As the title says... is Cyberon Voice Commander the same as Microsoft Voice Commander? ie, is it just rebadged?
The Dopod roms come with Cyberon Voice Commander, I want to know if I should consider removing it and installing Microsoft Voice Commander.
Anyone?
No, they're totally different. It makes me laugh because Microsoft's program is call Voice Command, and this is called Voice Commander.
In that case which one is better? (objective question I know but hopefully there is a consensus on this)
Ok, I installed MS Voice Command and it isn't working properly on my BlueAnt headset. When I hit the button on the headset it start Voice Command however the audio from Voice Command comes through the handset speaker and the audio is picked up from the handset too (rather than the bluetooth headset). Once I initiate the phone call it comes through on the bluetooth headset fine.
Any ideas? I checked the settings for Voice Command and it is set to go through the headset.
I have tried both the Cyberon and Microsoft products and neither work that well for my Aussie accent!
I've ditched them both for Cyberon Voice Speed Dial.
Related
Hello,
I recently bought the g-smart i128.
The device comes with the Cyberon Voice Commander which i found very complicate to use.
I have install the Cyberon Voice Dial on top.
The funny part is the using my SE HBH-PV705 BT handset, when i press the connect button it just launches the commander or (after tweaking) its just connects the audio BT profile nad the ppc displays the dial pad.
I need the Cyberon Voice Dial to be launched by pressing the BT key NOT the Cyberon Voice Commander.
Running the sddialer.exe from the g-smart, works. Launching it from the BT doesn't.
Can anyone help ?
Thanks
Cyberon Voice Dial Instead of Cyberon Voice Commander
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
s200 said:
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
Click to expand...
Click to collapse
Hello Fernando - I have tried that, but then, when i press my connect button on the BT, it opens the audio channel with the phone and it displays the dial pad.
I installed MS Voice Dialling and it works better. still i would prefer the Cyberon Voice dial...
just wondering
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
wm1 said:
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
Click to expand...
Click to collapse
The MS Voice dial works fine after deleting the sddemon.exe from STARTUP directory.
My wish is to have the Cyberon Voice Dial to work and not MS Voice Dial or the Cyberon Voice Comander.
Any other suggestions please ?
Why do you prefer the Cyberon voice dial?
Thanks
ebadger said:
Why do you prefer the Cyberon voice dial?
Thanks
Click to expand...
Click to collapse
I dont, but i cant make the Voice Commander to work. I wish i had Voice Dialing working, but its not...
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
flykthewiz said:
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
Click to expand...
Click to collapse
PM me your email and i'll send it!
geovass said:
PM me your email and i'll send it!
Click to expand...
Click to collapse
done as requested
voice dialer vs. voice commander
when I upgraded my apache to wm6 I lost voice dialer. Found voice commander but it gets it wrong more than right, even with voice tags added. never had a problem with voice dialer, so when I saw a cab for voice dialer, I installed. weird thing, though, is while voice dialer showed up in the settings and I could add tags to my contacts, I could not find the program to actually use it. Can anyone help?!
I want to find out if when using a bluetooth headset with voice commander can you hear the name confirmation through the headset. I just got a Trinity and am very disapointed that when I use voice commander I can only hear the name confirmation from the unit speaker not the headset.
WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
Hands-free phone
Dial your phone by voice using the phone number
Contact lookup
View contacts with a voice command
Have the subject, time, and location of upcoming appointments read to you
Media player
Program starter
Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
QVGA Landscape WM6 Compatibile Home Screens
thanks you
Most of time, Voice Command works fine, but those times it doesn't more than make up for the times that it does
Great job with this, it's working pretty good for me with my BT headset. Very nice!!!!
add voice tag feature is gone.
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Try a hard reset?
dluser said:
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Click to expand...
Click to collapse
Try a hard reset. That should restore it to factory settings. You'll have to input your ActiveSync settings again and install any other apps you want.
I agree. I have VC1.6 on my WM6 and I am really dissapointed with my experience. I watched that very detailed video tour of the program before it was released and it made it seem like it cooked dinner, shoveled the snow, and aced all my exams. However, I find myself constantly arguing with the stupid lady voice about her being deaf, not being able to pronounce/recognize the right way my friends are called, and just being plain dumb. I thought it would be really useful while driving, but 80% of the time I give up and press the keys away to get what I want.
No thanks!
I Love Miss Botron's Voice, Works like a Charm!
To jromney: well said, thanks guy, it works like a charm on my Dash! Now I love VC, like you said, it a powerful application. I have Miss. Botron's voice volume turned up to the max. The Girl is alright with me!(lol) We talk all the time!(lol) By the way jromney, you got the best VC bluetooth headset fix on the planet, so easy a caveman can do it! (lol) Works perfect with my Plantronics 590A bluetooth headset!
Nice Software + voice speed dial
For those of you that have problems dialing strange non English names I fod a good way of dialing. In my HTC p3300 I have a software called Voice speed dial. With it I can make a voice tags forall my contacts. Then on my BT a2dp I press the utton for voice dialing, then I say "Start Voice Speed Dial" then it turnes on the voice speed dial and I say the name "name" and then the voice speed dial recognizes it on the spot.
I works very nice.
Would anyone like to share the file for voice command or split the cost on the purchase from handango. I do miss that feature of having messages read aloud and commanding programs via voice.
???
i am pretty new to the whole voice command thing and i know that it CAN read my text message out loud, i just don't know HOW to make it happen, please help me
thanks in advance
Sick of Microsoft voice commander 1.6 problems on wm6??
Try this great alternative "Vito Voice2Go v1.51"
Just search it in ed2k or p2p search engine by:" Vito Technology Vito Voice2Go v1.51 Xscale Wm2003 Wm5 Wm6 Cracked-Sympda.zip"
Don’t forget to disable the "mwc 1.6" if you installed it earlier
And make sure you change the voice command button to "voice2go" program
Didn’t try it yet with Bluetooth headset
All the best Miteranix
wm6 voice command
i just installed this on my dash(updated to 1.33 htc rom) my home button is using to voice tag crap does anyone know how to fix it to voice command... everything about the program works it just doesnt let me use the home key to activate can anyone help?
thanks a bunch!
Hello!
I have a big question. Is there a program for Windows Mobile, that would enable me to dial using bluetooth headset on X1 the way I could on non-wm phones (e.g. S60)?
I've tried Voice Command, but pronouncing non-english names and surnames just did't work. Vito Voice2Go and VoiceDial did't seem to recognise my HBH-PV702, as nothing happened if I pressed the button.
Is there some other software that I could try?
Thanks.
Use Voice Command andt give your contacs "Nick names" ounder the contacs name expanned menu.
Then you can pronouncing the "Nick Name" and not the real name.Works great for me.
I need an app to call my contacts while driving; google voice (online) is too slow and the offline version still doesn't exist in italian for the calling commands. I'm testing Cyberon but although I can hear it very well through the car's loudspeakers it doesn't understand my commands.
Any suggestion and/or what do you use for the same goal ?