Stuck at SPL: 1.40.OliNex - Touch Diamond, MDA Compact IV ROM Development

Hi guys,
I'm trying to change the SPL from 1.40 Olinex to something else as I have found that since I change it to 1.40 any ROM that I put on my HTC Touch Diamond runs soooooo slow :-(
I have downloaded various diffrent SPL's but once I have run them to 100% then boot back to the multi coloured screen (not sure what the technical word is for that screen! hehe) It still shows that it is Olinex 1.40!!!
Anyone know why this is?
Cheers,
Ant

Flash htchackers stock SPLs then reflash with your new-found SPL.

hey d3toxuk
d3toxuk
way you say after hard spl your diamond its slow?
to change your spl you must do this with phone conected to activ sync (and not directly from 3 color bar)

Related

Problem: No black screen

Hi everybody,
i have some problems with my diamond: in fact i can flash nothing. i tried to flash a new spl, but without success. I tried Hard-Spl 1.24 and Olinex 1.40 SPL. The screen doesn't go black. I cant do this manual from my diamond too. It says that the file has no signature or something else. I cant flash the spl and so the rom too. Can anyone help me?
p.s. what is happening when i downgrade to stock spl? why for warranty reasons only?

SPL 2.03 Problems

Hi,
I recently had my diamond return to me from HTC (screen repair) and as part of the normal process they flash the latest rom when they return the device.
Now i have the latest 2.03 rom and 2.03 SPL (did not know there was a 2.03 SPL)
Now for the problem..... I cant seem to flash to a hard SPL ie 1.24 or 1.40, i have tried them all and i have tried the manual method (no luck).
Prior to me sending off my diamond i had flashed the 1.24 spl with no issues.
I have looked all over the forum and i can't find any mention of a 2.03 SPL and i am wondering is this new SPL prevents you from flashing to any older/other SPL versions.
If any one has any ideas please help.
_)_?_:?
problems because of the SPL?
There is a good part to the new SPL?
could someone get this SPL? for a separate installation?
thanks :d
Yeah it is strange i had no idea there was a new one until i tried to flash and it shows spl 2.03 on the boot loader screen.
If someone knows how i can get a copy of this SPL off my device i will post it for all to look at.
bump...Loads of people have looked at this, no one with any ideas ??
if i remember corectly i had it on my phone also, but i could change it...
littlej said:
if i remember corectly i had it on my phone also, but i could change it...
Click to expand...
Click to collapse
ahhh interesting..... which SPL do you now have on your diamond ?
You have to use SSPL.
Just flashed HardSPL 1.24 over 2.03.
...
y want to instal spl 2.03 to test a modified room

SPL-2.03

Hi,
I sent my diamond back for repairs, and when it came back it came with SPL-2.03
As a result, I can not flash RUU_Signed_1_93OliNex_HSPL_UnsignedEdition which i need to install a cooked rom from here
Anyone have any ideas what I can do?
Thanks!!
you can't flash SPL 1.93???
My Diamond had SPL 2.03 and I managed to flash 1.93, maybe you're just doing something wrong.
I noticed there's a quite a few different new official SPL versions out there..
Can someone tell me if there's a difference in performance/battery life between hard-spl 1.40 & 1.93? I'd really appreciate it.
just run the sspl-manual from your device and try flashing HSPL after your screen becomes blank.

Boot problem

After instaling hardspl my diamond isnt loading wm its:
1. starting and showing Touch diamond logo
2. next there are showing orange letters
3. and device isnt loading OS
Do you have any idea what can i do?
(i'm before loading radio and custom ROM (it has original rom))
I can access boot loader.
which hard spl do you installed ?
are you gsm or cdma ?
look for the hard spl 1.93 from olinex working great.
HardSPL: 1.40.OliNex unsigned
GSM
I used modymydiamond.info Diamond Upgrade Guide (it is my 1 rom change).
What i should do after this?
try to install this spl, then reflash your phone with the rom you want for diamond gsm.
Can I left original radio?
Problem solved

NewBie ToucH !

Hi Community,
I have been long away so,kind of out of touch with the latest happenings.
I just want to dedicate this thread to some of my stupid questions
I Am sure you guys would definitely help
I Am having a Touch Diamond,Wanted the have the latest sense 2.5 Rom on it ,
Did the 1.30 olinex hard Spl and tried to flash the sense rom via both the internal storage method (Hung At Loading..)
And custom Ruu method( hung at 0%)
So Anybody knows Whats Going on?
And yea i tried to search the forms,couldn't find anything relevant
hard spl
hi max,
firstly you need to update hardspl, some would say you should use olinex 1.39 for myself i found 1.40 .. so i guess it makes no diference. after that you are free to go with brick.... errr .. flashing your phone
Yea, I think i Did the HardSpl 1.40 but it shows 1.30 olinex on the tricolor boot loader screen...
And i cant flash any ROM...Dont know why?
Signed or unsigned problem?
how can i b sure i have hardspl 1.40 olinex.....
hi there
i also got the problem and now i have flashed unsighned hard spl and now its ok
do you have diamond or hermes? i see in your signature that you have hermes and this is not its forum
Diamond
Look At my posts, M not That newbie
So?
max414 said:
Yea, I think i Did the HardSpl 1.40 but it shows 1.30 olinex on the tricolor boot loader screen...
And i cant flash any ROM...Dont know why?
Signed or unsigned problem?
how can i b sure i have hardspl 1.40 olinex.....
Click to expand...
Click to collapse
probably if it says 1.30 that flash was not success.
if you havent found a solution yet, pm me, and will send the 1.40 i used to tickle my phone.
Done with the Rom Stuff
So
I just want to get rid of the vodafone splash screen now!
can some body give me a splash screen with standard htc logo?
I mean wid the patch splash applied ?
I couldnt do it myself

Categories

Resources