i have problem... i trying to flash my diamond friends, and i use mtty(test29), but i don't know his diamond is not already had HSPL, and its too late... the phone already formatted, and stuck @ Touch diamond... but still can access bootleader.
i solve this with trying to flash with original ROM,
1. enter bootloader, connect to PC. and the PC will detect it as Qualcomm Device/HTC Device or else.
2. run the original RUU, then its flash even though the activesync not GRENN
3. after flashing, do the basic setting, connect your phone again via activesync
4. run HSPL
thanks... hope its can help for any one who do mtty before HSPL the device
hi, glad to know ur problem has been solved.
if it wudnt be much can you share the solution to others and rename the title "help" to SOLVED
ayyu3m said:
hi, glad to know ur problem has been solved.
if it wudnt be much can you share the solution to others and rename the title "help" to SOLVED
Click to expand...
Click to collapse
yeah.. just get panic at first time then i not thinking to flash with signed ROM. thanks
Related
HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.
I have a different device(ipaq hx2490b pocket pc without phone) but exactly the same broblem.
Any help will be appreciated.
Try this........
magicbullet said:
HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.
Click to expand...
Click to collapse
Hi.
Extract the zip file and copy the exe onto your device. ActiveSync your device to the desktop. Run the exe file via file explorer to put your device into a "safe bootloader" state.
Run the ROM of your choice.
I always run this file before installing any rom even though I initially Super CID my device. Having said this, most custom roms have the option to force SSPL before running the ROM. Select this option if prompted.
Rename the rom HERMIMG.NBH, stick it on your SD card, soft reset to the bootloader and flash from there. Quicker and more reliable in my experience.
magicbullet said:
HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.
Click to expand...
Click to collapse
is your PDA still on 4 color screen ? than you may need a entire diffrent procedure to flash
Hello, I cant follow/or understand the guides found here or in
trinityguides to recover my device.
I have successfully flashed severa cocked roms before, however this last one failed and left me in tri-color screen displaying SPL-9.99-CP
What do i need to do, my active sync want connect and give me the green OK.
It say it cant detect my device when i connecs it?
Please help, im not good at this, how can i get the device to be recognized by
active sync?
Any help very much appreciated!
allanredo said:
Hello, I cant follow/or understand the guides found here or in
trinityguides to recover my device.
I have successfully flashed severa cocked roms before, however this last one failed and left me in tri-color screen displaying SPL-9.99-CP
What do i need to do, my active sync want connect and give me the green OK.
It say it cant detect my device when i connecs it?
Please help, im not good at this, how can i get the device to be recognized by
active sync?
Any help very much appreciated!
Click to expand...
Click to collapse
In bootloader mode AS will not recognized the PDA. As I see there is DES crash proof hard-spl on your PDA. Stay in bootloader mode, and try to flash an other rom, or the original offical rom. If does not work here is a useful link:
http://forum.xda-developers.com/showthread.php?t=308691
thanks for your quick reply!
how can i flash without the active sync is connected?
i have tried but the rom update utility says it cant find device and exits
or can it be done withot connection, if so how?
thanks for all input, as i said im not an experienced "flasher".
I don't know why, but after successfull cooked rom update (Schap, Faman, etc..) the last one didn't work and stick to 3-color (I'm under olipro 1.3)
I just made a spl update without any pb (take a look if on your pda screen it shows USB instead of serial) don't care about activsync
Then a radio update (1.40 instead of 1.50).
Shap rom update didn't work anymore (cache issue), so I'd just copied RUU_signed.nbh from SChaps replacing the one into Fman folder, and just working fine...
If it can help you.
Had this kind of problem
Simplest thing is to load rom from SD card (do search on this).
In short get the ROM you want - ROM***.nb file and rename it as TRINIMG.NB put it on the SD card. Launch bootloader and follow instructions. Otherwise check thread VISTA FLASH DISASTER...
Good luck,
Solved!
I reconnected the phone ( it sad USB in the bootloader btw)
Downloaded schaps wm6pro and unzipped, enterd the ruu and flashed, even thoug active sync was inactive.
I didnt have to go any further than this.
Many thanks, now i might dare to try som more roms, done ax3ls and karmba's so far looking forward to test schaps now.
Look in the Trinity Wiki. It describe how to flash from the SD card. this will fix you up.
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
aali-01 said:
hi guys,
i have a problem with my touch diamond. recently i flashed a rom with had dual boot in it. and i started facing the following problem.
some software in my phone hangs up and whenever restart, it doesnt boot. that is , doesent go beyon the screen that says "Touch Diamond" after doing the hard reset it becomes stable for a while. but after sometime it again does the same thing.
i would highly appreciate if anyone could help me with this issue.
Click to expand...
Click to collapse
You must flash the rom using MTTY
http://forum.xda-developers.com/showthread.php?t=540290
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
aali-01 said:
Thanks mate.
i am also facing the signal problem. and the device info says "1.20 olinex" in the radio version.
kindly suggest a gud radio as well.
Click to expand...
Click to collapse
There is not a perfect radio.You must flash some radios from
http://forum.xda-developers.com/showthread.php?t=470306
and check which is the best.
As for 1.20 olinex i think you must upgrade to 1.93
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
aali-01 said:
where would i find that radio? what radio would u recomend ? kindly share the link.
thanks
Click to expand...
Click to collapse
i have 1.17 official diamond radio.But in every rom you flash there is a radio that chef recommend.
http://forum.xda-developers.com/showthread.php?t=580490&highlight=RADIO
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
aali-01 said:
brother i have downloaded the x86 driver from that link that you mentioned earlier. i have connected my device through USB in the bootloader mode. when i try to update the driver, my computer says that there is no need to do that !!. i am running windows xp. kindly help
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=4fQE0P3diKg
This a tutorial from awran5.
Search and the first link "the definite mtty thread"
brother i have tried everything but still not able to get USB in the combobox
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
aali-01 said:
brother this time everything was done. i entered all the commands and on the last command "task 8" it got restarted itself and didnt load any operating system. i also put my rom in the internal storage root.
kindly help me man !!!
Click to expand...
Click to collapse
Happy that all gone well.
Thanks to xda
You have to download the official rom from the htc web site... then flash it and after that flash first the recomended radio and then the rom that you chose...
I dont know if you already know but.... rename any rom that you want to flash with this name...DIAMIMG...and then copy it to the internal storage....after that restart....and press backwards and volume down keys together and install the new ROM....by pressing the power key...
think this will help
try this will definitely work cause i have same problem too!!
read carefully and try it if u have this problem u have to use mitty everytime u flash(i think cause for me is every time i flash new ROM)
xxxx://forum.xda-developers.com/showthread.php?t=540290
replace xxxx with http
Thanks to all man. my problem is solved.
First of all I would like to say hello to everyone in this forum!
Before some months i managed to use a cooked rom to my diamond (bsb 6.5.1 g)
under win xp and everything was ok.
Today (running win7 x64) I tried to flash another rom.I installed the drivers,ran mtty and when I tried to run custom ruu,it showed up but in the main program I could not see what to flash.Unfortunately I hit flash,something was flashed (i don't know what) and now the diamond stuck!I only can go to bootloader mode.
I think that custom RUU didn't work good to win7 x64,so I didn't show me what to flash.
Do I have to throw away the diamond?
Any help?I am desperate...
Thank you in advance
Strange i'm with windows 7 x64 ultimate and i can flash without problems
If you are in bootloader mode,
connect to the pc then run custom ruu
Flash a rom that is known to work,
Maybe the rom you were using before,then copy the nbh of the rom you want flash in the internal storage
rename it to diamimg and soft reset the phone,keep pressing volume down and back,then follow the instructions on the screen
Mtty won't work on x64
You have to boot your pc,press f8 and choose "disable driver signature enforcement"
Now you can use mtty
Thank you my friend for your answer.
The problem is that when i start ruu i see that screen (photo).This mistake i did before and the phone was badly flashed.It doesn't give me the option to select the rom I want to flash
Any suggestions?
Is there a ruu working good at win7 x64?
just flash the official ROM from HTC support and it will work
Lykoni said:
Thank you my friend for your answer.
The problem is that when i start ruu i see that screen (photo).This mistake i did before and the phone was badly flashed.It doesn't give me the option to select the rom I want to flash
Any suggestions?
Is there a ruu working good at win7 x64?
Click to expand...
Click to collapse
i have screen like yours,but i flash without problems
Thank you all,I will try to flash another rom again and I 'll inform you about the results
Lykoni said:
Thank you my friend for your answer.
The problem is that when i start ruu i see that screen (photo).This mistake i did before and the phone was badly flashed.It doesn't give me the option to select the rom I want to flash
Any suggestions?
Is there a ruu working good at win7 x64?
Click to expand...
Click to collapse
Keep only one nbh file (the one you want to flash) in the folder together with CustomRUU.exe. Than you can be sure that it is the correct one to be flashed.
My screen is similar to yours, probably a bug in CustomRUU.exe for version display. With the above trick you will always flash the correct image with a little care.
Try MTTY from within VMWare Workstation with a virtual Windows XP. It always worked for me. (No need to disable driver signing).
Wish you good flashing,
Cina.
Lykoni said:
Thank you all,I will try to flash another rom again and I 'll inform you about the results
Click to expand...
Click to collapse
I wish you good luck
I usually flash from phone,so i hardly never have problems with w7 x64
hello guys,
after a long research i landed to this forum at last.
today morning i had a client who wanted to have new rom on his tp2 with russian language. but unfortunatly i flashed the tp2 with a wrong flasher! first time hapening something like this... i was pretty sleepy that i didnt even recognised that it was the wrong one... and now the client wants his phone back but the phone dosnt even turn on and not going in the boot menu... only when i plug the usb cable to the pc with the tp2, the pc recognises that there is a usb connected.. but only this.. im really stuck in a bad situation i would be very appreciative if someone can help me with this out the client will come tomorrow again, i hope there is some options to get the tp2 back alive
Try to flash back with stock, but depending on what you've flashed, it might very well be bricked.
This is why you should always be careful as to pay attention to what you are flashing.
Did you apply the wrong hSPL, or the wrong ROM? Did you flash something meant for a CDMA device on a GSM device...? Please, explain exactly what you have done.
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
yildizgsm said:
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
Click to expand...
Click to collapse
You flashed a RHOD with hSPL for BLAC. That's pretty blatant mistake dude.
I'm not sure if there's a way back. Try flashing stock like I already suggested. Try relocking too, I don't know.
You might have to go into mtty, erase everything, flash the radio, then flash stock. Next time, be more careful.
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
yildizgsm said:
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
Click to expand...
Click to collapse
Try flashing via SD?
yildizgsm said:
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Click to expand...
Click to collapse
HardSpl doesn't show a progress bar when flashed. Can you manually put the phone in bootloader mode (Press volume down button and power it up)?
If you can get it into bootloader what does it show on the screen? You may be able to flash the shipped rom after you are in bootloader if when you connect to your PC it says USB toward the bottom of the bootloader screen and then click on the exe for the shipped rom on your PC. Or maybe try flashing the re-locker as suggested earlier to see if you can install the correct SPL.
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
Click to expand...
Click to collapse
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
cajunflavoredbob said:
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
Click to expand...
Click to collapse
Indeed, and a great way to end the thread.