Develop Bugs

[Q] I think I've bricked my Desire - HELP PLEASE

Let me see if I can explain.
I was running Opendesire 4.0.15 (had been rooted using Revoked on a Mac).
I had modified the recovery using Revoked using amon-ra's ps3 image so I have no proper recovery.
I notices using OD Updater that OD 4.0.16 was available, downloaded that and let it flash it itself.
Now the phone doesn't boot properly, I get the O2 splash screen then what looks like a dark grey screen with very thin vertical coloured bands then back to O2 splash.
It occasionally show the Android screen but not much else.
Once it got to the setup screen with the Touch Android to begin picture and the animated finger. However there was a FC on screen and the touchscreen didn't work, so I couldn't progress.
I can get into fast boot and even the modified recovery but I can't see what to do to get a rom onto it or get it to boot up so I can re revoke it for a proper recovery.
It seems if I leave it long enough it gets to the setup screen but no touch screen working. Then it re-boots.
Can anyone suggest how to get a proper recovery file on at least??
Any help gratefully received.
Edit
From Hboot I can see
BRAVO PVT3 SHIP S-ON
HBOOT-0.83.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.10.05.17_2
Jun 10 2010,12.12.05
So it's an SLCD then?
Please help I can't afford another phone.
Thank you.

I can see the device from fastboot, (fastboot devices lists it by it's serial number)
is there any way for get either a new rom or even just recovery onto it from this commandline?
Anyone?
Please

this is what I get, any clues?
c:\android-sdk-windows\tools>fastboot flash system od.zip
sending 'system' (65463 KB)... OKAY [ 11.219s]
writing 'system'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 20.547s

RUU see's it, (when I have it in bootloader) but when it runs through and reboots the phone, the phone sticks on an H T C screen and the pc is counting looking for bootloader but never sees it.
OK, got the HTC screen, unplugged USB, plugged it back in, ran RUU again, started uploading, green bar moving across screen, then it rebooted, waiting for bootloader, RUU then failed, black screen on phone now, no bootloader, no splashscreen nothing.
It vibrates if I hold power button, it doesn't if I hold back button or VOL down with power button.
Now it's dead.

lininjim said:
RUU see's it, (when I have it in bootloader) but when it runs through and reboots the phone, the phone sticks on an H T C screen and the pc is counting looking for bootloader but never sees it.
OK, got the HTC screen, unplugged USB, plugged it back in, ran RUU again, started uploading, green bar moving across screen, then it rebooted, waiting for bootloader, RUU then failed, black screen on phone now, no bootloader, no splashscreen nothing.
It vibrates if I hold power button, it doesn't if I hold back button or VOL down with power button.
Now it's dead.
Click to expand...
Click to collapse
what RUU did you flash it with?
sounds like you flashed it with a pre slcd screen RUU

the only O2 one I could find on here
RUU_Brav2_UK_1.20.207.1_Radio_32.36.00.28U_4.06.00.02_2_release_124865.exe
Now I can still get bootloader / fastboot working, I see it in my device manager and the fastboot command sees it again, is there anything I can do from there?
(damn thing is only 3 weeks old).
Thanks for reply btw

Managed to get a newer Froyo RUU to run to the same stage as I had before so now got a display back , hBoot 093 still for the borked recovery
is there anything I can do other than send it back to HTC?
thanks for reading, really really stuck here.
with files on sd card (pb999.img etc) it now checks those then says CID incorrect

where is it getting stuck now?
is this a branded device? (if unbranded was it branded before)
what did you flash it with?
Is your gold card present?
what os are you using to flash it?
Have you tried using the downgrade utility to flash it back to a version of 2.1? http://forum.xda-developers.com/showthread.php?t=768256

Hello again )
ok it now just goes to the white screen with the 3 androids skateboarding I have have hboot or fastboot, I don't know the significance of those.
if I select recovery it goes to amonra's poc-psfreedom so I can't even reflash it from there
it was originally an O2 UK phone so has the O2 bubbles on screen
I don't have a gold card :i(
I run a mac but I have installed xp on bootcamp to try to resolve this.
I can see the phone is device manager as Android USB Device - My HTC
It boots to the white screen now when I plug in the usb cable
it had been running happily on OpenDesire 4.0.15 with no problem, but when I called the updater to bring it to 4.0.16 it turned into this mess.
the downgrade utility requires a gold card doesn't it? I don't have one (
edit - more info
the RUU file I have tried again is
RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed.exe
it tells me it will go from image version 1.20.207.3
to image version 2.14.207.1
it starts and brings a black screen onto the phone with HTC on it, starts working then fails with erroe 171 usb connection error. (perhaps I need a different usb driver installed?)
edit again - if I unplug the usb cable I get the white screen but only RUU but pull battery and get fastboot hboot back

Hold the press
I think I've recovered it now.
Using that RUU, everytime it stalled out and said waiting for bootloader I tapped the power button and it continued, flashed the whole thing now I seem to have an official O2 Froyo!
Thanks for your input mate.

i dont know how you uninstall that psfreedom stuff, people should just buy the dongle and not risk bricking their mobile phones.
Try intalling the latest version of htc sync or use a pure windows pc rather than bootcamp see if that rectifies it.
its not hard to create a goldcard if you have a microsd slot, I do recommend you make one using the tool from modaco. and try using the downgrader. it could be that the psnation tool is conflicting the the bootloader now its .93
EDIT: was on a call mid type and posted this while you have replied.
Glad its sorted

It's sorted now, thank you.
Dongle is in the post mate.
I really appreciate your input there, I was feeling kinda lonely!
Now it's on what appears to be O2 official Froyo, means no root, DOH!
Cheers fella.

you can use the downgrader tool to downgrade hboot and firware.
then you can root and flash a rooted 2.2 405 rom like the one teppic made
it would then be on the latest 2.2 for EU and be rooted with a compatible hboot
im on hboot 93, im waiting for unrevoked. they seem to be taking an age

You are a genius, I'll have a play tonight.
Thanks mate. - SUPERSTAR -

lininjim said:
I think I've recovered it now.
Using that RUU, everytime it stalled out and said waiting for bootloader I tapped the power button and it continued, flashed the whole thing now I seem to have an official O2 Froyo!
Thanks for your input mate.
Click to expand...
Click to collapse
Hi lininjim ,
I have the same issue as you mention. i get to hboo screen and nothing works beyond that. how did you get your phone to recognize with RUU. coz mine just stays in htc logo and RUU does not recognize it at all...
Vinod

1. Posting in a thread that's one year old is not very useful.
2. Look in troubleshooting guide.

Sorry to say it worked exactly as I posted mate and I got rid of the Android phones back in March.
Sorry I can't help.

htc desire boot loop and recovery red triangle

sorry admins and pro i have all most posts regarding boot loop and red triangle nothing help hence this.
i have or had rooted desire running oxygen rom, i reflashed it with froyo t mobile rom which went ok and then received up date which i installed through recovery and the phone rebooted and since then it has kept rebooting every min intervals it just gets to white htc screen and hangs for a min and reboots. also when i try to go into recovery i get red triangle i have tried useing fake-flash which gets to about 10% and aborts with virfication failer. i have done hard reset and formated the sdc with fat 32 nothing help's.
bravo pvt3 ship s-on
hboot 0.93.0001
radio-5.11.05.27
this forum has help,d me with rooting and finding good rom for my phone
hop fully some can help me again with this problem
thanks

The red triangle in recovery is the stock recovery. You can press the power button to bring up the menu but it is useless. You can create a goldcard to bypass the verification. Just flash the rom again and see if it went ok.

GoogleJelly said:
The red triangle in recovery is the stock recovery. You can press the power button to bring up the menu but it is useless. You can create a goldcard to bypass the verification. Just flash the rom again and see if it went ok.
Click to expand...
Click to collapse
GoogleJelly.
From what i can understand about gold cards is i need to plug my phone into the computer and mount sdc. I can not connect my to computer due constant rebooting loop it is stuck in.

Never apply UTA updates on rooted phones. It's been a while since the last.
Look up some stuff about RUU, there should be plenty old threads regarding this.
Sent from my HTC Desire using XDA App

I have tried the Ruu that i have on pc but the problem is that Ruu does not pick up the phone not fully rebooting also the dose not stay connected long for the ruu to detact and its magic.
update
i HAVE THE BLACK SCREEN OF DEATH as some ppl call it. thats the result of trying to run RUU from it could not find the boot loader

Up date
Found the correct Ruu file now the problem is that when i run the RUU it pick up the fone fine all the details are correct when i cliclk update it comes back with error 171 usb conection failed or some like that. I have installed usb drivers still get this problem i got the drivers from HTC SYNC.
Also i read in the forums that when running Ruu before flashing look a called ROM.zip on C drive i have looked in C drive program file's and found nothing could some one please point me in the right direction as to whr to find file on C drive.
Getting thr very slowly.
Thanks
Again for help

Having random rebooting

Hi guys.
My EVO keeps rebooting by it self. I try to get to the recovery section but in boot loader when I chose the recovery, after restarting my phone keep rebooting again!! I don't know what should I do and actually I don't have insurance too.

Search the Evo dev forum for shipped roms and download the 3.70(latest update) rom and put it on the root of your sd card and rename it PC36IMG.zip(make sure it is not PC36IMG.zip.zip which is a common error). Then boot into bootloader and it will scan the sdcard for the PC36IMG and ask if you want to update. Select yes and let it do it's thing. It may reboot during the process and rescan the sdcard and then continue updating. This is normal. Do Not turn your phone off or pull the battery during the update. This will get you back to stock. From there you can reflash your recovery and then restore a nandroid backup, or flash any rom you want. Hope this helps.
Here is a megaupload link to the PC36IMG you need to download and place on the root of your sdcard: http://www.megaupload.com/?d=MUSAURP7

Hi. I did all those step but it didn't works. After updating my phone,it keeps rebooting again

misagh99 said:
Hi. I did all those step but it didn't works. After updating my phone,it keeps rebooting again
Click to expand...
Click to collapse
Can you get into the bootloader? (white screen....you get there by holding down the volumne down button while powering on the phone).
If so, please post what information you see there.

yes I can
supersonic evt2-3 ship s-on
hboot-2.10.0001
microp-041f
touch panel-atmel224_16ab
radio-2.15.00.11.19
oct 15 2010
tnx

I try it with diferent battery, it didn't work.

Well, "s" is on indicated that the phone is back to stock, which means you have no custom recovery on your phone to boot into.
Does your phone boot normally? If so, try unrooting it again.

but when my phone keep rebooting how could I check usb debugging and install recovery? when I turn on my phone the only thing I see is white screen sads evo 4g and after 2 secounds .. reboot again

I have similar problem like this guy has
http://www.youtube.com/watch?v=DUi3NFXSh78

Have you tried re-running an RUU?

no what dose that means? How could I do that?

Basically unroots your phone back to stock, in this case, the 3.70 update stock.

yes I did but its keep rebooting

misagh99 said:
but when my phone keep rebooting how could I check usb debugging and install recovery? when I turn on my phone the only thing I see is white screen sads evo 4g and after 2 secounds .. reboot again
Click to expand...
Click to collapse
If your phone cannot boot normally but can get into the bootloader, you can push a recovery onto the phone with ADB. It's more of an advanced method, but it looks like you may not have a choice. The problem is that you already started running an RUU and you unrooted the phone. If you rooted with unrevoked, then it should say "s" off. The fact that it says "s" on means what unrevoked did is gone or partially gone, at least.
Try running the RUU again like teh roxxorz mentioned.

Last time I was on CM7-GX4 with toastcfh-2.6.34-wimax kernel.

I download a file nameC36IMG_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed and I rename it to PC36IMG and I coppy that to sd card and I installed it tru boot loader. after all these step and reastarting my phone it keep rebooting and rebooting againg. I mean android dosen't boot the only thing I see is the white screen and after one secound its reboot again.

misagh99 said:
I download a file nameC36IMG_SuperSonic_S_Sprint_WWE_3.70.651.1_Radio_2.15.00.11.19_NV_1.90_release_161482_signed and I rename it to PC36IMG and I coppy that to sd card and I installed it tru boot loader. after all these step and reastarting my phone it keep rebooting and rebooting againg. I mean android dosen't boot the only thing I see is the white screen and after one secound its reboot again.
Click to expand...
Click to collapse
It should have came out as an exe...which you run from the computer...
Boot your phone into fastboot, connect to pc, once is shows up as fasboot usb on the phone, run the RUU exe on the pc...

getting stupid 170 error. I installed htc sync but i don't know why it didn't fix

You also have the HBOOT drivers installed? And you need to uninstall HTC sync, just the program, after installing.

Where in sac are you? I can help you out if you would like.

I cant believe it!!!

Ok! So i was running fresh 3.5 on my evo 4g and everything was running great. I decided that I wanted to add a battery percent on the battery indicator. I download a zip file that would allow me to do that...I put it on the root of my sd. I tried flashing it with clockwork mod 3.0 but it didnt let me cuz it came up with an error saying to update my binary and script. So i googled on how to bypass that error and it said to use the ra recovery(the other recovery program,i think thats what its called ) so i flashed ra with rom manager. I rebooted my evo and went into recovery and flashed the zip file then a couple of minutes later it said it was complete(no errors came up during the flashing process). I rebooted my evo after the flashing was done. This is where it starts getting weird! I turned my phone back on and after the white screen a black screen came up and didnt go away. After about a minute the phone vibrated about 4 times and the indicator light started flashing green. I couldnt power down so I had to take out the battery. I turned it back on and it booted up to the fresh boot logo. It tried to reboot itself about 3 times and without success the black screen came up and vibrated with flashing green light. Took the battery out for an hour then I booted it to the boot menu, went into recovery to try to delete the zip file and all it did was give me the black screen, vibrated and flashing green lights. I checked to see if s-off was still engaged and it wasnt. S-on was showing. I think some how that zip file made that happen. I have a nandroid backup. I dont have recovery and s-on is engaged. What should I do? This is the file that I flashed( smooth-sense_evo1.0.2_batteryonly ) Sorry if Iam posting this in the wrong section. Any help would be appreciated. Thanks

Holy Wall-O-Text Batman!
But getting to your issue:
You enabled security again. Flash the stock RUU found in the most up-to-date unrooting guides and go back to stock. Re-root again using Unrevoked and then flash again. Mind you, you will be starting over more or less.
The reason why I'm telling you to unroot and then root again is that you want to get rid of that funky flash. Its the safest way possible.

So I need to unroot first (even though it says s-on)
Then root again with unrevoked
Then flash stock ruu

Flashing the RUU should unroot for you. It will undo any mods except for s-off from unrevoked.

Still no luck.
This is what i have done.
Ive tried rooting again using unrevoked 3 but it doesnt pick up my evo when i plug in my phone. It does come up in my device manager but its not assigned a drive letter. Yes i did enable hboot usb. Yes my drivers are installed right.
Ive tried different ruu's but they wont detect my evo. Ive tried different stock PC36IMG's and they will update with no errors but when it reboots into the the screen with green arrows and a phone it vibrates 4 times then turn off.
Can you guys be more specific on the steps that in need to do. Thanks once again.
Info:
HBoot 2.10
Radio 2.15

I feel your pain, same thing happened to me after months of successful evo hackery. Was very difficult to convey to people the extent of random roadblocks preventing all the supposed fixes. I followed every suggestion, maybe 200 separate tries at a workaround, but in the end I had to trade it in for a refurb.

To flying low,
I still have faith especially with everybody helping me out. I know theres a workaround cuz i still have hboot up and running even tho i lost recovery and rom.

Can i use unrevoked when iam in hboot? Cuz thats the only option i have.(i think)

calishooter said:
To flying low,
I still have faith especially with everybody helping me out. I know theres a workaround cuz i still have hboot up and running even tho i lost recovery and rom.
Click to expand...
Click to collapse
you need to flash the RUU in hboot or run the RUU in Windows...it doesnt matter whether it says s-on or not all it will do is restore the phone back to its shipped factory settings and unroot you

What you do:
Find and download the latest RUU. I Think this is it: http://shipped-roms.com/shipped/Sup...51.1_Radio_2.05.00.06.10_release_CL195459.exe (download should start automatically)
name it PC36IMG.zip
Place it on the root of your sd card (root of sd card = no in any folders, just put it on there).
Boot into bootloader (power off, hold volume down and turn power on to get there)
it'll ask if you wanna parse update, hit volume up for yes.
basically, this will flash the stock rom back onto your phone. Since you're s-on already, this will complete a full unroot. Then simply re-root your phone like you did the first time and you're back in the game

Ok i will try flashing the ruu from the link that you gave me.
Thanx. Will report back soon.

I tried the link but its a .exe file not a zip. So I converted it to a zip file using winrar. I renamed it PC36IMG and put it on the root of my sd. Ran it and it just got to the checking part and it stoped checking. I did it 2 times with same result.I also formated my sd card to fat32.

calishooter said:
I tried the link but its a .exe file not a zip. So I converted it to a zip file using winrar. I renamed it PC36IMG and put it on the root of my sd. Ran it and it just got to the checking part and it stoped checking. I did it 2 times with same result.I also formated my sd card to fat32.
Click to expand...
Click to collapse
If you want to run the ruu in PC36IMG form, you need the right file.
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip < Rename to PC36IMG, then flash in the bootloader.
The ruu.exe is meant to be run from a computer, with the phone booted into the bootloader, and mounted to the pc in fastboot.

Yes i agree tech roxxorz. I was just doing what he told me. Ive tried RUU.exe before but it wont recognize my evo niether does my computer and iam in hboot usb mode. I will try your link and repot back.

calishooter said:
Yes i agree tech roxxorz. I was just doing what he told me. Ive tried RUU.exe before but it wont recognize my evo niether does my computer and iam in hboot usb mode. I will try your link and repot back.
Click to expand...
Click to collapse
Well you can't do it in hboot usb. You have to select fastboot, connect to the pc, and when it shows up as fastboot usb in blue on the phone, then you run the ruu.exe.
Though either method will work.

So when I click on fastboot on my evo, what do i click on next to run RUU.exe cuz I only have reboot or power down options.

calishooter said:
So when I click on fastboot on my evo, what do i click on next to run RUU.exe cuz I only have reboot or power down options.
Click to expand...
Click to collapse
Turn the phone off. While turning the phone off, hold vol+down till you see a white screen with androids skateboarding [bootloader] From there, after it scan, navigate to fastboot with the volume keys, press the power button to select, then connect to the PC via usb cable. When it says 'fastboot usb' in blue, run the ruu exe on the pc.

OK got it. Will report back soon.

Aye aye cappy.

I did what you wrote. The ruu.exe gave me an error 170-usb connection error. I booted into the bootloader by holding down the power button and volume down why the evo is turned off. It scaned the sd card, I selected fastboot and plugged in my usb cable. It said fastboot usb highlighted in red.

HTC DESIRE unroot with RUU 2.3.3 failed

Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!

i_cs_u said:
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
Click to expand...
Click to collapse
plug the phone in then turn it on, tell us what it says

bortak said:
plug the phone in then turn it on, tell us what it says
Click to expand...
Click to collapse
It doesn`t say anything.
This is what I do:
1. Take the battery out.
2. Put the battery back in place
3. Try turning phone on using: Volume-down+Power -> the phone doesn`t show anything, it simply takes me to the HTC logo(white HTC logo on black background. It does the same thing if I turn it on using BACK+Power)
If I try running the RUU again, the installer gives me the next message: Error[152]: image update error.
From what I`ve read, this is a radio error which can only be fixed by hTC. Could that be true?
Also, after the RUU gives me the above error, if I unplug the USB cable, the phone shows following:
*************
RUU
Radio_V2 - OK
Splash1 - OK
Recovery - OK
Splash2 - OK
Radio_cust - OK
Bootloader - Bypassed
Userdata - OK
System - Fail-PU
Boot - OK
Partition update fail!
Update fail!
*************
I have the Alpharev CM7 r2 bootloader.

even if it is its covered by htc warranty so don't worry about it

I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.

i_cs_u said:
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
Click to expand...
Click to collapse
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.

Yes, I`m still S-OFF.
How do I flash them if I can`t access recovery using Volume-down+Power or BACK+Power?
I`ve downloaded the first one, renamed it into PB99IMG.zip, put it on root of SD CARD, turned phone ON and it takes me to the same htc logo screen as before.
LE
Tried with Android Flasher, but it gets stuck when trying to flash the bravo_alphaspl.img that u`ve given me.
So basically, I can`t enter Clockworkmod, I can`t enter the bootloader menu by turning on phone usine Volume-down+Power / Back+Power, and the phone is stuck in the HTC logo, while still S-OFF-ed, also the 2.3.3 official RUU gives me the error at the end of the installing process.
Does anyone have any idea what I could do?

Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.

i_cs_u said:
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
Click to expand...
Click to collapse
Haha it's cool dude but if I ever visit I may holla at you for some of those beers though

I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?

Flash bravo_downgrade.img and then the RUU.

Holabalola said:
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Click to expand...
Click to collapse
bootloader/hboot/spl

Nevermind, I got it to work

So write how to help others and if we helped you, use the thanks-button.

bortak said:
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Click to expand...
Click to collapse
Thanks for this. Returning desire tomorrow (switching networks) and forgot to resize and downgrade hboot before running ruu. Good job I ran into this thread for a reminder!

hey, i have a same problem as i_cs_u and dont know how to solve it, can someone give me explained proces?

Did you read the whole thread????

yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?

HTC_Desire_luka__ said:
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
Click to expand...
Click to collapse
He probably figured out that he has to use the fastboot flash boot *name of img* command or Android Flasher on that screen with the 4 ! At the corner instead of renaming to PB99IMG and attempting to flash it on the phone.
Sent from my HTC Original Desire with Android 4.0.1 ICS using Tapatalk

but i dont know how to do it from fastboot. i need an explaination of the process.