http://img17.imageshack.us/img17/5218/back3gf.jpg
http://img109.imageshack.us/img109/1290/back4p.jpg
http://img215.imageshack.us/img215/1021/front1kb.jpg
http://img534.imageshack.us/img534/4796/front2hg.jpg
http://img64.imageshack.us/img64/9713/front4j.jpg
http://img560.imageshack.us/img560/797/front5.jpg
http://img51.imageshack.us/img51/2475/front6o.jpg
I originally bought one of those silicone ones in the first post, it was quite loose on my phone and the surface kind of stuck to my jeans pocket making it annoying to take out, so I then bought one of the gel/tpu cases that looks identical to the one in the post above, which does a sterling job.
Roman5 said:
Should have got one of these.
http://cgi.ebay.co.uk/SAMSUNG-GALAX...sesPouches&hash=item45fad7bb06#ht_1492wt_1139
The textured sides give very nice grip. The description says silicon/gel, but I'm told by someone on this forum it's actually TPU. I can tell you it's nice and firm and feels very protective. Bought mine from a shop called chitterchatter for £5, where I also got my phone from too. Case is even cheaper on ebay. Here's pics I took of mine. Screen protector needs redoing, too many bubbles, lol.
Click to expand...
Click to collapse
+1
I bought this from ebay for £2.90 and am very pleased with it, collects a bit of dust at the bottom but a lift and gentle blow gets rid of that. Feels grippy and adds a nice bit of bulk to the phone aswell.
About six weeks ago, I bought 4 TPU cases very similar to those mentioned in the OP, for US $8.00. Fortuitously, they arrived on the same day I took delivery on the SGS2. They fit pretty well, although the long sides are a little loose, but not enough to be a danger of slipping off. On my case, the power & volume switches are covered by the case, which has button skins stamped into it. The back is textured with a diamond pattern, and the sides look slick but do have some grip.
Like most cases, it has the top right corner cut out to accommodate the antenna on the Korean version of the SGS2. The first few days I had the case, I noticed it attracted quite a bit of dust, but that appears to have subsided in the last few weeks. Overall, it's much better than I'd have expected a $2 case to be; I'd bought 4 figuring they'd be so crappy that only one of them would fit well, or they'd fail in short order and I'd have to upgrade to a CaseMate, PDAir, or Krusell.
taoranga said:
for example:
http://cgi.ebay.com/SAMSUNG-i9100-GALAXY-S-2-S2-SILICONE-CASE-BLACK-/330577389222?pt=UK_MobilePhones_MobilePhonesCasesPouches&hash=item4cf7f2a6a6#ht_1357wt_1198
http://cgi.ebay.com/Black-Case-3x-Screen-Protector-Samsung-Galaxy-I9100-/380345350505?pt=PDA_Accessories&hash=item588e597969#ht_2109wt_1139
I've ordered the 2nd and didn't get it yet but I'm afraid it will be crappy
Click to expand...
Click to collapse
I picked up one like that from Amazon. I sent it back today. It did not fit well and I hated that it would not slide in and out of my pocket easily. It also attracted lint from my pocket.
I prefer a hard case.
I have my eyes on a SGP Silke case.
http://cgi.ebay.co.uk/SAMSUNG-GALAX...UK_Mobiles_Accessories_RL&hash=item3366acadbc
Just ordered the above case, initially had the same type from the same seller for my Atrix and it was a really good case.... Lets hope this is just as good
Yea, i bought 2. But you need them TPU one's and not those gel covers. Mine fits pretty wel and worth the 2 bucks.
I bought one S line TPU case, but I find it prety hard to press the buttons. overall it's a really nice case fits perfectly (hard to take off )
i decided to buy this aluminium one :
http://cgi.ebay.co.uk/SAMSUNG-GALAX..._MobilePhonesCasesPouches&hash=item1c1c8cc497
It is really nice! although the silicone part attracts some dust, but not much, the mic holes are not perf cut, but no problems during calls etc.
So originally I was going to hold off for an otterbox or something similar for this phone otterbox was taking too long and the casemate case felt not really flimsy but not sturdy enough for 40 bucks, so after all the good reviews I ordered this case. Let me tell you, its well worth it, very sturdy, very well cut, very good feeling case and the best part is it just 10 bucks. Only suggestion would be not to get the high gloss black since my fingers smudge on the back slightly but still a GREAT case. A+
kingsplayer2 said:
So originally I was going to hold off for an otterbox or something similar for this phone otterbox was taking too long and the casemate case felt not really flimsy but not sturdy enough for 40 bucks, so after all the good reviews I ordered this case. Let me tell you, its well worth it, very sturdy, very well cut, very good feeling case and the best part is it just 10 bucks. Only suggestion would be not to get the high gloss black since my fingers smudge on the back slightly but still a GREAT case. A+
Click to expand...
Click to collapse
I have had it since day one and love it.
If you think the fingers smudges are bad on the TPU, you should see the Case Mate Black Barely There Aluminum Case. The TPU is nothing compared to how bad the finger smudges are on that one.
The smudges aren't too terrible, nothing to ***** about.
kingsplayer2 said:
The smudges aren't too terrible, nothing to ***** about.
Click to expand...
Click to collapse
Agreed. I like the Matte finish better.
this is the one i have been using and love it...hard trying to find something better and justifying the cost when the quality of the TPU high gloss black is so good.
KaliS-Pugilist said:
this is the one i have been using and love it...hard trying to find something better and justifying the cost when the quality of the TPU high gloss black is so good.
Click to expand...
Click to collapse
yup, qft. my only regret was waiting for a better case when there was no need all along, the tpu one is bangin.
I've got a couple questions.
I currently have the carbon filter case w/kickstand.there is absolutely no
protection on the top and bottom.does this case offer what the carbon case lacks?
also, my evo had a case that had like a felt lining inside and it was a 2 piece that snapped
together.does this have any kind of lining in it.carbon fiber doesn't have a lining in it, just hard shiny plastic.thanks for review.I'm leaning towards the matte black.anybody know if sprint or best buy carry this in store?
is this the case you are talking about?
http://www.ebay.com/itm/BLACK-GEL-T...ccessories&hash=item43aa3ab3e2#ht_1268wt_1209
I have the same case. Had a similar one on my Nexus S. I like it cause it retains the original feel of the phone.
sent from my Epic 4g Touch
keekah said:
is this the case you are talking about?
http://www.ebay.com/itm/BLACK-GEL-T...ccessories&hash=item43aa3ab3e2#ht_1268wt_1209
Click to expand...
Click to collapse
http://tpu-cases.com/index.php?main_page=product_info&cPath=42_36&products_id=146
I have the matte one and love it. Customer service is amazing as well! I can't recommend these guys enough.
So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
ZenithHammerhead said:
So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
Click to expand...
Click to collapse
I would wait until hard cases start coming out and just buy one.
migueldias94 said:
I would wait until hard cases start coming out and just buy one.
Click to expand...
Click to collapse
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
ZenithHammerhead said:
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
Click to expand...
Click to collapse
Well, the OnePlus is essentially the same device and its getting backplate alternatives, so we could see that coming to the Find 7 in the near future, but i don't know. Or maybe some third-party company starts to make them, like dBrand for example.
Do an Easy Cover Hack
ZenithHammerhead said:
So I've had the OF-7 for a few days now, and so far, my only complaint with the larger than normal ("Normal" being a Nexus 5 for me) screen size for me is the texture of the backplate. Its too smooth, and with the weight, it feels unsafe. I pre-ordered, so they sent me the flip cover which actually feels a lot better in the hand..
Unfortunately I take a lot of videos, so when the flip cover is open and I'm taking video, it gets in the way of the video. Does anyone know where I can buy another backplate that has a better texture to it than the stock smooth one? Thank in advance!
Click to expand...
Click to collapse
I thought the same about the stock backplate. I loved the feel of the Easy Cover but I don't like flip covers. So I cut the flip part of the cover off. Just cut the flip part along the crease where it naturally folds over. Then, using a nice sharp pair of scissors, Trim the remaining faux leather so it is flush with the plastic edge underneath. The side with the volume rocker has the plastic underneath the faux leather extending past the side of the phone. Just use some sand paper to make it flush with the part that is indented to accommodate the volume rocker. I found that the plastic overhang was reducing faster than the faux leather. Just sand some of the plastic then use the scissors to cut it flush again and continue until the plastic overhang is gone and flush with the sides of the phone. Then you might want to rough up the plastic edge on the power button side. This makes both sides uniform and gives better grip. When everything looks nice and flush use a lighter to melt any frayed faux leather. It probably took me 30 mins because I was a little obsessed with making it look nice. The end result is that it's flush with the left and right sides. It doesn't look hacked together at all. The only asymmetry is that the side that had the flip doesn't have stitching. I've attached pictures. Hopefully it works since I have less than 10 posts.
Wow, that's really well done Doc!
Might have myself a little weekend project here.
I'm really waiting for a thin case like Spigen or Incipio make for the Galaxy series. Nice matte feel for better grip and very thin.
the tchichs
Thnaks, I'm happy with the results. Almost everyone who I've shown my new telephonic smart device to has commented on how good the backplate feels. Give it a try. I'm not super craftsy or anything so anybody should be able to do it. The most tedious part was sanding down the lip on the volume rocker side. I used coarse grit sandpaper but if you had a rotary tool it would go much faster.
-Sent from my rooted, bootloader unlocked, overclocked Blendtec blender running Android 5.0 Lollipop
Finf 7 quad HD backlpate
ZenithHammerhead said:
Hard cases are all over on Ebay already...and nah I wanted a backplate replacement to keep the phone from getting to thick..
Click to expand...
Click to collapse
The Find 7 Premium has the carbon fiber back-plate. That is suppose to feel more secure. Maybe you can get it already somehow from China.
I have been able to shoot video with the flipcover, ARe you sure you can't acclimate to it? It's also not a bad idea in the protection department.
If you tilt your phone to the right instead of the left and hold the cover closed from the bottom it's not too awkward (for me anyway).
The white back actually has a really nice texture and is not as slippery as the black one. I actually want to see about ordering a replacement but in black. I think it would look cool, black front, white middle molding and black back I hope they start to sell just the backs. I emailed Oppstyle about it. Hopefully they will sell me a black one
I have the white back and still thought it was a little too slippery. I bought a black Nillkin case and Nillkin glass screen protector. The case is a nice textured softouch plastic. It fits great does not add much girth and no more slipperiness. Looks great with white peaking through the speaker and camera cutouts.
http://www.ebay.com/itm/Nillkin-Mat...Cell_Phone_PDA_Cases&var=&hash=item4d1b84f4c2
The glass protector went on easy but I had a bubble that I could not get out. After 2 days the bubble went away with occasional rubbing. Glass feels great but shows fingerprint oil more than stock. I don't like the ear piece/sensor cut out, I would have preferred a separate cut out for each. Seems kind of stupid putting glass on to protect gorilla glass butt people always loved the glass protectors so I thought I would try it. Since the case and protector came to $19 together, what the heck, give it a try. Shipping from China to SoCal was about 10days..
http://www.ebay.com/itm/231192733607?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I have this exact setup. Can confirm the glass is very nice and the case is much better than the eBay ones.
Sent from my X9006 using XDA Free mobile app
gedster314 said:
I have the white back and still thought it was a little too slippery. I bought a black Nillkin case and Nillkin glass screen protector. The case is a nice textured softouch plastic. It fits great does not add much girth and no more slipperiness. Looks great with white peaking through the speaker and camera cutouts.
http://www.ebay.com/itm/Nillkin-Mat...Cell_Phone_PDA_Cases&var=&hash=item4d1b84f4c2
The glass protector went on easy but I had a bubble that I could not get out. After 2 days the bubble went away with occasional rubbing. Glass feels great but shows fingerprint oil more than stock. I don't like the ear piece/sensor cut out, I would have preferred a separate cut out for each. Seems kind of stupid putting glass on to protect gorilla glass butt people always loved the glass protectors so I thought I would try it. Since the case and protector came to $19 together, what the heck, give it a try. Shipping from China to SoCal was about 10days..
http://www.ebay.com/itm/231192733607?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
The Niklin glass SP doesn't has cut out for front camera.Would that have any impact for front camera usage?Intend to get one for myself.....
aw1007 said:
The Niklin glass SP doesn't has cut out for front camera.Would that have any impact for front camera usage?Intend to get one for myself.....
Click to expand...
Click to collapse
Most people have reported that it has very little to no effect. I've barely used the front camera but I just looked at it and it looked fine to me.
Have anyone found a Place to order replacement back covers, I bought a midnight but would like to try the white and carbonfiber backcover to. Don't have the phone right now as I had to send it back to Oppostyle to get it replaced, but they still don't have any stock. Asked them about getting carbonfiber or white back covers, they checked with Oppo and they answered that they had no plans to sell back covers seperately.
fremar said:
Have anyone found a Place to order replacement back covers, I bought a midnight but would like to try the white and carbonfiber backcover to. Don't have the phone right now as I had to send it back to Oppostyle to get it replaced, but they still don't have any stock. Asked them about getting carbonfiber or white back covers, they checked with Oppo and they answered that they had no plans to sell back covers seperately.
Click to expand...
Click to collapse
Kedros is doing a mass / bulk order of fake-carbon / third-party back covers over at the official oppo forums right now.
If you want to snatch a carbon look-a-like cover, or simply midnight / white spares, thats the place you got to go.
Kedros charges 4.80€ per cover + 1€ shipping (china international) + 5% paypal fees.
Don't think you will find it any cheaper elsewhere.
MrColdbird said:
Kedros is doing a mass / bulk order of fake-carbon / third-party back covers over at the official oppo forums right now.
If you want to snatch a carbon look-a-like cover, or simply midnight / white spares, thats the place you got to go.
Kedros charges 4.80€ per cover + 1€ shipping (china international) + 5% paypal fees.
Don't think you will find it any cheaper elsewhere.
Click to expand...
Click to collapse
Ok, that sounds interesting, but I can't register on the oppoforums for some reason.
fremar said:
Ok, that sounds interesting, but I can't register on the oppoforums for some reason.
Click to expand...
Click to collapse
Yeah for some reason I can't register through the web.
Use tapatalk and search for oppo, there you can register for an account
Same problem from tapatalk, it just opens the browser to register for me.
fremar said:
Same problem from tapatalk, it just opens the browser to register for me.
Click to expand...
Click to collapse
I downloaded the app, and that's how I got an account in.
I would love one with a sandstone texture like the OnePlus One.