I have the Xingular 8125 (also known as Wizard), and I am happy with it. One annoying thing is that in bright sunlight with sunglasses it is impossible to see the screen. unfortunately it is also impossible to see the dial pad if you need to make a phone call. Coes anybody know of a way or perhaps a freeware program that would allow me to simply say the numbers I want to dial?
there is ms voice commander but it's not free
Thanks, but I am not really looking for a full fledged voice command system. Just something that allows me to dial vith my voice. I know that I can assign voice tags to entries in the contact list, but that doesn't help me when I need to call someone who is not in my contacts.
I use Vito Voicedial. Simple and does exactly what you want.
http://vitotechnology.com/en/products/voicedialer.html
It's no freeware. (BTW there are many cracks around to rgeister the program)
Vito is not as good as speed voice dialer and eats a ton of application memory (7mb). The registering process is device dependent and they have a limit as to how many times you can change device. It sucks.
I would like to remove voice commander and install voice speed dialer that I had on my 8125 to my TYTN...
But do not know how to find the speed phone dialer
Eric
Check out http://forum.xda-developers.com/showthread.php?t=260732
It works almost as good as the MS VC and one of the hacked versions will work for your Wizard.
WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
Hands-free phone
Dial your phone by voice using the phone number
Contact lookup
View contacts with a voice command
Have the subject, time, and location of upcoming appointments read to you
Media player
Program starter
Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
QVGA Landscape WM6 Compatibile Home Screens
thanks you
Most of time, Voice Command works fine, but those times it doesn't more than make up for the times that it does
Great job with this, it's working pretty good for me with my BT headset. Very nice!!!!
add voice tag feature is gone.
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Try a hard reset?
dluser said:
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Click to expand...
Click to collapse
Try a hard reset. That should restore it to factory settings. You'll have to input your ActiveSync settings again and install any other apps you want.
I agree. I have VC1.6 on my WM6 and I am really dissapointed with my experience. I watched that very detailed video tour of the program before it was released and it made it seem like it cooked dinner, shoveled the snow, and aced all my exams. However, I find myself constantly arguing with the stupid lady voice about her being deaf, not being able to pronounce/recognize the right way my friends are called, and just being plain dumb. I thought it would be really useful while driving, but 80% of the time I give up and press the keys away to get what I want.
No thanks!
I Love Miss Botron's Voice, Works like a Charm!
To jromney: well said, thanks guy, it works like a charm on my Dash! Now I love VC, like you said, it a powerful application. I have Miss. Botron's voice volume turned up to the max. The Girl is alright with me!(lol) We talk all the time!(lol) By the way jromney, you got the best VC bluetooth headset fix on the planet, so easy a caveman can do it! (lol) Works perfect with my Plantronics 590A bluetooth headset!
Nice Software + voice speed dial
For those of you that have problems dialing strange non English names I fod a good way of dialing. In my HTC p3300 I have a software called Voice speed dial. With it I can make a voice tags forall my contacts. Then on my BT a2dp I press the utton for voice dialing, then I say "Start Voice Speed Dial" then it turnes on the voice speed dial and I say the name "name" and then the voice speed dial recognizes it on the spot.
I works very nice.
Would anyone like to share the file for voice command or split the cost on the purchase from handango. I do miss that feature of having messages read aloud and commanding programs via voice.
???
i am pretty new to the whole voice command thing and i know that it CAN read my text message out loud, i just don't know HOW to make it happen, please help me
thanks in advance
Sick of Microsoft voice commander 1.6 problems on wm6??
Try this great alternative "Vito Voice2Go v1.51"
Just search it in ed2k or p2p search engine by:" Vito Technology Vito Voice2Go v1.51 Xscale Wm2003 Wm5 Wm6 Cracked-Sympda.zip"
Don’t forget to disable the "mwc 1.6" if you installed it earlier
And make sure you change the voice command button to "voice2go" program
Didn’t try it yet with Bluetooth headset
All the best Miteranix
wm6 voice command
i just installed this on my dash(updated to 1.33 htc rom) my home button is using to voice tag crap does anyone know how to fix it to voice command... everything about the program works it just doesnt let me use the home key to activate can anyone help?
thanks a bunch!
Hi,
I use the GSM codes alot, for exemple #21# to cancel call forwarding, etc. I find it faster than drilling down menus. When I call directly or thru the contacts manager (I made contacts for the codes), everything goes fine. If however I map the contact to the quick dial slot on the home menu OR in a quick dial slot on a cube, the phone gives me an error message. Anyone has a solution?
Also, I recently installed a profile manager with the ability to launch programs with command line parameter when certain conditions are met (I would like the phone to initiate call forwarding when the AC is plugged in), anyone know how I can initiate a call to a specific number (gsm code in my case) from the command line?
Thanks for your help
Wilgar
i seem to be having some trouble with my dash...i have the kavana win mobile 6.1 installed...and i cant seem to get the phone to read off messages or emails or tell me whose calling or anything... the bluetooth routes correctly during calls and i can use the button on the headset to activate voice prompt
i made sure the settings in voice command were all yes and route through bluetooth...is there something im missing?..
i have a cheap motorola h350
Anyone found a way to do this? Appears you can only map it to voice talk but that doesnt auto prompt for voice commands (have to either say hi galaxy or hit the button) while voice command automatically starts listening upon opening and it has a lot more features integrated. I find it does a better job that google voice search at name recognition also.