Which Rom is the most STABLE Sense HD Rom - Desire Q&A, Help & Troubleshooting

Hey I wanted to ask the regular flashoholics that which sense hd Rom is the moat stable for daily use ....
The emphasis is on stability . That is running day to day smoothly without glitches and without requiring resets and the basics of phone being rock solid . That is phone call , sms and alarms....I can live with issues like no 720p recording .....
Thank you in advance
Sent from my HTC Desire using XDA App

Hi
RCmixHD V0.14of is absolutely superb. Its fast, stable, silky smooth, good battery. However, I did change the kernel from the one that comes with the ROM. The ROM comes with ziggies kernel, but I flashed Richard Trips very excellent V5e_1113mhz no audiomod svs kernel. It is a great kernel and integrates well with this HD ROM. I use setCPU also but without profiles. I just set it to minimum 245mhz and 1113mhz max using the smartass governor. All this fits together very well and my phone has no problems at all. Current widget shows between 2 and 6 milliamps when on standby.
I also have an app that alows to turn the screen off immediately with the touch of an icon. This saves a lot of battery time waiting for the screen to timeout.
Sorry, I have rambled on a bit!
btw. there are 2 versions of this ROM. The apps to SD version (my version) and the data to SD version which is version 0.14b (mine is v0.14of). Make sure you use the of version as even the developer Robocik says this is the most stable and fast version. Read throught the ROM's thread on XDA before taking the plunge. Good luck.

carlos67 said:
Hi
RCmixHD V0.14of is absolutely superb. Its fast, stable, silky smooth, good battery. However, I did change the kernel from the one that comes with the ROM. The ROM comes with ziggies kernel, but I flashed Richard Trips very excellent V5e_1113mhz no audiomod svs kernel. It is a great kernel and integrates well with this HD ROM. I use setCPU also but without profiles. I just set it to minimum 245mhz and 1113mhz max using the smartass governor. All this fits together very well and my phone has no problems at all. Current widget shows between 2 and 6 milliamps when on standby.
I also have an app that alows to turn the screen off immediately with the touch of an icon. This saves a lot of battery time waiting for the screen to timeout.
Sorry, I have rambled on a bit!
btw. there are 2 versions of this ROM. The apps to SD version (my version) and the data to SD version which is version 0.14b (mine is v0.14of). Make sure you use the of version as even the developer Robocik says this is the most stable and fast version. Read throught the ROM's thread on XDA before taking the plunge. Good luck.
Click to expand...
Click to collapse
Thanks a lot for the generous lengthy reply I was actually looking for a complete breakdown of the Rom with analysis rather than just a short answer .... so thank you very much . I'm on leeDroid 2.3b a2sd version and I am gonna nandroid backup it now and try the Rom which you mentioned
Cheers mate ....
Sent from my HTC Desire using XDA App

Make sure you wipe everything first including the dalvik cache. To install this ROM you first need to create an ext partition on your SD card. I used a 1GB Ext2 partition created with partition wizard home (free) edition. After you have done this make sure you set both (fat32 and ext2) to primary partition types, not logical. Otherwise you will get an error when trying to flash the ROM. To do this simply right click on the partition in P/magic and select "make primary"
Also, make sure you have debugging enabled on the phone and connect it to the PC with usb lead in charge only mode. This way there's no risk of power failure whilst flashing.
After flashing, it will take a while to boot-up. Just be patient and let it do its thing. Like I said read through Robociks thread first. I did and had no probs.
One other thing, Robocik is about to release an updated version v0.15 in next day or 2 so you may want to wait for this. However v0.14OF is awesome.

Related

[Q] Would you mind helping a Android noob?

Ok,I'm new to Android, fresh out of Windows Mobile and might not know what I'm talking about, so... here we go,
I'm looking for my dream ROM, and kernel combination
Is there a ROM out there that has:
Delicious Froyo
4G Enabled
Can use Bluetooth controllers - (Wiimote, MSI BGP 100) [I guess that means it'd have to be Senseless?]
Retains its HDMI out functionality
Uncapped FPS
Over 2 multi touch points
Stability - Doesn't crash often
Decent Battery Life - (More than 5 Hours)
Swype Keyboard
802.11N Wireless Support Enabled
Overclocking support would be nice, but probably not necessary
I'm currently running Fresh Rom, but its starting to seriously lag after a few weeks of use, I guess its because of all the apps and widget mods I installed. And stupid Sense keeps starting up when I start my phone, even though launcher pro is my default home.
So I'm ready to flash another rom to have a clean start, now that I kinda know what I want.
There isn't a ROM with all of that
Looks to me like most (if not all) of the things you want to do can be done on Fresh. If it's lagging, wipe the caches using Amon and see if that speeds things up. I ran Fresh for a long while with no issues. For the past 3 days, I've been trying out the latest Baked Snack rom, and it's very good, too. The only thing I'm not sure about is the multi-touch feature because I haven't come across the need for it yet. I recommend you do the same thing I'm doing and everyone else does: Download them, flash them, keep them for a few days, and then try another rom. You'll be able to eliminate the ones you don't care for and then narrow down your choices. Do a search for multi-touch and see which roms have fixes for it, and try those out first.
or at least ava froyo v7, thats got everything working for me and use a kingsxkernel
I believe most of those are functional on most of the ROMs now. As far as swype keyboard, I think calkulins ROM (evio2) has that natively, or there's a new ROM someone else was working on that I think had swype listed, it was called echo5 ROM, I think. It's not on the first page, it was on the 2nd page last time I saw it.
The fps, overclocking, and >2pt multitouch are all functions of the kernel, I believe. And the 2 main kernel devs (kingx, and netarchy) support those functions in their kernels, which will flash on most any custom ROM
(I'm fairly new, from winmo, too. I was reluctant and apprehensive for awhile, but really starting to like Android, not to mention most the great devs from winmo are drifting to Android, or already have. Xda has made the transition that much easier)
Sent from my PC36100 using XDA App
Like stated, any Rom can be anything. You can flash almost any kernel with any ROM..You can start with the stock ROM and flash what you want to get what you want...very customizable compared to WinMo.
That being said, I'm running Calkulin's EViO and love it. I can get almost 10th hours with heavy, heavy usage. With multitouch visualizer from the market, I can see 4 touch points. The phone is overlooked and fast as veal...never laggy. 4G works just fine. Lastly, the latest version has sense as an add-on, so no worries about it starting.
And, I have swype as an .apk if u want it.
Sent from my PC36100 using XDA App
Thanks for the quick replies peoples, I went and wiped both cache, and the dalvik cache... even though I have no idea what the dalvik is, I'm using Anon Ra btw.
Calkulens Rom and a kings kernel sound like what I'm looking for, but what about the Bluetooth I know that sense based roms have corrupted Bluetooth settings, so no gamepad, are calkulins roms senseless? And work with wiimotes?
Sent from my HTC EVO
VaelPak is the greatest. Just doesn't support bluetooth controllers but may be in an update soon
Swyped from my VaelPaked Evo 4G
Um no you can't flash kernels on most roms. They are either for sense roms or asop (senseless roms..cm6) you have to read the kernel thread... and swype you can install on any rom just search and you will find out the apk. For it. 4g doesn't work on cm6 so that's out the question then...
Most kernels are set to 1.19 to 1.22 top overclock.. setcpu is a paid app to over/underclock.. battery life there are a lot of things that causes bad battery. Bad reception, screen brightness, a app that keeps your phone awake, the settings of your CPU...etc...
Sent from my PC36100 using XDA App
awenthol said:
Like stated, any Rom can be anything. You can flash almost any kernel with any ROM..You can start with the stock ROM and flash what you want to get what you want...very customizable compared to WinMo.
That being said, I'm running Calkulin's EViO and love it. I can get almost 10th hours with heavy, heavy usage. With multitouch visualizer from the market, I can see 4 touch points. The phone is overlooked and fast as veal...never laggy. 4G works just fine. Lastly, the latest version has sense as an add-on, so no worries about it starting.
And, I have swype as an .apk if u want it.
10hrs of heavy use? Please explain heavy heavy use because I get 4 tops even with the battery trick.. btw I use a wall charger not the phone. I have tried about every rom including yours and what I call heavy heavy usage is non-stop on phone. I can be on here on full battery, txt and do research on phone and get only 4 tops. Even with underclock.. you use wifi during heavy usage? Stock battery?
Just don't believe 10 hours heavy usage...
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
So that combination of Calkulin's Rom and King's kernel will not work?
And does Overclocking seriously affect battery life?
ThaDSman said:
So that combination of Calkulin's Rom and King's kernel will not work?
And does Overclocking seriously affect battery life?
Click to expand...
Click to collapse
When you overclock your CPU is running faster than normal which in turn needs more juice... kind of goes hand in hand...
Yeah that should be fine. If I'm correct its a sense rom. When you look at a kernel you usually read what it has implemented and what your looking for in a kernel. They tell you which one its made for. Just was letting you know..
Also always do a nand backup in case of loops or anything goes wrong..
Sent from my PC36100 using XDA App

Froyo lockups

Hi all, am trying out loads of different builds but I'm finding a common theme..... Lockups
Have tried both the latest 2.6.25 and 2.6.32 with both panel 2 and 3 and since my battery won't last a day using .32 (have an extended battery on order) I'm trying to use .25
The lockups are completely random not just when waking but the LEDs stop flashing and the phone won't react, the buttons do still light up though....
Erm, what else? Oh am running both sys and data from NAND.
Sent from my Full Android on Kaiser using XDA App
Hi
been there... Im kinda newbie bout this but something that really helped me was to use l1qu1d's latest .25 nbh with warbyte's donut, try using atools to modify l1qu1ds nbh to ur needs (use the search tool in the forum to seek it, includes a tutorial!), use sys on nand and data on ext2 (or ext3), and THE MOST IMPORTANT PART OF ALL!! always keep a fresh /data backup. I do it before and after any mayor mod to my sys, cause i can assure you sooner or later u WILL have data corruption! but dont worry normally the solution is as simple as: reboot/d-pad/restore....
If you dont like donut (In my case i ADORE donut ) maybe you can give it a shot to this brand new scoot's release: http://forum.xda-developers.com/showthread.php?t=813382
PD try not to oc your cpu too much! drains the batt quicker and turns sys unstable! try asking n2rjt's bout batt problems in his thread http://forum.xda-developers.com/showthread.php?t=782269
albertorodast2007 said:
been there... Im kinda newbie bout this but something that really helped me was to use l1qu1d's latest .25 nbh with warbyte's donut, try using atools to modify l1qu1ds nbh to ur needs (use the search tool in the forum to seek it, includes a tutorial!), use sys on nand and data on ext2 (or ext3), and THE MOST IMPORTANT PART OF ALL!! always keep a fresh /data backup. I do it before and after any mayor mod to my sys, cause i can assure you sooner or later u WILL have data corruption! but dont worry normally the solution is as simple as: reboot/d-pad/restore....
If you dont like donut (In my case i ADORE donut ) maybe you can give it a shot to this brand new scoot's release: http://forum.xda-developers.com/showthread.php?t=813382
PD try not to oc your cpu too much! drains the batt quicker and turns sys unstable! try asking n2rjt's bout batt problems in his thread http://forum.xda-developers.com/showthread.php?t=782269
Click to expand...
Click to collapse
I used to overclock to 520, but now 450 seems as fast and is more stable.
And, uses much less battery. Android keeps data connected at all times. Our radio firmware was designed for WinMo, where the data is disconnected when idle. In a real Android phone, the radio firmware stays connected but still can go idle and use less battery. The best we can do is go to 2G when idle. I use the "Toggle 2G" app for that, and my battery lasts a long time.
Well, tried Fat Free Froyo again and it locked up on charge over night takng Data with it again.
Have installed Warbyte Donut onto ext so here goes.
I haven't overclocked my last few installs incase it was that and it made no difference.... Was only overclocking to 450 anyway....
Sent from my HTC Kaiser using XDA App
Using Warbyte at the mo, seems nice and to be honest not that much different to Froyo so could get used to it
Do you use Adobe PDF viewer, I used to install it from the market place but using this rom I can't see it anywhere :/
Sent from my HTC Kaiser using XDA App
Just answered my own question, needs 2.1 or above
thebaldconvict said:
Using Warbyte at the mo, seems nice and to be honest not that much different to Froyo so could get used to it
Do you use Adobe PDF viewer, I used to install it from the market place but using this rom I can't see it anywhere :/
Sent from my HTC Kaiser using XDA App
Just answered my own question, needs 2.1 or above
Click to expand...
Click to collapse
What I use for PDF's (actually works great with ms office docs too!) is OfficeSuite Pro 3.0 works great on donut and opens even docs with hyperlinks and e-sheets with formulas and graphs
Sent from my HTC Kaiser using XDA App

[Q] Best ROM for my needs?

Lets start by saying I've only rooted two phones before, ever... So I'm not a genius with this stuff. I am tech savy however, the one that everyone comes to with a computer problem or question so it shouldnt be that difficult.
This is anything and everything I need:
N64oid and FPSE to run at full speed without any stuttering in audio or video
Bluetooth to work fully (along with using a ps3 controller and using wii controllers)
GPS to work fully (I use my phone almost on a daily basis for deliveries)
Disable the track pad completely
Overclocking (pretty much a given with the emulator thing...)
I'm thinking that those are really the only couple main problems I've heard of with certain roms, somethings work some dont etc etc...
I've been looking at this thread quite a bit, downloading everything I need and organizing it in folders when the time comes. I've also heard dont root with visionary because there is a high brick rate, read also via sticky in forum.
http://forum.xda-developers.com/showthread.php?t=1107911
My main question is this the guide I should be using? Or if you suggest CM7 or Glite or whatever else... I am a very light user when it comes to pickiness. I have about 20 apps i use on a daily basis and that it, I customize the desktop picture some ringtones and use android launcher pro. Thats honestly it.
not a single response?
Ive used g-lite from virtuousrom for a while. it does everything i want and has lots of ram free for that kind of use. expect nothing fancy since its more or less a vanilla rom
Id recommend Go launcher instead of the stock launcher btw =)
Ya I was thinking glite because of its minimilistic type. Ok well thank you and ill try the other launcher out
Sent from my T-Mobile G2 using Tapatalk
G-Lite is a very fast ROM. The kernel supplied will only allow for overclocking to 1 GHz, but there is an option to install and use an alternative kernel with more overclocking possibilities. Haven't tried that yet. My experience with the standard kernel is a seriously FAST ROM that does everything smooth even when underclocked - it has by far the best battery time among all the ROMs I have used.
With regards to deactivating the trackpad completely, you will maybe have to find a third-party app or edit the keymapping files yourself.
I used unity kernel v9 with glite. It allows you to go up to 2 ghz.
As far as i know, the glite kernel allows you to do the same, but by default only goes up to 1 ghz when not using oc software. You could on the other hand edit config files for their oc daemon. Unityrom goes up to 1.2 ghz, something my phone was unable of so i had to edit those files in order to make it run without crashing.
Sent from my HTC Vision using XDA App
chriva said:
I used unity kernel v9 with glite. It allows you to go up to 2 ghz.
As far as i know, the glite kernel allows you to do the same, but by default only goes up to 1 ghz when not using oc software. You could on the other hand edit config files for their oc daemon. Unityrom goes up to 1.2 ghz, something my phone was unable of so i had to edit those files in order to make it run without crashing.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Wait, you use Unity with the most recent release of G-Lite? 2.0.1? I thought that was for sense roms only?? Does everything work?
It worked fine for me. I dont mind messing arround with my phone. perhaps i was lucky.
I trided their ICS rom for a while and used ocuvbeat to overclock up to 1.5 ghz by some voltage tweaks. Not sure if it works with GB glite. If it does, USE IT!
Btw, gettin åäö (scandinavian letters) to work is a major pita. I did it the dirty way by "stealing" the keychar and keymap folders from their unity rom. Keep in mind that typing them on the hw keyboard will make em uppercase. Not sure how to fix that.
Sent from my HTC Vision using XDA App
You know, it's easier for me to write in Chinese characters than for you Scandinavians and your special characters. You poor fellows!
My personal choice is MIUI enhanced with bulletproof addon pack from tun4f1sh.

[Q] data roaming issue on Cool Droid v3 ROM

hi all
I finally decided to give some new life to my HTC Desire, rooted it, S-OFFed it as well and after long search for most suitable ROM for me, flashed Cool Droid v3 Bravo on it.
ROM looks great and works fine, but it has only one big issue (so far) - I cannot turn on data roaming, it is turned off by default and tweaked to stay that way. As a noob, obviously I cannot post this question in specific thread about that ROM: http://forum.xda-developers.com/showthread.php?t=1279016 so I have to ask here:
is there any fix for it, an advice or procedure how to change the script (I figured out that it's just a line in build.prop file but it doesn't allows me to change it). I'm not scared to tinker with it as long as it's not too complicated and makes sense.
I need it because I live in Europe, travel a lot and I use national roaming very often.
Please if anyone can help me, because this issue is a dealbreaker for me with this ROM and I'd hate that.
Thanks in advance
PS: the screenshot shows how the setting stays no matter what option I choose
Install a rom that hasnt got a lot of Verizon stuff in it.
I would, if I can find fast, stable and reliable ROM, based on GB and preferably with Sense on it.
I'm not into flashing new ROM every few days and trying out every custom ROM out there, I just need my phone to work well within its capabilities as I travel a lot and use it for work.
I guess that this data roaming issue shouldn't be too complicated to solve, it's a piece of cake for every developer...
NoobVulgaris said:
I would, if I can find fast, stable and reliable ROM, based on GB and preferably with Sense on it.
I'm not into flashing new ROM every few days and trying out every custom ROM out there, I just need my phone to work well within its capabilities as I travel a lot and use it for work.
I guess that this data roaming issue shouldn't be too complicated to solve, it's a piece of cake for every developer...
Click to expand...
Click to collapse
Runnymede AIO v6.0.4.3 stable is probably as close as u will come.
hmm.. I'll check it out, thanks
colin_404 said:
Runnymede AIO v6.0.4.3 stable is probably as close as u will come.
Click to expand...
Click to collapse
well, I flashed this rom and been testing it last few days. It has pretty much all that I need but I find it quite heavy on my device. Too many times it slows down, lags and freezes, especially when running games and apps that need syncing. Also, quite a lot FCs. Battery drain is also significant.
I'm not sure where exactly the problem is, it just gets stuck with black screen and only notification bar is visible.
Any advice where to look at? Might it be kernel, radio or CPU issue?
thanks
A tip for ya when flashing that rom. When u first install it from recovery and reboot, when it boots past bootanimation and gets to the lockring.... Leave it settle for 15-20 mins, dont unlock. Then after 15-20 mins unlock then reboot. Then no force close, sounds mad but its true. U could try a different kernal, Droidzone has a few good 1s for sense 3.5 roms and also in settings/RCMix tweaks, u can fix permissions there, try that, it sometimes fixes force close. Im using Aurora v6 special edition, its android 2.3.5 and sense 3 and not 1 problem so far, great rom infact. Saying that, Runnymede aio s.e is my personal favourite sense 3.5 and never had any problems with it, but letting it settle for 15-20 mins is a must.
About the radio.... What do u have? Lastest is recommended.
Sent from my non - JB HTC Desire
Runnymede AIO V6.0.4.3 SE is freezing
jmcclue said:
A tip for ya when flashing that rom. When u first install it from recovery and reboot, when it boots past bootanimation and gets to the lockring.... Leave it settle for 15-20 mins, dont unlock. Then after 15-20 mins unlock then reboot. Then no force close, sounds mad but its true. U could try a different kernal, Droidzone has a few good 1s for sense 3.5 roms and also in settings/RCMix tweaks, u can fix permissions there, try that, it sometimes fixes force close. Im using Aurora v6 special edition, its android 2.3.5 and sense 3 and not 1 problem so far, great rom infact. Saying that, Runnymede aio s.e is my personal favourite sense 3.5 and never had any problems with it, but letting it settle for 15-20 mins is a must.
About the radio.... What do u have? Lastest is recommended.
Sent from my non - JB HTC Desire
Click to expand...
Click to collapse
I followed that flashing procedure pretty much, I was gentle and easy going right after flashing it, not rushing anything, left it to settle (maybe not 20 mins) and rebooted it again. Actually, FCs are not such a big issue like freezing. Usually 1fc comes on 5 freezes. My radio is 5.11.05.27, I haven't touched it since rooting the phone with Revolutionary. I kinda hesitate to flash it, I don't want to brick my device because I'm not sure about the right procedure.
As my name says, I'm just an ordinary noob, not too experienced with all this.
thanks
Did u do a full wipe before flashing.
Runnymede AIO V6.0.4.3 SE is freezing
colin_404 said:
Did u do a full wipe before flashing.
Click to expand...
Click to collapse
I did a full wipe, formatting and partitioning SD card from the scratch (fat32 partition included), 4ext is 1GB... I did all following developer's recommended procedure step by step. SD card is brand new SanDisk 8 GB, class 6.
It works well after reboot, but after a while, as soon as several apps are opened, it lags and hangs heavily, making the phone unusable.
I'm not sure does it matter, but I moved all movable apps to "phone storage", except those that have widgets that I use. Yet, the phone still freezes even when using non-movable apps.
I'd flash it again right now but I get messed up contacts list every time because not all my contacts are on google and I have 1000+ in total, so after every restore I get many duplicates and triplicates, so I'd really like a solution that doesn't include another flashing.
Here is a better tip. Don't use sense 3+ if you want reliability. I recommend cool bravo s, but change the kernel.
cronus101 said:
Here is a better tip. Don't use sense 3+ if you want reliability. I recommend cool bravo s, but change the kernel.
Click to expand...
Click to collapse
Iv no problems at all, using sense 3.0 right now, 1 of the best roms iv ever used.
Sent from my non - JB HTC Desire
jmcclue said:
Iv no problems at all, using sense 3.0 right now, 1 of the best roms iv ever used.
Sent from my non - JB HTC Desire
Click to expand...
Click to collapse
So your telling me that you have no fcs, no lags, especially when receiving a call, no battery drains? Do you use your phone? I'm not trying to be rude or anything, I really want to know, because every sense 3+ rom I had wasn't 100%. Which rom are you using right now?
Runnymede AIO V6.0.4.3 SE is freezing
cronus101 said:
So your telling me that you have no fcs, no lags, especially when receiving a call, no battery drains? Do you use your phone? I'm not trying to be rude or anything, I really want to know, because every sense 3+ rom I had wasn't 100%. Which rom are you using right now?
Click to expand...
Click to collapse
I'd like to stick with this rom.. I do have lags but not when receiving a call, that's why I suppose that I just have to do some detailed tweaking and that's where I need help as I'm not experienced with it. FCs are actually not so bad, pretty much the same as I had them on my stock froyo so I can live with that. Battery drain is there though, but I've been using the phone intensively since flashing RM AIO, trying to set it up.
Can maybe someone post here proper radio/kernel/CPU settings please?
My device is amoled version, with 5.11.05.27 radio and 2.6.35.10 [email protected] #11 kernel
CPU settings are untouched after flashing the rom, so they are "default".
thanks
cronus101 said:
So your telling me that you have no fcs, no lags, especially when receiving a call, no battery drains? Do you use your phone? I'm not trying to be rude or anything, I really want to know, because every sense 3+ rom I had wasn't 100%. Which rom are you using right now?
Click to expand...
Click to collapse
Aurora v6 special edition. No lag, no fc, battery is great, obviously its not as good as AOSP. And yes i use my phone, im using it now writing this
Sent from my non - JB HTC Desire
jmcclue said:
Aurora v6 special edition. No lag, no fc, battery is great, obviously its not as good as AOSP. And yes i use my phone, im using it now writing this
Sent from my non - JB HTC Desire
Click to expand...
Click to collapse
How long have you been using it?
Sent from my HTC ONE X
cronus101 said:
How long have you been using it?
Sent from my HTC ONE X
Click to expand...
Click to collapse
Lol not long but plan on sticking with it. Im using a Droidzone kernal, OC set to min 245 and max 998 Smartassv2 and cpu set to the same with ondemand. Like i dont play games on my phone, i just use it for phone calls msgs and internet (usuall stuff) i charged it to 100% yesterday and iv now still 53% which is pretty good going.
Sent from my non - JB HTC Desire

[Q] Are the relatively newer ROMS too heavy for Desire Z ?

Hi guys,
I have question regarding my HTC Desire Z .. Ever since I rooted the phone about 1.5 years ago, and have been trying out the newer ROMs, I've slowly realized that my phone is getting slower, slower, and slower .. I'm currently using a Jellybean ROM, and its *extremely* slow ! I mean, at times I receive a call, and the ringer rings about 5-6 times, and during all this time, the phone doesn't have the juice to switch to the phone app, so that I can 'accept' the call ! Ultimately the call disconnects itself!
A friend recently suggested to me that maybe the newer ROMs are two powerful for my phone, and that I need to move to an older Android version ROM, which my Desire Z CAN handle, without this much lag !
Also, I hardly have any apps installed on my phone at all, in an attempt to keep the load low .. I also use 'Advance Task Killer' regularly to kill background apps, but it doesn't really improve anything ..
What can I do to improve the speed of my phone !? I really pisses me off to see a 10-15 second lag when I call someone !
Get rid of the task killer first of all...
Sent from my HTC Vision using xda premium
i own desire z. installed flinnys 128 (jb) and everything works EXTREMELY smooth! no lag!!!!
just try it!
demkantor said:
Get rid of the task killer first of all...
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Task Killer is not the issue, as I only installed it the other day .. The condition was same before as well ..
d_gkal said:
i own desire z. installed flinnys 128 (jb) and everything works EXTREMELY smooth! no lag!!!!
just try it!
Click to expand...
Click to collapse
I dont think it will make any difference .. I've tried many different ROMs, and its always the same condition with all ... Sometimes my phone become *so* unresponsive that I just feel like smashing it on the ground ! (When I really get upset!)
Also, on another note, when I open Advanced Task Killer, it shows me the amount of free RAM on the top .. Most of the times this value is between 60 MB ~ 100 MB, and sometimes between 100 MB ~ 140 MB .. If never seen this value go above 135 MB or so ... And Desire Z is supposed to have 512 MB of RAM
just full wipe and reflash the rom
d_gkal said:
just full wipe and reflash the rom
Click to expand...
Click to collapse
If I do that, it will initially be fast .. Even if I install all my apps on the first day, it will still be okay in terms of speed ... But give it a week, it eventually becomes slow .. very slow! .. And the odd thing is, during this week, I don't necessary install/uninstall anything .. the phone just ****s itself in somehow ... And then from then on, it remains slow, no matter what ...
I open Google Maps, takes like 15 seconds to open .. takes another 60 seconds to go to Google Navigation, and then further lags after that ..
Basically there's a lag in *everything* !
Is there a way I can see what is slowing down the phone ?!
Also, is it true or not whether an older phone, such as Desire Z, can or cannot handle a relatively newer Android version ROM ? Maybe this is why the latest Android versions are NOT officially available for phones many times, because the manufacturer knows the device cannot handle that newer Android version ?
If your rom supports ext partitions, make sure all of yours are formatted that way. Chances are you have sopme bad apps, a logcat may hedlp determin abused wake locks or memory leaks. Also you can try downloading battery batt stats or watchdog for more infor
Sent from my HTC Vision using xda premium
ahmadka said:
Hi guys,
I have question regarding my HTC Desire Z .. Ever since I rooted the phone about 1.5 years ago, and have been trying out the newer ROMs, I've slowly realized that my phone is getting slower, slower, and slower .. I'm currently using a Jellybean ROM, and its *extremely* slow ! I mean, at times I receive a call, and the ringer rings about 5-6 times, and during all this time, the phone doesn't have the juice to switch to the phone app, so that I can 'accept' the call ! Ultimately the call disconnects itself!
A friend recently suggested to me that maybe the newer ROMs are two powerful for my phone, and that I need to move to an older Android version ROM, which my Desire Z CAN handle, without this much lag !
Also, I hardly have any apps installed on my phone at all, in an attempt to keep the load low .. I also use 'Advance Task Killer' regularly to kill background apps, but it doesn't really improve anything ..
What can I do to improve the speed of my phone !? I really pisses me off to see a 10-15 second lag when I call someone !
Click to expand...
Click to collapse
i had a play with elitemod ics the other day & it was defiantly slower than the GB version... it was using more or less double the ram which i suspect is the real problem.....
Yes its true the newer versions are more hungry. We touched on it in one of the andromadus threads recently. I believe the issue to be the cpu. The nexus s has the same amount of ram as us and although its not as good on there as the gnex, its still good. Having bumped my lower cpu limit a notch, its much better. I also tried a few upper limits and found that 1200 to be best as it suffers with animation under that.
But then all dz's are different. Stay on your rom and bump up the lower limits a few clicks and let us know what you think.
Sent from my HTC Vision using xda premium
I've noticed the slowdowns happening with negligible CPU load and no memory constraints. I suspect a problem with the kernel. At the times it happens, the phone seems to be just doing *nothing*.
demkantor said:
If your rom supports ext partitions, make sure all of yours are formatted that way. Chances are you have sopme bad apps, a logcat may hedlp determin abused wake locks or memory leaks. Also you can try downloading battery batt stats or watchdog for more infor
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
Is there any other thing I can try apart from logcat ? I installed Watchdog a few hours ago, but so far it hasn't reported anything out of the way ..
What does have ext partitions do ? How does that speed up the OS ?
Also, I'm probably going to be re-flashing another ROM soon, so please suggest me a ROM ... I'm looking for maximum longterm stability and responsiveness here, so even if a ROM isn't the newest or the most feature-filled, I can still try it out ..
And what is Superwipe (read it in another thread) ?
Normally, when I restore stuff after installing a ROM, I download a fresh copy of the app from the Store, and only restore the app's data using titanium .. is this okay ?
For the sake of starting fresh, flash the ext 4 recovery and flash mimicry as your rom. Read all suggestions in the first few post on mimicry, to flash 4ext I made a thread, you'll find it the first page or so in the general section (dzhboot or something)
Mimicry is one of the best made best performing full featured ics roms for our phones, partitioning everything to 4ext (easily done through recovery) will make it far better. Other bonus tweaks will be added in.
There (in my opinion) are beter performing gingerbread roms, but I do sugest mimicry as it is amazing and the dev has laid out a wealth of knowledge in the first few posts
Sent from my HTC Vision using xda premium
demkantor said:
For the sake of starting fresh, flash the ext 4 recovery and flash mimicry as your rom. Read all suggestions in the first few post on mimicry, to flash 4ext I made a thread, you'll find it the first page or so in the general section (dzhboot or something)
Mimicry is one of the best made best performing full featured ics roms for our phones, partitioning everything to 4ext (easily done through recovery) will make it far better. Other bonus tweaks will be added in.
There (in my opinion) are beter performing gingerbread roms, but I do sugest mimicry as it is amazing and the dev has laid out a wealth of knowledge in the first few posts
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
I'm assuming you're referring to this thread: http://www.forum.xda-developers.com/showthread.php?t=1714187
Well this is the ROM I'm currently using, which I flashed about 2 months ago, which is giving me all these performance issues ..
I went through the first few pages, but I didn't find any instructions on 4EXT ... The only thing I found was in the OP's FAQ in the start, which said that you should apply ext by downloading 4ext from Play Store, if you get lags ..
Anywhere else I can look ?
Look in general section, somewhere in the first page I posted a thread called dzhboot on g2 or something to that extent, one of the first few posts I eplain how to flash 4ext recovery.
One of the fastest roms I have used is elitemod cm7, maybe try that
Sent from my HTC Vision using xda premium
I have been wondering the same as the OP. I have been using andromadus and andromadus mimicry roms for the past few month. I tired cm9 unofficial but it was no different to mimicry in terms of lag. Currently on flinny's jb beta http://forum.xda-developers.com/showthread.php?t=2005136. Lag is not terrible but too often I am looking at a white screen waiting for something to happen.
I often experience lags opening apps like phone and browser (any browser). Phone hanging when trying to make a call is particularly annoying because my wife asks "why is your phone so ****?"
I would love to have a really smooth experience like others report but even with a fresh wipe I seem to have trouble. When I try to reduce the process limit i still seem to have too many processes running. What should i look for in logcat in terms of tracking down the problem?
Maybe 4ext will sort it out? I am very loathe to go back to a cm7 rom.
Ext4 worked really well for me to speed up my phone.. I highly recommend it.
Sent from my HTC Vision using Tapatalk 2
alexnh said:
I have been wondering the same as the OP. I have been using andromadus and andromadus mimicry roms for the past few month. I tired cm9 unofficial but it was no different to mimicry in terms of lag. Currently on flinny's jb beta http://forum.xda-developers.com/showthread.php?t=2005136. Lag is not terrible but too often I am looking at a white screen waiting for something to happen.
I often experience lags opening apps like phone and browser (any browser). Phone hanging when trying to make a call is particularly annoying because my wife asks "why is your phone so ****?"
I would love to have a really smooth experience like others report but even with a fresh wipe I seem to have trouble. When I try to reduce the process limit i still seem to have too many processes running. What should i look for in logcat in terms of tracking down the problem?
Maybe 4ext will sort it out? I am very loathe to go back to a cm7 rom.
Click to expand...
Click to collapse
It's gotta be a certain app your installing thats hogging all your memory, I been running mimicry ever since blk released it n have had very few slowdowns.
Never had a problem receiving/making calls 'wiping' is not the same as 'superwiping' its different then just the name, I suggest you do some reading up before flashing any more roms.
tarroyo said:
It's gotta be a certain app your installing thats hogging all your memory, I been running mimicry ever since blk released it n have had very few slowdowns.
Never had a problem receiving/making calls 'wiping' is not the same as 'superwiping' its different then just the name, I suggest you do some reading up before flashing any more roms.
Click to expand...
Click to collapse
i superwipe, and i've been flashing roms since the g1. I am not seeing any particular process hogging resources. this current jb beta is pretty good but still get some lagging at random.
if that were the case I would love to try and find out what it is.
it seems to me that a minority of users report lags in rom threads and are dismissed without ever really getting to the root of the problem.
I would really like to try and get to the bottom of it. I am going to move to ext4 but if there are other troubleshooting steps to take I am all ears.
Ext4 alone will make a huge difference, and most of the rest of the slow downs will be do to apps/running services which can be seen with a logcat what is continually trying to use cpu resources
If only a minority report slowdowns then either that minority has a different idea of how the phone should run/ they use the phone in a completley different way/ or have different settings and apps then most have.
Sent from my HTC Vision using xda premium

Categories

Resources