Related
Let me see if I can explain.
I was running Opendesire 4.0.15 (had been rooted using Revoked on a Mac).
I had modified the recovery using Revoked using amon-ra's ps3 image so I have no proper recovery.
I notices using OD Updater that OD 4.0.16 was available, downloaded that and let it flash it itself.
Now the phone doesn't boot properly, I get the O2 splash screen then what looks like a dark grey screen with very thin vertical coloured bands then back to O2 splash.
It occasionally show the Android screen but not much else.
Once it got to the setup screen with the Touch Android to begin picture and the animated finger. However there was a FC on screen and the touchscreen didn't work, so I couldn't progress.
I can get into fast boot and even the modified recovery but I can't see what to do to get a rom onto it or get it to boot up so I can re revoke it for a proper recovery.
It seems if I leave it long enough it gets to the setup screen but no touch screen working. Then it re-boots.
Can anyone suggest how to get a proper recovery file on at least??
Any help gratefully received.
Edit
From Hboot I can see
BRAVO PVT3 SHIP S-ON
HBOOT-0.83.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.10.05.17_2
Jun 10 2010,12.12.05
So it's an SLCD then?
Please help I can't afford another phone.
Thank you.
I can see the device from fastboot, (fastboot devices lists it by it's serial number)
is there any way for get either a new rom or even just recovery onto it from this commandline?
Anyone?
Please
this is what I get, any clues?
c:\android-sdk-windows\tools>fastboot flash system od.zip
sending 'system' (65463 KB)... OKAY [ 11.219s]
writing 'system'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 20.547s
RUU see's it, (when I have it in bootloader) but when it runs through and reboots the phone, the phone sticks on an H T C screen and the pc is counting looking for bootloader but never sees it.
OK, got the HTC screen, unplugged USB, plugged it back in, ran RUU again, started uploading, green bar moving across screen, then it rebooted, waiting for bootloader, RUU then failed, black screen on phone now, no bootloader, no splashscreen nothing.
It vibrates if I hold power button, it doesn't if I hold back button or VOL down with power button.
Now it's dead.
lininjim said:
RUU see's it, (when I have it in bootloader) but when it runs through and reboots the phone, the phone sticks on an H T C screen and the pc is counting looking for bootloader but never sees it.
OK, got the HTC screen, unplugged USB, plugged it back in, ran RUU again, started uploading, green bar moving across screen, then it rebooted, waiting for bootloader, RUU then failed, black screen on phone now, no bootloader, no splashscreen nothing.
It vibrates if I hold power button, it doesn't if I hold back button or VOL down with power button.
Now it's dead.
Click to expand...
Click to collapse
what RUU did you flash it with?
sounds like you flashed it with a pre slcd screen RUU
the only O2 one I could find on here
RUU_Brav2_UK_1.20.207.1_Radio_32.36.00.28U_4.06.00.02_2_release_124865.exe
Now I can still get bootloader / fastboot working, I see it in my device manager and the fastboot command sees it again, is there anything I can do from there?
(damn thing is only 3 weeks old).
Thanks for reply btw
Managed to get a newer Froyo RUU to run to the same stage as I had before so now got a display back , hBoot 093 still for the borked recovery
is there anything I can do other than send it back to HTC?
thanks for reading, really really stuck here.
with files on sd card (pb999.img etc) it now checks those then says CID incorrect
where is it getting stuck now?
is this a branded device? (if unbranded was it branded before)
what did you flash it with?
Is your gold card present?
what os are you using to flash it?
Have you tried using the downgrade utility to flash it back to a version of 2.1? http://forum.xda-developers.com/showthread.php?t=768256
Hello again )
ok it now just goes to the white screen with the 3 androids skateboarding I have have hboot or fastboot, I don't know the significance of those.
if I select recovery it goes to amonra's poc-psfreedom so I can't even reflash it from there
it was originally an O2 UK phone so has the O2 bubbles on screen
I don't have a gold card :i(
I run a mac but I have installed xp on bootcamp to try to resolve this.
I can see the phone is device manager as Android USB Device - My HTC
It boots to the white screen now when I plug in the usb cable
it had been running happily on OpenDesire 4.0.15 with no problem, but when I called the updater to bring it to 4.0.16 it turned into this mess.
the downgrade utility requires a gold card doesn't it? I don't have one (
edit - more info
the RUU file I have tried again is
RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed.exe
it tells me it will go from image version 1.20.207.3
to image version 2.14.207.1
it starts and brings a black screen onto the phone with HTC on it, starts working then fails with erroe 171 usb connection error. (perhaps I need a different usb driver installed?)
edit again - if I unplug the usb cable I get the white screen but only RUU but pull battery and get fastboot hboot back
Hold the press
I think I've recovered it now.
Using that RUU, everytime it stalled out and said waiting for bootloader I tapped the power button and it continued, flashed the whole thing now I seem to have an official O2 Froyo!
Thanks for your input mate.
i dont know how you uninstall that psfreedom stuff, people should just buy the dongle and not risk bricking their mobile phones.
Try intalling the latest version of htc sync or use a pure windows pc rather than bootcamp see if that rectifies it.
its not hard to create a goldcard if you have a microsd slot, I do recommend you make one using the tool from modaco. and try using the downgrader. it could be that the psnation tool is conflicting the the bootloader now its .93
EDIT: was on a call mid type and posted this while you have replied.
Glad its sorted
It's sorted now, thank you.
Dongle is in the post mate.
I really appreciate your input there, I was feeling kinda lonely!
Now it's on what appears to be O2 official Froyo, means no root, DOH!
Cheers fella.
you can use the downgrader tool to downgrade hboot and firware.
then you can root and flash a rooted 2.2 405 rom like the one teppic made
it would then be on the latest 2.2 for EU and be rooted with a compatible hboot
im on hboot 93, im waiting for unrevoked. they seem to be taking an age
You are a genius, I'll have a play tonight.
Thanks mate. - SUPERSTAR -
lininjim said:
I think I've recovered it now.
Using that RUU, everytime it stalled out and said waiting for bootloader I tapped the power button and it continued, flashed the whole thing now I seem to have an official O2 Froyo!
Thanks for your input mate.
Click to expand...
Click to collapse
Hi lininjim ,
I have the same issue as you mention. i get to hboo screen and nothing works beyond that. how did you get your phone to recognize with RUU. coz mine just stays in htc logo and RUU does not recognize it at all...
Vinod
1. Posting in a thread that's one year old is not very useful.
2. Look in troubleshooting guide.
Sorry to say it worked exactly as I posted mate and I got rid of the Android phones back in March.
Sorry I can't help.
sorry admins and pro i have all most posts regarding boot loop and red triangle nothing help hence this.
i have or had rooted desire running oxygen rom, i reflashed it with froyo t mobile rom which went ok and then received up date which i installed through recovery and the phone rebooted and since then it has kept rebooting every min intervals it just gets to white htc screen and hangs for a min and reboots. also when i try to go into recovery i get red triangle i have tried useing fake-flash which gets to about 10% and aborts with virfication failer. i have done hard reset and formated the sdc with fat 32 nothing help's.
bravo pvt3 ship s-on
hboot 0.93.0001
radio-5.11.05.27
this forum has help,d me with rooting and finding good rom for my phone
hop fully some can help me again with this problem
thanks
The red triangle in recovery is the stock recovery. You can press the power button to bring up the menu but it is useless. You can create a goldcard to bypass the verification. Just flash the rom again and see if it went ok.
GoogleJelly said:
The red triangle in recovery is the stock recovery. You can press the power button to bring up the menu but it is useless. You can create a goldcard to bypass the verification. Just flash the rom again and see if it went ok.
Click to expand...
Click to collapse
GoogleJelly.
From what i can understand about gold cards is i need to plug my phone into the computer and mount sdc. I can not connect my to computer due constant rebooting loop it is stuck in.
Never apply UTA updates on rooted phones. It's been a while since the last.
Look up some stuff about RUU, there should be plenty old threads regarding this.
Sent from my HTC Desire using XDA App
I have tried the Ruu that i have on pc but the problem is that Ruu does not pick up the phone not fully rebooting also the dose not stay connected long for the ruu to detact and its magic.
update
i HAVE THE BLACK SCREEN OF DEATH as some ppl call it. thats the result of trying to run RUU from it could not find the boot loader
Up date
Found the correct Ruu file now the problem is that when i run the RUU it pick up the fone fine all the details are correct when i cliclk update it comes back with error 171 usb conection failed or some like that. I have installed usb drivers still get this problem i got the drivers from HTC SYNC.
Also i read in the forums that when running Ruu before flashing look a called ROM.zip on C drive i have looked in C drive program file's and found nothing could some one please point me in the right direction as to whr to find file on C drive.
Getting thr very slowly.
Thanks
Again for help
Hi!
First off, I've been searching for the answer all afternoon, but with no luck.
Here's the thing. My GF borrowed my friends old Desire, because her Legend broke.
When we tried to boot it up, it was stuck at the white HTC screen. So i entered Hboot and tried to use recovery with no luck. Recovery was also stuck at white screen.
My friend had removed his SD card before we borrowed the phone. Could that be the problem? Both me and my friend are pretty new to rooting/flashing. All the info he could give me, was that he was running some Modaco rom, and had used Unrevoked to root the phone.
I tried to download a Modaco rom and rename it PB99IMG.ZIP and putting it at the root of our own SD card. No luck.
Then i tried to put the update.zip (CWM file) with the hope that I could then load recovery. Also no luck.
Also tried to plug in USB cable, so that I could maybe wipe phone and install a new RUU. USB was recognized in Hboot (HBOOT USB PLUG status), but no access gained on the computer. I have manually installed drivers.
My friend lives a bit far away. So is there a way I can solve this without his SD card?
Thanks in advance!
- Rasmus, Denmark
Please send the bootloader info.
Sent from my customized HTC Desire using TTP
when you run a RUU bot into FASTBOOT USB. Turn it off and then hold BACK and POWER. then run the RUU.
need more help check my guide.
davebugyi > I hope this is the info you need :
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.10.05.23
Aug 10 2010, 17:52.18
bortak> Awesome guide, will check it out right away!
Okay, so now i followed bortaks guide. Created a gold card, downloaded latest recommended RUU, and then ran it while connected with fastboot usb.
At first i had problems when the RUU rebooted the bootloader. The phone shut down and disconnected instead of rebooting. Tried a few times, and finally got the installation to move on by keeping the phone "alive" through pressing vol buttons -although with a black screen.
But by 29%, while updating radio, the installation froze. After some time i unplugged USB and let the installation fail. So now I'm stuck with the four triangles with exclamation marks. I can run the RUU again and again, but it keeps freezing at various stages of installation.
What to do? It's not bricked, so there must be hope?
Can I take a different approach? Through ADB perhaps?
Thanks again!
RUU installation keeps freezing on my pc! Tried to click vol button to perhaps keep the phone "alive", but then I got error 155
Can't seem to find anything on Google about RUU installs that freezes - do any of you know what to do? Can't I use ADB or anything to flash the ROM?
evilution.dk said:
Okay, so now i followed bortaks guide. Created a gold card, downloaded latest recommended RUU, and then ran it while connected with fastboot usb.
At first i had problems when the RUU rebooted the bootloader. The phone shut down and disconnected instead of rebooting. Tried a few times, and finally got the installation to move on by keeping the phone "alive" through pressing vol buttons -although with a black screen.
But by 29%, while updating radio, the installation froze. After some time i unplugged USB and let the installation fail. So now I'm stuck with the four triangles with exclamation marks. I can run the RUU again and again, but it keeps freezing at various stages of installation.
What to do? It's not bricked, so there must be hope?
Can I take a different approach? Through ADB perhaps?
Thanks again!
Click to expand...
Click to collapse
oooh dear you shouldnt have disconnected it whist it was updating the radio.
i fear you may now have a radio brick
So I can have bricked the radio - but the phone will still respond?
evilution.dk said:
So I can have bricked the radio - but the phone will still respond?
Click to expand...
Click to collapse
unfortunately yes, if you unplug the phone and turn it on, it should boot in RUU mode, at what point does it say FAIL! ?
if it is on the radio, then I'm afraid it's bricked.. if you managed to luck out somehow and it isn't, then you could try again.
When i turn it on, the black splash screen with exclamation marks comes on. If i try to turn it on with usb cable plugged in while running XP mode on virtual machine, i see the white screen with version informations. But it only says RUU with an orange background.
Tried to install the new Gingerbread RUU from the HTC hp, but it still freezes. Think I'm out of luck
hmm... stick your phone in the freezer (in a plastic bag) for 5-10 minutes then try again.
I know it may sound strange.. but it may be overheating or something.
Whoever you borrowed this from will not be happy haha
Sent from my HTC Desire using XDA App
Which RUU are you trying to install?
I had the same issue when I realised I was trying to install a 2.1 RUU on my desire which was a bit silly, I had identical problems. used the correct 2.2 RUU and all ok
voodooboy3000 - Was trying to install official 2.3 Gingerbread RUU.
elliottg61 - It was crashing all the time when he had it, so he said i could have it if I could fix it. I couldn't
I would give the original firmware a go and get it back to stock. was it originally locked to a specific provider? if not use this RUU
http://forum.xda-developers.com/showthread.php?t=869048
Your not even s-off. How did he use anything to root. Granted my experience is with the bravoC. The GSM I'm sure is different. I would find the newest ruu available and try to flash that from hboot. If it takes forever go away. Don't touch it. Don't unplug it. Don't do anything till its done. If it wont flash after 30 minutes your screwed I think. U can try it over again. But if u have an official ruu it should flash no problem. If it gonna flash.
Try flashing a shooter port on the og evo, or flash a rom on the shooter. It can seem to hang on you for a while but it just takes time.
Edit: try this just rename it and stick on root of SD card and boot phone with volume down and power and then leave it be.
http://www.filefactory.com/file/b4a4027/n/RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Sent from my PG86100 using XDA Premium App
evilution.dk said:
voodooboy3000 - Was trying to install official 2.3 Gingerbread RUU.
elliottg61 - It was crashing all the time when he had it, so he said i could have it if I could fix it. I couldn't
Click to expand...
Click to collapse
hahahahaha! gave you your first thanks because that made me laugh
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
i_cs_u said:
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
Click to expand...
Click to collapse
plug the phone in then turn it on, tell us what it says
bortak said:
plug the phone in then turn it on, tell us what it says
Click to expand...
Click to collapse
It doesn`t say anything.
This is what I do:
1. Take the battery out.
2. Put the battery back in place
3. Try turning phone on using: Volume-down+Power -> the phone doesn`t show anything, it simply takes me to the HTC logo(white HTC logo on black background. It does the same thing if I turn it on using BACK+Power)
If I try running the RUU again, the installer gives me the next message: Error[152]: image update error.
From what I`ve read, this is a radio error which can only be fixed by hTC. Could that be true?
Also, after the RUU gives me the above error, if I unplug the USB cable, the phone shows following:
*************
RUU
Radio_V2 - OK
Splash1 - OK
Recovery - OK
Splash2 - OK
Radio_cust - OK
Bootloader - Bypassed
Userdata - OK
System - Fail-PU
Boot - OK
Partition update fail!
Update fail!
*************
I have the Alpharev CM7 r2 bootloader.
even if it is its covered by htc warranty so don't worry about it
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
i_cs_u said:
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
Click to expand...
Click to collapse
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Yes, I`m still S-OFF.
How do I flash them if I can`t access recovery using Volume-down+Power or BACK+Power?
I`ve downloaded the first one, renamed it into PB99IMG.zip, put it on root of SD CARD, turned phone ON and it takes me to the same htc logo screen as before.
LE
Tried with Android Flasher, but it gets stuck when trying to flash the bravo_alphaspl.img that u`ve given me.
So basically, I can`t enter Clockworkmod, I can`t enter the bootloader menu by turning on phone usine Volume-down+Power / Back+Power, and the phone is stuck in the HTC logo, while still S-OFF-ed, also the 2.3.3 official RUU gives me the error at the end of the installing process.
Does anyone have any idea what I could do?
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
i_cs_u said:
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
Click to expand...
Click to collapse
Haha it's cool dude but if I ever visit I may holla at you for some of those beers though
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Flash bravo_downgrade.img and then the RUU.
Holabalola said:
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Click to expand...
Click to collapse
bootloader/hboot/spl
Nevermind, I got it to work
So write how to help others and if we helped you, use the thanks-button.
bortak said:
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Click to expand...
Click to collapse
Thanks for this. Returning desire tomorrow (switching networks) and forgot to resize and downgrade hboot before running ruu. Good job I ran into this thread for a reminder!
hey, i have a same problem as i_cs_u and dont know how to solve it, can someone give me explained proces?
Did you read the whole thread????
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
HTC_Desire_luka__ said:
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
Click to expand...
Click to collapse
He probably figured out that he has to use the fastboot flash boot *name of img* command or Android Flasher on that screen with the 4 ! At the corner instead of renaming to PB99IMG and attempting to flash it on the phone.
Sent from my HTC Original Desire with Android 4.0.1 ICS using Tapatalk
but i dont know how to do it from fastboot. i need an explaination of the process.
hello
after sending it to the repair because it was not able to turn on, my htc desire now boots again but stucks on htc black screen with /!\ In every corner, when i put it on pc via usb and pull it this message appears:
repaired by ORT
BRAVO PVT1 SHIP S-OFF
HBOOT- 6.93.1002
MICROP-031d
TOUCH PANEK-SYNT0101
RADIO-5.11.05.27
so help me please what can i do to repair it myself ? i tought a S-OFF desire is easy to be repaired so i wish it's true !
thank you
Nevermind. Still learning.
/!\ in 4 corners means its pretty much ruu mode. So ul need to flash a ruu.
Try this first, Because ur s-off pull the battery out and put back in then press and hold back button then press and hold power button (so both same time) and see what comes up. Either it will boot into fastboot normaly, or boot into fastboot but with ruu in pink or it will just display the /!\ again.
Ps: jordyNL, its not radio brick, just ruu mode.
JordyNL said:
Nevermind. Still learning.
Click to expand...
Click to collapse
i tried to press return and power on buttons but it boots with the same black screen with 4 triangles !! so what should i do !! i'm scared to flash it with RUU i think it will be S-ON if i flash it with a RUU directly
the reply is for jmcclue
chegue4 said:
i tried to press return and power on buttons but it boots with the same black screen with 4 triangles !! so what should i do !! i'm scared to flash it with RUU i think it will be S-ON if i flash it with a RUU directly
Click to expand...
Click to collapse
What is your aim, I assume you still want a custom ROM?
So you can't boot into bootloader (Volume down + power) or fastboot (Back + power) at all? If you can get to either of these you can flash a new recovery through fastboot, then full wipe and install a ROM like before.
Otherwise I think you will need to flash RUU as advised, find the 2.3.3. GB RUU, don't be scared of flashing it. Yes if you do it correctly you will make it S-ON...but you can always S-OFF again, just like you got it S-OFF in the first place
i want any ROM that makes it work, and i tried both things " back + power" & "volume down+ power" but it still boots with 4 triangles, and also i don't want to make it S-ON because i don't know how to make it S-OFF again cuz it can't boot in fastboot or recovery ! that's the problem !
chegue4 said:
i want any ROM that makes it work, and i tried both things " back + power" & "volume down+ power" but it still boots with 4 triangles, and also i don't want to make it S-ON because i don't know how to make it S-OFF again cuz it can't boot in fastboot or recovery ! that's the problem !
Click to expand...
Click to collapse
Again, don't worry about that. Once you flash the RUU everything will be reset as normal, that's the whole point.
You have two options:
- Do nothing, try all button combinations and keep seeing those 4 triangles...
- Flash the RUU to get it booting. It's the first step in making anything work. I assure you that you can S-OFF once again...
Your choice
okay but how S-OFF again ? and what RUU should i choose ??
Like posted above, use the 2.3gb upgrade. Then to s-off after that use revolutionary. It will s-off ur phone in 2 mins, its really simple.
but the problem in revolutionary is that always when i run it it says "waiting for device" and never detects my device i don't know why !!! and about 2.3GB ruu can u send me the link ?? and should i look for the radio version for every RUU i try to use ?? i wish you answer all this questions plz !! i'm sorry for all that
I'm on phone right now, can't find links as easy, but I promise if you use the internet you'll find what you're looking for...applies to most things actually
As for revolutionary, likely you didn't follow a guide and didn't install the correct hboot drivers? Again find the drivers and a (video) guide by searching.
chegue4 said:
but the problem in revolutionary is that always when i run it it says "waiting for device" and never detects my device i don't know why !!! and about 2.3GB ruu can u send me the link ?? and should i look for the radio version for every RUU i try to use ?? i wish you answer all this questions plz !! i'm sorry for all that
Click to expand...
Click to collapse
if u click the troubleshooting guide by bortak in my sig then ul find 2.3gb ruu there, in resources. and like eddie said u prob dont have the drivers installed, thats why u get the "waiting for device"
i tried to boot it via the command "fastboot oem boot", it boots with white screen and green HTC logo, and vibrates 7 times and then returns to the black triangles screen ! what does it mean ??
also i want to know more about fasboot commands and how to use them, and if can i S-OFF it again with fastboot commands if the RUU doesn't work ! because revolutionary still can't find my phone and the drivers are installed correctly !
chegue4 said:
i tried to boot it via the command "fastboot oem boot", it boots with white screen and green HTC logo, and vibrates 7 times and then returns to the black triangles screen ! what does it mean ??
also i want to know more about fasboot commands and how to use them, and if can i S-OFF it again with fastboot commands if the RUU doesn't work ! because revolutionary still can't find my phone and the drivers are installed correctly !
Click to expand...
Click to collapse
Vibrates 7 times usually means hardware problem. U can only s-off if the phone is working/booting. Where did u send it for repair? Coz they obviously didnt fix it
chegue4 said:
i tried to boot it via the command "fastboot oem boot", it boots with white screen and green HTC logo, and vibrates 7 times and then returns to the black triangles screen ! what does it mean ??
also i want to know more about fasboot commands and how to use them, and if can i S-OFF it again with fastboot commands if the RUU doesn't work ! because revolutionary still can't find my phone and the drivers are installed correctly !
Click to expand...
Click to collapse
The 7 vibrations may indicate hardware failure unfortunately.
However one step at a time...Have you looked the troubleshooting guide?
Have you actually tried running the RUU yet?
You need to get the phone booting properly first. Revolutionary runs when the phone is booted into the OS I believe, not from bootloader.
Which drivers did you install? These are not the same ones when you install htc sync.
You should learn fastboot anyway, again find a guide. You can't s-off the desire with fastboot though.
i sent it to repair in my country ! algeria, it was on bad situation " doesn't boot at all nor charge, like dead phone" so he worked on it i think he does ORT jtag to boot it again, but still on 4 triangles !! so it's sure hardware problem ?? can't be fixed without changing a motherboard ?!
eddiehk6 said:
The 7 vibrations may indicate hardware failure unfortunately.
However one step at a time...Have you looked the troubleshooting guide?
Have you actually tried running the RUU yet?
You need to get the phone booting properly first. Revolutionary runs when the phone is booted into the OS I believe, not from bootloader.
Which drivers did you install? These are not the same ones when you install htc sync.
You should learn fastboot anyway, again find a guide. You can't s-off the desire with fastboot though.
Click to expand...
Click to collapse
i uninstalled htc sync, and installed drivers called " android usb drivers" ! and in my computer indicates "my htc" when i plug it on pc
chegue4 said:
i uninstalled htc sync, and installed drivers called " android usb drivers" ! and in my computer indicates "my htc" when i plug it on pc
Click to expand...
Click to collapse
...Have you tried running the RUU yet.....?
After you get it booting, then you will need to find and install the modified hboot drivers (not normal android usb drivers). Search for a specific revolutionary guide to explain it. The link is also on the revolutionary faq page
if i can boot it it means the problem is solved !! so about the RUU i tried several times before getting it S-OFF !! so it was S-ON and i tried a lot of RUU's and always problem with RADIO it can't flash it !!