Hi!
I have some problem with the pda.
I have hspl on it. 1.93 Olinex, and a clear winmo 6.1 with no tf3d.
I just wanted to install this rom:
Gen.Y D2 R5.5[WM6.1 21056][UC][SENSE2.1][
http://forum.xda-developers.com/showthread.php?t=521941
In this thread they say this is the recommended radio rom for this rom:
"GSM Diamond Radio 1.13.25.24•RapidShare
•MegaUpload
•MediaFire
* This is an original Diamond Radio, no security unlock needed!"
ok. So I sarted the radio rom install with costumRUU. And when it gets to 100% the costumRUU stoped with rom flash error.
then later i find this thread:
http://forum.xda-developers.com/showthread.php?t=470306
this thrad says:
"Your phone has to be SECURITY UNLOCKED (WHICH IS NOT THE SAME AS SIM-UNLOCKED!!!)
Radio v1.13.25.24 (Blackstone) (SU) (Quad Band)(NEW) "
So. My pda wont start. when i start it, it goes to the booatloader screen and there is "rom flash error" text. And i cant reach the internal storage.
i ve tryed to install the stock rom but the instal stops at 13% with rom flash error 226.
i dont know what to do... can somebody help me?
Is the official rom same as the one you are able to download via the HTC official site using the serial number under the battery of your device...
Hi!
A few weeks ago the problem was the same. You tryed to help me, remember?
only the stock htc service could made it.
you gave me the link to my stock rom anno.
I cant flash the stock rom. Are there any rom with radio? Or just the stock rom has radio?
Related
I am unable to upgrade radio ROM on my O2 XDA Exec (SIM-free).
When trying to upgrade radio rom from either the bootloader or OS itself, the upgrade process stops at 0% and after 2-3 minutes I get the “error 114: Radio rom update error”. Tried advices found in http://forum.xda-developers.com/showthread.php?t=296901 and http://forum.xda-developers.com/showthread.php?t=296393&page=2, but to no avail.
I'd like to point out that my problem is slightly different because I have not able to upgrade radio ROM at all and the rom the device came with is still working.
Currently the device has Jwrightmcps's Crossbow ROM 2.02.00 (installed without the radio part and v1.01 bootloader. Radio ROM version 1.04.02.
Any help would be highly appreciated.
ubigene
Hello All,
I think I lost my HTC Trinity P3600 device :-( I was trying to update INDIGO_LITE & upgrade failed during half way and I rebooted the device & now it only boot to white screen. If I try to reload another rom it's keep saying rom is corrupted.
Any help will be really appricated
Thanks,
Ankito
k a few questions for you..
1) did you have hard-spl installed?
2) can you enter bootloader manually?
3) have you tried to flash an official ROM from you manufacturer? (WM5 or something)
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
ankitoberoi said:
1. I just tried to install hard-spl but it goes 100% and then get an error "image is corrupted"
2. Yes I can enter into bootloader manually & it's showing following
Trin100
IPL 0.50
Trin100
SPL-3.03.0000
3.have you tried to flash an official ROM from you manufacturer? (WM5 or something)
I don't have official ROM from my manufacturer. It's Trinity P3600 device. Any idea where I can find offical WM5.0 rom.
Thanks,
Ankit
Click to expand...
Click to collapse
Hello,
http://www.smartmobility.nl/_BIN/TRI_DT_WWE_1234052_103_6275_1380011_108_Ship.zip
Bye
so it's an HTC product? look at the wiki, or logon to HTC's website to download the latest ROM for your device and region (europe, asia, etc).
What i meant was did you have hard-spl installed before you flashed, but i'm guessing not since you have the new bootloader. You really need to read up and protect your device before you flash.
Try to find an official ROM and see if that works first..
Thx jotam
Phone start working again. Do you guys recommand any 6.0 rom which I should use? Should I wait for HTC to come up with offical rom?
Thanks,
Ankit Oberoi
htc has official rom already.. just try and see what you like, but pdaviet and indigo are good for me.
make sure you have hard spl installed before you flash again. You can follow the guides here if in doubt.
Hello,
i have a big problem.
After the installation of some Roms i have to do a hard reset becaue my Diamond chrashes.
So now I installed another Rom and the "Preparing your device for first use" screen appears but after this, nothing appens.
So i don't have any idea what i can do to fix this Problem...
Did anyone of you can help me please?
A little more inforation from you.
Might help to mention which rom you are having the issue with, which Radio version etc.
Radio ist 1.09.25.23 and the Rom ist Udks new Topaz R2.
I have the same experience with udK Syrius Topaz R0. The device keeps hardresetting even after I have installed another rom. Eventually, I restored to stock rom and install another cooked rom again. The problem seems to have been solved.
There are other users having the same problem with this rom. Although some have reported no problem, I would keep watching before installing this rom again.
ichselbst said:
Hello,
i have a big problem.
After the installation of some Roms i have to do a hard reset becaue my Diamond chrashes.
So now I installed another Rom and the "Preparing your device for first use" screen appears but after this, nothing appens.
So i don't have any idea what i can do to fix this Problem...
Did anyone of you can help me please?
Click to expand...
Click to collapse
How long are you waiting on this screen. It does take a few minutes for it to finish what it's doing.
Oh i wait about half an hour...
Now I changed the Rom and flashes Aztor and all is working.
Is it possible that the version of HardSPL is the reason for the hang up with udk's Rom?
At the moment i use hard-SPL 1.4, but I don't know how i can install the 1.93 Version.
When I download the zip.package from this tread http://forum.xda-developers.com/showthread.php?t=400950 the package contains only the RUU_Signed.nbh file and I have no idea how to install this file?!
ichselbst said:
Oh i wait about half an hour...
Now I changed the Rom and flashes Aztor and all is working.
Is it possible that the version of HardSPL is the reason for the hang up with udk's Rom?
At the moment i use hard-SPL 1.4, but I don't know how i can install the 1.93 Version.
When I download the zip.package from this tread http://forum.xda-developers.com/showthread.php?t=400950 the package contains only the RUU_Signed.nbh file and I have no idea how to install this file?!
Click to expand...
Click to collapse
You need the custom RUU to flash the spl to your phone
Im sorry, it is maybe a bad question, but where can I find the Costum RUU?
Thanks for your help!
Prewien said:
You need the custom RUU to flash the spl to your phone
Click to expand...
Click to collapse
Custom RUU does not seem to work with olipro's SPL 1.93. Try this one HERE which I know works.
ichselbst all you need to do is unpack this and run the ROM Update utility (RUU) follow insructions and wait till screen staes finished.
Hope that helps
So i decided to flash my ROM on the weekend, and the upgraded failed. Now the phone is stuck in bootloader.
Now i have two years ago after getting my trinity i had SPLed the phone and i have never had any issues upgrading my rom. (I think the SPL is fried)
I have tried to use Mitty to fix the bad SPL but it won't connect. It can't find the USB port?
I have also tried flashing from my mini SD card but it simply say's loading and then goes back to bootloader screan?
Can anyone help me here?
Download the WM6 ROM flash from the HTC web site and flash your phone with that. It is available for download under support on the HTC Australia website.
What version of windows are you trying to flash from?
Also, what rom are you trying to flash?
It's fixed again. The ANZ rom did the trick!
What ROM have you used?
can you post the link, please
Hello Everyone!
I got a diamond recently, and it stops at the Touch diamond screen, no OS and radio info. it hasn't got hardspl, it says on the bootloader: SPL-1.93.0000
I can't flash ROMs or hardSPLs because I can only go into the bootloader. is there anything I can do? Is there any way to flash unsigned HardSPL when I'm on the bootloader screen?
thanks in advance
L.
----UPDATE!---
I solved it!
Anyway I wrote down to help anybody who fell in this trap too:
So first, this is good if you flashed back your stock HardSPL and the device won't boot!
First: I hunted for my stock firmware because htc.com europe section said I cannot download with my S/N. I've figured out that my phone is from one of the ASIAN country, so I started to try my serial in all asian contry specific pages on htc.com. I've found this is the stock ROM for my phone:
http://www.htc.com/hk-tc/SupportDownload.aspx?p_id=133&cat=2&dl_id=489
this ROM is especially for the hungarians who bought the diamond in speedshop, with 1.37.405.1 WWE shipped rom!!!!
just go to bootloader, flash this rom, and VOILÁ you've got a recently shipped diamond now you can start again with flashing the hacked HardSPLs around here, and flash cooked roms etc...
L.