Hi People
First off, want to say hi, really looks like a nice community here, and hoping to be a human sponge and soak up all I can from you
Hopefully be able to contribute at some point in time.
I got a SPV m700 (Trinity) from Orange, and using my T-mobile sim card in it, after installing mun's ROM update.
Just wanted to know - does the INTERNAL gps still work, as I can only see the external GPS setting.
Will be loadin up TomTom as soon as I get a memory card.
Any other suggestions from you guys - that has experience with t-mobile settings for this phone?
cheers!!
You'll be fine.
Don't mess with any of the GPS settings, and when you install TomTom set it up as follows:
Other NMEA receiver
Com 9 Baud 115200
Cheers buddy.
I went thought the massive thread (tried to anyways) and could get a straight answer if it's still enabled or not.
Thanks
With tomtom, just use the Built in GPS setting.
soopahfly said:
With tomtom, just use the Built in GPS setting.
Click to expand...
Click to collapse
Sweet - like these kind of answers
"JUST leave it alone"
Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me
sup3rc0w said:
Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me
Click to expand...
Click to collapse
It' in NeilM's third post (look for 'try this')!
Jazza said:
It' in NeilM's third post (look for 'try this')!
Click to expand...
Click to collapse
GAH - I'm going blind!
Thank mate - can't believe I missed that
Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?
i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.
pinkllama said:
i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.
Click to expand...
Click to collapse
You're the man.
I knew p[osting here will be a good idea
sup3rc0w said:
Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?
Click to expand...
Click to collapse
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.
Windoze9t8 said:
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.
Click to expand...
Click to collapse
There is no cab file, only a setup.xml
sup3rc0w said:
There is no cab file, only a setup.xml
Click to expand...
Click to collapse
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works
Windoze9t8 said:
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works
Click to expand...
Click to collapse
Cheers dude - second link works just fine, first one is just a bunch of XML files for some reason
Might have something to do about work blokcing it - but I doubt it.
Just caught up on this thread- sorry!
Glad you now have the HTC HomePlug- I've just tried the download from our site, and it worked fine, so maybe a config problem on the PC you were using?
If you haven't already, just copy the cab file to the PPC, then locate it with Pocket File Explorer, and tap it to install.
Now go to Settings/Today/Items and put a checkmark against it, and uncheck other plugins you don't need, and voila !
Related
for those who are interested I have uploaded the Australian 3 extended rom for installation after WM6 installation, plus the cab file for set up of other networks- Dopod D810 only.
http://rapidshare.com/files/38093805/Aust_3_ext_rom.rar
http://rapidshare.com/files/38094297/CWW_Enterprises_AUS_Operator_Con.cab
enjoy!
Does this ETX rom have all the things in it required to use planet 3, stream video, use X-series etc?
Just wanted to say thanks for this!
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
can someone host the file on something other than rapidshare, i cant download it for some reason.
zeu569 said:
MontAlbert,
Did you manage to upgrade to WM6 successfully? If so, can you tell me details...are you with 3 Aus? Do i need to first unlock my phone?
Click to expand...
Click to collapse
you need to unlock the extended rom but that is already unlocked on WM6 versions- i have LVSW wm6 rom installed and it works great.
i will try and upload it somewhere else.....
Silly question but how do you install it?
Hi I have downloaded it and all is well and really it looks like all I need to do is
install the cabs one by one ----- but that ain't right is it?
As Paulene Hanson would say ----- Please Explain
stick them in the extended rom and install from there.
Little foggy on the terminology sorry
MontAlbert said:
stick them in the extended rom and install from there.
Click to expand...
Click to collapse
Hi Thanks for the reply please go easy on my noobness but I am not sure by what you mean??
I mean I extracted the extended rom and went in and excecuted the file in that folder --- I then get a question asking me on my trinity if I want to allow a program (enterbootloader.exe) to execute and then it drops out and the flash screen comes up on the trinity but the flash program on the computer says it has an error comunicating with the device and only finishes with the exit option - however no flash takes place
I get the same with the ax3l rom can anyone help? I think i'm missing some basic ideas here
Maybe i should start a new thread --- but any help would be great
I've uploaded the files to my blog. You can get to them from here:
http://www.webdevblog.net/2007/06/26/windows-mobile-6-setting-for-3-australia-dopod-d810/
Hope this is ok MontAlbert?
Enjoy!
bump please
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
andytof47 said:
sorry but i'm still unable to use these files .....I don't want to be a pain but can someone help a fellow ozzie out
Click to expand...
Click to collapse
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
grahamrb said:
Sorry, I haven't looked at how to actually use it, just figured I would host it to save people trying to get it off rapidshare.
I haven't upgraded to WM6 as yet (hoping the official release will be soon so I don't void my warranty).
Click to expand...
Click to collapse
hehe- keep waiting mate- gave up waiting a month or 2 ago and am so glad i did. i figure if anything goes wrong with it i will flash it back to the old rom. I am now using Ax3l's ROM and its great.
to make the files work just click on them and they will install each relevant piece of information.
MontAlbert said:
to make the files work just click on them and they will install each relevant piece of information.
Click to expand...
Click to collapse
Copy the "CWW Enterprises AUS Operator Con" file onto the pda and then run it.
What do you do with the rar file - "Aust 3 ext rom"?? Unzip it and transfer the contents onto the pda (12 odd cab files)?? And what about the exe files in there and the ExtROM.rar file (also in the Aust 3 ext rom rar file).
Thanks for any info you can provide.
Graham
EDIT: Just saw this post by you, now I see where you got all those files from, I just don't know what to do with them now I guess:
http://forum.xda-developers.com/showthread.php?t=307275
I need to check out my 3 on my 3 phone ---- help
Hi I am just wondering something, I have the cab files and am playing around with them, but I really only want one thing from them, and that is the access to my 3 ------ everyone with 3 Australia knows what i'm talking about--- anyway, I am using LSVW windows rom and it nice -- much nicer than the default that came with my dopod/trinity --- but I can't check my account now because the icon is gone -- obviously
but I am guessing it is only a small file or something can anyone help me get my three icon back ---- also can anyone give us a quick break down on what the cabs do and the information of why we would want to install the extended rom??
Cheers all
andytof47 said:
but I really only want one thing from them, and that is the access to my 3
Click to expand...
Click to collapse
search for the cab file, CWW Enterprises AUS Operator Con. Run it and it will setup a access point thingie for 3.
then open your ineternet explorer and type the address three.net.au, go to that page then you will be able to find My3
YOu dont even need the CWW Enterprises AUS Operator Con cab file if you already have the 3 services setup on your phone which can be done manually if it is not already there. You can checkout hte three website or call 3care and ask someone to help you set it up.
aaah the CWW file is the 2nd file in the OP
acess denied on three.net.au
Yeah, I installed the CWW Enterprises AUS Operator Con, and ran it, then chose 3, but I am getting an access prohibited error when I connect to three.net.au
Am i supposed to install all the three rom? or is it just that cab --- remember that all i want is to access my three
Cheers
Hi,
Does this work with other ROM ?
Thks
cmon little help maaaaates
Cmon guys lets work this out -------- I gather most of us would be on 3 within oz
so it will help us all
installed all and I have the key back
Hi Just an update --- I installed all of the extended cabs ---- I was still getting the problems with access being denied however It was MEEEEEEEEE I was trying to connect via my wireless connection not GPRS
It's all Good now
Cheers all
Hi all,
To be more clearer than the title, each time Faman does a new ROM, I update my Trinity and so I have to re-install all my CABs. I have created a folder on my storage card and I install it one by one.
So the question is, can we have a soft installed on the storage card where you can choose all the cabs that you want to install ?
You could maybe choose for each cab if you want to install it on the storage card or on the phone and then launch the global installation
I was thinking on doing it with Mortscript but maybe something already exists.
Thanks for your help
lmr2003 said:
Hi all,
To be more clearer than the title, each time Faman does a new ROM, I update my Trinity and so I have to re-install all my CABs. I have created a folder on my storage card and I install it one by one.
So the question is, can we have a soft installed on the storage card where you can choose all the cabs that you want to install ?
You could maybe choose for each cab if you want to install it on the storage card or on the phone and then launch the global installation
I was thinking on doing it with Mortscript but maybe something already exists.
Thanks for your help
Click to expand...
Click to collapse
Hi,
I'm looking for it too....
BYE, Bobo
me too!!
Stratos74 said:
me too!!
Click to expand...
Click to collapse
Hi,
I've read that with Microsoft Visual Studio that's possible... as soon as possible i try to make a procedure....
But not in the nex days because i've some problem...
If someone have it ready please share with us... Thank's
BYE, Bobo
It's good to see that I am not alone
Thanks for your replies.
Is there someone who can do that ?
Apreciate
there are a couple of apps that will do cab installation for you.. There's info under the backup/restore section of the trinity upgrade guide on my site. Sorry I can't be more specific, just checking in real fast on my iPhone
racerx_ said:
there are a couple of apps that will do cab installation for you.. There's info under the backup/restore section of the trinity upgrade guide on my site. Sorry I can't be more specific, just checking in real fast on my iPhone
Click to expand...
Click to collapse
Downloaded !
I'll try it.
Thanks for your help
Is it working ? I'm interested in too
lmr2003 said:
Downloaded !
I'll try it.
Thanks for your help
Click to expand...
Click to collapse
I can't found anything...where you have found it?
MatteoC said:
I can't found anything...where you have found it?
Click to expand...
Click to collapse
Have a look here
http://forum.xda-developers.com/showthread.php?t=308100
yeah that's the one. Sorry my memory was a bit foggy. Settings saviour gets me back up and running with all my software within 15 minutes of a flash
lmr2003 said:
Have a look here
http://forum.xda-developers.com/showthread.php?t=308100
Click to expand...
Click to collapse
Thank'you very much!
lmr2003 said:
It's good to see that I am not alone
Thanks for your replies.
Is there someone who can do that ?
Apreciate
Click to expand...
Click to collapse
I've already posted a mortscript to do this. you can see it in the collection of mortscripts.
jiggs said:
I've already posted a mortscript to do this. you can see it in the collection of mortscripts.
Click to expand...
Click to collapse
Where can I find you collection ? I'm interested in that.
Thanks
I have tried the tool as I have just flashed my Trinity to the the Faman's v4 full D ) and it works fine. It will retreive all your bluetooth devices, your My documents folder... It's great
I think jiggs refers to a thread in the Development and Hacking forum...
But I don't think a mortscript is good for your purpose - not because of the script he wrote is bad nor mortscript itself is bad, the thing is you actually need to install mortscript manually before you can invoke that script and thus defeating your original idea to install everything automatically....
If mortscript can be compiled into a standalone executable, that would be better
after a day or two from flashing a new rom, i usually find a problem with the gprs connection when updating the "sense" weather tab or surfing the web!! this really annoys the whole of me! though i dont use this feature a lot (i usually use wifi), i cant survive with a problem in my device UNSOLVED!
i tried to:
1. delete the connections and setup them again using the connection setup from the "settings" tab.
2. hard reset and start over again.
3. contacted my operater customer service, but they didnt help me.
4. updated the "connection setup" database and installed the connections, but always says "you have the recent databse version"
please, if someone is good in this, give help.
btw, my radio ver is 1.00.25.05, and i live in egypt now with "vodafone" as my operator.
no help??................
kimo_ig said:
no help??................
Click to expand...
Click to collapse
Install a new connectionsetup app like SysConSetupTopaz.
TRMG76 said:
Install a new connectionsetup app like SysConSetupTopaz.
Click to expand...
Click to collapse
thanks, will give it a try! hope it works
well, it didn't work. still the problem exists!!
what to do??!!!
kimo_ig said:
well, it didn't work. still the problem exists!!
what to do??!!!
Click to expand...
Click to collapse
Maybe a stupid question but after you install the program have you configure your location and profider settings?
Is your location and profider supported by the program you have installed?
TRMG76 said:
Maybe a stupid question but after you install the program have you configure your location and profider settings?
Is your location and profider supported by the program you have installed?
Click to expand...
Click to collapse
SysConSetupTopaz didn't make a difference! I didn't find it after install & soft-reset!
kimo_ig said:
SysConSetupTopaz didn't make a difference! I didn't find it after install & soft-reset!
Click to expand...
Click to collapse
After installing SysConSetupTopaz you will find the shortcut in start-settings-system folder.When you restart your device the shortcut will
automatically moved to connections folder.
TRMG76 said:
After installing SysConSetupTopaz you will find the shortcut in start-settings-system folder.When you restart your device the shortcut will
automatically moved to connections folder.
Click to expand...
Click to collapse
Sorry, but that is what I truly did!! I soft-reseted upon install and found only the old icon for the original connection setup under the settings folder
kimo_ig said:
Sorry, but that is what I truly did!! I soft-reseted upon install and found only the old icon for the original connection setup under the settings folder
Click to expand...
Click to collapse
When i cooked my first ROM i had the same problem.
I don't know why but connectionsetup didin't work.
The original connection setup cannot uninstalled because it is cooked.
I think in this case the best option for you is flashing a new ROM.
Look around there are many good ROMS in here.
Sorry but I can not solve your problem...good luck.
TRMG76 said:
When i cooked my first ROM i had the same problem.
I don't know why but connectionsetup didin't work.
The original connection setup cannot uninstalled because it is cooked.
I think in this case the best option for you is flashing a new ROM.
Look around there are many good ROMS in here.
Sorry but I can not solve your problem...good luck.
Click to expand...
Click to collapse
I really appreciate your effort! But the thing is , that I face this issue on every rom I flash!
I think I'll forget about it and try to use an alternative (may be wifi)!
Thanks again, mate!
== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami
http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
where do u dl haret.its mentioned but theres no dl link
cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that
i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...
how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.
Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...
Oké i'm sorry... Hope it will be availible soon.
Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.
I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.
lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.
gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?
dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.
I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?
Please read this originall thread: http://forum.xda-developers.com/showthread.php?t=627997
This is not my work! I just change some files, to be able to run this Android on VGA devices. (I testet it just with RAPH100)
Screenshots:
Coming soon
Download:
Rapidshare
If you use HTC Fuze download FUZE Startup rename it to "startup" and copy it to andboot folder.
For Updating this Android u should use an application called MJGDroidUtil in ANDBOOT folder.
Click on/Open MJGDroidUtil -> Click Menu -> Update -> check the checkboxes -> click Update
Further Development Cancelled but update tool will be working
Wifi working? and HTC Sense not to big like one the Klinux build?
Yeah WiFi works for me, and the sense is usuable
I think this is Klinux, just bootscreen says it
Well if this is Klinux build it's working out of the box for me on VGA
And we already have a thread here for Klinux builds
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
macieh said:
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
Click to expand...
Click to collapse
how are you geting this to work on ur fuze? I downloaded the link and extracted, copyied everything in the andboot folder onto the root of my sd.
i started up haret and i keep getting loops and loops of the Klinux:hTc boot screen.
I go no where. I loops that screen again and again. I cant go pass that. What did you do different?
macieh said:
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
Click to expand...
Click to collapse
I have the same market place problem I have using a touch pro Raphael 100 .. no solutions for this ?
lemonspeakers said:
how are you geting this to work on ur fuze? I downloaded the link and extracted, copyied everything in the andboot folder onto the root of my sd.
i started up haret and i keep getting loops and loops of the Klinux:hTc boot screen.
I go no where. I loops that screen again and again. I cant go pass that. What did you do different?
Click to expand...
Click to collapse
I edited startup file to be able tu use this linux with fuze.
Enjoy it
FUZE Startup
Rename it to "startup" and copy it to andboot folder
// I will look at Marketplace
And what exactly is the difference with this :
http://forum.xda-developers.com/showthread.php?t=647779
and this:
http://forum.xda-developers.com/showthread.php?t=641021
I have had Android running on my raphael100 with perfect sense in vga for some time now.
Did you miss that or have you put in something extra?
I have checked. There is absolutely no difference..
Looks like someone wasn't really paying attention the last couple of weeks
The linked thread actually mentions a lot of things aren't working that are working on the other builds.
rajackar said:
And what exactly is the difference with this :
http://forum.xda-developers.com/showthread.php?t=647779
and this:
http://forum.xda-developers.com/showthread.php?t=641021
I have had Android running on my raphael100 with perfect sense in vga for some time now.
Did you miss that or have you put in something extra?
Click to expand...
Click to collapse
your vga fix, does that include the chopped off icons text as well?
AdamiX said:
I edited startup file to be able tu use this linux with fuze.
Enjoy it
FUZE Startup
Rename it to "startup" and copy it to andboot folder
Click to expand...
Click to collapse
thanks for your reply. but i still cant get this to work on my att fuze.
this is what im doing.
1) format card
2) extract downloaded file onto computer desktop
3) copy everything from the andboot file into root
4) replace the STARTUP.txt with ur startup_fuze from page1
5) put card into device
6) start up
I keep getting this loop at the boot screen of klinux:hTc
I can't go pass that!! ARGH!
The funny thing is that all these problems can be solved by reading to my thread and klinux's thread..
Indeed, I think it's better to just close this thread and not add to the confusion of the already growing number of android threads.
Ok guys
Sorry that i want to share something
Haha, good job, I am using Raphael 100 as well.
Please keep going
but my phone every time I wake it, the brightness always very low. Is there any solution? I already turn off the auto brightness.
AdamiX said:
Ok guys
Sorry that i want to share something
Click to expand...
Click to collapse
I'm not trying to bash you or anything and as always any work done to improve android on our devices is highly appreciated. Only thing going on here is that we can't really see the difference with the other packages.
Could you perhaps clarify that for us?
what is the probleme on this build
rajackar said:
I'm not trying to bash you or anything and as always any work done to improve android on our devices is highly appreciated. Only thing going on here is that we can't really see the difference with the other packages.
Could you perhaps clarify that for us?
Click to expand...
Click to collapse
Ok so use another build There is a lot of ported androids, like ROM. There is also a lot of ROMs so choose one and use it
@frank007hk brightness. I haven't got this problem. Just try to chane some settings. but if u turn off the auto brightness in WinMob, there will be something just in Android's settings
So Stop this thread. There is a lot of ports for android, u can try them