Develop Bugs

Unable to boot up after upgrade ROM to WM6

I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.

Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!

yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.

It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???

motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.

Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....

Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks

Error message I recive at the 3% stage when using the German ROM and english update util.

use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112

Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?

motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.

I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.

What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.

So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!

ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks

unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help

Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted

Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0

Cant Upgrade to any ROM?

HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.

I have a different device(ipaq hx2490b pocket pc without phone) but exactly the same broblem.
Any help will be appreciated.

Try this........
magicbullet said:
HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.
Click to expand...
Click to collapse
Hi.
Extract the zip file and copy the exe onto your device. ActiveSync your device to the desktop. Run the exe file via file explorer to put your device into a "safe bootloader" state.
Run the ROM of your choice.
I always run this file before installing any rom even though I initially Super CID my device. Having said this, most custom roms have the option to force SSPL before running the ROM. Select this option if prompted.

Rename the rom HERMIMG.NBH, stick it on your SD card, soft reset to the bootloader and flash from there. Quicker and more reliable in my experience.

magicbullet said:
HI all,
i have HTC tytn with the following
radio 1.41
Hard SPL 2.10
and Schaps 4.00.
My question is how can i flash my phone with another rom ex: schaps 4.22?
I have done some research a bit and the first time i flashed my celphone was a success. now i cant flash my celphone anymore and i could not find the reason why? so here is the situation.
my celphone can sync with PC.
any roms can find my SPL when i activate the exe
then u click next and update and stuff.
but here is the problem
my PC screen goes 0% try to start the flash, BUT my cellphone stuck at 3-4 colors screens and it will not up date.
any help?
i appreciate your time for reading this and reply to my message.
Click to expand...
Click to collapse
is your PDA still on 4 color screen ? than you may need a entire diffrent procedure to flash

Please Help! Upgrade ROM code error...

Hi, hoping someone can help.
Getting the following. Can't get past it. Also what does the Diam100 stand for as I notice others have different.
A tri-colored screen that reads as follows:
Diam100 64M
SPL-1.37.0000
MicroP-Diam (LED) v.11
-----------------------
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
Thanks for you help!

1: state the subject in the thread title, that's what it's for
2: search is your best friend; the issue you mention has been discussed in several threads
3: I'd recommend: get into bootloader mode (seems like you can); install hardSPL again, flash again with any ROM supported by hardspl.
4: insert [solved] in front of your thread title.
5: this is NOT a relevant subject for this forum (it's got nothing to do with rom development)

apologies, im new to this (only got the diamond today) and havent been able to use it yet and this forum was the closest thing i could find to getting it working.
Im unable to enter bootloader mode (volume down, reset?)
Also can't get my diamond to connect to pc and keep getting connection errors when trying to install Hard-SPL?
Thanks, your help is appreciated.

The tricolor screen IS bootloader mode.
Just run the HardSPL, then Rom upgrade utility from a rom, and that's it.
IF you got it in this state, you'd probably want to return it (you got warranty?)

Thanks for your help.
Is HardSPL going to install even though ActiveSync isn't recognising the device (ie not connected). When i run it it seems to work and then a grey screen with 0% shows. Then the install program comes back with a 'connection problem' message,i go through all the steps but just keeps happening. I read posts on this earlier today but it seems the install program is fixed and shouldnt do it any more????

...also ive done all the firewall changes to make sure it connects etc etc. Forgive me if im not doing something that has been posted already, but i couldnt find it.
Thanks.

I had the same problem make sure you install the HARD SPL but the unsigned version not the sign version.....it should work them.....

i think there's two issues people are describing here..
1) installing hard spl.. if you get the 0% error, then you need to follow the instructions in the thread and manually run SSPL from your phone and then start the RUU
2) if you keep getting errors while trying to install your rom AFTER installing hard-spl, then you probably are flashing an unsigned ROM on the signed hard-spl.. go to the sticky thread and download a signed version of the ROM you want..

Thanks guys. I dont see how i can do the manual install, as it requires me to copy a file onto the diamond and at this stage i cant even get activesync to connect to it. I dont beleive its a problem with activesync or the pc as ive tried many many things, but rather that the diamond isnt communicating properly.
Also i havent even got to installing the new ROM yet as i cant get past HARDSPL install.
Do you think installing the un-signed HARDSPL version will work? as in will it install when the signed version won't?
all your help is very much appreciated. I cant wait to actually turn my phone on for the first time!

you haven't turned it on yet
is that right?
you have not had it working yet?
or have you tried to update it even before using the phone???????

yeh unfortunatley thats right, yet to turn it on. hopefully will have it up and running shortly...

1) can you confirm exactly what happened to get you stuck in the bootloader screen? (it usually doesn't just happen by itself)
2) Have you tried to soft reset to get your device out of bootloader?
3) are you flashing in win xp or vista?
4) are you connected through a usb hub?

yes, tried soft rest but it just returns to bootloader screen.
using winXP SP3. Not using a USB hub. have tried different ports.
Have tried the signed and unsigned versions of HardSPL.
I keep getting to the 0% grey screen and then the communication error 262.
Maybe i should try and just flash the original ROM? Does anyone know where I can download it from and the HTC e-club doesnt have it? Or is this not the next step???
Thanks!

yeah try the original ROM..
but still i don't understand how you got to this point.. what were you trying to flash when it got stuck in bootloader?

I bought the phone like this.
Do you know where i can get the original ROM from? I tried e-club (both worldwide and SEA) no luck.
Appreciate your help on this.

?? that's quite strange... is there any reason why you're not just returning it for a new set?

try this thread for SEA ROM

I bought it whilst overseas last week in SEA. Im now back in australia and would like to try my best to fix it before going down the long and difficult warranty path.
Do you think its buggered? Or the fact that its in the bootloader screen and giving me this message quite common on failed ROM updates?
Do you think an orginal ROM install will fix it? if so where can i get it from?
Thank you.

well that's what i'm asking..
you got this screen when you pulled it out of the box, or tried to update the ROM and then hung on this screen. also, if you did try an update, was it a SEA update, or australian ROM
i wouldn't say its a common issue.. i also don't think your device is bricked, since its showing bootloader.. diamond is relatively new so i don't really know a lot about getting it out of this state.
trying to load original ROM is a good option.. one thing is for sure, before any further flashes (after you get out of this mess) you want hard-spl on your device.
If flashing original ROM doesn't work, i'd suggest PM'ing walshieau, olipro, or pof as they know a lot more about this type of stuff.. do post your results

Thanks for the link above. i'll give it a go. is it different from the one in the ROM list??

How to flash my HTC Touch pro 2 (sprint)

Hi everyone well I'm new to the flashing and dont want to jump any steps as this could possible brick my phone...
I've been having some problems with flashing as i cant find a step by step to flashing my HTC TP2. I've managed to do the RhodiumW Hard-SPL package but after trying to flash to some custom RUU's the installation seems to go fine its not until the phone first boots up, that's when the phone just hangs on the HTC splash screen
From there i cant do anything other then boot up to the tricolor bootloader screen and re-install the original 2.04.651.4 update!
can someone tell me what im missing to be able to flash my HTC correctly, or at least point me in the right direction?
Thank you in advance!!!

step 1
http://member.america.htc.com/download/RomCode/HTC Touch Pro2 (Sprint)/HTC Touch PRO2 MR1.exe
step 2
http://rhodiumw.htc-unlocks.com/hard-spl.php
step 3
http://www.mightyrom.com/mightyrom/touch-pro-2/

Hey Tommy many thanks for the post. I just upgraded my phone and peeling through the information overload, however you direct link does not work for step 1. I want to make sure that I am running the correct piece of software that you recommending. Could you please list the title for that file?

Nevermind I was able to find it via a mirror site.
Back into lurker status for now
Thanks

alright so i was able to install they mightyrom on my phone that went well my phone didnt freeze and everything started the way it should have.
but does that mean i can now flash my phone to other for example "leo cell" or Bxsteez Rhodium" if not how do i get to that point cuz when ever i flas them to they just freese on the white splash screen with the HTC logo in green letters!!
Thanks!

If you have installed Hard SPL then use the sd card method.
1. Format the sd card FAT32 ( they come FAT default) and copy the rom's .nbh file onto it. Rename to Rhodimg.nbh .
2. Insert sd card back into powered off Rhodium. Go into bootloader by pushing down volume and power.
3. If you did it properly and Hard SPL is on your phone then it should say to press power to update os...
If you aren't sure if you have Hard SPL then go to bootloader without the sd card in there, it should say SPL - 0.85.Olinex if you have Hard SPL, anything else won't register the flash file.
Cheers...

OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
"the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license."
Click to expand...
Click to collapse
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.

signalsoldier said:
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
Click to expand...
Click to collapse
I think you should ask this in the hard spl thread in the cmda section...That is the place for those questions Assuming that you have a cdma phone because you did not mention it. Otherwise check the hard spl thread in the gsm section.

Heading that way thanks for the directions mate!

Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!

htcru7 said:
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
Click to expand...
Click to collapse
Just flash away

LOL alright thanks i guess im just paranoid but thanks i'll "flash away"

Lock
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!

Scream-krg said:
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Click to expand...
Click to collapse
the Hard-SPL will only work if you booted windows mobile. you have to sync the phone in windows mobile to the PC.

is there other way to get through in hard spl because i dont have any account for example, paypal...... http://media.xda-developers.com/images/icons/icon9.gif

chrisjavier666 said:
is there other way to get through in hard spl because i dont have any account for example, paypal......
Click to expand...
Click to collapse
Hard SPL is free for non-commercial users.

my tp2 is bricked
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?

nastyrock said:
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
Click to expand...
Click to collapse
Did you try flashing the stock ROM? It's always a good idea to try that if you think there's no hope. It flashes everything.
Also, did you try task29?

[Solve] Flashing Formatted Diamond

i have problem... i trying to flash my diamond friends, and i use mtty(test29), but i don't know his diamond is not already had HSPL, and its too late... the phone already formatted, and stuck @ Touch diamond... but still can access bootleader.
i solve this with trying to flash with original ROM,
1. enter bootloader, connect to PC. and the PC will detect it as Qualcomm Device/HTC Device or else.
2. run the original RUU, then its flash even though the activesync not GRENN
3. after flashing, do the basic setting, connect your phone again via activesync
4. run HSPL
thanks... hope its can help for any one who do mtty before HSPL the device

hi, glad to know ur problem has been solved.
if it wudnt be much can you share the solution to others and rename the title "help" to SOLVED

ayyu3m said:
hi, glad to know ur problem has been solved.
if it wudnt be much can you share the solution to others and rename the title "help" to SOLVED
Click to expand...
Click to collapse
yeah.. just get panic at first time then i not thinking to flash with signed ROM. thanks