SPL 2.03 Problems - Touch Diamond, MDA Compact IV ROM Development

Hi,
I recently had my diamond return to me from HTC (screen repair) and as part of the normal process they flash the latest rom when they return the device.
Now i have the latest 2.03 rom and 2.03 SPL (did not know there was a 2.03 SPL)
Now for the problem..... I cant seem to flash to a hard SPL ie 1.24 or 1.40, i have tried them all and i have tried the manual method (no luck).
Prior to me sending off my diamond i had flashed the 1.24 spl with no issues.
I have looked all over the forum and i can't find any mention of a 2.03 SPL and i am wondering is this new SPL prevents you from flashing to any older/other SPL versions.
If any one has any ideas please help.

_)_?_:?
problems because of the SPL?
There is a good part to the new SPL?
could someone get this SPL? for a separate installation?
thanks :d

Yeah it is strange i had no idea there was a new one until i tried to flash and it shows spl 2.03 on the boot loader screen.
If someone knows how i can get a copy of this SPL off my device i will post it for all to look at.

bump...Loads of people have looked at this, no one with any ideas ??

if i remember corectly i had it on my phone also, but i could change it...

littlej said:
if i remember corectly i had it on my phone also, but i could change it...
Click to expand...
Click to collapse
ahhh interesting..... which SPL do you now have on your diamond ?

You have to use SSPL.
Just flashed HardSPL 1.24 over 2.03.

...
y want to instal spl 2.03 to test a modified room

Related

Problem: No black screen

Hi everybody,
i have some problems with my diamond: in fact i can flash nothing. i tried to flash a new spl, but without success. I tried Hard-Spl 1.24 and Olinex 1.40 SPL. The screen doesn't go black. I cant do this manual from my diamond too. It says that the file has no signature or something else. I cant flash the spl and so the rom too. Can anyone help me?
p.s. what is happening when i downgrade to stock spl? why for warranty reasons only?

Stuck at SPL: 1.40.OliNex

Hi guys,
I'm trying to change the SPL from 1.40 Olinex to something else as I have found that since I change it to 1.40 any ROM that I put on my HTC Touch Diamond runs soooooo slow :-(
I have downloaded various diffrent SPL's but once I have run them to 100% then boot back to the multi coloured screen (not sure what the technical word is for that screen! hehe) It still shows that it is Olinex 1.40!!!
Anyone know why this is?
Cheers,
Ant
Flash htchackers stock SPLs then reflash with your new-found SPL.
hey d3toxuk
d3toxuk
way you say after hard spl your diamond its slow?
to change your spl you must do this with phone conected to activ sync (and not directly from 3 color bar)

Hard spl problem!!!

I know you guys most be tired of this but im still a lil confused about all this since i have searched around and i have still to know how to return the stock SPL...now i know theres alot of post that show how but what i need to do is find out one which i dont have to use my phone:
What i mean is....i dont have to copy SSManual.bat to my fun and run it from my phone...because i have to return my phone to HTC for warranty reasons but i cannot get passed the align screen configuration at boot since my touch is messed up (p.s. i can still flash and active sync)...
what i need to know is a way to return to the stock SPL without using the phone (except for Active Sync)...
p.s. if i have the ASIA WWE HK ROM on the SPL would be 1.34 or 1.93?
thank you!!
[SOLVED]
Basically, thanks to the ppl in this thread for helping.....since i couldnt get passed my align screen cause of hardware problems with my screen i couldnt access the sspl-manual in order to revert to stock spl so what i did is i flash my phone with Dia duit 1.4 which has no welcome screen or align screen so i could go thru to the phone then performed the sspl manual and reverted to the 1.93 spl (my version)and afterwards i flash my phone with the Asia HTC wwe orginal romhttp://forum.xda-developers.com/showthread.php?t=410720 ......i know ure supposed to first flash orginal rom and then the stock spl but i took a chance and it worked...THANKS u guys keep up the good work and now its up to HTC to fix my hardware....Hoping its on warranty
By the way right now im on Olinex 1.40
thank you again!!!
can't you install the hardspl through bootloader mode?
Unfortunately no, everytime i do either i get an error [202] or it goes straight to 100% but then when i check with the vol - and reset button it shows olinex 1.40
did anybody ever try to send it without reverting back to the stock spl ?
emy09 said:
did anybody ever try to send it without reverting back to the stock spl ?
Click to expand...
Click to collapse
Try to install a rom which don't have to align the screen. then you copy the file you wants from the phone.
Good luck
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
http://forum.xda-developers.com/showthread.php?t=493719
emy09 said:
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
Click to expand...
Click to collapse
i think the new rom of suiller (diadiut 1.4) would do. you don't need to screen align after flashing.
azera_2000 said:
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
Click to expand...
Click to collapse
I appreciate the help but the problem is that i cannot get passed the align screen of the first boot which means i cant run sspl manual since i cannot in the files from my phone.....also if i do flash the Dia duit 1.4 rom which does not boot with the align screen or welcome screen, dont i have to flash the original rom before putting the stock SPL !!.....thank you guys for the info

SPL-2.03

Hi,
I sent my diamond back for repairs, and when it came back it came with SPL-2.03
As a result, I can not flash RUU_Signed_1_93OliNex_HSPL_UnsignedEdition which i need to install a cooked rom from here
Anyone have any ideas what I can do?
Thanks!!
you can't flash SPL 1.93???
My Diamond had SPL 2.03 and I managed to flash 1.93, maybe you're just doing something wrong.
I noticed there's a quite a few different new official SPL versions out there..
Can someone tell me if there's a difference in performance/battery life between hard-spl 1.40 & 1.93? I'd really appreciate it.
just run the sspl-manual from your device and try flashing HSPL after your screen becomes blank.

NewBie ToucH !

Hi Community,
I have been long away so,kind of out of touch with the latest happenings.
I just want to dedicate this thread to some of my stupid questions
I Am sure you guys would definitely help
I Am having a Touch Diamond,Wanted the have the latest sense 2.5 Rom on it ,
Did the 1.30 olinex hard Spl and tried to flash the sense rom via both the internal storage method (Hung At Loading..)
And custom Ruu method( hung at 0%)
So Anybody knows Whats Going on?
And yea i tried to search the forms,couldn't find anything relevant
hard spl
hi max,
firstly you need to update hardspl, some would say you should use olinex 1.39 for myself i found 1.40 .. so i guess it makes no diference. after that you are free to go with brick.... errr .. flashing your phone
Yea, I think i Did the HardSpl 1.40 but it shows 1.30 olinex on the tricolor boot loader screen...
And i cant flash any ROM...Dont know why?
Signed or unsigned problem?
how can i b sure i have hardspl 1.40 olinex.....
hi there
i also got the problem and now i have flashed unsighned hard spl and now its ok
do you have diamond or hermes? i see in your signature that you have hermes and this is not its forum
Diamond
Look At my posts, M not That newbie
So?
max414 said:
Yea, I think i Did the HardSpl 1.40 but it shows 1.30 olinex on the tricolor boot loader screen...
And i cant flash any ROM...Dont know why?
Signed or unsigned problem?
how can i b sure i have hardspl 1.40 olinex.....
Click to expand...
Click to collapse
probably if it says 1.30 that flash was not success.
if you havent found a solution yet, pm me, and will send the 1.40 i used to tickle my phone.
Done with the Rom Stuff
So
I just want to get rid of the vodafone splash screen now!
can some body give me a splash screen with standard htc logo?
I mean wid the patch splash applied ?
I couldnt do it myself

Categories

Resources