Hi i have an HTC Desire and i like to use it to listen to music in my car stereo, however the a2dp does not auto connect when i get in the car unless i manually connect it, is there an app that auto connects the a2dp headset profile on froyo??
Related
A2DP Blueooth Car Stereo won't reconnect to mobile
I have the Pioneer DEH-P9800BT Bluetooth Head Unit in my car, which supports stereo BT music streaming from any A2DP device.
I also have the HTC TyTN II Mobile which supports the same.
I have paired the two devices, and on the initial pairing successfully played music from the HTC through the Pioneer. When that worked, the BT Audio icon appears in the title bar of the mobile (headphones with a musical note in the middle).
However, after switching off the car and later returning, I have 2 issues:
1) It is impossible to reconnect the BT stereo music playback, unless I delete the Pioneer device from the list of BT devices within the mobile phone, then pair them again. Nothing else seems to work. Simply, I just want all music to be routed through the Pioneer whenever it is in range of the mobile.
2) I have set the mobile phone as "Phone 1" in the Pioneer, and have enabled "Auto Connect", yet it does not auto connect. Every time I get in the car I have to manually scroll to Telephone>Function>Connect Phone>Phone 1. You can imagine what a laborious pain that is compared to my previous 5 year old Nokia Bluetooth Car Kit which just auto-connects whenever my mobile is in range.
Are you able to solve either problem?
Im having the same problems with my sony DR-BT10CX and Moto HT820 whenever i turned either devices off. But whenever i turned them back on, i usually uncheck and recheck the headset whenever i want to use A2DP. It's a pain but i never had to re-pair my device with my tilt.
Try unchecking/checking the bluetooth device instead of re-pairing them (although in your case, its a PITA).
Have you tried updating the firmware on the Pioneer (if its possible anyways).
I have an ATT Tilt w/ the my customized HTC rom. But my JVC BT1 never has any problem to reconnect to my phone.
1) I found a program called A2DPToggle which provides an on/off button on the home page to solve this
2) I found I have to leave the phone in 'visible' Bluetooth mode for auto-connect to work. Less secure, but solves the problem
While this may not help, while messing with my Audio linking between my pda and pc , The PC BT adaptor would freeze if I tried to stream an AAC file or a non mp3 file. It would play it for 10-15 seconds then freeze. I imagine not all mp3
s are created equal for BT purposes either.
I have a Jabra BT620s bluetooth wireless stereo headset which I use as an headset and my music headset on the touch hd. I paired them succesfully and playing music with mediaplayer works perfectly.
The problem is when I turn on my Jabra headset. It pairs with my phone fine, but it isnt set as wireless stereo on start. So I have to set it in the bluetooth configuration screen everytime I turn the headset on, cause else the music plays over the speaker of the phone.
Is there anyway to let windows mobile always be forced to set the headset as wireless stereo?
Same problem with Funkwerk EGO Talk
I've have got the same problem with Funkwerk EGO Talk Bluetooth carkit with A2DP. Pairs at the start with Headset Profile, so calling works(except the hangup button btw, ?which redails?? most of the time). But it doesn't start the wireless stereo profile.
I have to "Set as wireless Stereo" everytime i reconnect with the carkit
Anyone has a solution or workaround to start "Set as Wireless Stereo" automaticly or at least in 1 button?
Guys, using the search function would have turned up the following solutions found previously on these forums:
a) use Mortscript to macro the key presses
b) firmware update the headset (i.e. Jabra)
c) try turning on music and bluetooth before the headset - worked for some people
I have the same problem as you, any other suggestions?
I've the same problem with Moto music/blutooth headset
Hmmm
I don't have this problem with my Sony-E HBH BT set. Each time I turn it on the pairing is automatic and get stereo immediately.
I also can have the pocket player or TF3D media player running or not and it will change "on the fly" to BT when I turn on the headset.
No problem here with Motorola S805's.
I turn the phone BT on, turn the headphones on, press play on the headphones and get music.
I have the same problem with my motorola S705
Auto pairing with calls is ok but not with stereo A2DP. I must turn headset on manually in the bluetooth otpions which is quite long and annoying.
Pairing was working good with my TyTN. So there might be a problem somewhere
I've had some problems with my Samsung SBH170 not connecting at all.
I removed them from the BT settings and repaired, now they are found with out problems, allthough not very quickly.
In 'Advanced Configuration Tool 3.3' I came across 'Bluetooth Audio Gateway Service' which was disabeled, I enabled it and rebooted, but it doesn't seem to make any difference on my machine. According to this thread it may be required to enable audio over bluetooth: http://forum.xda-developers.com/showthread.php?t=424424
Regards JD
when paired to my headunit in the car if i switch between music and internet tv stream etc it drops the bluetooth and i have to reconnect it again.
is this a desire issue or bluetooth ?
also it doesn't auto connect like a headset does. is that a headunit issue or desire?
Is there any sort of app that can redirect phone calls through a2dp. I can get a gadget that will allow me to contorol my media player and stream music over bt to an iphone dock but I also need to calls to come throuhg those speaker. A microphone isnt a problem as the phone has one that will work fine. What I need to do is have phone calls,if an a2dp device is present and connected use that instead of the phones speaker. Otherwise I have to go buy a BT radio for my car. (which comes with an ipod dock but no bt)
you might could just use an auxiliary input to get just the audio out. Pretty sure you can't use a2dp for phone calls.
Sent from my PC36100 using XDA App
If the BT device has the headset profile you should be able to receive calls on it, many BT enabled car stereos and BT headphones are able to carry A2DP, AVCR and the headset profile.
I want the same for my Blackberry A2DP gateway in car
I have a blacberry A2DP gateway in my car that connects ipads, htc phone and iphone to the stereo input of my car sound system. The sound quality is excellent for all uses but the incoming phone calls are routed via the phone internal speaker unless I plug a second stereo cable into the car input jack.
Can I get htc hd2 windows mobile 6.5 phone mono into this gateway device to avoid having to connect a stereo cable to my phone output? It connects to the HTC as stereo audio only.
fenixjn said:
If the BT device has the headset profile you should be able to receive calls on it, many BT enabled car stereos and BT headphones are able to carry A2DP, AVCR and the headset profile.
Click to expand...
Click to collapse
So in other words,the answer is no,there IS no such app. As I said,I can buy a gadget that will connect A2DP to a I-Pod interface. It does NOT have headset profile.
Hi,
I just bought this watch, and I have a problem with my car Bluetooth connection.
The problem is that when I enter the car, the multimedia audio is set to car speaker, even if in the Bluetooth properties I disabled multimedia audio for this connection because I want that the audio remains on the phone.
Before this watch, I had an Android Wear watch and the car Bluetooth connection worked fine, the audio remained on the phone.
Since I have this watch the audio goes to the car speakers. If I enable and disable again the multimedia audio for the car connection properties then the audio correctly remains on the phone, but I have to do this every time.
Someone knows how I can make the audio remain on the phone?