WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
Hands-free phone
Dial your phone by voice using the phone number
Contact lookup
View contacts with a voice command
Have the subject, time, and location of upcoming appointments read to you
Media player
Program starter
Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
QVGA Landscape WM6 Compatibile Home Screens
thanks you
Most of time, Voice Command works fine, but those times it doesn't more than make up for the times that it does
Great job with this, it's working pretty good for me with my BT headset. Very nice!!!!
add voice tag feature is gone.
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Try a hard reset?
dluser said:
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Click to expand...
Click to collapse
Try a hard reset. That should restore it to factory settings. You'll have to input your ActiveSync settings again and install any other apps you want.
I agree. I have VC1.6 on my WM6 and I am really dissapointed with my experience. I watched that very detailed video tour of the program before it was released and it made it seem like it cooked dinner, shoveled the snow, and aced all my exams. However, I find myself constantly arguing with the stupid lady voice about her being deaf, not being able to pronounce/recognize the right way my friends are called, and just being plain dumb. I thought it would be really useful while driving, but 80% of the time I give up and press the keys away to get what I want.
No thanks!
I Love Miss Botron's Voice, Works like a Charm!
To jromney: well said, thanks guy, it works like a charm on my Dash! Now I love VC, like you said, it a powerful application. I have Miss. Botron's voice volume turned up to the max. The Girl is alright with me!(lol) We talk all the time!(lol) By the way jromney, you got the best VC bluetooth headset fix on the planet, so easy a caveman can do it! (lol) Works perfect with my Plantronics 590A bluetooth headset!
Nice Software + voice speed dial
For those of you that have problems dialing strange non English names I fod a good way of dialing. In my HTC p3300 I have a software called Voice speed dial. With it I can make a voice tags forall my contacts. Then on my BT a2dp I press the utton for voice dialing, then I say "Start Voice Speed Dial" then it turnes on the voice speed dial and I say the name "name" and then the voice speed dial recognizes it on the spot.
I works very nice.
Would anyone like to share the file for voice command or split the cost on the purchase from handango. I do miss that feature of having messages read aloud and commanding programs via voice.
???
i am pretty new to the whole voice command thing and i know that it CAN read my text message out loud, i just don't know HOW to make it happen, please help me
thanks in advance
Sick of Microsoft voice commander 1.6 problems on wm6??
Try this great alternative "Vito Voice2Go v1.51"
Just search it in ed2k or p2p search engine by:" Vito Technology Vito Voice2Go v1.51 Xscale Wm2003 Wm5 Wm6 Cracked-Sympda.zip"
Don’t forget to disable the "mwc 1.6" if you installed it earlier
And make sure you change the voice command button to "voice2go" program
Didn’t try it yet with Bluetooth headset
All the best Miteranix
wm6 voice command
i just installed this on my dash(updated to 1.33 htc rom) my home button is using to voice tag crap does anyone know how to fix it to voice command... everything about the program works it just doesnt let me use the home key to activate can anyone help?
thanks a bunch!
Related
Hello,
I recently bought the g-smart i128.
The device comes with the Cyberon Voice Commander which i found very complicate to use.
I have install the Cyberon Voice Dial on top.
The funny part is the using my SE HBH-PV705 BT handset, when i press the connect button it just launches the commander or (after tweaking) its just connects the audio BT profile nad the ppc displays the dial pad.
I need the Cyberon Voice Dial to be launched by pressing the BT key NOT the Cyberon Voice Commander.
Running the sddialer.exe from the g-smart, works. Launching it from the BT doesn't.
Can anyone help ?
Thanks
Cyberon Voice Dial Instead of Cyberon Voice Commander
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
s200 said:
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
Click to expand...
Click to collapse
Hello Fernando - I have tried that, but then, when i press my connect button on the BT, it opens the audio channel with the phone and it displays the dial pad.
I installed MS Voice Dialling and it works better. still i would prefer the Cyberon Voice dial...
just wondering
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
wm1 said:
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
Click to expand...
Click to collapse
The MS Voice dial works fine after deleting the sddemon.exe from STARTUP directory.
My wish is to have the Cyberon Voice Dial to work and not MS Voice Dial or the Cyberon Voice Comander.
Any other suggestions please ?
Why do you prefer the Cyberon voice dial?
Thanks
ebadger said:
Why do you prefer the Cyberon voice dial?
Thanks
Click to expand...
Click to collapse
I dont, but i cant make the Voice Commander to work. I wish i had Voice Dialing working, but its not...
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
flykthewiz said:
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
Click to expand...
Click to collapse
PM me your email and i'll send it!
geovass said:
PM me your email and i'll send it!
Click to expand...
Click to collapse
done as requested
voice dialer vs. voice commander
when I upgraded my apache to wm6 I lost voice dialer. Found voice commander but it gets it wrong more than right, even with voice tags added. never had a problem with voice dialer, so when I saw a cab for voice dialer, I installed. weird thing, though, is while voice dialer showed up in the settings and I could add tags to my contacts, I could not find the program to actually use it. Can anyone help?!
As the title says... is Cyberon Voice Commander the same as Microsoft Voice Commander? ie, is it just rebadged?
The Dopod roms come with Cyberon Voice Commander, I want to know if I should consider removing it and installing Microsoft Voice Commander.
Anyone?
No, they're totally different. It makes me laugh because Microsoft's program is call Voice Command, and this is called Voice Commander.
In that case which one is better? (objective question I know but hopefully there is a consensus on this)
Ok, I installed MS Voice Command and it isn't working properly on my BlueAnt headset. When I hit the button on the headset it start Voice Command however the audio from Voice Command comes through the handset speaker and the audio is picked up from the handset too (rather than the bluetooth headset). Once I initiate the phone call it comes through on the bluetooth headset fine.
Any ideas? I checked the settings for Voice Command and it is set to go through the headset.
I have tried both the Cyberon and Microsoft products and neither work that well for my Aussie accent!
I've ditched them both for Cyberon Voice Speed Dial.
I'm using Mechle's O2 Premium ROM with the included Voice Dial software. I just tried MS Voice Command 1.6 to compare, and I didn't like it. After uninstall, my voice tags were removed and my BT car Kit no longer works correctly. I tried to delete the device and add it again but it's still not working correctly.
I'm using the BT Parrot kit, and now when I push the talk button, it just opens the phone dialer, instead of Voice Dialer, and mutes the radio. I believe it's just a registry change, but don't know what to look for. Can someone point me right direction to fix this?
Also, I can't activate Voice Dialer from the wired headset. Just redial with double press.
Hard reset always fixes the problem.
Hi,
I have the BT HTC S620 on RickyWatts 6.1 ROM
I used to be able to use ms voice command which seemed to be built in..
but then it stopped working and now when i hold down home (voice command key) it beeps at me before saying "there is no trained voice tag"
anyone have this problem or know how to fix it?
Sorry if this has already been posted...search doesnt seem to be working...
Thanks,
Matt
when you installed 6.1 you didnt pick Microsoft VC. You picked cyberon Voice Command.
"Difference between these two kinds of voice command is that Cyberon voice uses voice-tags that you record, whereas ms voice command doesn't need you to record voice tags(but spoken language only support English"
look for VCSwitch.ccs in your phones \windows folder. Run it with Resco Explorer. That will enable Microsoft Voice Command.
....stupid thing wont work...
i got this screen when i first booted my device in this ROM
It doesnt let me scroll down to select MS Voice Command
mat157 said:
i got this screen when i first booted my device in this ROM
It doesnt let me scroll down to select MS Voice Command
Click to expand...
Click to collapse
Can you click right and it moves down?
Fixed!
Tanks
It tricked me by getting me to press the completely wrong button to move down
Thats Done, Problem is now it opens notes when i press voice command....but ill have a play around...i think i saw a setting that changes that
Thanks for the help!
mat157 said:
Tanks
It tricked me by getting me to press the completely wrong button to move down
Thats Done, Problem is now it opens notes when i press voice command....but ill have a play around...i think i saw a setting that changes that
Thanks for the help!
Click to expand...
Click to collapse
That's cool had exactly the same problem when first flashed, i don't use voice command but sure someone else will be more than happy to help
Fixed Again
Yeh to solve the notes problem i disabled JOGGR
which i had enabled while trying to get Voice Command working.
Thanks for the help!
Mikey1022 said:
when you installed 6.1 you didnt pick Microsoft VC. You picked cyberon Voice Command.
"Difference between these two kinds of voice command is that Cyberon voice uses voice-tags that you record, whereas ms voice command doesn't need you to record voice tags(but spoken language only support English"
look for VCSwitch.ccs in your phones \windows folder. Run it with Resco Explorer. That will enable Microsoft Voice Command.
Click to expand...
Click to collapse
Ummmm Its not working for me.. my whole OS is a mess.. I cant even see the people that call me.. When I assign a picture to them. it comes out all distorted.
shadytree00 said:
Ummmm Its not working for me.. my whole OS is a mess.. I cant even see the people that call me.. When I assign a picture to them. it comes out all distorted.
Click to expand...
Click to collapse
If I was you I'de hard reset and start over.
Voice Announcements
I have a question about Voice command and annoumcements. Before I updated to to rickywatts 6.1 I use to get announcements for everything. New text message and whom it was from would be read to me, email headers and whom they were from. Even incoming calls would be announced. Well with the new 6.1, I only get the first one announced after a reboot and nothing after that. I have to reboot again if I want to hear another one. Any ideas on why this is happening. Not just with rickywatts version. I first had kavanas and the same thing would happen. Any help would be appreciated.
Thanks,
rrgongora said:
I have a question about Voice command and annoumcements. Before I updated to to rickywatts 6.1 I use to get announcements for everything. New text message and whom it was from would be read to me, email headers and whom they were from. Even incoming calls would be announced. Well with the new 6.1, I only get the first one announced after a reboot and nothing after that. I have to reboot again if I want to hear another one. Any ideas on why this is happening. Not just with rickywatts version. I first had kavanas and the same thing would happen. Any help would be appreciated.
Thanks,
Click to expand...
Click to collapse
did you check your setting on voice command?, what is your announcement routing? are announcements set to always or to free time only? etc.
My Voice Command settings
Yes....I think the setting are set correctly...forgot to mention those..sorry.
Voice enabled - yes
Voice button - record
Availability - Always available
Announcment Routing - bluetooth only
Announcements - Always
Call confirmations - yes
Announce Calls - yes
Announce Messaging - yes
Calendar Reminders - yes
Media Selections - yes
I believe that's all of them unless I'm missing something.
rrgongora said:
Yes....I think the setting are set correctly...forgot to mention those..sorry.
Voice enabled - yes
Voice button - record
Availability - Always available
Announcment Routing - bluetooth only
Announcements - Always
Call confirmations - yes
Announce Calls - yes
Announce Messaging - yes
Calendar Reminders - yes
Media Selections - yes
I believe that's all of them unless I'm missing something.
Click to expand...
Click to collapse
If you have announcement routing set to bluetooth only, you wont hear them unless you're wearing a bluetooth headset , and you'll hear it thru your head set. You should try bluetooth if available instead for the routing and see if that works.
I have tried the other routing choices just to see if it would make a difference, but it did not. I always have my bluetooth on at work. My hands are usually in the middle of a project when someone would call or my emails and text's arrive....so with the bluetooth on, I was able to hear who was calling or what the text or email was about without having to stop what I was doing and remove my phone from it's pouch to take a look. That was with T-Mobile's WM6.0. I don't want to return to that....I love 6.1 enough to learn to live without voice announce, but if someone knows what is conflicting with it...all the better. It might be that the whole bluetooth software(or whatever it may be called) isn't right at all. When a phone call comes in, I should only hear it ringing in my bluetooth....right? Well, sometimes, not all the time, I hear it coming from the phone too. Same with text and email alerts. When I have the bluetooth on, the alerts should only be heard through the bluetooth, but same problem. I don't know.....what's next? Anyone....?
Works without BT
Well...I tried the voice announce without the bluetooth and it works just fine everytime without fail....something new must be wrong with my bluetooth headset because this was not happening in WM6.0....don't know what to next.
thanks,
Hello!
I have a big question. Is there a program for Windows Mobile, that would enable me to dial using bluetooth headset on X1 the way I could on non-wm phones (e.g. S60)?
I've tried Voice Command, but pronouncing non-english names and surnames just did't work. Vito Voice2Go and VoiceDial did't seem to recognise my HBH-PV702, as nothing happened if I pressed the button.
Is there some other software that I could try?
Thanks.
Use Voice Command andt give your contacs "Nick names" ounder the contacs name expanned menu.
Then you can pronouncing the "Nick Name" and not the real name.Works great for me.