Related
WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
Hands-free phone
Dial your phone by voice using the phone number
Contact lookup
View contacts with a voice command
Have the subject, time, and location of upcoming appointments read to you
Media player
Program starter
Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
QVGA Landscape WM6 Compatibile Home Screens
thanks you
Most of time, Voice Command works fine, but those times it doesn't more than make up for the times that it does
Great job with this, it's working pretty good for me with my BT headset. Very nice!!!!
add voice tag feature is gone.
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Try a hard reset?
dluser said:
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Click to expand...
Click to collapse
Try a hard reset. That should restore it to factory settings. You'll have to input your ActiveSync settings again and install any other apps you want.
I agree. I have VC1.6 on my WM6 and I am really dissapointed with my experience. I watched that very detailed video tour of the program before it was released and it made it seem like it cooked dinner, shoveled the snow, and aced all my exams. However, I find myself constantly arguing with the stupid lady voice about her being deaf, not being able to pronounce/recognize the right way my friends are called, and just being plain dumb. I thought it would be really useful while driving, but 80% of the time I give up and press the keys away to get what I want.
No thanks!
I Love Miss Botron's Voice, Works like a Charm!
To jromney: well said, thanks guy, it works like a charm on my Dash! Now I love VC, like you said, it a powerful application. I have Miss. Botron's voice volume turned up to the max. The Girl is alright with me!(lol) We talk all the time!(lol) By the way jromney, you got the best VC bluetooth headset fix on the planet, so easy a caveman can do it! (lol) Works perfect with my Plantronics 590A bluetooth headset!
Nice Software + voice speed dial
For those of you that have problems dialing strange non English names I fod a good way of dialing. In my HTC p3300 I have a software called Voice speed dial. With it I can make a voice tags forall my contacts. Then on my BT a2dp I press the utton for voice dialing, then I say "Start Voice Speed Dial" then it turnes on the voice speed dial and I say the name "name" and then the voice speed dial recognizes it on the spot.
I works very nice.
Would anyone like to share the file for voice command or split the cost on the purchase from handango. I do miss that feature of having messages read aloud and commanding programs via voice.
???
i am pretty new to the whole voice command thing and i know that it CAN read my text message out loud, i just don't know HOW to make it happen, please help me
thanks in advance
Sick of Microsoft voice commander 1.6 problems on wm6??
Try this great alternative "Vito Voice2Go v1.51"
Just search it in ed2k or p2p search engine by:" Vito Technology Vito Voice2Go v1.51 Xscale Wm2003 Wm5 Wm6 Cracked-Sympda.zip"
Don’t forget to disable the "mwc 1.6" if you installed it earlier
And make sure you change the voice command button to "voice2go" program
Didn’t try it yet with Bluetooth headset
All the best Miteranix
wm6 voice command
i just installed this on my dash(updated to 1.33 htc rom) my home button is using to voice tag crap does anyone know how to fix it to voice command... everything about the program works it just doesnt let me use the home key to activate can anyone help?
thanks a bunch!
Any member has info as to wich rom cooked or not works with microsoft voice command mainly the notifications of messages and incomiong calls to the speakerphone ? please share your knowledge thanks in advance!
Another question might be... Does anyone know when MS is going to come out with a WM6 version of Voice Command?
Yes version 1.6 is made for WM5 and will run on WM6 but I have the same issues with all WM6 Rom's I have tried where it does not work with notifications or txt/email/phone calls.
What's odd is that it work's GREAT on the Wizard builds of WM6. I used VC on my Wizard with almost every different published ROM including more than a few of my own. It always worked flawlessly on that platform.
That is strange because for me, in WM6 I have only ever been able to get the "Voice Commands" part of the program to work.
It never reads any notifications and someone told me it will read txt and emails too but I have never found a way to make it do that either.
VC 1.6 does work with WM6, but requires patches
I apologize, I cannot put my hands on the files with directions for you. But if you search around the site, you can find the 0.9f cab file to install, and the files to update your version of VC 1.6 to v1.6.17913, which will allow all Voice Command features on the Hermes (including Bluetooth).
Dean
vp3g's 3.62 ROM
Radio 1.54.07
To read txt and e-mail is a different program
DIE_HARD said:
That is strange because for me, in WM6 I have only ever been able to get the "Voice Commands" part of the program to work.
It never reads any notifications and someone told me it will read txt and emails too but I have never found a way to make it do that either.
Click to expand...
Click to collapse
To have your phone read your e-mail to you requires a different program than Voice Command (perhaps Cyberon's Voice Commander? - I'm not sure).
Good luck!
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
Hope this works!
Thanks and I thank Google XDA search as well
EDIT:
YAY Reading notifications now! THANKS!
And I guess when they told me it reads emails they meant it reads "From" and the "Subject" that are shown in the notifications.
EDIT2:
So now why did I have to download this version here and not from Microsoft? Still kind of feel like I wasted money seeing as how I ended up using a version found on these forums.
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Voice Commander
Another thing to check once you install that update, go to settings, then voice command settings and double check your setting for notifications. The default setting "Announce notifications using bluetooth hands free only".. i change my to Announce notifications using Bluetooth hands free if available.
hope this helps.. but for me, this is holding me up a long time, unless I finally realized. Working fine for me since, with ALL ROMS i have tried.
I'm using ...
... Voice Commander on my newly upgraded UK T-Mobile Vario II with Fun_Key latest WM6 ROM.
Works great, its naturally a little faster at recognising my voice than it was on WM5.
Havent tried notifications though, i used to use it for incoming SMSs but got fed up of it announcing my T-Mobile remaining Flext credits (sms's sent automatically) every few days or so!
Stu
DIE_HARD said:
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
Hope this works!
Click to expand...
Click to collapse
lokmeup said:
Here is a MS Voice Command 1.6 and BT Patch ONLY ExtROM that I use when building my ROMs. It will install everything the exact way necessary to get announcements and BT to work without any further changes. Just install, Run, Pair your BT, Soft Reset, and have fun.
MSVoiceCommand1.6_and _BTpatch_ExtROM.zip
http://www.sendspace.com/file/3xqdnc
If you only wanted the CABs...
MSVoiceCommand1.6_and _BTpatch_CABs.zip
http://www.sendspace.com/file/bq815x
Ron
Click to expand...
Click to collapse
Thanks both of you, DIE_HARD and lokmeup.
Those worked perfectly except only when I pushed left side button of my head set(Jabra BT620s).
Is there any body who have same problem as mine?
don,t care for bluetooth which one patches so that i can have the annoucements routed to the speakerphone when i recieve a text or incoming call or email ?
leoiden said:
don,t care for bluetooth which one patches so that i can have the annoucements routed to the speakerphone when i recieve a text or incoming call or email ?
Click to expand...
Click to collapse
Use it, it works the way your asking....
http://forum.xda-developers.com/showpost.php?p=1499174&postcount=13
I downloaded and installed this. Turned the phone off and then back on.
But now my 8525 locks up whenever I slide out the keyboad. Help?!?
I'm running the WM6 provided by Cingular/HTC
Do I need to actually install Voice Commander 1.6 THEN install the above?
Either way, I'm guessing my 8525 now needs a hard reset
Hi,
I have the BT HTC S620 on RickyWatts 6.1 ROM
I used to be able to use ms voice command which seemed to be built in..
but then it stopped working and now when i hold down home (voice command key) it beeps at me before saying "there is no trained voice tag"
anyone have this problem or know how to fix it?
Sorry if this has already been posted...search doesnt seem to be working...
Thanks,
Matt
when you installed 6.1 you didnt pick Microsoft VC. You picked cyberon Voice Command.
"Difference between these two kinds of voice command is that Cyberon voice uses voice-tags that you record, whereas ms voice command doesn't need you to record voice tags(but spoken language only support English"
look for VCSwitch.ccs in your phones \windows folder. Run it with Resco Explorer. That will enable Microsoft Voice Command.
....stupid thing wont work...
i got this screen when i first booted my device in this ROM
It doesnt let me scroll down to select MS Voice Command
mat157 said:
i got this screen when i first booted my device in this ROM
It doesnt let me scroll down to select MS Voice Command
Click to expand...
Click to collapse
Can you click right and it moves down?
Fixed!
Tanks
It tricked me by getting me to press the completely wrong button to move down
Thats Done, Problem is now it opens notes when i press voice command....but ill have a play around...i think i saw a setting that changes that
Thanks for the help!
mat157 said:
Tanks
It tricked me by getting me to press the completely wrong button to move down
Thats Done, Problem is now it opens notes when i press voice command....but ill have a play around...i think i saw a setting that changes that
Thanks for the help!
Click to expand...
Click to collapse
That's cool had exactly the same problem when first flashed, i don't use voice command but sure someone else will be more than happy to help
Fixed Again
Yeh to solve the notes problem i disabled JOGGR
which i had enabled while trying to get Voice Command working.
Thanks for the help!
Mikey1022 said:
when you installed 6.1 you didnt pick Microsoft VC. You picked cyberon Voice Command.
"Difference between these two kinds of voice command is that Cyberon voice uses voice-tags that you record, whereas ms voice command doesn't need you to record voice tags(but spoken language only support English"
look for VCSwitch.ccs in your phones \windows folder. Run it with Resco Explorer. That will enable Microsoft Voice Command.
Click to expand...
Click to collapse
Ummmm Its not working for me.. my whole OS is a mess.. I cant even see the people that call me.. When I assign a picture to them. it comes out all distorted.
shadytree00 said:
Ummmm Its not working for me.. my whole OS is a mess.. I cant even see the people that call me.. When I assign a picture to them. it comes out all distorted.
Click to expand...
Click to collapse
If I was you I'de hard reset and start over.
Voice Announcements
I have a question about Voice command and annoumcements. Before I updated to to rickywatts 6.1 I use to get announcements for everything. New text message and whom it was from would be read to me, email headers and whom they were from. Even incoming calls would be announced. Well with the new 6.1, I only get the first one announced after a reboot and nothing after that. I have to reboot again if I want to hear another one. Any ideas on why this is happening. Not just with rickywatts version. I first had kavanas and the same thing would happen. Any help would be appreciated.
Thanks,
rrgongora said:
I have a question about Voice command and annoumcements. Before I updated to to rickywatts 6.1 I use to get announcements for everything. New text message and whom it was from would be read to me, email headers and whom they were from. Even incoming calls would be announced. Well with the new 6.1, I only get the first one announced after a reboot and nothing after that. I have to reboot again if I want to hear another one. Any ideas on why this is happening. Not just with rickywatts version. I first had kavanas and the same thing would happen. Any help would be appreciated.
Thanks,
Click to expand...
Click to collapse
did you check your setting on voice command?, what is your announcement routing? are announcements set to always or to free time only? etc.
My Voice Command settings
Yes....I think the setting are set correctly...forgot to mention those..sorry.
Voice enabled - yes
Voice button - record
Availability - Always available
Announcment Routing - bluetooth only
Announcements - Always
Call confirmations - yes
Announce Calls - yes
Announce Messaging - yes
Calendar Reminders - yes
Media Selections - yes
I believe that's all of them unless I'm missing something.
rrgongora said:
Yes....I think the setting are set correctly...forgot to mention those..sorry.
Voice enabled - yes
Voice button - record
Availability - Always available
Announcment Routing - bluetooth only
Announcements - Always
Call confirmations - yes
Announce Calls - yes
Announce Messaging - yes
Calendar Reminders - yes
Media Selections - yes
I believe that's all of them unless I'm missing something.
Click to expand...
Click to collapse
If you have announcement routing set to bluetooth only, you wont hear them unless you're wearing a bluetooth headset , and you'll hear it thru your head set. You should try bluetooth if available instead for the routing and see if that works.
I have tried the other routing choices just to see if it would make a difference, but it did not. I always have my bluetooth on at work. My hands are usually in the middle of a project when someone would call or my emails and text's arrive....so with the bluetooth on, I was able to hear who was calling or what the text or email was about without having to stop what I was doing and remove my phone from it's pouch to take a look. That was with T-Mobile's WM6.0. I don't want to return to that....I love 6.1 enough to learn to live without voice announce, but if someone knows what is conflicting with it...all the better. It might be that the whole bluetooth software(or whatever it may be called) isn't right at all. When a phone call comes in, I should only hear it ringing in my bluetooth....right? Well, sometimes, not all the time, I hear it coming from the phone too. Same with text and email alerts. When I have the bluetooth on, the alerts should only be heard through the bluetooth, but same problem. I don't know.....what's next? Anyone....?
Works without BT
Well...I tried the voice announce without the bluetooth and it works just fine everytime without fail....something new must be wrong with my bluetooth headset because this was not happening in WM6.0....don't know what to next.
thanks,
Hello!
I have a big question. Is there a program for Windows Mobile, that would enable me to dial using bluetooth headset on X1 the way I could on non-wm phones (e.g. S60)?
I've tried Voice Command, but pronouncing non-english names and surnames just did't work. Vito Voice2Go and VoiceDial did't seem to recognise my HBH-PV702, as nothing happened if I pressed the button.
Is there some other software that I could try?
Thanks.
Use Voice Command andt give your contacs "Nick names" ounder the contacs name expanned menu.
Then you can pronouncing the "Nick Name" and not the real name.Works great for me.
Hello,
Probably a lot of person is trying to have microsoft voice command working with cooked ROM.
I am using eneryROM and I can t make it work.
I was wondering if theire is other application that do the same as VC ?
The primary feature I am using is
Announce who is calling on my bluetooth headset
email and sms voice on the bluetooth.
Does someone know a similar application ?( or even better have a way to make VC work with my HTC TOUCH PRO2 )