Develop Bugs

[Q] LeeDrOid_2.3d_A2SD install problem

Hi all,
Any help you can provide would be greatly appreciated. New to all of this but I read through the overwhelming info on here before getting started. Successfully rooted via unrevoked, no problems there. SD card was correctly partitioned for A2SD. Trying to install LeeDrOid_2.3d_A2SD via ClockworkMod Recovery v2.5.0.9 & I am getting the following error message.
assert failed: getprop("ro.build/product.device") =="
ll getprop("ro.product.board") == "bravo"
E:Error in /sdcard/LeeDrOid_2.3d_A2SD.zip
(status 7)
Installation aborted.
Not sure what info you need but here is what's listed on Recovery screen:
BRAVO DVT2 SHIP S-OFF
HBOOT-0.98.0000
TOUCH PANEL-SYNT0101
RADIO-2.05.10.08.11
Thanks in advance!

HDHNTER said:
Hi all,
Any help you can provide would be greatly appreciated. New to all of this but I read through the overwhelming info on here before getting started. Successfully rooted via unrevoked, no problems there. SD card was correctly partitioned for A2SD. Trying to install LeeDrOid_2.3d_A2SD via ClockworkMod Recovery v2.5.0.9 & I am getting the following error message.
assert failed: getprop("ro.build/product.device") =="
ll getprop("ro.product.board") == "bravo"
E:Error in /sdcard/LeeDrOid_2.3d_A2SD.zip
(status 7)
Installation aborted.
Not sure what info you need but here is what's listed on Recovery screen:
BRAVO DVT2 SHIP S-OFF
HBOOT-0.98.0000
TOUCH PANEL-SYNT0101
RADIO-2.05.10.08.11
Thanks in advance!
Click to expand...
Click to collapse
Make sure you downloaded the entire file. Ive seen this happen with people that had the file not completely downloaded.
Use MD5 checksums to make sure its the correct file.

Neh doesn't matter you have a CDMA desire. This is not supported by leedroid.
Look in this thread and find a CDMA rom.

Thanks, I had trouble downloading the entire file but the Torrent route seemed to work. Downloading from another source now & trying again. MD5 checksums, is that in the recovery module? This is all new territory for me so please excuse my ignorance.

Thanks Ghost!! Checking out the thread now. Do you have a suggestion for a stable CDMA option? Not looking for anything exotic, A2SD is the main priority with all stock functions still usable.
TheGhost1233 said:
Neh doesn't matter you have a CDMA desire. This is not supported by leedroid.
Look in this thread and find a CDMA rom.
Click to expand...
Click to collapse

Error in Recovery and Flashing! Help!

Ok, I’m a new Desire user and rooted the phone using unrevoked 3.32, I went into ClorkworkMod 2.5.0.7 and this is the error:
E:Can’t find MISC:
E:Can’t mount CACHE:recovery/command
E:Can’t find MISC:
E:Can’t mount CACHE:recovery/log
E:Can’t find MISC:
I followed the steps, and I don’t know what I did wrong. I can’t flash a new ROM (Oxygen 2.1.2). Here’s the error:
Installing update…
assert failed: write_raw_image("/tmp/boot.img"."boot")
E:error in /sdcard/update-oxygen-2.1.2-signed.zip
(Status 7)
Installation aborted
Can anyone guide me?

Flash another recovery in fastboot (if you're s-offed) or with unrevoked if you're s-on

I tried but it does not work with the flash process fails AmonRa finish
root its clockwork ..
Bravo PVT4 SHIP s-on
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27

same problem with my Desire.
I found the recovery-RA-desire-v2.0.1 here work for my desire
flash it using Unrevoked 3.21 here with the custom image option, just point it to the recovery-RA-desire-v2.0.1.img and rerun the root.
then you can flash new rom with no error (status 7)

Unrevoked usually flashes clockworkmod recovery 2.x.x.x. This version 2 does not work with pvt4 versions of the desire:
http://www.roms-au.com/installation/rooting/pvt4-issues/
Flashing amonra recovery will solve your problem. If you really want clockwork mod, you should download clockwork since version 3 oder even 4:
http://forum.xda-developers.com/showthread.php?t=1112658&highlight=recovery

[Q] how to check if i am properly ROOTED?

i am a n00b, so bear with me!
i have used XTC CLIP and gained S-OFF, so i see:
MARVEL PVT SHIP S-OFF RL
HBOOT-0.90.000
MICROP-0451
RADIO-7.46.35.08
i then followed this guide: http://forum.xda-developers.com/showthread.php?t=1195275
and did the PG76IMG.zip + root.zip installs
then i used ROM Manager to install ClockworkMod Recovery and then backed-up my phone image.
-- of note, in the ROM Manager when i was installing CWM (5.0.2.0)- it only listed HTC Buzz (Wildfire), so i chose that as my handset...
was this the wrong thing to do?
i also updated superuser and the SU binary.
so - i tried to install a few different ROMs but none worked, mostly with 'status 7' errors?
how do i know what is wrong?
i checked using Root Checker Basic - it said: "Congratulations! This device has root access!"
the ROMS i am trying are:
Cyanogenmod 7.2.0-RC0-marvel-KANG
JikantaruROM_XE_11711
error log:
-- Installing: /sdcard/update-cm-7.2.0-RC0-marvel-KANG-signed.zip
mtd: successfully wrote block at c4b2c00000000
I:Set boot command "boot-recovery"
Finding update package...
I:Update location: /sdcard/update-cm-7.2.0-RC0-marvel-KANG-signed.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel" || getprop("ro.product.board") == "marvel"
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel" || getprop("ro.product.board") == "marvel"
E:Error in /sdcard/update-cm-7.2.0-RC0-marvel-KANG-signed.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/update-cm-7.2.0-RC0-marvel-KANG-signed.zip")
------------------
i have a feeling i am using the wrong recovery program - but would love some feedback on how to flash a ROM to my phone somehow!

At least you flashed wrong recovery, try from this topic: http://forum.xda-developers.com/showthread.php?t=1439466

flash clockwork mod recovery by alquez, then go boot into recovery, after that put the rom you want on sd card, as a zip, and just install it from the recovery... pm me if u need any help

b02 said:
flash clockwork mod recovery by alquez, then go boot into recovery, after that put the rom you want on sd card, as a zip, and just install it from the recovery... pm me if u need any help
Click to expand...
Click to collapse
i just tried from the above linked thread, when i ran recovery.bat from archive it said:
sending 'recovery' <3820 KB>... OKAY
writing 'recovery'... FAILED <remote: not allowed>
All done have a nice day etc
then when i boot into recovery, i still see:
Recovery v3.2.0.1_xda.cn
is that still the wrong Recovery?

the Superuser + SU binary installed fine... but still cant flash the ROM???
same error as in OP

b02 said:
flash clockwork mod recovery by alquez, then go boot into recovery, after that put the rom you want on sd card, as a zip, and just install it from the recovery... pm me if u need any help
Click to expand...
Click to collapse
ahhhh! yes, this one: http://forum.xda-developers.com/showthread.php?t=1213229
yepppers!
i just installed this one and all problems are solvered!
i have a cool blue android on a skate board loading up right now... wow! time to explore!

Congratulation !

user1829 said:
ahhhh! yes, this one: http://forum.xda-developers.com/showthread.php?t=1213229
yepppers!
i just installed this one and all problems are solvered!
i have a cool blue android on a skate board loading up right now... wow! time to explore!
Click to expand...
Click to collapse
im glad i helped

b02 said:
im glad i helped
Click to expand...
Click to collapse
can you help one step more by pointing me to the best thread describing how to make 1GB+ for apps? using DATA2SD?

On a rom that supports data2sd, like cm 7.2 or jikantaru xe or w/e...
download partition magic (or use any of theese : Best partitioning software), make 1024mb (don't go over it, i have read about some bugs, its enough anyway) ext4 and rest of sd card make fat32, build it in partition magic, then go in options set aplication moving (tick) and choose location to external... and u have it ....
EDIT, i just found other guy wrote this so, but i think it can be used on roms that dont have data2sd, thats whats that installer for i guess
- Make 1GB memory for apps
1. Download cm7.2 port by alquez
2. Download data2sd installer http://www.mediafire.com/?757066a1516tdkt
3. Factory wipe then install cm7
4. Back up SD card
5. In recovery go to advanced -> partition SD card -> 1024mb
6. Install data2sd
7. Boot into cyanogenmod
8. Restore SD card stuff if anything went wrong
9. Enjoy and click thanks to benjamingwynn for his tutorial.
p.s. Make backup of your data card, since you might loose your data if you are partitioning sd card for first time. So once again, backup it.
first one is by me and second is by banjamingwynn as u see ... use the one u like

user1829 said:
can you help one step more by pointing me to the best thread describing how to make 1GB+ for apps? using DATA2SD?
Click to expand...
Click to collapse
You should consider Link2SD as well. In my opinion, the best thread for that on XDA is [TUTORIAL][Link2SD][ROOT] How to prep your SD card for it...Windoze Style. Don't forget to thank d33ps1x if you use it.

CafeKampuchia said:
You should consider Link2SD as well. In my opinion, the best thread for that on XDA is [TUTORIAL][Link2SD][ROOT] How to prep your SD card for it...Windoze Style. Don't forget to thank d33ps1x if you use it.
Click to expand...
Click to collapse
damn - nice tute!!!
wish they were all like that!
will set it up back at home...

[HUGE PROBLEM] Phone doesn't boot!

Before I describe my problem, here are few informations about my phone:
• Unlocked bootloader via htcdev
• SAGA PVT SHIP S-ON RL
• HBOOT 2.00.0002
• RADIO 3822.10.08.04
• Stock ROM T-Mobile PL branded Android 2.3.5 (unfortunatelly messed up )
• Revolutionary CWM 4.0.1.4
So, I wanted to flash CM7 and I got this error:
Code:
--Installing: /sdcard/unofficial-CM7-marvel-nightly-02_26_2012.zip
Finding update package...
Opening update package...
Installing package...
assert failed: getprop("ro.product.device") == "marvel" || getprop("ro.build.product") == "marvel" || getprop("ro.product.board") == "marvel"
E:Error in /sdcard/unofficial-CM7-marvel-nightly-02_26_2012.zip
(Status 7)
Installation aborted.
Someone said that I should wipe before installing ROM, so I wiped data/cache and dalvik cache but I still got the same error. I've found out that I can format system partition in "mounts and storage" so I did it without making backup before... Of course after that error appeared again and moreover I can't boot stock ROM now :/ It freezes at boot image and nothing happens.
I've tried to flash unziped EU Stock ROM from PG76IMG.zip file via flashboot (commands flashboot flash system system.img and flashboot flash boot boot.img). Terminal said that everything is ok, but still freezes at boot image. Strangily flashing userdata.img, rcdata.img, ramdisk.img ends with fail. I really don't know what to do... Putting PG76IMG.zip into root of sdcard and turning device into bootloader mode doesn't work, since bootloader can't see it. Updating via RUU doesn't work too, I've got errors every time...
Please, help me. Is there any chance to fix this issue?

you have the old wildfire not the wildfire s so none of this will work go to the wildfire forums

kagevazquez said:
you have the old wildfire not the wildfire s so none of this will work go to the wildfire forums
Click to expand...
Click to collapse
Nope, it's Wildfire S. I've got touch buttons under screen not trackball as pure Wildfire.

Saga is suppose to be the Desire S

doyeb said:
Nope, it's Wildfire S. I've got touch buttons under screen not trackball as pure Wildfire.
Click to expand...
Click to collapse
Are you sure that it is Wildfire S ? It looks like you have desire s not wildfire s which is very similar to desire s
Sent from somewhere with HTC Wildfire S

Agreed, wildfire s is called marvel and old wildfire(mine) is called buzz. If I was you I would go to shipped roms.com and see if you can find saga, then try on your device.
sent from my ice cream sandwich powered HTC WILDFIRE B-)

go to desire s forums, you will find what you want
Sent from my HTC Wildfire S using Tapatalk

Can't Install CM10 on HTC One X International

Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.

Bad download? Did you check the md5 before trying to flash?

musangking07 said:
Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.
Click to expand...
Click to collapse
Have you tried downloading the file again or from a different mirror. Could be an error in the file itself.

musangking07 said:
Hi All,
I can't install CM10 on my HTC One X (International) version.
This is the error.
Installing: /sdcard/cm-10-20120802-p12-endeavoru.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "endeavoru" | | getprop("ro.build.product") == "endeavoru"
E : Error in /sdcard/cm-10-20120802-p12-endeavoru.zip
(Status 7)
Installation aborted.
Please advise..
TQ.
Click to expand...
Click to collapse
Installed cm-10-20120815-a5-endeavoru on my international OneX.

EddyOS said:
Bad download? Did you check the md5 before trying to flash?
Click to expand...
Click to collapse
Yes i did. The md5 is correct.
B3r3av3d said:
Have you tried downloading the file again or from a different mirror. Could be an error in the file itself.
Click to expand...
Click to collapse
I can't find any mirror. Do you have other mirror?
Thanks for your concern.

You should modify the updater-script and remove the part related to the device control at the top, but I don't know if you can do it...
I you need I can do it for you...just post the updater-script under META-INF/Android..
Cheers

Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?

Same Issue
I'm having exactly the same issue trying to install Tripnravers CM10 rom.....
Anyone have a solution that I can follow? So frustrating!!

Rusty! said:
Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?
Click to expand...
Click to collapse
He is right. Does it say endeavoru or evita?
Sent from my HTC One X using xda premium

here the anwser
open cm-10-20120814-UNOFFICIAL-d2att whit winRar.
go to : META-INF/COM/google/android/updater-script
open /updater-script whit notepad++ and delete the first line. SAVE IT and boot your device whit cm10.
only way i found.

Danger! Don't modify the script. The rom is not designed for your HOX!

Kenia1234 said:
You should modify the updater-script and remove the part related to the device control at the top, but I don't know if you can do it...
I you need I can do it for you...just post the updater-script under META-INF/Android..
Cheers
Click to expand...
Click to collapse
Hi.. I know how to do it. But I'm a bit worry if this will harm my phone. See the comment from Rusty below.
Rusty! said:
Don't modify the script. That check is there for a reason!
What does your phone say in HBOOT? If it is ENDEAVORU, are you sure you've got the right recovery?
Click to expand...
Click to collapse
Hi Rusty.. Yes.. I've got the right version. It's Endeavoru. My HOX is International version. As I know Endeavoru is meant for HOX International. am I right?

oups
michaffm1964 said:
Danger! Don't modify the script. The rom is not designed for your HOX![/QUI
i did that on my GS 3 and it worked and now im running cm10 perfectly
Click to expand...
Click to collapse

musangking07 said:
Hi Rusty.. Yes.. I've got the right version. It's Endeavoru. My HOX is International version. As I know Endeavoru is meant for HOX International. am I right?
Click to expand...
Click to collapse
You are indeed right.
I can only assume the recovery is wrongly identifying the phone, causing the script to fail.

Now I'm able to install the CM10 but when reboot, the phone got stuck. Cannot reboot. I saw from the installation instruction that we need to do something on 'boot.img' but I don't know how to do that.
Please advise.

@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
Yes I did everything as you mentioned above.
The CM10 that i downloaded is Endeavoru version which is meant for HOX International.

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
musangking07 said:
Yes I did everything as you mentioned above.
The CM10 that i downloaded is Endeavoru version which is meant for HOX International.
Click to expand...
Click to collapse
Are you sure that you've flashed the boot.img from the CM10 zip file?.
musangking07 said:
Now I'm able to install the CM10 but when reboot, the phone got stuck. Cannot reboot. I saw from the installation instruction that we need to do something on 'boot.img' but I don't know how to do that.
Please advise.
Click to expand...
Click to collapse
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.

Laurentius26 said:
@Op,
No mention about these in post 1 so I ask if you don't mind.
Did you unlock on HTCDev?
Did you flash Clockworkmod?
Did you flash SuperSU?
Did you flash boot.img?
And last, did you erase cache?
And also important, which CM10 are you trying to flash?
Click to expand...
Click to collapse
mimik13 said:
Are you sure that you've flashed the boot.img from the CM10 zip file?.
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.
Click to expand...
Click to collapse
Ok.. I'll repeat all the steps and see the result.
Anyway.. Thank you so much.

mimik13 said:
Are you sure that you've flashed the boot.img from the CM10 zip file?.
You indicate here that you do not know how to flash boot.img
This is why you are getting the boot loop.
1. In the CM10 installation zip, "cm-10-20120820-a7-endeavoru.zip" there will be a file called 'boot.img'
2. Extract this file and place it in your fastboot directory. You have fastboot already don't you?.
3. Restart phone in bootloader (Power + vol down)
4. Select fastboot
5. Type these commands "fastboot flash boot boot.img" followed by "fastboot erase cache"
6. Select HBOOT
7. Restart phone.
Click to expand...
Click to collapse
Now I can boot the CM10!!.. thank you very much.