I just found out our device has a safe mode
I was having a boot loop so to get out of it I do the three finger salute well.... I forgot to hit the track pad in time and my incredible booted instead, so now it says safe mode in the bottom left and runs fine
Oh BTW I'm running the desire z port
So what would be the use if this?
sent from my AMOLED (better than slcd) DINC
superchilpil said:
I just found out our device has a safe mode
I was having a boot loop so to get out of it I do the three finger salute well.... I forgot to hit the track pad in time and my incredible booted instead, so now it says safe mode in the bottom left and runs fine
Oh BTW I'm running the desire z port
So what would be the use if this?
sent from my AMOLED (better than slcd) DINC
Click to expand...
Click to collapse
Wait whattt?!?! haha, I did NOT know this! How exactly did you do this?
It's true... I'm in safemode now. I booted from power off with volume rocker up pressed. It vibrated during boot animation and I released power + vol up and now in safemode.
hold track pad while start up
For AOSP Roms. (CM6, UD, & etc..)
Sent from my ADR6300 using XDA App
Is there any reason for this? Lol
Sent from my Droid Incredible running Myn's Warm Two Point Two RLS4.
initewolf said:
hold track pad while start up
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Doesn't that just put you in HBOOT?
Sent from my Droid Incredible running Myn's Warm Two Point Two RLS4.
gmichaelow said:
Wait whattt?!?! haha, I did NOT know this! How exactly did you do this?
Click to expand...
Click to collapse
During the boot animation I held vol down and power
sent from my AMOLED (better than slcd) DINC
Lol. What's the purpose of safe mode on a phone?
Sent from my ADR6300 using XDA App
KGBxxx said:
Lol. What's the purpose of safe mode on a phone?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
From HERE "blah blah blah...Then the Safe mode notification will be shown on the bottom left of the display. In Safe mode, all third-party applications will not be executed so you can boot up your phone successfully to uninstall any applications that you may have recently installed or which may be stopping your phone from booting correctly"
For example, if you have SetCPU configured to clock your phone at 2.3GHz at boot, then you won't be able to boot up normally. You would boot into Safe Mode, uninstall SetCPU, then reboot normally.
MadSage said:
For example, if you have SetCPU configured to clock your phone at 2.3GHz at boot, then you won't be able to boot up normally. You would boot into Safe Mode, uninstall SetCPU, then reboot normally.
Click to expand...
Click to collapse
Wish I knew that when I was flashing 1.15 overclocked kernels . Lol. Good to know this useful find.
Sent from my ADR6300 using XDA App
This would have saved me from restoring full or partial backups a few times. I had no idea and thanks so much for this.
Related
Anyone plz I appreciate any knowledge or experience on this, ok I have a replaced dinc from insurance and rooted just like old one but problem is the power button is behaving crazy short press should turn off display and long press should be reboot options but it doesn't even respond and if the screen shuts off power button doesn't wake phone I need to do battery pull. I've checked all cm 6.1 settings same settings as previous dinc. Any help plz I dread having to send the phone back because I'll have to go back to stock before sending it in thanx
Sent from my ADR6300 using XDA App
nerogold said:
Anyone plz I appreciate any knowledge or experience on this, ok I have a replaced dinc from insurance and rooted just like old one but problem is the power button is behaving crazy short press should turn off display and long press should be reboot options but it doesn't even respond and if the screen shuts off power button doesn't wake phone I need to do battery pull. I've checked all cm 6.1 settings same settings as previous dinc. Any help plz I dread having to send the phone back because I'll have to go back to stock before sending it in thanx
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Try a battery pull, and before you put the battery in, hold vol. down and power buttons down. Put the battery back in and keep holding those 2 keys. If you get the white HBOOT screen, it's probably not a hardware thing, but something with CM on your phone. Try another ROM if you can get into recovery through HBOOT.
Thanks I did the battery pull and got the h boot screen but the thing is I also flashed cm 7 and same problem, any idea? Thank you for the quick response
Sent from my ADR6300 using XDA App
nerogold said:
Thanks I did the battery pull and got the h boot screen but the thing is I also flashed cm 7 and same problem, any idea? Thank you for the quick response
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Well, are you dead set on using an AOSP ROM? If so, try ShadowROM from ROM Manager. If not, try a Sense ROM like Myn's Warm TwoPointTwo or Uber Z. Both are very fast, and have a lot of goodies in them (Uber Z has the new Sense interface, an updated music app, themes support, hibernate, etc. and Warm TwoPointTwo has Evo framework for Evo themes and excellent battery life on the stock kernel)
Back up your data/apps and try one of those Sense ROMs, maybe?
Will do thanx
Sent from my ADR6300 using XDA App
nerogold said:
Will do thanx
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Yep np post back with results
Ye I'm sorry I took a while but I'm still trying to get it to work smoothly but still the same I went back to stock and unrooted and the power button still behaves crazy think I might ship it back, might be the only way
Sent from my ADR6300 using XDA App
Yeah it's probably hardware related
nerogold said:
Ye I'm sorry I took a while but I'm still trying to get it to work smoothly but still the same I went back to stock and unrooted and the power button still behaves crazy think I might ship it back, might be the only way
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
When you press the power button, do you actually feel the "click" of pushing the button, or does it just feel soft and mushy?
what do i do? i was flashing cm 7.03 and now its just stuck on the screen where the blue arrow goes around and around. what do i do? any help is appreciated.
happymfeet said:
what do i do? i was flashing cm 7.03 and now its just stuck on the screen where the blue arrow goes around and around. what do i do? any help is appreciated.
Click to expand...
Click to collapse
Take out the battery. Put it back in and start your phone again. If the same happens repeat the battery pull but this time hold down on the volume bar and THEN press the power button to restart your phone. After it starts up in bootloader select recovery by moving the volume bar and then hit the power button again. This will bring you back to recovery where you can flash the rom again or restore your backup.
EdKeys said:
Take out the battery. Put it back in and start your phone again. If the same happens repeat the battery pull but this time hold down on the volume bar and THEN press the power button to restart your phone. After it starts up in bootloader select recovery by moving the volume bar and then hit the power button again. This will bring you back to recovery where you can flash the rom again or restore your backup.
Click to expand...
Click to collapse
Thanks im restoring my backup now. I thought i had bricked my phone or something. i just rooted my phone so this was my first ROM that i was flashing so I wasn't sure of what to do.
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
happymfeet said:
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
Click to expand...
Click to collapse
YouTube is your best friend sir. I wish I had one to direct you to, but a Google or YouTube search with do you just fine.
Sent from my HTC Vision using XDA Premium App
happymfeet said:
I know this going to sound stupid, but can anybody point me to a guide or video on how to flash roms? Im new to all this so I dont want to mess anything up.
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=jYOzWLVnBuc&feature=fvst
Note: Start @ 3:15. In the video clockwork mod is black/green but that's just because its an older version, the newer version is black/orange. All the steps are still the same though.
Sent from my HTC Vision using XDA Premium App
eioous said:
Note: Start @ 3:15. In the video clockwork mod is black/green but that's just because its an older version, the newer version is black/orange. All the steps are still the same though.
Sent from my HTC Vision using XDA Premium App
Click to expand...
Click to collapse
Thanks, appreciate it.
Sent from my HTC Vision using XDA App
happymfeet said:
Thanks, appreciate it.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Also keep in mind that some roms can take up to 5 minutes to load the first time. Normally (but definetely NOT always) as long as it doesn't keep reloading the boot animation, everything is fine - the rom is building your file system on your first boot.
Sent from my shiny metal G2 w/ meXdroid V3
What rom do you all think is the best? Im currently on cm 7.02 and i like it but i want to know your opinions
Sent from my HTC Vision using XDA App
Also what are
Sent from my HTC Vision using XDA App
Also what are the benefits of switching kernels? And which do you all recommend?
Sent from my HTC Vision using XDA App
if you took the time to read about kernels and what they are you would know.
but, i'm in a good mood today:
Kernels govern your cpu speed and how to scale it. Some are locked to a certain frequency set and some are made adjustable, but you have to get an app that interacts with the kernel otherwise it runs at whatever it is preset to.
SetCPU is the one I used, but I know there are plenty out there that others would recommend and swear by in a heartbeat.
mputtr said:
if you took the time to read about kernels and what they are you would know.
but, i'm in a good mood today:
Kernels govern your cpu speed and how to scale it. Some are locked to a certain frequency set and some are made adjustable, but you have to get an app that interacts with the kernel otherwise it runs at whatever it is preset to.
SetCPU is the one I used, but I know there are plenty out there that others would recommend and swear by in a heartbeat.
Click to expand...
Click to collapse
Thanks, which kernel do you have and would you recommend me getting it?
Sent from my HTC Vision using XDA App
I'm using Virtuous rom 1.02 with the advanced kernel. I clocked mine at 475-1100mhz with a low battery profile switch at 275-887 (i think).
Check your rom specific kernel to make sure it runs best for your rom. The rest is personal preference.
Sent from my Desire Z via XDA App
*sigh* Give a man a fish and he will eat all day. Teach a man to fish and he will drink beer all day.
Since you're on CyanogenMod, I recommend Pershoot's kernel (available through ROM Manager). If you're feeling bold, download Flippy's latest kernel. Since I'm running the CM-based PyroMod, Pershoot's kernel is built in.
Everytime i flash a rom do i need to flash clockwork mod recovery?
Sent from my HTC Vision using XDA App
I suggest you check out the stickies sections that has links to a bunch of very well written guides that answer all your questions. the responses you get here are going to turn ugly very fast.
Sent from my T-Mobile G2 using XDA Premium App
If you open clockwork and your current recover is the same as newest version then there is no need to reflash recovery. The only reason to reflash clockwork is if there is a newer version out.
Sent from my HTC Vision, G2, Ultra super premium awesome phone.
This may be a dumb question but before today I never even knew it existed. What is "safe mode"? Is that like safe mode on a windows pc where it only loads default drivers, or is it something else entirely?
Sent from my ADR6300 using XDA Premium App
I'm interested too. In what capacity did you first learn of "safe mode"?
??
I don't think this exists on this phone, so I am not sure what you're talking about here.
There is the bootloader, recovery, and then normal phone functions.
Where did you hear about safe mode?
I know there's hboot.. recovery and bootloader. But safe mode never heard of it
Sent From My Optimized HTC Incredibly Dinc
I actually found out about it on accident. My phone kept looping at the boot animation. I went to pull the battery but accidently hit vol down and power button at same time wile pulling off the cover. All of a sudden phone vibrated 3 times and then booted but it had safe mode printed in the lower left corner. I tried googling it but couldnt find anything thay explained exactly what it is.
Sent from my ADR6300 using XDA Premium App
You can try it on your phones. When the boot animation starts playing hold vol down and power at the same time. Keep holding it untill your phone vibrates.
Sent from my ADR6300 using XDA Premium App
cmlusco said:
this may be a dumb question but before today i never even knew it existed. What is "safe mode"? Is that like safe mode on a windows pc where it only loads default drivers, or is it something else entirely?
Sent from my adr6300 using xda premium app
Click to expand...
Click to collapse
its just like windows safe mode. Only loading the minimum on the phone incase something went honorably wrong.
synisterwolf said:
its just like windows safe mode. Only loading the minimum on the phone incase something went honorably wrong.
Click to expand...
Click to collapse
It did allow me to fix my phone without having to restore a nandroid. I was trying to get a hotboot mod to work on the new stock rooted GB when i got the boot loop. But being able to boot into safe mode allowed me to change the moded file back to the original therfore fixing my boot loop issue.
Sent from my ADR6300 using XDA Premium App
Hmmm I did try it but couldn't replicate your results. I tried holding V-&Power at both the splash screen and the bootanimation. Both attempts yeilded only booting normally.
wildstang83 said:
Hmmm I did try it but couldn't replicate your results. I tried holding V-&Power at both the splash screen and the bootanimation. Both attempts yeilded only booting normally.
Click to expand...
Click to collapse
Hmm not sure works constitently for me. You have to keep holding them until your phone vibrates. You are on a DINC right? Are you on custom or stock rom, not sure if its specific to the rom or not. I am on stock rooted GB.
Sent from my ADR6300 using XDA Premium App
cmlusco said:
Hmm not sure works constitently for me. You have to keep holding them until your phone vibrates. You are on a DINC right? Are you on custom or stock rom, not sure if its specific to the rom or not. I am on stock rooted GB.
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
Yea no, I think its a HTC Sense thing. I'm currently running CM Nightly 168 so I don't think its a 'general' Android thing.
wildstang83 said:
Yea no, I think its a HTC Sense thing. I'm currently running CM Nightly 168 so I don't think its a 'general' Android thing.
Click to expand...
Click to collapse
Good to know seems like it might come in handy sometimes.
Sent from my ADR6300 using XDA Premium App
It happened to me once before, I was flashing stuff like crazy and then all of a sudden "safe mode". I just restored my device and it was gone.
Sent from my ADR6300 using XDA App
After the restore it was all good.
Sent from my ADR6300 using XDA App
I've been doing some more googling and it seems every stock rom running android phone has safe mode, but different phones have different ways of entering into it. Some vol down and power, some vol up and power, some you have to hold the menu button, some vol down power and menu, and some holding down the track ball.
Sent from my ADR6300 using XDA Premium App
Hmm, never stumbled onto that before. Thanks to everyone for feedback!
Interesting, I'll have to try it next time I change up my phone config
Edit:
Wow, that just saved me from a lot of trouble. Flashed a voltage table that was unstable and caused the phone to bootloop, this worked saving me from an uninstall.
CM7 Nightly
Sent from my ADR6300 using XDA App
Cryous said:
Interesting, I'll have to try it next time I change up my phone config
Edit:
Wow, that just saved me from a lot of trouble. Flashed a voltage table that was unstable and caused the phone to bootloop, this worked saving me from an uninstall.
CM7 Nightly
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Saved me a lot of trouble and time too. Cant believe i never knew about it. Also this did work on CM nightly? The earlier post by wildstang said he could not get it to work with cm. Leaving me to believe it was a stock rom or sense related thing.
Sent From My HTC Incredible Android 2.3.4 Rooted - S-OFF Baseband: 2.15.10.05.06
Kernel: Stock HTC 2.6.35.10-g5e15ac4
PRI: 1.28_002 PRL: 52341
Rom: Stock Gingerbread
I don't know, it worked for me yesterday, however I'm not sure what I pressed. I can't seem to get back into safe mode now
Edit, seems like if you press vol down, menu, and trackball it goes into safe mode. I updated my cm7 nightly, now safemode does not work....
Source:
http://androidforums.com/incredible-support-troubleshooting/89073-how-access-safe-mode-android-incredible.html
Sent from my ADR6300 using XDA App
This happened to me yesterday while I was running the RC5 Community ROM. The phone froze would not respond so I went to pull the battery and it rebooted itself into Safe Mode. Took me by surprise too.
Sent from my Synergy Rom using XDA App
no fastboot required on this kernal!
I did not create this or even upload it. I follow leech on twitter and he retweeted this kernal from 0xD34d which im assuming made it for leech's MIUI port! I flashed it in twrp on cm7 and so far all is well. very snappy and I'm stoked to let others know about it. 3333 in quadrants, enjoy!
install instructions:
download and place in SD card
reboot into recovery
make a backup!
flash zip in recovery
reboot!
in order to prevent the sod, put minimum frequency to 600. this prevents the device from going into a deep sleep. i personally run this kernel at 600min 1300max n it is super zippy.
fixed crt
fixed wake issue
1.3ghz added
updated 1.11.12 0xd34d v13
http://goo.gl/Lw3dI
sent from my kindle fire
Noob question... how do I keep CRT OFF?
Sent from my SGH-I897 using XDA App
treo750ii said:
Noob question... how do I keep CRT OFF?
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I believe it is in the settings menu, maybe under cyanogen seetings....Don't have my device in front of me to look for the exact spot it is in.
All works stable on 1200 mgh
Exactly what all works?.
its easier for me to tell u what's not working at the moment..
-screen off animation
everything else. feels dandy!
Sent from my HTC Glacier using xda premium
So does this overclock? I'm very excited to see a kernel that's so easy to install. I'll try this tonight and give my impressions.
Matt V said:
So does this overclock? I'm very excited to see a kernel that's so easy to install. I'll try this tonight and give my impressions.
Click to expand...
Click to collapse
yup! 1.2ghz!
Sent from my HTC Glacier using xda premium
Frame locked at 50fps, bloody quick Quadrant results, hit 3734 with Performance governor at 1200Mhz.
Sent from my GT-I9100 using XDA Premium App
Are you guys using SetCPU with this? If so what profile should I use?
Matt V said:
Are you guys using SetCPU with this? If so what profile should I use?
Click to expand...
Click to collapse
Yes, just changed the governor and ran Quadrant 4 times.
Sent from my GT-I9100 using XDA Premium App
After flashing this I can't get my kindle to come on, the screen will come on but its black, and I can't get ADB to connect. Any ideas?
Im on CM7
Can you get to TWRP? And did you make a backup?
Skimp Killah said:
After flashing this I can't get my kindle to come on, the screen will come on but its black, and I can't get ADB to connect. Any ideas?
Im on CM7
Click to expand...
Click to collapse
bad download? u could also flash cm7 back ontop to put the stock kernal back if u didn't make a backup. if u do this, reflash gapps
Sent from my HTC Glacier using xda premium
Going to flash this now, but running quadrant prior to flashing I ranged from 2300,2700, 2900(not exact). So I'm going to dl and try it anyways and see how she runs
Just flashed this with CM7 and am stuck on a black screen too.
I'm gonna reflash my backup I made right before but any tips?
Matt V said:
Just flashed this with CM7 and am stuck on a black screen too.
I'm gonna reflash my backup I made right before but any tips?
Click to expand...
Click to collapse
I got the same thing, but rebooted and turned off the screen on/off animations just to be sure and I was back at my normal homescreen.
I have them off and still can't get it to boot.
Ok let me go binge drink my moms whiskey and try to get into a destructive mood then ill flash kernel and join you.. wud luvto see what the black screen looks like.
Tip. Hold the damn power button for twenty frigging seconds. Device will turn off. Turn back on and when yellowtriangle coes on press power untik the green light goes orange and fixit
Sent from my Amazon Kindle Fire
Froze when trying to install quadrant from market, then this broke all my market apps that were installed prevoiusly, gave me an SD card error when I tried to reinstall them from market..
I'm not referring about bootloader or recovery, but Safe Mode. The phone boots up, but the word Safe Mode is on the bottom left corner of my screen. My downloaded apps are missing(part of safe mode), but the pre-installed apps are still accessible.
I've tried the obvious things such as turning off and back on and pulling the battery but I can't get it to just boot normally.
I don't want to have to wipe it unless I have to, especially since I'm unsure that will fix it.
Has anyone had this problem or have any suggestions as to how to get it out of Safe Mode?
Thanks
Anyone?
Sent from my PC36100 using XDA App
out of curiosity what Rom are you running. could it be a setting you accidentally toggled. I run Miui and theres a private mode
Rockin' the Miui Incredible 2 w/xda premium
Stock. Not even rooted.
Sent from my PC36100 using XDA App
OK. I saw something at androidforum. com it was about a Samsung fascinate but that post said that he had to dial *228 to get it to go away
Rockin' the Miui Incredible 2 w/xda premium
rehabray said:
OK. I saw something at androidforum. com it was about a Samsung fascinate but that post said that he had to dial *228 to get it to go away
Rockin' the Miui Incredible 2 w/xda premium
Click to expand...
Click to collapse
No luck there. It just goes thru the programming process and reboots when it's done. Comes back on to Safe Mode again. I already did a factory reset and still getting the same results.
Did this ever get resolved? My wife's Fascinate is stuck in Safe Mode right now.
Sent from my DROIDX using XDA