I've got a Diamond from orange(Diam100) and I want to flash it with a new fra rom; I have tried HardSPL 1.40/1.93 OliNex, using the RUU, and by loading the device into the bootloader manually from USB, using the Diamond-sspl.exe, but it blocked at "Loading...", "0%" and nothing at all. I can't figure out what i's wrong!
the original on is : spl-1.37.0000
i found some one did use SSPL and he had the same problem diam100 orange spl 1.37
but i don't know how i can do it ????
Related
Before doing hard SPL to my Diamond I tried to connect to bootloader using mtty. It was OK. I tried 'info 7' command, gave me nothing though. Then I tried 'info 8' and 'info 2' command it was ok. After these tried I installed Olinex hard spl and it was doing ok but when I tried to connect to bootloader using mtty I failed!!
It said no usb port can't open. I tried hard reset once, the problem still there. Then I tried to flash with new rom 1.37 asian wwe, flashing run well and my Diamond works fine so far. But still can't connect to bootloader using mtty hmm...
factory default rom: 1.35 asian wwe
factory default spl: oops I forgot.
now using spl :1.3 Olinex and rom 1.37 asian wwe
Is there anybody have this problem and how to solve this??
Hi,
I recently had my diamond return to me from HTC (screen repair) and as part of the normal process they flash the latest rom when they return the device.
Now i have the latest 2.03 rom and 2.03 SPL (did not know there was a 2.03 SPL)
Now for the problem..... I cant seem to flash to a hard SPL ie 1.24 or 1.40, i have tried them all and i have tried the manual method (no luck).
Prior to me sending off my diamond i had flashed the 1.24 spl with no issues.
I have looked all over the forum and i can't find any mention of a 2.03 SPL and i am wondering is this new SPL prevents you from flashing to any older/other SPL versions.
If any one has any ideas please help.
_)_?_:?
problems because of the SPL?
There is a good part to the new SPL?
could someone get this SPL? for a separate installation?
thanks :d
Yeah it is strange i had no idea there was a new one until i tried to flash and it shows spl 2.03 on the boot loader screen.
If someone knows how i can get a copy of this SPL off my device i will post it for all to look at.
bump...Loads of people have looked at this, no one with any ideas ??
if i remember corectly i had it on my phone also, but i could change it...
littlej said:
if i remember corectly i had it on my phone also, but i could change it...
Click to expand...
Click to collapse
ahhh interesting..... which SPL do you now have on your diamond ?
You have to use SSPL.
Just flashed HardSPL 1.24 over 2.03.
...
y want to instal spl 2.03 to test a modified room
I have ha diamond P3700 with the latest stock rom 2.03xxxNOR (norwegian) ,
Together with this upgrade came the SPL 2.03
I have tried a million times to put HardSPL both from Olinex and the 1.24 , The same problem happens all the time. The phone sync with active sync , can flash original HTC rom , but with any of the hardSPL the phone disconnects after turning black and after a few minutes I get the error message 260 , the phone is not connected. The PC cant recognize the USB device before this happenes.
I`ve tried to run SSPL manually, i`ve tried 4 computers and different USB.
For me it seems like the new SPL 2.03 blockes any attempt of putting something non-stock on my phone Anyway to bypass this???
Hello,
When I bought my Diamond I upgraded it from 1.93PTG to 2.03PTG.
Although, I prefer English interface. So, I hard-spl'd it with OliPro's but I still couldn't flash the 2.03 Europe one.
So, after searching, I found a Hard-SPL 1.24 (followed the instructions) and everything went fine...
Maybe you should try this one also...
Hard-SPL post:
http://forum.xda-developers.com/showthread.php?t=408621&highlight=hard+spl
Best regards,
Nuno
I had the stock NOR 2.03 rom too, and flashed with no problems using Olinex unsigned hardspl 1.40.
Using a WM 6.5 ROM atm, and everything works well
Im having issues with SPL.
Originally, the device came with 1.93, so when I installed I installed hard spl 1.93 olinex.
Now I tried to do sim unlock and the guide asked me to go hspl 1.24, I tried to skip that step and go staright and install the patched radio, but it failed to update - error 226 with RUU.
I thought maybe its related to the hspl, so i downgraded to 1.24 but still I have that issue that I get error 226.
after i downgraded i still see in the bootloader mode spl 1.93 olinex.
I thought maybe to stock spl and then from there to hspl 1.24 and from there to patched radio maybe it will succed.
But even in stock spl it appears spl 1.93 olinex.
Also, besides that, i cant install the patched radio.
I appraciate your help..
Thanks.
I've noticed it the other way around, I first HardSPLed it with v1.40 and some later I flashed v1.93 (I think at least twice), without any error, but the flashscreen still says v1.40. Never had any problem though ...
Can't help you with the SIM unlocking, haven't tried it yet.
with the spl im mostly concerned because one day i might need warrenty and if it says 1.93.olinex..someone will probably suspect..
To Sim-unlock it doesn't matter you have HardSPL(Olinex) 1.40 or 1.93. The most important is your radio, you mut have the Diamond_Radio_1.00.25 intermediate to accept the SIM-unlock proces. Look at the thread .. unlock (sticky) and get the file - Radio downgrade - then you go. The error 226 is related to the radio version !!!
eranyanay said:
Im having issues with SPL.
Originally, the device came with 1.93, so when I installed I installed hard spl 1.93 olinex.
Now I tried to do sim unlock and the guide asked me to go hspl 1.24, I tried to skip that step and go staright and install the patched radio, but it failed to update - error 226 with RUU.
I thought maybe its related to the hspl, so i downgraded to 1.24 but still I have that issue that I get error 226.
after i downgraded i still see in the bootloader mode spl 1.93 olinex.
I thought maybe to stock spl and then from there to hspl 1.24 and from there to patched radio maybe it will succed.
But even in stock spl it appears spl 1.93 olinex.
Also, besides that, i cant install the patched radio.
I appraciate your help..
Thanks.
Click to expand...
Click to collapse
just flash this Spl : http://forum.xda-developers.com/showthread.php?t=400402 and then your problem is solved use the first zip download it worked with me
Just used the modmydiamond manual to upgrade to HardSPL 1.40 OliNex
But when i try and check by preforming a HardSPL the bootloader doesnt show:
Hard SPL 1.40.Olinex
DIAM100 MFG 64M
SPL-1.40.OliNex
Havn't been able too see what its says exactly
Edit: Just saw the xda manual have another textlines then modmydiamond that matches mine.
hi there...are you using the 1.93 rom? if it is...try upgrading to 2.03 official rom first...then u could flash hardspl...note that when it starts flashing..the screen will fade black slowly..then its being flashed...if it jumps to the 4 coloured bootloader...means its not working...good luck!