Let me see if I can explain.
I was running Opendesire 4.0.15 (had been rooted using Revoked on a Mac).
I had modified the recovery using Revoked using amon-ra's ps3 image so I have no proper recovery.
I notices using OD Updater that OD 4.0.16 was available, downloaded that and let it flash it itself.
Now the phone doesn't boot properly, I get the O2 splash screen then what looks like a dark grey screen with very thin vertical coloured bands then back to O2 splash.
It occasionally show the Android screen but not much else.
Once it got to the setup screen with the Touch Android to begin picture and the animated finger. However there was a FC on screen and the touchscreen didn't work, so I couldn't progress.
I can get into fast boot and even the modified recovery but I can't see what to do to get a rom onto it or get it to boot up so I can re revoke it for a proper recovery.
It seems if I leave it long enough it gets to the setup screen but no touch screen working. Then it re-boots.
Can anyone suggest how to get a proper recovery file on at least??
Any help gratefully received.
Edit
From Hboot I can see
BRAVO PVT3 SHIP S-ON
HBOOT-0.83.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.10.05.17_2
Jun 10 2010,12.12.05
So it's an SLCD then?
Please help I can't afford another phone.
Thank you.
I can see the device from fastboot, (fastboot devices lists it by it's serial number)
is there any way for get either a new rom or even just recovery onto it from this commandline?
Anyone?
Please
this is what I get, any clues?
c:\android-sdk-windows\tools>fastboot flash system od.zip
sending 'system' (65463 KB)... OKAY [ 11.219s]
writing 'system'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 20.547s
RUU see's it, (when I have it in bootloader) but when it runs through and reboots the phone, the phone sticks on an H T C screen and the pc is counting looking for bootloader but never sees it.
OK, got the HTC screen, unplugged USB, plugged it back in, ran RUU again, started uploading, green bar moving across screen, then it rebooted, waiting for bootloader, RUU then failed, black screen on phone now, no bootloader, no splashscreen nothing.
It vibrates if I hold power button, it doesn't if I hold back button or VOL down with power button.
Now it's dead.
lininjim said:
RUU see's it, (when I have it in bootloader) but when it runs through and reboots the phone, the phone sticks on an H T C screen and the pc is counting looking for bootloader but never sees it.
OK, got the HTC screen, unplugged USB, plugged it back in, ran RUU again, started uploading, green bar moving across screen, then it rebooted, waiting for bootloader, RUU then failed, black screen on phone now, no bootloader, no splashscreen nothing.
It vibrates if I hold power button, it doesn't if I hold back button or VOL down with power button.
Now it's dead.
Click to expand...
Click to collapse
what RUU did you flash it with?
sounds like you flashed it with a pre slcd screen RUU
the only O2 one I could find on here
RUU_Brav2_UK_1.20.207.1_Radio_32.36.00.28U_4.06.00.02_2_release_124865.exe
Now I can still get bootloader / fastboot working, I see it in my device manager and the fastboot command sees it again, is there anything I can do from there?
(damn thing is only 3 weeks old).
Thanks for reply btw
Managed to get a newer Froyo RUU to run to the same stage as I had before so now got a display back , hBoot 093 still for the borked recovery
is there anything I can do other than send it back to HTC?
thanks for reading, really really stuck here.
with files on sd card (pb999.img etc) it now checks those then says CID incorrect
where is it getting stuck now?
is this a branded device? (if unbranded was it branded before)
what did you flash it with?
Is your gold card present?
what os are you using to flash it?
Have you tried using the downgrade utility to flash it back to a version of 2.1? http://forum.xda-developers.com/showthread.php?t=768256
Hello again )
ok it now just goes to the white screen with the 3 androids skateboarding I have have hboot or fastboot, I don't know the significance of those.
if I select recovery it goes to amonra's poc-psfreedom so I can't even reflash it from there
it was originally an O2 UK phone so has the O2 bubbles on screen
I don't have a gold card :i(
I run a mac but I have installed xp on bootcamp to try to resolve this.
I can see the phone is device manager as Android USB Device - My HTC
It boots to the white screen now when I plug in the usb cable
it had been running happily on OpenDesire 4.0.15 with no problem, but when I called the updater to bring it to 4.0.16 it turned into this mess.
the downgrade utility requires a gold card doesn't it? I don't have one (
edit - more info
the RUU file I have tried again is
RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed.exe
it tells me it will go from image version 1.20.207.3
to image version 2.14.207.1
it starts and brings a black screen onto the phone with HTC on it, starts working then fails with erroe 171 usb connection error. (perhaps I need a different usb driver installed?)
edit again - if I unplug the usb cable I get the white screen but only RUU but pull battery and get fastboot hboot back
Hold the press
I think I've recovered it now.
Using that RUU, everytime it stalled out and said waiting for bootloader I tapped the power button and it continued, flashed the whole thing now I seem to have an official O2 Froyo!
Thanks for your input mate.
i dont know how you uninstall that psfreedom stuff, people should just buy the dongle and not risk bricking their mobile phones.
Try intalling the latest version of htc sync or use a pure windows pc rather than bootcamp see if that rectifies it.
its not hard to create a goldcard if you have a microsd slot, I do recommend you make one using the tool from modaco. and try using the downgrader. it could be that the psnation tool is conflicting the the bootloader now its .93
EDIT: was on a call mid type and posted this while you have replied.
Glad its sorted
It's sorted now, thank you.
Dongle is in the post mate.
I really appreciate your input there, I was feeling kinda lonely!
Now it's on what appears to be O2 official Froyo, means no root, DOH!
Cheers fella.
you can use the downgrader tool to downgrade hboot and firware.
then you can root and flash a rooted 2.2 405 rom like the one teppic made
it would then be on the latest 2.2 for EU and be rooted with a compatible hboot
im on hboot 93, im waiting for unrevoked. they seem to be taking an age
You are a genius, I'll have a play tonight.
Thanks mate. - SUPERSTAR -
lininjim said:
I think I've recovered it now.
Using that RUU, everytime it stalled out and said waiting for bootloader I tapped the power button and it continued, flashed the whole thing now I seem to have an official O2 Froyo!
Thanks for your input mate.
Click to expand...
Click to collapse
Hi lininjim ,
I have the same issue as you mention. i get to hboo screen and nothing works beyond that. how did you get your phone to recognize with RUU. coz mine just stays in htc logo and RUU does not recognize it at all...
Vinod
1. Posting in a thread that's one year old is not very useful.
2. Look in troubleshooting guide.
Sorry to say it worked exactly as I posted mate and I got rid of the Android phones back in March.
Sorry I can't help.
Related
Hoping someone can help me with this.
Ive been searching around various forums and such and the level of info is slightly overwhelming. Im kinda at at loss of which
route to go down. However most of what i have tried has not worked.
I have an HTC Desire, it was origanally running on orange. However, i unbranded it and unlocked it then installed a stock
HTC rom. Eventually updated to Froyo. This was done some time ago and i really dont remember what steps i took.
The Phone has been running fine with no issues, reboots or lockups at all. I had been using a "Three" sim and running fine for months.
I was playing "Angry Birds" (damn addictive game) with the charger plugged in an charging when the phone rebooted and got stuck on the HTC
Boot logo screen.
Im totally unable to boot into android and alas cant access the system.
It seems im unable to access adb in anyway but i seem to be able to run fastboot commands somewhat successfully.
I have no real way to access the SD card, i have no micro sd card convertor and i guess i cant access it if i cant boot into
android?
The only real info i can provide is from the Power+Back Screen:
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNTH0101
RADIO-5.09.05.30_2
Aug 10 2010, 17:52:18
Unfortunately i bought this phone on ebay, so i cant send it back to orange (it was someones contract replacement, and uneeded)
Having read around it seems that HBOOT 93 and SHIP S-ON pretty much makes this unrecoverable?
Any assistance would be GREATLY appreciated!
Thanks in advance
*Update*
Partly answered my own question. Seems im able to add items to the sd card via fastboot flash /sdcard/ filename
However still not sure what files to add
could you boot into the recovery?
in fastboot mode, use vol down and power button to select.
h3llb3nd4 said:
could you boot into the recovery?
in fastboot mode, use vol down and power button to select.
Click to expand...
Click to collapse
Yes, however upon pressing recovery it goes back to the HTC Boot Logo.
Bumping this for my sanity.
have you tried flashing a PB99IMG.zip?
Ive tried sending a few PB99IMG files via fastboot flash /sdcard/ PB99IMG.zip
The file seems to send fine and i can see the progress bar on the fastboot interface on the phone. However i always get a message back about the signature being wrong. Perhaps as a result of the wrong PB file?
your phone crashing without you doing anything except gaming could indicate an hardware issue.
anyways, first of all, going to htc boot logo when choosing recovery is pretty normal - it takes about 20 seconds until recovery is started.
if it doesnt start after that time, your internal data is bugged. install one of those RUU roms, to bring back you phone to factory default os. you have to root it again afterwards, but it should restore a working system.
there are a lot of other ways to restore your phone, but try these first
Murdock thanks for the advice. I had previously tried a a few RUU's however it would never let me install a version older than i already had.
I also had a fair few niggles getting the PC to recognise my phone during RUU install.
I got around this by using the older version of HTC sync which worked great (v 2.0.40)
After searching around i managed to find:
RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed.exe
This worked fine and currently the phone is working. However, it has rebooted itself once. I can only hope it stays stable as ive no idea about persistant boot issues.
If anyone is interested in the older version og HTC Sync or the Froyo RUU i shall be happy to upload them
Yesterday the problem started with boot loops. I took the SD CARD out and teh boot loop stopped and rebooted fine.
So i went to gparted and cleaned ext3 and deleted all files in fat except clockwork folder
then i did a nandroid restore and everyhting was fine till today
Today in the middle o the game pool break demo it shut down
no more boot loop just stuck at htc logo
bootloader works fine
but when i go to my clockword recovery, same thin, get stuck at htc logo
phone is unbranded
what can i do now?
i took out sd card like last time and booted still stuck at htc logo
bootloader works though
Since clockwork mode do not work i dont know how i can recover the phone.
is it possible to do some recovery with usb cable and android SDK?
Please Help
Edit: Will pay £5 to the person who helped me sort it out.
i don't suppose that you are S-off. if not boot in hboot by shutting down the phone(or removing the battery). press volume down+power on. go to 3d option which says "clear storage", press power on. confirm via power up. let it do it's thing.
report back.
txitxi2004 said:
Yesterday the problem started with boot loops. I took the SD CARD out and teh boot loop stopped and rebooted fine.
So i went to gparted and cleaned ext3 and deleted all files in fat except clockwork folder
then i did a nandroid restore and everyhting was fine till today
Today in the middle o the game pool break demo it shut down
no more boot loop just stuck at htc logo
bootloader works fine
but when i go to my clockword recovery, same thin, get stuck at htc logo
phone is unbranded
what can i do now?
i took out sd card like last time and booted still stuck at htc logo
bootloader works though
Since clockwork mode do not work i dont know how i can recover the phone.
is it possible to do some recovery with usb cable and android SDK?
Please Help
Edit: Will pay £5 to the person who helped me sort it out.
Click to expand...
Click to collapse
mariosraptor said:
i don't suppose that you are S-off. if not boot in hboot by shutting down the phone(or removing the battery). press volume down+power on. go to 3d option which says "clear storage", press power on. confirm via power up. let it do it's thing.
report back.
Click to expand...
Click to collapse
just cleared the storage. problem stands
clear.
done...
Reboot in 5 seconds
which part of the phone gets cleared with this method. It was incredibly fast like 2 seconds to clear it.
Phone rebooted still stuck on HTC logo
i am afraid that you will have to restore your desire to factory settings via PB method or RUU.
can you post details of your phone like radio, firmware, locked-unlocked, branded-unbranded etc?
mariosraptor said:
i am afraid that you will have to restore your desire to factory settings via PB method or RUU.
can you post details of your phone like radio, firmware, locked-unlocked, branded-unbranded etc?
Click to expand...
Click to collapse
Does factory restore make my phone loose its root?
ROM: LeeDrOiD Mod V1.8c
Firmware version: 2.2 | Build: 2.09.405.8 CL218634-release-keys
Kernel: 2.6.32.15 | Radio: 32.43.00.32U_5.09.00.20
HBOOT: 0.80.0000
Recovery:ClockworkMod
clockwork version is the latest which is .7. cant remember the beginning numbers
its unlocked/unbranded
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
download and flash in fastboot mode
mariosraptor said:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
download and flash in fastboot mode
Click to expand...
Click to collapse
Downloading but how do i flash this?
would i loose my root?
what is fastboot mode?
also what hboot version does this have?
fastboot mode= vol down+power on after that select fastboot by pressing power on.
yes you will loose root, but can always use unrevoked.
093.0001
txitxi2004 said:
Downloading but how do i flash this?
would i loose my root?
what is fastboot mode?
also what hboot version does this have?
Click to expand...
Click to collapse
Ok i just read on another thread.
Fast boot is press back button and power on. I can see Fastboot in red written
Volume down i cant see Fastboot written. IT says hboot.
so i am installing htc sync 3.0 now
once installed
-i trun phone using back button into fastboot mode
- plug usb cable
- run the ex u gave me
So you sure hboot 0.93 can be rooted with unrevoked.
Last time i had 0.83 and i had to do crazy things to go back to 0.80 so i could root
yes i'm sure
txitxi2004 said:
Ok i just read on another thread.
Fast boot is press back button and power on. I can see Fastboot in red written
Volume down i cant see Fastboot written. IT says hboot.
so i am installing htc sync 3.0 now
once installed
-i trun phone using back button into fastboot mode
- plug usb cable
- run the ex u gave me
So you sure hboot 0.93 can be rooted with unrevoked.
Last time i had 0.83 and i had to do crazy things to go back to 0.80 so i could root
Click to expand...
Click to collapse
Some driver problems with windows 7
it decides to install a version of windows driver ratehr than htc
phone is detected which is good i guess
i am moving to my win xp pc which make more sense to me
hold on
HTC sync 3.0 cant find my devices although windows can detect there a htc deviec plugged in and installed a MYHTC driver from what i can see in device manager
trying to install htc sync 2.0 which have worked before for me
Sorry i forgot to ask this will be fine on AMOLED ??
NO
you need fastboot drivers installed http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
txitxi2004 said:
HTC sync 3.0 cant find my devices although windows can detect there a htc deviec plugged in and installed a MYHTC driver from what i can see in device manager
trying to install htc sync 2.0 which have worked before for me
Click to expand...
Click to collapse
also install htc sync then remove it w/o removing the drivers
currenly it says a fast boot driver is installed (from deviec manager on win 7). htc sync cant see the phone
i ran RUU it can find the phone
now i am going throught the setup
its says
from image version
1.15.405.3
to image version
2.29.405.2
does AMOLED effect any of this?
does that version number look ok to you?
if it can find my version number that driver looks ok
no the first version does not look right it looks 2.1 android. amoled does not affect anything. this is the last WWE unbranded. nothing else that i can say.
txitxi2004 said:
currenly it says a fast boot driver is installed (from deviec manager on win 7). htc sync cant see the phone
i ran RUU it can find the phone
now i am going throught the setup
its says
from image version
1.15.405.3
to image version
2.29.405.2
does AMOLED effect any of this?
does that version number look ok to you?
Click to expand...
Click to collapse
Its going through the process now. I think it is ok.
i can see green bar prgoress bar on phone
on pc side another progrss bar updating ROM it says
fingers-crossed. report back.
txitxi2004 said:
Its going through the process now. I think it is ok.
i can see green bar prgoress bar on phone
on pc side another progrss bar updating ROM it says
Click to expand...
Click to collapse
its says congratiolation and rom upgraded succesffully
boot looping
woah hang on upgarde logo
wihtout sim i can see desktop
with sim it keep boot looping..hang on trying to see whats happening
Ye its working now. I think the boot loops were part of new roms setting itself up
current Setting
Hboot: 0.93.0001
radio 5.11.05.27
Froyo
PM me you paypal so i can send the donation
sorry admins and pro i have all most posts regarding boot loop and red triangle nothing help hence this.
i have or had rooted desire running oxygen rom, i reflashed it with froyo t mobile rom which went ok and then received up date which i installed through recovery and the phone rebooted and since then it has kept rebooting every min intervals it just gets to white htc screen and hangs for a min and reboots. also when i try to go into recovery i get red triangle i have tried useing fake-flash which gets to about 10% and aborts with virfication failer. i have done hard reset and formated the sdc with fat 32 nothing help's.
bravo pvt3 ship s-on
hboot 0.93.0001
radio-5.11.05.27
this forum has help,d me with rooting and finding good rom for my phone
hop fully some can help me again with this problem
thanks
The red triangle in recovery is the stock recovery. You can press the power button to bring up the menu but it is useless. You can create a goldcard to bypass the verification. Just flash the rom again and see if it went ok.
GoogleJelly said:
The red triangle in recovery is the stock recovery. You can press the power button to bring up the menu but it is useless. You can create a goldcard to bypass the verification. Just flash the rom again and see if it went ok.
Click to expand...
Click to collapse
GoogleJelly.
From what i can understand about gold cards is i need to plug my phone into the computer and mount sdc. I can not connect my to computer due constant rebooting loop it is stuck in.
Never apply UTA updates on rooted phones. It's been a while since the last.
Look up some stuff about RUU, there should be plenty old threads regarding this.
Sent from my HTC Desire using XDA App
I have tried the Ruu that i have on pc but the problem is that Ruu does not pick up the phone not fully rebooting also the dose not stay connected long for the ruu to detact and its magic.
update
i HAVE THE BLACK SCREEN OF DEATH as some ppl call it. thats the result of trying to run RUU from it could not find the boot loader
Up date
Found the correct Ruu file now the problem is that when i run the RUU it pick up the fone fine all the details are correct when i cliclk update it comes back with error 171 usb conection failed or some like that. I have installed usb drivers still get this problem i got the drivers from HTC SYNC.
Also i read in the forums that when running Ruu before flashing look a called ROM.zip on C drive i have looked in C drive program file's and found nothing could some one please point me in the right direction as to whr to find file on C drive.
Getting thr very slowly.
Thanks
Again for help
Hi!
First off, I've been searching for the answer all afternoon, but with no luck.
Here's the thing. My GF borrowed my friends old Desire, because her Legend broke.
When we tried to boot it up, it was stuck at the white HTC screen. So i entered Hboot and tried to use recovery with no luck. Recovery was also stuck at white screen.
My friend had removed his SD card before we borrowed the phone. Could that be the problem? Both me and my friend are pretty new to rooting/flashing. All the info he could give me, was that he was running some Modaco rom, and had used Unrevoked to root the phone.
I tried to download a Modaco rom and rename it PB99IMG.ZIP and putting it at the root of our own SD card. No luck.
Then i tried to put the update.zip (CWM file) with the hope that I could then load recovery. Also no luck.
Also tried to plug in USB cable, so that I could maybe wipe phone and install a new RUU. USB was recognized in Hboot (HBOOT USB PLUG status), but no access gained on the computer. I have manually installed drivers.
My friend lives a bit far away. So is there a way I can solve this without his SD card?
Thanks in advance!
- Rasmus, Denmark
Please send the bootloader info.
Sent from my customized HTC Desire using TTP
when you run a RUU bot into FASTBOOT USB. Turn it off and then hold BACK and POWER. then run the RUU.
need more help check my guide.
davebugyi > I hope this is the info you need :
BRAVO PVT1 SHIP S-ON
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.10.05.23
Aug 10 2010, 17:52.18
bortak> Awesome guide, will check it out right away!
Okay, so now i followed bortaks guide. Created a gold card, downloaded latest recommended RUU, and then ran it while connected with fastboot usb.
At first i had problems when the RUU rebooted the bootloader. The phone shut down and disconnected instead of rebooting. Tried a few times, and finally got the installation to move on by keeping the phone "alive" through pressing vol buttons -although with a black screen.
But by 29%, while updating radio, the installation froze. After some time i unplugged USB and let the installation fail. So now I'm stuck with the four triangles with exclamation marks. I can run the RUU again and again, but it keeps freezing at various stages of installation.
What to do? It's not bricked, so there must be hope?
Can I take a different approach? Through ADB perhaps?
Thanks again!
RUU installation keeps freezing on my pc! Tried to click vol button to perhaps keep the phone "alive", but then I got error 155
Can't seem to find anything on Google about RUU installs that freezes - do any of you know what to do? Can't I use ADB or anything to flash the ROM?
evilution.dk said:
Okay, so now i followed bortaks guide. Created a gold card, downloaded latest recommended RUU, and then ran it while connected with fastboot usb.
At first i had problems when the RUU rebooted the bootloader. The phone shut down and disconnected instead of rebooting. Tried a few times, and finally got the installation to move on by keeping the phone "alive" through pressing vol buttons -although with a black screen.
But by 29%, while updating radio, the installation froze. After some time i unplugged USB and let the installation fail. So now I'm stuck with the four triangles with exclamation marks. I can run the RUU again and again, but it keeps freezing at various stages of installation.
What to do? It's not bricked, so there must be hope?
Can I take a different approach? Through ADB perhaps?
Thanks again!
Click to expand...
Click to collapse
oooh dear you shouldnt have disconnected it whist it was updating the radio.
i fear you may now have a radio brick
So I can have bricked the radio - but the phone will still respond?
evilution.dk said:
So I can have bricked the radio - but the phone will still respond?
Click to expand...
Click to collapse
unfortunately yes, if you unplug the phone and turn it on, it should boot in RUU mode, at what point does it say FAIL! ?
if it is on the radio, then I'm afraid it's bricked.. if you managed to luck out somehow and it isn't, then you could try again.
When i turn it on, the black splash screen with exclamation marks comes on. If i try to turn it on with usb cable plugged in while running XP mode on virtual machine, i see the white screen with version informations. But it only says RUU with an orange background.
Tried to install the new Gingerbread RUU from the HTC hp, but it still freezes. Think I'm out of luck
hmm... stick your phone in the freezer (in a plastic bag) for 5-10 minutes then try again.
I know it may sound strange.. but it may be overheating or something.
Whoever you borrowed this from will not be happy haha
Sent from my HTC Desire using XDA App
Which RUU are you trying to install?
I had the same issue when I realised I was trying to install a 2.1 RUU on my desire which was a bit silly, I had identical problems. used the correct 2.2 RUU and all ok
voodooboy3000 - Was trying to install official 2.3 Gingerbread RUU.
elliottg61 - It was crashing all the time when he had it, so he said i could have it if I could fix it. I couldn't
I would give the original firmware a go and get it back to stock. was it originally locked to a specific provider? if not use this RUU
http://forum.xda-developers.com/showthread.php?t=869048
Your not even s-off. How did he use anything to root. Granted my experience is with the bravoC. The GSM I'm sure is different. I would find the newest ruu available and try to flash that from hboot. If it takes forever go away. Don't touch it. Don't unplug it. Don't do anything till its done. If it wont flash after 30 minutes your screwed I think. U can try it over again. But if u have an official ruu it should flash no problem. If it gonna flash.
Try flashing a shooter port on the og evo, or flash a rom on the shooter. It can seem to hang on you for a while but it just takes time.
Edit: try this just rename it and stick on root of SD card and boot phone with volume down and power and then leave it be.
http://www.filefactory.com/file/b4a4027/n/RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
Sent from my PG86100 using XDA Premium App
evilution.dk said:
voodooboy3000 - Was trying to install official 2.3 Gingerbread RUU.
elliottg61 - It was crashing all the time when he had it, so he said i could have it if I could fix it. I couldn't
Click to expand...
Click to collapse
hahahahaha! gave you your first thanks because that made me laugh
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
i_cs_u said:
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
Click to expand...
Click to collapse
plug the phone in then turn it on, tell us what it says
bortak said:
plug the phone in then turn it on, tell us what it says
Click to expand...
Click to collapse
It doesn`t say anything.
This is what I do:
1. Take the battery out.
2. Put the battery back in place
3. Try turning phone on using: Volume-down+Power -> the phone doesn`t show anything, it simply takes me to the HTC logo(white HTC logo on black background. It does the same thing if I turn it on using BACK+Power)
If I try running the RUU again, the installer gives me the next message: Error[152]: image update error.
From what I`ve read, this is a radio error which can only be fixed by hTC. Could that be true?
Also, after the RUU gives me the above error, if I unplug the USB cable, the phone shows following:
*************
RUU
Radio_V2 - OK
Splash1 - OK
Recovery - OK
Splash2 - OK
Radio_cust - OK
Bootloader - Bypassed
Userdata - OK
System - Fail-PU
Boot - OK
Partition update fail!
Update fail!
*************
I have the Alpharev CM7 r2 bootloader.
even if it is its covered by htc warranty so don't worry about it
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
i_cs_u said:
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
Click to expand...
Click to collapse
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Yes, I`m still S-OFF.
How do I flash them if I can`t access recovery using Volume-down+Power or BACK+Power?
I`ve downloaded the first one, renamed it into PB99IMG.zip, put it on root of SD CARD, turned phone ON and it takes me to the same htc logo screen as before.
LE
Tried with Android Flasher, but it gets stuck when trying to flash the bravo_alphaspl.img that u`ve given me.
So basically, I can`t enter Clockworkmod, I can`t enter the bootloader menu by turning on phone usine Volume-down+Power / Back+Power, and the phone is stuck in the HTC logo, while still S-OFF-ed, also the 2.3.3 official RUU gives me the error at the end of the installing process.
Does anyone have any idea what I could do?
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
i_cs_u said:
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
Click to expand...
Click to collapse
Haha it's cool dude but if I ever visit I may holla at you for some of those beers though
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Flash bravo_downgrade.img and then the RUU.
Holabalola said:
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Click to expand...
Click to collapse
bootloader/hboot/spl
Nevermind, I got it to work
So write how to help others and if we helped you, use the thanks-button.
bortak said:
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Click to expand...
Click to collapse
Thanks for this. Returning desire tomorrow (switching networks) and forgot to resize and downgrade hboot before running ruu. Good job I ran into this thread for a reminder!
hey, i have a same problem as i_cs_u and dont know how to solve it, can someone give me explained proces?
Did you read the whole thread????
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
HTC_Desire_luka__ said:
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
Click to expand...
Click to collapse
He probably figured out that he has to use the fastboot flash boot *name of img* command or Android Flasher on that screen with the 4 ! At the corner instead of renaming to PB99IMG and attempting to flash it on the phone.
Sent from my HTC Original Desire with Android 4.0.1 ICS using Tapatalk
but i dont know how to do it from fastboot. i need an explaination of the process.