I am having problem in installing the Android in the HTC TP2 6.5, Gen Y boot is working but android is not installing, i am keep getting the error, So can anyone please give me the right android file to install.
thanks
Denny
DENNYPAT said:
, i am keep getting the error,
Click to expand...
Click to collapse
can pls tell us witch error u got? my marble doesn't work today...
DENNYPAT said:
I am having problem in installing the Android in the HTC TP2 6.5, Gen Y boot is working but android is not installing, i am keep getting the error, So can anyone please give me the right android file to install.
Click to expand...
Click to collapse
Download this, extract to the root of your SD. Grab the correct startup.txt. Click haret.exe. Enjoy.
FYI - we can't help with Gen.Y, so if you're having issues with it post in a thread for Gen.Y. XDAndroid has nothing to do with Gen.Y.
arrrghhh said:
Download this, extract to the root of your SD. Grab the correct startup.txt. Click haret.exe. Enjoy.
FYI - we can't help with Gen.Y, so if you're having issues with it post in a thread for Gen.Y. XDAndroid has nothing to do with Gen.Y.
Click to expand...
Click to collapse
I want to crash my tilt2 against the wall ,but before that I would like try android in it , dou know if android work with wifi in tilt2 ? I been told there is no wifi using android in tilt2 , thanks
jsaid said:
I want to crash my tilt2 against the wall ,but before that I would like try android in it , dou know if android work with wifi in tilt2 ? I been told there is no wifi using android in tilt2 , thanks
Click to expand...
Click to collapse
Uh... who told you that? There's certain devices that have a wifi init issue, but it's not all of them.
Wifi has been working for a very long time... For all phones AFAIK, other than a few that had that init issue.
Typing from XDAndroid Tilt 2 and I can safely confirm that WIFI does work. Everything pretty much works including CAMERA and backlight.
Sent from my MSM using Tapatalk
I've followed these instructions, however when I run HaRet.exe and attempt to boot linux the phone freezes. Does anyone have an idea of what I can do to fix this?
How to recalibrate the touch screen
andrewwd said:
I've followed these instructions, however when I run HaRet.exe and attempt to boot linux the phone freezes. Does anyone have an idea of what I can do to fix this?
Click to expand...
Click to collapse
fixed the problem, i was still overclocking in windows. Now i am having trouble with the touch screen calibration, could anyone help with that?
andrewwd said:
fixed the problem, i was still overclocking in windows. Now i am having trouble with the touch screen calibration, could anyone help with that?
Click to expand...
Click to collapse
Delete the ts-calibration file and boot again. Should force you to calibrate on first boot.
I heard some of the newer kernels cause issues with calibration - you should only have to ever calibrate once (assuming it's a good calibration) - just backup the file once you get a good one, and reuse it over and over.
So if you can't get it to calibrate, revert to an older kernel, get a good calib file, and save/reuse it.
It runs so slowly and freezes all the time.
What's wrong?
laurisan said:
And old OS stays and if ia restart my phone I can choos which system to choose?
Click to expand...
Click to collapse
WinMo stays. When you soft reset (from the pin or pulling the battery) you will be brought back to WinMo. Then you can just run haret again, and you're back in Android.
There's a dual-boot app - if you wish, just don't ask for support here. Post in the thread related to the tool. It's called Gen.Y.
arrrghhh said:
Download this, extract to the root of your SD. Grab the correct startup.txt. Click haret.exe. Enjoy.
FYI - we can't help with Gen.Y, so if you're having issues with it post in a thread for Gen.Y. XDAndroid has nothing to do with Gen.Y.
Click to expand...
Click to collapse
OK I am DLing this.
I really want to try this out on my ATT Tilt2. Currently running winmo energytom...
Where do I grab the correct startup.txt ????
Any help appreciated!
Prodeje79 said:
OK I am DLing this.
I really want to try this out on my ATT Tilt2. Currently running winmo energytom...
Where do I grab the correct startup.txt ????
Any help appreciated!
Click to expand...
Click to collapse
I believe that bundle has a folder - STARTUPS - just fine your device and use the appropriate startup.txt.
arrrghhh said:
I believe that bundle has a folder - STARTUPS - just fine your device and use the appropriate startup.txt.
Click to expand...
Click to collapse
ah ha! OK and there is a nice readme in there too.
OK so heres the tilt2 startup"
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 clock-7x00.a11=500 msmvkeyb_toggle=off gsensor_axis=-1,-2,3 force_cdma=1 physkeyboard=tilt2 rel_path=andboot"
boot
Click to expand...
Click to collapse
hmmm doesn't force_cdma=1 seem incorrect for a ATT tilt2 on ATT 3g???
So basically create an xandroid directory on my SD card and add the line rel_path=xdandroid to the startup?
And copy those contents to that folder?
OK booting into xandroid, but no cell signal or data.
g sensor or something seems off in regards to landscape mode on my phone....
i will continue to search the forum, but any help appreciated!
I had the same problem, but be patient... After the first Boot give it about 10 Minutes time, then it should work. So it did at my TP2.
But after this installation I could see the new version here http://sites.google.com/site/androidport/downloads downloaded the cab, deleted the old files, deinstalled them via WM 6.5 menu, installed the new files but always get an error Anybody in success with the newest version?
And: Anybody here where bluetooth is working?
pf said:
I had the same problem, but be patient... After the first Boot give it about 10 Minutes time, then it should work. So it did at my TP2.
Click to expand...
Click to collapse
still no dice, says no service after 30 minutes in android.
EDIT: OK found APN info, but still just says searching, I will keep trying to get the APN in the settings.
found these:
http://www.jayceooi.com/2011/01/20/apn-settings-for-android-to-enable-internet-mms/
http://groups.google.com/group/android-developers/browse_thread/thread/7613f4a8cea47ebb
Prodeje79 said:
still no dice, says no service after 30 minutes in android.
EDIT: OK found APN info, but still just says searching, I will keep trying to get the APN in the settings.
found these:
http://www.jayceooi.com/2011/01/20/apn-settings-for-android-to-enable-internet-mms/
http://groups.google.com/group/android-developers/browse_thread/thread/7613f4a8cea47ebb
Click to expand...
Click to collapse
Prodeje79 said:
ah ha! OK and there is a nice readme in there too.
OK so heres the tilt2 startup"
hmmm doesn't force_cdma=1 seem incorrect for a ATT tilt2 on ATT 3g???
So basically create an xandroid directory on my SD card and add the line rel_path=xdandroid to the startup?
And copy those contents to that folder?
Click to expand...
Click to collapse
If you are GSM, force_cdma needs to =0, you are correct. Please change this value accordingly.
Perhaps we need to tear thru the startups and clean them up!
arrrghhh said:
If you are GSM, force_cdma needs to =0, you are correct. Please change this value accordingly.
Perhaps we need to tear thru the startups and clean them up!
Click to expand...
Click to collapse
After a couple of trys it works now!!!!!!!!!!
The APN came in automatically and now my "duplicate" shows on the list too.
OK time to test this out.
I still have a landscape/portrait problem going on.
In settings menus, keyboard hidden, the screen is facing as if keyboard open, but upside down.
any ideas???
Prodeje79 said:
After a couple of trys it works now!!!!!!!!!!
The APN came in automatically and now my "duplicate" shows on the list too.
OK time to test this out.
I still have a landscape/portrait problem going on.
In settings menus, keyboard hidden, the screen is facing as if keyboard open, but upside down.
any ideas???
Click to expand...
Click to collapse
You need to quit posting the same question in multiple threads.
I already answered your question here.
Related
Hi Folks,
I'm looking for an Original HTC Artemis Bootscreen an how to change it.
The T-Mobile Screen is ugly.
Can Anybody help me?
Thunderhawk36
Thunderhawk36 said:
Hi Folks,
I'm looking for an Original HTC Artemis Bootscreen an how to change it.
The T-Mobile Screen is ugly.
Can Anybody help me?
Thunderhawk36
Click to expand...
Click to collapse
use this file. just copy it in windows dir and soft-reset.
ai_99 said:
use this file. just copy it in windows dir and soft-reset.
Click to expand...
Click to collapse
Sorry, but i'm looking for the screen just before the welcome screen.
The one where the Rom Version is shown.
Thanks
Thunderhawk
Hmm.. how many times do ya actually reset your phone to look at that screen?
MasK said:
Hmm.. how many times do ya actually reset your phone to look at that screen?
Click to expand...
Click to collapse
Not very much times , but the pink T-Mobile Logo is going to nerve me.
Thunderhawk
Thunderhawk36 said:
Not very much times , but the pink T-Mobile Logo is going to nerve me.
Thunderhawk
Click to expand...
Click to collapse
getting on my nerves too.. want a nice bluefish over there... have figured it out?
Yep you need to flash a new rom because as far as I know thats the only way it can be changed since its written at the same time as the ROM. Tom's B&Bv3 has just changed mine from the o2 default to the HTC logo, ask him how he did it but I'm pretty sure you need a new ROM with the logo of your choice embedded.
PS: Don't think you can do the log seperately either but I'm sure a more knowledgable person will be along shortly
markquinton said:
Yep you need to flash a new rom because as far as I know thats the only way it can be changed since its written at the same time as the ROM. Tom's B&Bv3 has just changed mine from the o2 default to the HTC logo, ask him how he did it but I'm pretty sure you need a new ROM with the logo of your choice embedded.
PS: Don't think you can do the log seperately either but I'm sure a more knowledgable person will be along shortly
Click to expand...
Click to collapse
Totally not going for me.. just upgraded to wm6 and the new activesync... maybe that's the reason?
There was a way I heard of using the RUU and replacing a file with the new image you wanted for splash...
"Perhaps you should look at this thread: http://forum.xda-developers.com/viewtopic.php?t=12898.
There is a great program on there for converting pictures to .nb files and also a CAB which, when run, will change the boot images.
This does require putting the splash1.nb and splash2.nb files into the /windows/ directory before running MDA3_bootimage_changer2.CAB,
but if you want to just run a CAB file you can just edit that CAB and place your own created splash1.nb and splash2.nb files
in it with the location set as /windows/ (I tried it with WinCE CAB Manager and this way works as well)."
http://forum.xda-developers.com/showthread.php?t=231632
eppoeh said:
Totally not going for me.. just upgraded to wm6 and the new activesync... maybe that's the reason?
Click to expand...
Click to collapse
It does depend on the rom, B&B v1 & 2 didn't update my boot screen but v3 did so maybe you've got an old version? Are you actually using the B&B rom at all? Not all rom updates change the boot screen, it depends on the chef if they include em in the first place
markquinton said:
It does depend on the rom, B&B v1 & 2 didn't update my boot screen but v3 did so maybe you've got an old version? Are you actually using the B&B rom at all? Not all rom updates change the boot screen, it depends on the chef if they include em in the first place
Click to expand...
Click to collapse
B&B? Did i miss something?
Tried two ways:
1: making the splash1 and splash2
2: tried RUU updating the splash, but fails, think it's the new activesync.
Did i mention that i'm trying this on a htc p3300?
Sorry, B&B is Black & Blue. Its the ROM that Tom Codon has been releasing and updating for the P3300\Artemis\Orbit.
Can be found here: http://forum.xda-developers.com/showthread.php?t=314568
http://www.4shared.com/file/19395089/5971579/Upgrade_HTC_First_Splash.html
dopod/HTC/O2/Orange/T-Mobile Boot Screen
LINK:http://www.aray.cn/?p=1362
zrays said:
[IMAGE]
dopod/HTC/O2/Orange/T-Mobile Boot Screen
LINK:http://www.aray.cn/?p=1362
Click to expand...
Click to collapse
Can somebody please explain the chinese over there? Or give another diescription?
Getting the message: "The image file is corrupted. Please check your Update utility"
eppoeh said:
Getting the message: "The image file is corrupted. Please check your Update utility"
Click to expand...
Click to collapse
CID lock was back? Did a hard reset, unlocked again.. now i can flash again
still no custum bootscreen though
eppoeh said:
CID lock was back? Did a hard reset, unlocked again.. now i can flash again
still no custum bootscreen though
Click to expand...
Click to collapse
still no image... bad splash.nb i guess... seeing nice colored rows now (green to black)
eppoeh said:
still no image... bad splash.nb i guess... seeing nice colored rows now (green to black)
Click to expand...
Click to collapse
WOOT, Finally, i got things running
How i did it:
search the forum for: "3-splash-screens.txt"
do step 2 (might run it in a dos box, to see errors)
search the forum for: "dutty's good NBH tool v1.1"
make the nbh file
flash it into the phone
Dudes Guys
ZRAYS give you the link on post 14.
Just download the right file depending on the logo you want.
Weblink : http://www.aray.cn/?cat=34
zip files are:
P800-logo-dopod.rar
P800-logo-HTC.rar
P800-logo-HTC-new.rar
P800-logo-O2.rar
P800-logo-Orange.rar
P800-logo-T-Mobile.rar
Shall I install it for you then...
Unzip the file go on folder etc... (backup your data, but this upgrade does destroy it) launch ROMUpdateUtility.exe
..wait and smile.
am looking for a cooked version of android 2.1 for htc touch pro2 tmobile.
thaNX
deepsingh said:
am looking for a cooked version of android 2.1 for htc touch pro2 tmobile.
thaNX
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=627997
Thats android eclair 2.0.1, thats all there is just now.
A natively booting 2.1 ROM doesn't even exist for the Rhodium yet... 2.0.1 is the latest build we have for this device, and it doesn't boot from ROM.
http://forum.xda-developers.com/showthread.php?t=641021
sahhar1993 said:
http://forum.xda-developers.com/showthread.php?t=641021
Click to expand...
Click to collapse
How to install this on Rhodium? I didn´t get it working...it says zImage faild to load...I already copied the STARTUP.txt from the rhodium android!
RobbyTouchHD said:
How to install this on Rhodium? I didn´t get it working...it says zImage faild to load...I already copied the STARTUP.txt from the rhodium android!
Click to expand...
Click to collapse
i got it to load but screen doesnt work ...
sahhar1993 said:
http://forum.xda-developers.com/showthread.php?t=641021
Click to expand...
Click to collapse
that works on rhodium?
cdiesel said:
that works on rhodium?
Click to expand...
Click to collapse
yea it loads and everything just fine with the startup from the rhod 2.0.1 build but the touch screen doesnt work after you click the android icon...
http://www.megaupload.com/?d=XH72576R
here is one built for the Rhod... but again i cant get the screen to work properly after the android dude... and make sure u extract it to the root fo your SD card
...
I am sure someone else here can make it work properly
nemo0405 said:
yea it loads and everything just fine with the startup from the rhod 2.0.1 build but the touch screen doesnt work after you click the android icon...
http://www.megaupload.com/?d=XH72576R
here is one built for the Rhod... but again i cant get the screen to work properly after the android dude... and make sure u extract it to the root fo your SD card
...
I am sure someone else here can make it work properly
Click to expand...
Click to collapse
tried using it but kept getting a zimage error
edit... the link u posted its in boot mode lets see if itll work
that works on rhodium?
Click to expand...
Click to collapse
yes just read the first post and asking klinux
i can help you
cdiesel said:
tried using it but kept getting a zimage error
edit... the link u posted its in boot mode lets see if itll work
Click to expand...
Click to collapse
so did u get the screen to calibrate right? people said "use the rootfswithcalibration.img file"
i tried that but still cant get it right... i feel only the left side of the touch screen is working because when it goes to the lock screen, you can drag the unlock button about half way but you cannot do anything with the volume button on the right...? i dunno ahhh lol
nemo0405 said:
so did u get the screen to calibrate right? people said "use the rootfswithcalibration.img file"
i tried that but still cant get it right... i feel only the left side of the touch screen is working because when it goes to the lock screen, you can drag the unlock button about half way but you cannot do anything with the volume button on the right...? i dunno ahhh lol
Click to expand...
Click to collapse
yeah once i got past touching the droid image nothing was responsive. i even tried using the calibration file i had eclair
cdiesel said:
yeah once i got past touching the droid image nothing was responsive. i even tried using the calibration file i had eclair
Click to expand...
Click to collapse
i wonder if we post this under the 2.0.1 forum and someone will help us calibrate
nemo0405 said:
i wonder if we post this under the 2.0.1 forum and someone will help us calibrate
Click to expand...
Click to collapse
Ive gotten it working with the "rootfswithcalibration" file. I Didnt change anything other than adding a tilt2 startup.txt (unfortunately this older rootfs does not support any of our new keyboard maps, or wifi), renaming to rootfs.img and dropping it in the folder. Make sure you do not have a ts-calibration file in your android boot folder, and try again!
Reefermattness said:
Ive gotten it working with the "rootfswithcalibration" file. I Didnt change anything other than adding a tilt2 startup.txt (unfortunately this older rootfs does not support any of our new keyboard maps, or wifi), renaming to rootfs.img and dropping it in the folder. Make sure you do not have a ts-calibration file in your android boot folder, and try again!
Click to expand...
Click to collapse
which one is the "rootfswithcalibration" ?
nemo0405 said:
which one is the "rootfswithcalibration" ?
Click to expand...
Click to collapse
Im using this http://xdandroid.southcape.org/rootfs/ latest rootsf on here and it works fine and now the keys work also if u wana give this one a shot.
When booting into Android this error message appears a few times.
An error occured on sub __main_androidexitcheck.
Value does not fall within the expected range.
Continue?
Click to expand...
Click to collapse
I can still boot into Android but have to click 'Yes' a few times through-out the loading process.
The only thing I did to configure this was to add 'andboot' using regedit.
Is there anything else I should have done?
ilabstudios said:
When booting into Android this error message appears a few times.
I can still boot into Android but have to click 'Yes' a few times through-out the loading process.
The only thing I did to configure this was to add 'andboot' using regedit.
Is there anything else I should have done?
Click to expand...
Click to collapse
dats y i hate doin regedits...lol its always somethin..lol theres an easier way buddy..in the android cab thread, theres a link to a specially modified Gene Y dual boot that points specifically to the Andboot folder. i had ur same prob at first. none of original dwnloads points to that folder...they go off the old Android folder. i think its modified by Phh ..cant exactly remember....if u see Eghoti up here, send him a pm...he can give u da direct link to the modified gene Y dual boot cab. im posting from my tilt 2. unless u get ur regedit downpacked u got to get the modified cab
demandarin and I had a back and forth trying to get the dualboot to load properly. In the end we used this cab for the rhodium and it seems to work out of the box without any edits:
http://forum.xda-developers.com/showpost.php?p=5972370&postcount=545
not sure if you will have to go back and revert edits you may have already made though.
eghoti1 said:
demandarin and I had a back and forth trying to get the dualboot to load properly. In the end we used this cab for the rhodium and it seems to work out of the box without any edits:
http://forum.xda-developers.com/showpost.php?p=5972370&postcount=545
not sure if you will have to go back and revert edits you may have already made though.
Click to expand...
Click to collapse
Thanks. I installed version 5 of the .cab but never worked. I'll give this one a go.
yeah, that one wrks perfect for me. hopefully, itll wrk for you.
Sent from my AOSP on XDANDROID MSM using the XDA mobile application powered by Tapatalk
wat dual boot loader should i use i have a tp2 with a valkrye rom im posting in android xdandroid is tha bomb f apple iphone
Sent from my AOSP on XDANDROID MSM using the XDA mobile application powered by Tapatalk
wat dual boot loader should i use i have a tp2 with a valkrye rom im posting in android xdandroid is tha bomb f apple iphone
Sent from my AOSP on XDANDROID MSM using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
You probaly wanna checkout Gene Y Dual Boot. its for Rhodium(TP2 or TILT 2). Plenty of info in the threads.
Sent from my AOSP on XDANDROID MSM using the XDA mobile application powered by Tapatalk
Thanks!
I love this forum. I can find so many things I need to know about XDAndroid. Thanks for the GenYDualBoot Link (that actually works)
HELP PLZ
im getting this error.
An error occursed on sub__main_bootandroid Win32exception Continue
i got android and its working but wen i go to dual boot this error keeps showing.
i installed Gen.Y on my device internal memory and Android on my storage card.
123456789abca said:
im getting this error.
An error occursed on sub__main_bootandroid Win32exception Continue
i got android and its working but wen i go to dual boot this error keeps showing.
i installed Gen.Y on my device internal memory and Android on my storage card.
Click to expand...
Click to collapse
im having some issues also with the Gene Y dual boot and this new build with the EXT2. when i dual boot, it hangs in haret loader in the beginning for some reason. ill have to look into it some more. my android still boots up fine but with the dual boot, it isnt for some reason. I didnt have this issue with previous builds that used the system sqsh files. I believe the EXT2 partition isn't acting right with the dual boot for whatever reason.
im not sure which build you are using. If u still on the builds using system sqsh, did u try to use the link in the previous posts? it should work fine. its a link to a modified gene y dual boot cab that wrked perfectly for me until i switched to the Ext2 build.
I got the same error on Tilt 2 from AT&T with WM 6.5.
"Gen.Y DualBOOT WVGA v1.0.6.0 - Storage Card.cab" is installed on device internal memory and Android files are stored the root of storage card.
Android is able to run if manually clicked the "haret.exe" from the File Exporler.
eghoti1 said:
demandarin and I had a back and forth trying to get the dualboot to load properly. In the end we used this cab for the rhodium and it seems to work out of the box without any edits:
http://forum.xda-developers.com/showpost.php?p=5972370&postcount=545
not sure if you will have to go back and revert edits you may have already made though.
Click to expand...
Click to collapse
Thank you for sharing the link. I was having issues with dual loader but the one you provided works awesome.
hello,
I have installed XDandroid on my htc touch pro2. But i can't connect to my network (provider). I search for many days now, but i can't find any solution.
i have the manila version on my htc.
Thnx in advance.
dubbelr said:
hello,
I have installed XDandroid on my htc touch pro2. But i can't connect to my network (provider). I search for many days now, but i can't find any solution.
i have the manila version on my htc.
Thnx in advance.
Click to expand...
Click to collapse
#1 reason is probably the force CDMA command in the startup.txt. If you're CDMA, you need it to =1, if you're GSM you need it to =0. Check that & get back to us.
thnx for helping
that was the problem
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
swaters3 said:
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
Click to expand...
Click to collapse
startup.txt. Perhaps you need to read the FAQ my friend.
swaters3 said:
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
Click to expand...
Click to collapse
You are on Sprint, so Force CDMA=1. Also probably the number one reason you have no service is the SIM card is still in. Remove the SIM and re-try Android.
arrrghhh said:
startup.txt. Perhaps you need to read the FAQ my friend.
Click to expand...
Click to collapse
I read throught the faq and tried everything but it still doesnt connect. Im gonna download it again and try again.
thanks
demonlordoftheround said:
You are on Sprint, so Force CDMA=1. Also probably the number one reason you have no service is the SIM card is still in. Remove the SIM and re-try Android.
Click to expand...
Click to collapse
I have tried removing the sim card in the past and i tried again. now what happens is that with force cdma checked it keeps trying to connect and then disconnects 20 seconds later over and over. I try to access the wireless networks settings but because it keeps disconnecting it goes back so it doesnt have achance to search for wireless networks.
If i dont force cdma then nothing happens and when i search for wireless networks it just keeps and searching but nothing happens. any help would be appreciated.
So wifi has nothing to do with CDMA/GSM... Typically wifi gets hosed from people who update their zImage but not their modules - they go hand-in-hand and while you can run without the modules, stuff like wifi won't work at all.
arrrghhh said:
So wifi has nothing to do with CDMA/GSM... Typically wifi gets hosed from people who update their zImage but not their modules - they go hand-in-hand and while you can run without the modules, stuff like wifi won't work at all.
Click to expand...
Click to collapse
sorry i wasnt clear. i read through the faq and one suggestion is to go to settings and search for wireless networks meaning sprint atat etc. i actually do connect via wifi but i want to connect via sprint so i can use android as my operating system and play with it. any help would be appreciated.
swaters3 said:
sorry i wasnt clear. i read through the faq and one suggestion is to go to settings and search for wireless networks meaning sprint atat etc. i actually do connect via wifi but i want to connect via sprint so i can use android as my operating system and play with it. any help would be appreciated.
Click to expand...
Click to collapse
Ok you're still not being clear.
I assume your issue is you can't connect to the internet via the cell radio? Thru Sprint's network instead of wifi?
Can you make/receive calls? If so, data *should* just connect, assuming you're using relatively new stuff. A while ago you had to create an APN manually to connect, but that shouldn't be the case any more...
arrrghhh said:
Ok you're still not being clear.
I assume your issue is you can't connect to the internet via the cell radio? Thru Sprint's network instead of wifi?
Can you make/receive calls? If so, data *should* just connect, assuming you're using relatively new stuff. A while ago you had to create an APN manually to connect, but that shouldn't be the case any more...
Click to expand...
Click to collapse
i cant make phone calls. i can connect to wifi. any help would be app. thanks.
swaters3 said:
i cant make phone calls. i can connect to wifi. any help would be app. thanks.
Click to expand...
Click to collapse
Force cdma needs to =1 in your startup.txt CMDLINE section.
arrrghhh said:
Force cdma needs to =1 in your startup.txt CMDLINE section.
Click to expand...
Click to collapse
How do i access the force cdma. I use some sort of booting app that allows me to check or uncheck force cdma and to choose overclock speeds and update to newer versions. I dont see any place where i can access any stratup.txtThanks for your help. I would really love to try out android. Sprint wont let me update to any other smart phone but the tp2 (not that that is a bad thing) unless i upgrade my plan. I pay 5$ for unlimited data
swaters3 said:
How do i access the force cdma. I use some sort of booting app that allows me to check or uncheck force cdma and to choose overclock speeds and update to newer versions. I dont see any place where i can access any stratup.txtThanks for your help. I would really love to try out android. Sprint wont let me update to any other smart phone but the tp2 (not that that is a bad thing) unless i upgrade my plan. I pay 5$ for unlimited data
Click to expand...
Click to collapse
You don't want to know what I pay...
So I'm not sure how to explain this. Your startup.txt is a file you edit - where you run haret.exe from?
It sounds like you installed the cab, which unfortunately means you probably know nothing about how the system is put together, even at a high-level. Which is a shame...
With that said, assuming you're running v1.3 of the startup app, it should work fine. I cannot, and will not support that app. If you need support for that app, please go to sov's thread on the application.
If you want help on XDAndroid, then we can help... but we encourage you to search, read, research, search again, read some more, do a little more research, and then you may be ready to post. Maybe.
. .. fg
arrrghhh said:
You don't want to know what I pay...
So I'm not sure how to explain this. Your startup.txt is a file you edit - where you run haret.exe from?
It sounds like you installed the cab, which unfortunately means you probably know nothing about how the system is put together, even at a high-level. Which is a shame...
With that said, assuming you're running v1.3 of the startup app, it should work fine. I cannot, and will not support that app. If you need support for that app, please go to sov's thread on the application.
If you want help on XDAndroid, then we can help... but we encourage you to search, read, research, search again, read some more, do a little more research, and then you may be ready to post. Maybe.
Click to expand...
Click to collapse
can you direct me to where i can learn how to simply install android without the cab file. My research brought me originally to the cab file. I dint realize there was another way to install android.
Thanks for your help
swaters3 said:
. .. fg
can you direct me to where i can learn how to simply install android without the cab file. My research brought me originally to the cab file. I dint realize there was another way to install android.
Thanks for your help
Click to expand...
Click to collapse
There's CAB and RAR download's on Reef's download page...
arrrghhh said:
There's CAB and RAR download's on Reef's download page...
Click to expand...
Click to collapse
thanks for your help. I am in the middle of search and researching it.
Hopefuly ill get it to work.
What radio version do you have on your device?
gamescan said:
What radio version do you have on your device?
Click to expand...
Click to collapse
..
running stock sprint 6.5 update radio version 2.32.00wf. Please help me if you can im ready to give up. I am no expert just know how to download cab files and install them to my phone. Im very good at using the phone but not good at any type of programming. I do enjoy using all the great programs that have made the tp2 great and would love to use android without changing plans and moving from a resistive touc screen which i prefer.
thanks
Hello, I have an AT&T Tilt 2 and when I want to boot off xdandroid 2.2.1 I did the .cab file, soft reset, startup.txt, went into the program, update, boot. It types a bunch of codes, and stops at misc_register(): OK. And it stays there as long as I can see! It won't go any further, however, when I restart the phone, it boots normally in to WinMo. I'm running the stock shipped ROM. Does that have anything to do with it? I'm not getting any errors or anything, just stuck at that. And I know it's not me not waiting, because I've sat it down for 2 hours straight! Please help I really want Android on my Tilt 2.
P.S. I've tried RAR and CAB, also the Reference & Froyo!
Try a clean bundle. Format the card using the HP tool. Full format, FAT32.
Also, try this bundle. It's the newest of the new.
thephoneguru said:
Hello, I have an AT&T Tilt 2 and when I want to boot off xdandroid 2.2.1 I did the .cab file, soft reset, startup.txt, went into the program, update, boot. It types a bunch of codes, and stops at misc_register(): OK. And it stays there as long as I can see! It won't go any further, however, when I restart the phone, it boots normally in to WinMo. I'm running the stock shipped ROM. Does that have anything to do with it? I'm not getting any errors or anything, just stuck at that. And I know it's not me not waiting, because I've sat it down for 2 hours straight! Please help I really want Android on my Tilt 2.
P.S. I've tried RAR and CAB, also the Reference & Froyo!
Click to expand...
Click to collapse
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
dcmedic said:
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
Click to expand...
Click to collapse
ooooooh!
I will try this startup for my tilt2!
I am having issues like screen landscaping wrong way sometimes etc.
I will report back. Perhaps we get them to pack your startup in the file under "Tilt 2 ATT GSM" or something!
What SD card did you end up getting?
Thanks!
Prodeje79 said:
ooooooh!
I will try this startup for my tilt2!
I am having issues like screen landscaping wrong way sometimes etc.
I will report back. Perhaps we get them to pack your startup in the file under "Tilt 2 ATT GSM" or something!
What SD card did you end up getting?
Thanks!
Click to expand...
Click to collapse
I already had multiple sd cards, Tiad brought it up to try and change my sd card in a conversation the other day, but I'm using a SanDisk 2GB. My SanDisk 4GB is about 4 years old and believe they do wear out. Older cards aren't good for what we need here, since they are basically or on board device storage.
As for the landscaping, sometimes if a hold the phone flat it will switch to landscape left or right, but I usually do not have a problem when I'm holding it in the orientation I'm needing.
That is the same startup file I have used through out 3 different builds. FRX03, FRX04, and FROYO X. I did have overclocking in there, but come to find out it didn't help, I feel that it probably was the cause of a few of my restarts.
I hope everything works out for you. Report back..
dcmedic said:
I already had multiple sd cards, Tiad brought it up to try and change my sd card in a conversation the other day, but I'm using a SanDisk 2GB. My SanDisk 4GB is about 4 years old and believe they do wear out. Older cards aren't good for what we need here, since they are basically or on board device storage.
As for the landscaping, sometimes if a hold the phone flat it will switch to landscape left or right, but I usually do not have a problem when I'm holding it in the orientation I'm needing.
That is the same startup file I have used through out 3 different builds. FRX03, FRX04, and FROYO X. I did have overclocking in there, but come to find out it didn't help, I feel that it probably was the cause of a few of my restarts.
I hope everything works out for you. Report back..
Click to expand...
Click to collapse
will do!
which exact package are you using now?
link appreciated if not already posted above.
Is it a good idea to delete the ts-calibration file as in XDAndroid2.2Froyo.012211 ?
Any other cleanup measures?
Prodeje79 said:
will do!
which exact package are you using now?
link appreciated if not already posted above.
Is it a good idea to delete the ts-calibration file as in XDAndroid2.2Froyo.012211 ?
Any other cleanup measures?
Click to expand...
Click to collapse
I'm using the same package as arrrrrgh posted in Post #2. I just left the touch screen calibration file that came with the package. No other clean up, other than full format to fat32 with your preferred utility.
dcmedic said:
I'm using the same package as arrrrrgh posted in Post #2. I just left the touch screen calibration file that came with the package. No other clean up, other than full format to fat32 with your preferred utility.
Click to expand...
Click to collapse
OK cool, I will give that load a shot tonight.
As of now I am using: XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE
My screen issues are gone now with those tweaks! thanks so much!!!
Although now this thing seems dog slow.
I took out my line "clock-7x00.a11=500" which I think is just stock anyway.
You do not use this command as you noted issues overclocking. Thus yours should be stock speed too right?
This thing is sloooooow now from earlier with my old 'incorrect' stock config in the RAR package.
I also have the weird typing issue in which I press c once (on the hard keyboard slideout), but cccc appears. I think if I type a word super slow, it works better.
So if i type cingular at a decent pace, it will type out 'ccccingularrr'
Any leads on that?
you may need to delete your data.img file and rebuild it with the new startup.txt. that way android is running at stock speed during the setup. shot in the dark.
Sent from my Tilt 2 using the XDA mobile application powered by Tapatalk
Prodeje79 said:
OK cool, I will give that load a shot tonight.
As of now I am using: XDANDROID.2.2.1.AOSP.FRX03.21.11.10.FULL_PACKAGE
My screen issues are gone now with those tweaks! thanks so much!!!
Although now this thing seems dog slow.
I took out my line "clock-7x00.a11=500" which I think is just stock anyway.
You do not use this command as you noted issues overclocking. Thus yours should be stock speed too right?
This thing is sloooooow now from earlier with my old 'incorrect' stock config in the RAR package.
I also have the weird typing issue in which I press c once (on the hard keyboard slideout), but cccc appears. I think if I type a word super slow, it works better.
So if i type cingular at a decent pace, it will type out 'ccccingularrr'
Any leads on that?
Click to expand...
Click to collapse
Holy crap dude... search. You've asked so many questions that have been answered previously, seriously.
With that said, all the issues you describe are all related to the system_server bug. Just make a call to voicemail (or any call really) and it'll clear up. We're looking into the cause and a potential solution.
dcmedic said:
Greetings,
I too have a Tilt 2. In the past I've had many problems with xdandroid and other android ports. I personally prefer to use the manual installation, that way I can control what and where things are placed. I'm currently running the the latest FRX04 release on my Tilt2. Here is how I got it working.
1..Download the RAR package.
2..Format your SD Card (not a quick format)
3..Copy the andboot directory to your SD Card
4..Replace the startup.txt with the one attached here.
5..In WinMo run Haret and let it do it's thing.
6..Once in Android test all your apps.
This worked for me, but until I switched to a newer SD Card I would have random reboots and hang ups.
Post any more complications you have I may be able to help you.
Click to expand...
Click to collapse
Hello, thank you for the quick response. I did exactly what you said. And once I tap Haret it codes and stops at misc_register(): OK still... Any other suggestions? Thank you agian.
it probably doesn't matter, but is your phone all unlocked etc and able to be flashed with any winmo rom?
using olipro?
just trying to think of any differences with our phones.
Prodeje79 said:
it probably doesn't matter, but is your phone all unlocked etc and able to be flashed with any winmo rom?
using olipro?
just trying to think of any differences with our phones.
Click to expand...
Click to collapse
What is unlocked? Isn't that where T-Mobile would be able to use it?? If not, please explain. Sorry for my stupidness. lol
Is it like jailbreaking and/or rooting?
You do not need to do hardSPL unlocking to use Android from the SD card.
I would imagine with NAND builds you would... but since this all runs off the SD card, no need for HSPL.
Assuming you're using that build that was posted in post #2, it should work just fine - did you make any changes to it, or just extract it to the root of your SD and hit haret.exe...?
thephoneguru said:
What is unlocked? Isn't that where T-Mobile would be able to use it?? If not, please explain. Sorry for my stupidness. lol
Is it like jailbreaking and/or rooting?
Click to expand...
Click to collapse
well mainly just the hard SPL unlocking. Not the sim.
very easy.
see the stickies here: http://forum.xda-developers.com/forumdisplay.php?f=490
mainly:
Hard-SPL Unlocker for Rhodium (AT&T Tilt 2) Released and Updated! New FAQ added!
http://forum.xda-developers.com/showthread.php?t=550131
and flashing...
[Resources] Flashing your First GSM Rhodium Rom (For Noobs)
http://forum.xda-developers.com/showthread.php?t=550540
if you do this don't forget to task 29!
http://forum.xda-developers.com/showthread.php?t=649191
I use the energy rom GTX:
http://forum.xda-developers.com/showthread.php?t=562773
I just backed up all my contacts on my SD card with pimbackup and restored them to the new rom....
Again, to thephoneguru - you do not need to do that ^^.
Only if you want to install a custom WinMo ROM, or if you're flashing to full Android (which is not recommended at the moment!) do you need to do HSPL.
arrrghhh said:
You do not need to do hardSPL unlocking to use Android from the SD card.
I would imagine with NAND builds you would... but since this all runs off the SD card, no need for HSPL.
Assuming you're using that build that was posted in post #2, it should work just fine - did you make any changes to it, or just extract it to the root of your SD and hit haret.exe...?
Click to expand...
Click to collapse
I did not make any changes at all I just put the androot directory on the root of my sd, went to the file explorer and tapped haret.exe. Also, the sd card was just formatted (non quick format) to FAT32.
arrrghhh said:
Again, to thephoneguru - you do not need to do that ^^.
Only if you want to install a custom WinMo ROM, or if you're flashing to full Android (which is not recommended at the moment!) do you need to do HSPL.
Click to expand...
Click to collapse
well we get the picture!
its the only difference I can think of in our phones.
I say give it a shot, it is so simple!
Prodeje79 said:
well we get the picture!
its the only difference I can think of in our phones.
I say give it a shot, it is so simple!
Click to expand...
Click to collapse
How is it so simple? Can you explain the procedure? Thank you.
thephoneguru said:
How is it so simple? Can you explain the procedure? Thank you.
Click to expand...
Click to collapse
He posted a lot of links on how to do it... Post #15?
It won't have any effect on your issue tho. It'll only enable you to flash custom ROMs if you so choose to do so.
Let's focus on your issue. Can you tell me where it stops? Does it always stop at the same place? Have you tried different kernels? Any different builds? Have you tried the newest FRX04 build?