Boot problem - Touch Diamond, MDA Compact IV ROM Development

After instaling hardspl my diamond isnt loading wm its:
1. starting and showing Touch diamond logo
2. next there are showing orange letters
3. and device isnt loading OS
Do you have any idea what can i do?
(i'm before loading radio and custom ROM (it has original rom))
I can access boot loader.

which hard spl do you installed ?
are you gsm or cdma ?
look for the hard spl 1.93 from olinex working great.

HardSPL: 1.40.OliNex unsigned
GSM
I used modymydiamond.info Diamond Upgrade Guide (it is my 1 rom change).
What i should do after this?

try to install this spl, then reflash your phone with the rom you want for diamond gsm.

Can I left original radio?

Problem solved

Related

8125 Stops at loading screen

Hi guys i got problem and probably u know the answers.
i bought 2 HTC 8125 for 50 $ and one is working and other one just freez on Loading
IPL 1.01
SPL 2.25
GSM 01.12.10
OS 1.5.4.2
Got no idea what hapend to this phone.. Any Clues will be good, I try to do a hard reset of the phone and it say Press the send button to restore to factory setting , when i do that it say FAT formatin , Formatin Completed
and then went where it was previously ... I got no idea what that could bee. cause i cannot access over the USB
Please HELP i want to have this phone for tmobile..
for one thing your ipl & spl are different versions. if u want to know what to do look at the wiki for the wizard (make sure you do the cid and sim unlock). look up how to flash a rom, i recommend flashing the stock cingular 8125 rom (after you get the phone able to boot, and after you install the button rom) then flash ipl & spl to 3.08, then flash radio 2.71, then whatever 3rd party rom u want.

Stuck at SPL: 1.40.OliNex

Hi guys,
I'm trying to change the SPL from 1.40 Olinex to something else as I have found that since I change it to 1.40 any ROM that I put on my HTC Touch Diamond runs soooooo slow :-(
I have downloaded various diffrent SPL's but once I have run them to 100% then boot back to the multi coloured screen (not sure what the technical word is for that screen! hehe) It still shows that it is Olinex 1.40!!!
Anyone know why this is?
Cheers,
Ant
Flash htchackers stock SPLs then reflash with your new-found SPL.
hey d3toxuk
d3toxuk
way you say after hard spl your diamond its slow?
to change your spl you must do this with phone conected to activ sync (and not directly from 3 color bar)

SPL 2.03 Problems

Hi,
I recently had my diamond return to me from HTC (screen repair) and as part of the normal process they flash the latest rom when they return the device.
Now i have the latest 2.03 rom and 2.03 SPL (did not know there was a 2.03 SPL)
Now for the problem..... I cant seem to flash to a hard SPL ie 1.24 or 1.40, i have tried them all and i have tried the manual method (no luck).
Prior to me sending off my diamond i had flashed the 1.24 spl with no issues.
I have looked all over the forum and i can't find any mention of a 2.03 SPL and i am wondering is this new SPL prevents you from flashing to any older/other SPL versions.
If any one has any ideas please help.
_)_?_:?
problems because of the SPL?
There is a good part to the new SPL?
could someone get this SPL? for a separate installation?
thanks :d
Yeah it is strange i had no idea there was a new one until i tried to flash and it shows spl 2.03 on the boot loader screen.
If someone knows how i can get a copy of this SPL off my device i will post it for all to look at.
bump...Loads of people have looked at this, no one with any ideas ??
if i remember corectly i had it on my phone also, but i could change it...
littlej said:
if i remember corectly i had it on my phone also, but i could change it...
Click to expand...
Click to collapse
ahhh interesting..... which SPL do you now have on your diamond ?
You have to use SSPL.
Just flashed HardSPL 1.24 over 2.03.
...
y want to instal spl 2.03 to test a modified room

ReStore SPL

hi guys
i would like to restore hard spl
when i bought diamond it has 1.93 wwe (rom) i dident remmer it hard spl
please help me to restore hard spl
thanx
i can restore it
this way
first i flashed it and install 1.93 wwe
then download this (1.93 and ruu) http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
then copy sspl manual on device and run ruu
So I have an HTC Touch Diamond GSM (DIAM 110)
I want to restore my phone to stock settings. I have done hard reset.
I have an issue where my phone hangs on the "touch diamond" screen. I can get into the boot loader and load (some) stock spls. (Others including stock HTC RUU give error)
When I load stock SPL, phone resets, but upon reset it shows OLINEX still.
What can I do???
i have the same problem
i can´t restore another SPL
i always see SPL - 1.40 OliNex
how can i replace it ?
thank´s a lot

Where is the HTC Touch Diamond US 3G Stock ROM (DIAM110)?

Hi,
I'm in sort of a stalemate because I wiped off the OS from my phone but am left with stock SPL. HTC has no ROM for US 3G version (DIAM110), and I can't flash Hard-SPL because it gets stuck at 0%. So I'm stuck in bootloader. I even have a home-made USB Y cable to read DIAMIMG.NBH off a flash drive, but it just gets stuck on "Loading...". The HTC Stock ROMs give error 262.
I've tried hexediting the ROM for DIAM100 to change model to "DIAM11000" and CID to "HTC__017" (like I got from mtty info 0 and info 8 commands).
So anyone have special Hard-SPL or a link to the 3G HTC Diamond ROM (or where to request)?
Thanks.
~codeslicer
ATM I'm trying the trinity splxploit. Will edit status...
~codeslicer
EDIT: no luck
try here http://forum.xda-developers.com/showthread.php?t=432496
Hey,
Thanks for the reply. Unfortunately that's a dumped ROM, and therefore is not signed by HTC. The original SPL bootloader doesn't accepted unsigned code.
~codeslicer

Categories

Resources