I update today my WM 6.5 ROM to version 2.07.707.1 and after the first boot I realized that did not show the QUICK MENU located at the top right corner of the Today screen, I tried search something on the web and could not find. I saw that could be enabled in SETUP> SYSTEM> TASK MANAGER, but in this version don't has the SYSTEM > TASK MANGER.
Is this normal? Does anyone know why this happening?
Would any way to enable the QUICK MENU?
raradao said:
I update today my WM 6.5 ROM to version 2.07.707.1 and after the first boot I realized that did not show the QUICK MENU located at the top right corner of the Today screen, I tried search something on the web and could not find. I saw that could be enabled in SETUP> SYSTEM> TASK MANAGER, but in this version don't has the SYSTEM > TASK MANGER.
Is this normal? Does anyone know why this happening?
Would any way to enable the QUICK MENU?
Click to expand...
Click to collapse
search. comes in handy.
fix on this thread ---> linky.
post one. under mods. first option. install .cab.
sh4d0w86.
sh4d0w86 said:
search. comes in handy.
fix on this thread --->
post one. under mods. first option. install .cab.
sh4d0w86.
Click to expand...
Click to collapse
exactly! works perfectly!
thank my friend ! Greetings from Brazil!
There's a very good thread on this new ROM in the ROM Development subforum that you should check out. Lots of info on fixes and settings for this new AT$T ROM.
Miami_Son said:
There's a very good thread on this new ROM in the ROM Development subforum that you should check out. Lots of info on fixes and settings for this new AT$T ROM.
Click to expand...
Click to collapse
...that is the link i provided.
Related
Hi People
First off, want to say hi, really looks like a nice community here, and hoping to be a human sponge and soak up all I can from you
Hopefully be able to contribute at some point in time.
I got a SPV m700 (Trinity) from Orange, and using my T-mobile sim card in it, after installing mun's ROM update.
Just wanted to know - does the INTERNAL gps still work, as I can only see the external GPS setting.
Will be loadin up TomTom as soon as I get a memory card.
Any other suggestions from you guys - that has experience with t-mobile settings for this phone?
cheers!!
You'll be fine.
Don't mess with any of the GPS settings, and when you install TomTom set it up as follows:
Other NMEA receiver
Com 9 Baud 115200
Cheers buddy.
I went thought the massive thread (tried to anyways) and could get a straight answer if it's still enabled or not.
Thanks
With tomtom, just use the Built in GPS setting.
soopahfly said:
With tomtom, just use the Built in GPS setting.
Click to expand...
Click to collapse
Sweet - like these kind of answers
"JUST leave it alone"
Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me
sup3rc0w said:
Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me
Click to expand...
Click to collapse
It' in NeilM's third post (look for 'try this')!
Jazza said:
It' in NeilM's third post (look for 'try this')!
Click to expand...
Click to collapse
GAH - I'm going blind!
Thank mate - can't believe I missed that
Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?
i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.
pinkllama said:
i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.
Click to expand...
Click to collapse
You're the man.
I knew p[osting here will be a good idea
sup3rc0w said:
Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?
Click to expand...
Click to collapse
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.
Windoze9t8 said:
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.
Click to expand...
Click to collapse
There is no cab file, only a setup.xml
sup3rc0w said:
There is no cab file, only a setup.xml
Click to expand...
Click to collapse
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works
Windoze9t8 said:
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works
Click to expand...
Click to collapse
Cheers dude - second link works just fine, first one is just a bunch of XML files for some reason
Might have something to do about work blokcing it - but I doubt it.
Just caught up on this thread- sorry!
Glad you now have the HTC HomePlug- I've just tried the download from our site, and it worked fine, so maybe a config problem on the PC you were using?
If you haven't already, just copy the cab file to the PPC, then locate it with Pocket File Explorer, and tap it to install.
Now go to Settings/Today/Items and put a checkmark against it, and uncheck other plugins you don't need, and voila !
Hi, Found this in the Blackstone section of XDA
New Update for Titanium Weather
http://forum.xda-developers.com/showthread.php?t=496758
Instructions:
1. Uninstall Old Version, Soft Reset.
2. Go to Start>Settings>Today>Items Tab and untick windows default.
3. Install new version to device, Soft reset.
4. Go to File Explorer>My Device>Program Files>Titanium Weather and select the last item in the list (if sorted by name)
5. Enter City Detail which can be found here-
http://www.accuweather.com/us-city-list.asp?partner=accuweather&zipcode=birmingham+england
Area code will be at the end of the web address once you have entered your details, E.g www.accuweather.com/world-index-forecast.asp?partner=accuweather&traveler=0&locCode=EUR|UK|UK248|BIRMINGHAM&metric=1
6. Go back to Start>Settings>Today>Items Tab and tick windows default.
V3a Updates:
New Weather Icons
Low & High Temps.
Settings accessable from home screen
Descriptive information about weather.
Enjoy
how about a link so we can download it?
Will search for it
PS: yes a link to the thread would be great, anyway thanks for sharing !!
EDIT:
Add credits to the author please, and may I suggest you to ask for his permission first before offering his CAB in another thread
That's the fair way IMHO
And actualy, showaco's thread is this one:
http://forum.xda-developers.com/showthread.php?t=481379
So hard to find...
http://forum.xda-developers.com/showthread.php?t=496758
Sorry
Sorry everyone, direct link to file now up (in first post).
indy.89 said:
New Update for Titanium Weather for those using Itje's WM6.5 Touch It ROM.
Click to expand...
Click to collapse
hmmm...
for those using Itje's WM6.5 Touch It ROM only ???
Why ???
I use WM6.5 too !!
I've installed this new titanium weather update and it's brilliant. Thanks for letting us know
works fantastic!
I did hit a little snag while installing, did this happen to anyone?
the tab wouldn't show up at first, but after i installed the opera plugin, thats when the weather tab finally appeared. im using a custom cooked 6.5 from the kitchen
I'm having problems with the ZIP code.
Ive entered: "EUR|UK|UK241|LONDON" but it still says invalid location.
Are those meant to be pipes "|" used in the zip code?
Thanks.
HELP. Can't seem to get location code
hey... i've got an htc p3700 (touch diamond) and i know this is the x1 forum. i'm running the bsb6.5a rom and got the titanium theme witrh titanium weather. i can't seem to find the location code for my city. East London South Africa. and accuweather doesn't seem to have it eather. any help please.
How do I disable auto update ????
babydown said:
How do I disable auto update ????
Click to expand...
Click to collapse
Wrong thread to ask for support
You should ask the author in the author's thread
That's why I recommended a link to the thread and not to the CAB directly
SHOWACO OVERDONE HIMSELF with this one: This is a TF3D KILLER APP
gtrab said:
Wrong thread to ask for support
You should ask the author in the author's thread
That's why I recommended a link to the thread and not to the CAB directly
SHOWACO OVERDONE HIMSELF with this one: This is a TF3D KILLER APP
Click to expand...
Click to collapse
Sorry,its the first usefull thing ive posted. will know for next time.
indy.89 said:
Sorry,its the first usefull thing ive posted. will know for next time.
Click to expand...
Click to collapse
Indeed this weather app is a TF3D killer man
No harm done, don't worry
But as I stated before, instead of a link to the CAB, you should better post a link to the THREAD, or people will come here for support !!!
after a day or two from flashing a new rom, i usually find a problem with the gprs connection when updating the "sense" weather tab or surfing the web!! this really annoys the whole of me! though i dont use this feature a lot (i usually use wifi), i cant survive with a problem in my device UNSOLVED!
i tried to:
1. delete the connections and setup them again using the connection setup from the "settings" tab.
2. hard reset and start over again.
3. contacted my operater customer service, but they didnt help me.
4. updated the "connection setup" database and installed the connections, but always says "you have the recent databse version"
please, if someone is good in this, give help.
btw, my radio ver is 1.00.25.05, and i live in egypt now with "vodafone" as my operator.
no help??................
kimo_ig said:
no help??................
Click to expand...
Click to collapse
Install a new connectionsetup app like SysConSetupTopaz.
TRMG76 said:
Install a new connectionsetup app like SysConSetupTopaz.
Click to expand...
Click to collapse
thanks, will give it a try! hope it works
well, it didn't work. still the problem exists!!
what to do??!!!
kimo_ig said:
well, it didn't work. still the problem exists!!
what to do??!!!
Click to expand...
Click to collapse
Maybe a stupid question but after you install the program have you configure your location and profider settings?
Is your location and profider supported by the program you have installed?
TRMG76 said:
Maybe a stupid question but after you install the program have you configure your location and profider settings?
Is your location and profider supported by the program you have installed?
Click to expand...
Click to collapse
SysConSetupTopaz didn't make a difference! I didn't find it after install & soft-reset!
kimo_ig said:
SysConSetupTopaz didn't make a difference! I didn't find it after install & soft-reset!
Click to expand...
Click to collapse
After installing SysConSetupTopaz you will find the shortcut in start-settings-system folder.When you restart your device the shortcut will
automatically moved to connections folder.
TRMG76 said:
After installing SysConSetupTopaz you will find the shortcut in start-settings-system folder.When you restart your device the shortcut will
automatically moved to connections folder.
Click to expand...
Click to collapse
Sorry, but that is what I truly did!! I soft-reseted upon install and found only the old icon for the original connection setup under the settings folder
kimo_ig said:
Sorry, but that is what I truly did!! I soft-reseted upon install and found only the old icon for the original connection setup under the settings folder
Click to expand...
Click to collapse
When i cooked my first ROM i had the same problem.
I don't know why but connectionsetup didin't work.
The original connection setup cannot uninstalled because it is cooked.
I think in this case the best option for you is flashing a new ROM.
Look around there are many good ROMS in here.
Sorry but I can not solve your problem...good luck.
TRMG76 said:
When i cooked my first ROM i had the same problem.
I don't know why but connectionsetup didin't work.
The original connection setup cannot uninstalled because it is cooked.
I think in this case the best option for you is flashing a new ROM.
Look around there are many good ROMS in here.
Sorry but I can not solve your problem...good luck.
Click to expand...
Click to collapse
I really appreciate your effort! But the thing is , that I face this issue on every rom I flash!
I think I'll forget about it and try to use an alternative (may be wifi)!
Thanks again, mate!
Hello everyone - just another way to add custom city to Sense 2.5 enabled PDA. This time via PC. I do not pretend that it the only way - just sharing what I`ve got.
You will need:
SQLite Administrator
homepage
file named 2330fc3c_manila - it can be found in /windows directory
Total Commander PPC
your city weather code (locCode) in accuweather.com database. For example, for Paris in France, Accuweather URL is : _www.accuweather.com/en-us/EUR/FR/FR012/PARIS/quick-look.aspx?partner=accuweather&metric=0
The locCode is EUR|FR|FR012|PARIS
Ok. Here we go.
turn off sense.
copy 2330fc3c_manila elsewhere to your PC, do not forgive to remove read-only atribute.
open 2330fc3c_manila in SQLite Administrator, do not forgive to check "all files".
find the city in your country you do not need - you will replace it whith your own city. go Tables->cities->Fields->cityName
and edit values correspondingly. as the matter of fact - only accuweatherCode is needed to obtain weather - so input it careful.
close SQLite Administrator
copy 2330fc3c_manila to your PPC /windows folder
reboot your PPC
enable Sence 2.5 and enjoy
Tested on At&t FUZE whith Energy.RAPHAEL.23569.Sense2.5.Cookie.Dinik.Glass.Jun.12.
here are good apps righten by JVH3 for weather editing in sense 2.5. I suggest to try it at first, because it is more easy way . besides JVH3 is sort of angry for me starting this thread
Or just use the app that wrote in August.
There is a link in my signature.
And now here: http://forum.xda-developers.com/showthread.php?t=546141
If your ROM supports custom cities, you can just unininstall it when you are done.
JVH3 said:
Or just use the app that wrote in August.
There is a link in my signature.
And now here: http://forum.xda-developers.com/showthread.php?t=546141
If your ROM supports custom cities, you can just unininstall it when you are done.
Click to expand...
Click to collapse
didn`t know about your apps, have try almost anything with latest energy rom - only method I mention above helps. AFAIK this is universal way regardless of sense version, but not the user friendly.
obaz said:
didn`t know about your apps, have try almost anything with latest energy rom - only method I mention above helps. AFAIK this is universal way regardless of sense version, but not the user friendly.
Click to expand...
Click to collapse
I suggest giving it a shot. The Moderator Timmy Marsh links to my app in his post on how to add cities to Sense.
http://forum.xda-developers.com/showpost.php?p=4131139&postcount=29
BTW - That thread has a ton of useful information in its 30 posts.
Once TouchFLO 3D 2.1 came out, nothing worked anymore, so I created the app at the link. Then I added support for Sense 2.5.
I posted links to it in just about all the Energy ROM threads.
Recently a link to it was posted: http://mobilitydigest.com/more-details-on-the-perfect-fuze/
Originally, Dr. Jim Taylor wrote an ariticle on it in September.
http://mobilitydigest.com/2009/09/
Or specifically: http://mobilitydigest.com/sure-is-hot-out/
sorry, but your app do not work in some rom`s. (gen.y wm6.1 sense 2.5)
obaz said:
sorry, but your app do not work in some rom`s. (gen.y wm6.1 sense 2.5)
Click to expand...
Click to collapse
Well it does require dot net compact framework 3.5, which everyone should have by now.
JVH3 said:
Well it does require dot net compact framework 3.5, which everyone should have by now.
Click to expand...
Click to collapse
that rom has it.
obaz said:
that rom has it.
Click to expand...
Click to collapse
I'll flash it to my spare phone and test. If it does not work, the next rev of that app will support it.
Downloading ROM from here: http://forum.xda-developers.com/showpost.php?p=5854816&postcount=2
I have just confirmed that it works using the GenY ROM.
http://forum.xda-developers.com/showpost.php?p=6832744&postcount=87
Perhaps you did not follow the instructions properly.
JVH3 said:
I'll flash it to my spare phone and test. If it does not work, the next rev of that app will support it.
Downloading ROM from here: http://forum.xda-developers.com/showpost.php?p=5854816&postcount=2
I have just confirmed that it works using the GenY ROM.
http://forum.xda-developers.com/showpost.php?p=6832744&postcount=87
Perhaps you did not follow the instructions properly.
Click to expand...
Click to collapse
it is good news, my friend. I like your app. one request - manilla sense shutdown before any operation.
obaz said:
it is good news, my friend. I like your app. one request - manilla sense shutdown before any operation.
Click to expand...
Click to collapse
It already does that.
When you start the app, it shuts down sense or touch flo 3d.
Then, if it was running when you started the app, when you exit with the left soft button labeled Exit, it restarts it.
JVH3 said:
I have just confirmed that it works using the GenY ROM.
Click to expand...
Click to collapse
maybe it sort of software conflict on my pda. it crashes after I trying to choose city.
obaz said:
maybe it sort of software conflict on my pda. it crashes after I trying to choose city.
Click to expand...
Click to collapse
Post a link to the ROM you are flashing. I have an Extra Fuze, so it's no trouble for me to flash it and test. I'm guessing that there might be more than 1 variety of the Gen Y ROM.
You already test it - and say everything is good. so looks like problem on my side
Hello,
I have been ok with my note3neo since it has been bought.but yesterday, I want to change the animation option and so, search for developer option but I couldnt find it.i know exactly where it was before(option>>> general) but now there is no tab for developer option.so, if you could help me, pls tell me what to do to make it appear again.
Thanks...
Settings-> General -> About Device
Keep tapping build number till you get the message
zyroxz said:
Hello,
I have been ok with my note3neo since it has been bought.but yesterday, I want to change the animation option and so, search for developer option but I couldnt find it.i know exactly where it was before(option>>> general) but now there is no tab for developer option.so, if you could help me, pls tell me what to do to make it appear again.
Thanks...
Click to expand...
Click to collapse
Try to search things...Google is best medicine for any issues.
maxzeroedge said:
Settings-> General -> About Device
Keep tapping build number till you get the message
Click to expand...
Click to collapse
Thanks, it worked...