I have the Xingular 8125 (also known as Wizard), and I am happy with it. One annoying thing is that in bright sunlight with sunglasses it is impossible to see the screen. unfortunately it is also impossible to see the dial pad if you need to make a phone call. Coes anybody know of a way or perhaps a freeware program that would allow me to simply say the numbers I want to dial?
there is ms voice commander but it's not free
Thanks, but I am not really looking for a full fledged voice command system. Just something that allows me to dial vith my voice. I know that I can assign voice tags to entries in the contact list, but that doesn't help me when I need to call someone who is not in my contacts.
I use Vito Voicedial. Simple and does exactly what you want.
http://vitotechnology.com/en/products/voicedialer.html
It's no freeware. (BTW there are many cracks around to rgeister the program)
Vito is not as good as speed voice dialer and eats a ton of application memory (7mb). The registering process is device dependent and they have a limit as to how many times you can change device. It sucks.
I would like to remove voice commander and install voice speed dialer that I had on my 8125 to my TYTN...
But do not know how to find the speed phone dialer
Eric
Check out http://forum.xda-developers.com/showthread.php?t=260732
It works almost as good as the MS VC and one of the hacked versions will work for your Wizard.
Related
I saw a review of ETEN M600 in a (italian) magazine: there was a photo showing the wm5-integrated voice command...the problem is: why does my qtek 9000 only have voice speed dial (to call contacts or launch apps) and the lower-class m600 has a full featured program, that can also - as clearly shown in the photo that struck me - read sms (!!), call telephone numbers even if not stored in the contacts database, and many many more interesting actions??
is there a way to extract it and use it on Universal?? I'd really like to have sms read to me (useful while driving), and the radio/bt/wifi turned on and off without having to open it, turn it on and click click click... it takes no more than 10 seconds but sometimes it's annoying!!
any hints about that?? any suggestion??
Isn't this just Voice Command? Why not just install Voice Command to allow you to execute commands like radio on/off etc?
V
MS voice command 1.5 you mean?? but as far as I remember (It's been a long time since I last used it on my old PDA) it can't read sms or so....
It can if you know how :wink:
However, out of the box I don't know if it can.
V
I don't understand...you mean that there's a way to have it reading out loud all my text messages?? oh man that would be great!! are you talking seriously or is it just a technical fantasy?? tell me I'm so curious!!!
vijay555 said:
It can if you know how :wink:
However, out of the box I don't know if it can.
V
Click to expand...
Click to collapse
Hmm! ;-)
Vijay555, do you mean there's a way to discover some more hidden capabilities in Microsoft Voice Command 1.5 UK?
I really would love to have some more functions in this. Don't see any upgrades coming at moment.
I don't know about hidden capabilities in Voice Command itself.
But there are other ways to make the Phone speak and there are a couple of competing speech engines out there.
I'm currently working on a speech program, VJLoquitur, using Flite and some other stuff.
Anyone going to the Modaco meeting this Saturday? I'll be showing it off there, hopefully.
V
Hello,
I recently bought the g-smart i128.
The device comes with the Cyberon Voice Commander which i found very complicate to use.
I have install the Cyberon Voice Dial on top.
The funny part is the using my SE HBH-PV705 BT handset, when i press the connect button it just launches the commander or (after tweaking) its just connects the audio BT profile nad the ppc displays the dial pad.
I need the Cyberon Voice Dial to be launched by pressing the BT key NOT the Cyberon Voice Commander.
Running the sddialer.exe from the g-smart, works. Launching it from the BT doesn't.
Can anyone help ?
Thanks
Cyberon Voice Dial Instead of Cyberon Voice Commander
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
s200 said:
Hi,
Try the following. Rename the voice dial file (I don´t remenber the name, I think is Sddialer.exe or something like that) to voicecommander.exe. There will be an pop up alert saying that you are goint to overwrite a rom file, it doesn´matter you overwrite it.
Now it will be work.
Good luck
Fernando
Click to expand...
Click to collapse
Hello Fernando - I have tried that, but then, when i press my connect button on the BT, it opens the audio channel with the phone and it displays the dial pad.
I installed MS Voice Dialling and it works better. still i would prefer the Cyberon Voice dial...
just wondering
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
wm1 said:
I know that When I installed MS Voice Command I had to reassign the button under settings. Once I reassigned the button from Voice Dialer to Voice Command it worked fine. Did you try that?
Click to expand...
Click to collapse
The MS Voice dial works fine after deleting the sddemon.exe from STARTUP directory.
My wish is to have the Cyberon Voice Dial to work and not MS Voice Dial or the Cyberon Voice Comander.
Any other suggestions please ?
Why do you prefer the Cyberon voice dial?
Thanks
ebadger said:
Why do you prefer the Cyberon voice dial?
Thanks
Click to expand...
Click to collapse
I dont, but i cant make the Voice Commander to work. I wish i had Voice Dialing working, but its not...
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
flykthewiz said:
I do prefer Voice Dialer to Voice Commander. It is just easy and works and dials who i ask it to (I don't care that I have to record my own tags) VCmd, MS Voice Command et al are all simply too complex and get it wrong too often in the car, which is where I need voice dialling!!!!
Unfortunately I have lost Voice Dialer since flashing my orange m600 with a dopod ROM, so can you tell me where you got the install program as I cant find it
Thanks
Click to expand...
Click to collapse
PM me your email and i'll send it!
geovass said:
PM me your email and i'll send it!
Click to expand...
Click to collapse
done as requested
voice dialer vs. voice commander
when I upgraded my apache to wm6 I lost voice dialer. Found voice commander but it gets it wrong more than right, even with voice tags added. never had a problem with voice dialer, so when I saw a cab for voice dialer, I installed. weird thing, though, is while voice dialer showed up in the settings and I could add tags to my contacts, I could not find the program to actually use it. Can anyone help?!
WM6 Voice Command 1.6
Voice Command is a very powerful program that will allow you to control your WM6 Excalibur with your voice.
Hands-free phone
Dial your phone by voice using the phone number
Contact lookup
View contacts with a voice command
Have the subject, time, and location of upcoming appointments read to you
Media player
Program starter
Device Status
Enable Voice Command
Start > Voice Command
Voice Enabled > Yes
Announcement Routing > Bluetooth if Available
This setting will allow Voice Command to use the Excalibur phone speaker to respond to vocal commands, if you don't have a bluetooth headset connected.
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the soft reset, press and hold the home key. This is the default Record Application Button which activates Voice Command. When you hear the beep say, "Help". Voice command will then guide you through the available voice commands.
IMPORTANT: Do not talk directly into the microphone. Hold the phone 4 inches/100mm from your voice. The response from Voice Command will take a few seconds.
A Voice Command tutorial from Microsoft is here.
Enable Voice Command with a Bluetooth Headset
With the current beta release of WM6, you need to modify the following registry settings to use your bluetooth headset with this feature.
NOTE: Your Excalibur has to be application unlocked to make modifications to the registry.
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule
The string value needs to be changed from "OEMAGW.dll" to "\Windows\vcbthag.dll".
IMPORTANT: Soft Reset to enable the changes to Voice Command
After the phone reboots, your bluetooth headset will now be able to use Voice Command by pressing the button on your headset. Wait for the beep, then speak the command.
Viel Spaß mit Voice Command,
jromney
QVGA Landscape WM6 Compatibile Home Screens
thanks you
Most of time, Voice Command works fine, but those times it doesn't more than make up for the times that it does
Great job with this, it's working pretty good for me with my BT headset. Very nice!!!!
add voice tag feature is gone.
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Try a hard reset?
dluser said:
I tried voice command 1.6 did not like it and now my dash has no add voice tag feature. How do I get it back?
Click to expand...
Click to collapse
Try a hard reset. That should restore it to factory settings. You'll have to input your ActiveSync settings again and install any other apps you want.
I agree. I have VC1.6 on my WM6 and I am really dissapointed with my experience. I watched that very detailed video tour of the program before it was released and it made it seem like it cooked dinner, shoveled the snow, and aced all my exams. However, I find myself constantly arguing with the stupid lady voice about her being deaf, not being able to pronounce/recognize the right way my friends are called, and just being plain dumb. I thought it would be really useful while driving, but 80% of the time I give up and press the keys away to get what I want.
No thanks!
I Love Miss Botron's Voice, Works like a Charm!
To jromney: well said, thanks guy, it works like a charm on my Dash! Now I love VC, like you said, it a powerful application. I have Miss. Botron's voice volume turned up to the max. The Girl is alright with me!(lol) We talk all the time!(lol) By the way jromney, you got the best VC bluetooth headset fix on the planet, so easy a caveman can do it! (lol) Works perfect with my Plantronics 590A bluetooth headset!
Nice Software + voice speed dial
For those of you that have problems dialing strange non English names I fod a good way of dialing. In my HTC p3300 I have a software called Voice speed dial. With it I can make a voice tags forall my contacts. Then on my BT a2dp I press the utton for voice dialing, then I say "Start Voice Speed Dial" then it turnes on the voice speed dial and I say the name "name" and then the voice speed dial recognizes it on the spot.
I works very nice.
Would anyone like to share the file for voice command or split the cost on the purchase from handango. I do miss that feature of having messages read aloud and commanding programs via voice.
???
i am pretty new to the whole voice command thing and i know that it CAN read my text message out loud, i just don't know HOW to make it happen, please help me
thanks in advance
Sick of Microsoft voice commander 1.6 problems on wm6??
Try this great alternative "Vito Voice2Go v1.51"
Just search it in ed2k or p2p search engine by:" Vito Technology Vito Voice2Go v1.51 Xscale Wm2003 Wm5 Wm6 Cracked-Sympda.zip"
Don’t forget to disable the "mwc 1.6" if you installed it earlier
And make sure you change the voice command button to "voice2go" program
Didn’t try it yet with Bluetooth headset
All the best Miteranix
wm6 voice command
i just installed this on my dash(updated to 1.33 htc rom) my home button is using to voice tag crap does anyone know how to fix it to voice command... everything about the program works it just doesnt let me use the home key to activate can anyone help?
thanks a bunch!
Hello all,
I recently upgraded my T-Mobile MDA C3 to WM6 with succes. The only downside to this new WM6 is that I haven't got the original voice dial software that comes with the T-Mobile version. I am now looking for a simple, lightweight voice dial application, where I can record my own voice per contact.
Does anyone know of an application that manages to do this well?
Thanks in advance!
Mee to
.. I agree.. i could also use this
take the voice control of the Eten X500 ROM, You do not need to save your voice for each record, because this software does it without this.
... thanx - but...
Hmm.. yes but thats part of the problem. Because that sounds like the Voice Commander in WM6 - And i don´t find it eays og god.. I actually would like to be abel to just record the voice info i need for each number, just like in my old WM5
Besides i must admit i´m not smart enough to extract it from the ROM, I newer tryid that
I have used a few programs that automatically change my contacts into speech so that I dont have to record my own voice. Im not very font of this method, because it requires english pronaunciation of my contacts' names. As I am from Holland, this just doenst go over so well. Thus I want to record my own voices.
I just want to use it for voice dialing: I'm not interested in starting programs with my voice. Most programs that do this run to slow to quickly dial a contact because they are hogged with features.
Is it possible to extract to voice dial software from the original T-Mobile WM5 rom? Because this software does exactly what I want it to do!
Voice command is junk. It doesn't work. I would like to have the "voice tag" app that I had on my Tilt. It wasn't perfect but it works a lot better that the M$ voice commander. At least I was able to record a voice tag and attach it to anything I chose.
Does anyone know if the old voice tag app will work on WM6.5? And if so, where to get it? I had it at one time because I loaded it onto a 8525.
Thanks!
jxmot said:
Voice command is junk. It doesn't work. I would like to have the "voice tag" app that I had on my Tilt. It wasn't perfect but it works a lot better that the M$ voice commander. At least I was able to record a voice tag and attach it to anything I chose.
Does anyone know if the old voice tag app will work on WM6.5? And if so, where to get it? I had it at one time because I loaded it onto a 8525.
Thanks!
Click to expand...
Click to collapse
Prolly from BlownFuze, here ya go:
Cyberon Speed Dial, also launches apps. This one I use all the time.
http://www.blownfuze.org/files/CYBERON_VOICE_SPEED_DIAL_1_2_B080617_0.CAB
Cyberon Voice Commander, Do not know for sure cuz I haven't used it.
http://www.blownfuze.org/files/CYBERON_VOICE_COMMANDER_V2_5_1B806192_0_ENG.CAB
As far as I know these are not warez related in any way. Dougs had them posted over there forever and a day and I don't think they would be there if they were.
Have fun ..... HTR