I know you guys most be tired of this but im still a lil confused about all this since i have searched around and i have still to know how to return the stock SPL...now i know theres alot of post that show how but what i need to do is find out one which i dont have to use my phone:
What i mean is....i dont have to copy SSManual.bat to my fun and run it from my phone...because i have to return my phone to HTC for warranty reasons but i cannot get passed the align screen configuration at boot since my touch is messed up (p.s. i can still flash and active sync)...
what i need to know is a way to return to the stock SPL without using the phone (except for Active Sync)...
p.s. if i have the ASIA WWE HK ROM on the SPL would be 1.34 or 1.93?
thank you!!
[SOLVED]
Basically, thanks to the ppl in this thread for helping.....since i couldnt get passed my align screen cause of hardware problems with my screen i couldnt access the sspl-manual in order to revert to stock spl so what i did is i flash my phone with Dia duit 1.4 which has no welcome screen or align screen so i could go thru to the phone then performed the sspl manual and reverted to the 1.93 spl (my version)and afterwards i flash my phone with the Asia HTC wwe orginal romhttp://forum.xda-developers.com/showthread.php?t=410720 ......i know ure supposed to first flash orginal rom and then the stock spl but i took a chance and it worked...THANKS u guys keep up the good work and now its up to HTC to fix my hardware....Hoping its on warranty
By the way right now im on Olinex 1.40
thank you again!!!
can't you install the hardspl through bootloader mode?
Unfortunately no, everytime i do either i get an error [202] or it goes straight to 100% but then when i check with the vol - and reset button it shows olinex 1.40
did anybody ever try to send it without reverting back to the stock spl ?
emy09 said:
did anybody ever try to send it without reverting back to the stock spl ?
Click to expand...
Click to collapse
Try to install a rom which don't have to align the screen. then you copy the file you wants from the phone.
Good luck
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
http://forum.xda-developers.com/showthread.php?t=493719
emy09 said:
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
Click to expand...
Click to collapse
i think the new rom of suiller (diadiut 1.4) would do. you don't need to screen align after flashing.
azera_2000 said:
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
Click to expand...
Click to collapse
I appreciate the help but the problem is that i cannot get passed the align screen of the first boot which means i cant run sspl manual since i cannot in the files from my phone.....also if i do flash the Dia duit 1.4 rom which does not boot with the align screen or welcome screen, dont i have to flash the original rom before putting the stock SPL !!.....thank you guys for the info
Related
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
I suggest your search the forum...
hello newbie
yes use the search button...it works really well
You first need to flash your diamond with one of the hard spl on this site and after you've done that you can take your pick from any of the roms on here
sorry guys i did look just didnt understand much. I am trying to use Hard SPL just cant get it to work.
same here
I have an orange htc Diamond and would really apreciate which files wouldwork. Everything I have tried stay's at Zero and ends up in an error.
Any help would be greatly ppreciated
root directory
to use hard spl i have to put a file in the root directory! but what is the root directory?
Hi James, your failing at 0% most likely because the SPL your using will not allow unsigned ROM's. Look for another SPL, one with developer edition in the title is good and works quite well for me.
I have an Orange also, the first thing to do is install the SPL then flash the radio (.05 is good) then get a new ROM!
Hope this helps
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
james soules said:
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
Click to expand...
Click to collapse
You need to do the following
1. Download the Unsigned HardSPL 1.24 from here http://forum.xda-developers.com/showthread.php?t=408621 and extract to a folder on your PC. Make sure you have Active sync installed and setup with your Diamond. Run the Updater in the 1.24 folder. Once the Phone reboots reconnect with active sync.
2. Download any of the ROMS on here and run the ROM to flash the phone.
Thats it !!!!!
Topboy
as i go to add a ROM i get a error saying the application failed to initialize properly ( 0xc0000135) click OK to terminate
Or check www.modmydiamond.info for easy to understand information
i get the above error as i try to add RUU
Hard SPL won't work
Hello,
From what I've read on the forum and also on www.modmydiamond.info, I gather I need to go through the Hard SPL step before installing any ROM.
However, after trying 2 different SPLs (hard_spl.120 and diamond_hspl_1.24) it still doesn't work.
I'm stuck at 0%.
Thanks
Read here....
As an alternative to the other threads try this one:
http://forum.xda-developers.com/showthread.php?t=416211
Its about the most comprehensive writeup I've seen to quickly and easily get your Diamond set from HardSPL to Radios to ROM's
Also read the WiKi's section at the top of the forum......
Query on Orange htc Upgrade ROM.
Hi There,
I have recently purchased a htc diamond, it was originally an Orange unit but is unblocked.The ROM version is 1.37 but I wish to flash to 1.93.I have the Orange released version of the 1.93 as htc wont support me direct.Question is, if I do this will the unit revert back to being Orange??ie.....does this flash the radio back?? or will it remained unblocked??
Thanks in advance...
james soules said:
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
Click to expand...
Click to collapse
thxthxthxthx
I Have Got An Orange Uk Diamond And Have Been Trying To Upgrade From Rom 1.37.405.1 Wwe To 1.93..... But Was Unsuccesfull. I Have Got Few Questions.
1. Is It Possible To To Do It(1.73 Rom To 1.93)
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
I Maybe Asking For Too Much Here.
And Sorry Guys For The Newbie Questions. As It Might Have Already Been Answered A Million Times. I Just Couldnt Find Them.
Thanks In Advance.
When You Type In All Caps It Makes Your Words Normalised But Every Word Has A Capital Letter
Just In Case You Wanted To See Who The Idiots Were
yuv said:
I Have Got An Orange Uk Diamond And Have Been Trying To Upgrade From Rom 1.37.405.1 Wwe To 1.93..... But Was Unsuccesfull. I Have Got Few Questions.
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
I Maybe Asking For Too Much Here.
And Sorry Guys For The Newbie Questions. As It Might Have Already Been Answered A Million Times. I Just Couldnt Find Them.
Thanks In Advance.
Click to expand...
Click to collapse
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
Since you're not giving any details I don't know what your exact issue is. It depends on your Phone and where you got it.
Most likely your issue can be resolved by reading the thread which I link to in my signature.
daleski75 said:
1. Is It Possible To To Do It(1.73 Rom To 1.93)
Yes but you need hardspl unsigned 1.34 or 1.40
2. Do I Need To Hard Spl For This As It Is I Believe An Official Rom
Yes see post above
3. Is There Anyone Who Managed To Backup The Orange Rom 1.37 So If Something Goes Wrong I Can Return And Reflash My Phone Back To The Original Rom It Came With.
Mine is sim-free so cannot help you there but I am sure someone else can.
Click to expand...
Click to collapse
If you HardSPL you wont be able to install a standard HTC ROM without some faffing, I had this problem this week, so if your 1.93 is the released Standard OEM HTC one then dont HardSPL whatever you do.
thanks alot guys. what a quick response. and sorry for the caps lock if it got u confused.
as far as the details of the phone is concerened. its an orange UK contract phone with the ROM version 1.37.405.1 WWE radio 1.00.25.03. the phone hasnt been flashed at all. i did try to flash it to _QMR_RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe but was unable to. i guess i should have hard spl it before.
i m guessing the only thing i need to do is to hard spl it right. or do i need to do something else as well.
again thanks alot guys for the quick responses.
hi tony.
i have actually tried to do it without hard spl but it would get stuck on 1%. is there any other way to do it. i believe the ROM i m trying to flash to is an official one as far as the thread i downloaded it from is concerend.
one thing to clear here. its the first time i m trying to flash from 1.37 to 1.93 official rom. could someone confirm that there is a 1.93... official rom available or is it one of the cooked ones. and could one confirm as well that i need to hard spl even flashing from oficial to official rom. coz two post before tony mentioned not to hard spl.
any ideas guys. thanks
Here's what I've just done, I hope it helps -
Vodafone UK to UK release HTC ROM.
1. I read the info here, over and over and asked lots of questions.
2. I checked the current SPL of my fone (Volume Down & Reset) and found I had 1.37.
3. Downloaded Hard SPL 1.37 UnSigned and installed it - Here was my first problem. Everyone just says use RUU to install hard SPL however the SPL's I downloaded didn't come with RUU so I took a guess and decided that RUU was a generic flasher which could also flash the SPL for me.
4. Use RUU to flash the SPL, mine reported V1.0 as the new ROM version but installed and rebooted perfectly to reveal the coloured screen informng that I did now have a Cooked SPL installed.
5. Followed the fisrt startup procedure that the phone asked me to do.
6. Flashed the new ROM in a similar way to flashing the Hard SPL.
7. Phone flashed ok and I'm just in the process of setting it up now.
One issue I did have was using Vista I had to right click and run as Administrator to make it work.
tonyb15re said:
If you HardSPL you wont be able to install a standard HTC ROM without some faffing, I had this problem this week, so if your 1.93 is the released Standard OEM HTC one then dont HardSPL whatever you do.
Click to expand...
Click to collapse
wrong. if you use unsigned hardspl (aka "developer hardspl") it will flash HTC ROMs just fine
1.93 is also unsigned.
vrstu said:
3. Downloaded Hard SPL 1.37 UnSigned and installed it - Here was my first problem. Everyone just says use RUU to install hard SPL however the SPL's I downloaded didn't come with RUU so I took a guess and decided that RUU was a generic flasher which could also flash the SPL for me.
Click to expand...
Click to collapse
who's "everyone"? this information is totally wrong, wrong, wrong.
next time you download an attachment from a post, read the post where the attachment was, and you won't have this problem (the post that had the unsigned hardspl 1.37 also talked about where to get the special SSPL RUU for it - have a guess. it is in the same post in another attachment).
Thread has been closed due to maintenance of the forum. If you want it reopened, PM a MODERATOR!
Hi,
I recently had my diamond return to me from HTC (screen repair) and as part of the normal process they flash the latest rom when they return the device.
Now i have the latest 2.03 rom and 2.03 SPL (did not know there was a 2.03 SPL)
Now for the problem..... I cant seem to flash to a hard SPL ie 1.24 or 1.40, i have tried them all and i have tried the manual method (no luck).
Prior to me sending off my diamond i had flashed the 1.24 spl with no issues.
I have looked all over the forum and i can't find any mention of a 2.03 SPL and i am wondering is this new SPL prevents you from flashing to any older/other SPL versions.
If any one has any ideas please help.
_)_?_:?
problems because of the SPL?
There is a good part to the new SPL?
could someone get this SPL? for a separate installation?
thanks :d
Yeah it is strange i had no idea there was a new one until i tried to flash and it shows spl 2.03 on the boot loader screen.
If someone knows how i can get a copy of this SPL off my device i will post it for all to look at.
bump...Loads of people have looked at this, no one with any ideas ??
if i remember corectly i had it on my phone also, but i could change it...
littlej said:
if i remember corectly i had it on my phone also, but i could change it...
Click to expand...
Click to collapse
ahhh interesting..... which SPL do you now have on your diamond ?
You have to use SSPL.
Just flashed HardSPL 1.24 over 2.03.
...
y want to instal spl 2.03 to test a modified room
Hi,
My Diamond has no response on the screen, so I think I need to return to factory for repairing. However I have difficulties in falling back to stock ROM and SPL.
From the Wiki:
---------------
STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
...
-----------------
I can't flash my ROM to latest HK WWE CSL ROM (2.03) as it just stopped at 0%. I'm using SPL-1.30.OliNex.
Questions:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
1) Should I flash to v1.93 (the very beginning of the ROM)?
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
3) Anyone can give me a reference on the step-by-step in details...
Thanks!
Please help...
F810
Questions:
f810 said:
0) Why? Any step I've missed? I've just copied the .NBH from HTC official ROM download. Should I get the .NBH from the Wiki instead?
Click to expand...
Click to collapse
If the latest was the offical from the site then you could use that - as you are having issues flashing this with 1.30 HSPL, I would suggest updating that to 1.40
f810 said:
1) Should I flash to v1.93 (the very beginning of the ROM)?
Click to expand...
Click to collapse
This might be a easier option and should work woth the 1.30 HSPL
f810 said:
2) Must the RADIO be flashed back as well? or the above Stock ROM has included the RADIO already?
Click to expand...
Click to collapse
This is recommended
f810 said:
3) Anyone can give me a reference on the step-by-step in details...
Click to expand...
Click to collapse
Its really straight forward like the WiKi suggests
This Thread may help
Thanks a lot.
Re Q3, so do you mean if I extracted the stock NBH, it's only OS but not including RADIO? If so, I will get the RADIO from wiki page later. Would you please clarify for me?
After your information, I think the steps in Wiki are clear. Thanks.
If this is HK ROM is the one you have downloaded from HTC PAGE then it has a radio included
Since my Diamond is totally malfunction in the touch screen, I can't response to all the confirmation & prompts...
I've failed to install Stock ROM and tried your recommendation on upgrading to HSPL 1.40. There was a confirmation on running the program in my Diamond and I can't press YES and now my diamond is just like bricked.
I've also tried pressing VOL DOWN + Reset to connect the Diamond via USB. The ROM Update Utility has "successfully" update the HSPL, but actually when I hard reset it and found it's still running 1.30... Can I just use this approach to fallback to Factory status??
Anyone has good idea on how to fallback to Factory Stock ROM, RADIO and SPL, provided that my screen has totally no response to me?
PLEASE...PLEASE...PLEASE help.
You will not be able to update olipros Hard SPL in bootloader mode as the SPL is protected and the 1.30 will prevent this although show its been done.
What you will need to do then is just load a 1.93 ROM from boot loader. the were some in that link i posted earlier. as to reverting to the default SPL - you may be luck not to need the screen for any confirmation. but running a new SPL to overwrite Oli's you will need to use windows and the RRU
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
band27 said:
Because these Unsigned HARD SPL 's are write protected.....you will fail all the time. Not sure if stock SPL can undue the write protection but if you still get stuck after you try then in order to bypass write protection I know Jump SPL allows for this.
Click to expand...
Click to collapse
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Here you go....I did a search
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Read this............Scroll to Post #39
http://forum.xda-developers.com/showthread.php?t=400950&page=4
band27 said:
Here you go....I did a search
Click to expand...
Click to collapse
I also got that but it's not win32 program... I believe it's running on the Diamond. But I've hard reset, and never able to setup as it's screen was not functioning now...
kawatsu said:
Hi,
Sorry to use this thread but im also trying to install back to my original Diamond ROM and am currently using the rom developed by Diamond Project (1.93.456.2WWE) and i kept flashing it back using Signed V1.93 RUU and apprently the Diamond project words still keep showing out when i start my phone!
How do i completely remove the Diamond Project thing? Thank you!
Click to expand...
Click to collapse
That ROM had a different boot image - so you need to replace that by flashing another splash .NBH file using RUU.
Original splash can be found HERE
and if needed CUSTOM RUU HERE
Just un-zip these and put the splash file in the same folder as the Custom RUU and run the RUU - the flash should take a few seconds and viola - bye bye Diamond project splash.
f810 said:
I've tried to load 1.93 ROM to my diamond but failed on OliNex 1.30. The link in modmydiamond.info on OliNex 1.40 Signed seems not correct, as it's still 1.30 after flashed. I've then flashed UNSIGNED 1.40 OliNex SPL (also downloaded from modmydiamond.info) and now flashing the 1.93 ROM in progress from bootloader.
I will flash the Stock SPL through the Bootloader after that...I hope I can successfully fallback and get it repair...
Last question (I hope), the stock SPL should be 1.37 so I want to confirm whether it can boot 1.93 ROM.
Thanks a lot!
Click to expand...
Click to collapse
I think as long as the SPL is changed and the ROM is of the original language the I think it should be OK to send back like that
f810 said:
you're right. When I flash the Stock SPL, it is "successful" but actually it doesn't update the SPL (i.e yet running OliNex 1.40). Where can I get the Jump SPL?
Click to expand...
Click to collapse
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Which is the original SPL?? 1.23, 1.34 or 1.37? I do recall taking a picture of the original SPL when i 1st got the Diamond for days like that but i just can't find it now
I'm bought it from Malaysia. Anybody can help me confirm this??
R3PUBL1K said:
As said before; you should be able to successfully run the stock SPL using RUU - if you are trying this via bootloader it will not work.
Click to expand...
Click to collapse
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
f810 said:
I've tried to connect to ActiveSync successfully although the Initial Setup wizard on my Diamond. I've then run the RUU from RUU-SSPL-withoutNBH.zip and put the stock SPL .NBH file into the extracted directory. It can retrieve my device info, and when I confirm the update of ROM, after 3-5 sec it said about connection failure. I can browse the Internal Storage at the moment yet.
I've then tried similar thing using the Custom RUU inside the package diamond-hspl-1.34.zip. This time I can see 100% update. When I press VolDown and reset, the SPL is still v1.40 ONliEx.
What's wrong with my procedures above?
Click to expand...
Click to collapse
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
f810 said:
I think I miss the step of running the SSPL-Manual.exe because of my screen is not responding... Anyway for me to put it into the Windows Startup Folder?? When I use ActiveSync I can't see Windows directory.
Please...please...I miss this step only...
Click to expand...
Click to collapse
Can anyone help??
Due to a hardware problem in my Diamond I needed to restore it to manufacturer default. I didn't find a guide to this and since I've done the research anyway I thought I'd put together this little tutorial as the information was somewhat scattered around the forum. I hope this guide will be of use for the community.
My phone was originally branded and sim-locked by 3. After I was through with it, it was SIM-unlocked, security unlocked and had HSPL, custom ROM and a radio ported from another device. The steps below is what I did to restore it to stock. All steps might not be neccessary for you. This procedure might also work for other devices than the Diamond, but of course you need other versions of SPL, ROM etc.
1. Backup everything on your phone to your computer - use activesync, PIMbackup etc and make a copy of your Internal Storage.
2. Make a hard reset (hold vol down + enter and soft reset) and chose to format moviNAND. This step is only neccessary if you want to wipe your Internal Storage before you send the device in for repair, but I recommend it.
3. Go to www.htc.com and download the latest stock ROM (includes stock radio and SPL). You find it under Support and you enter your s/n to get the correct stock ROM for your device, complete with branding for your operator. You can also find stock ROMS here: http://forum.xda-developers.com/showthread.php?t=471699
4. Flash the stock ROM. Now you have stock ROM and Radio on your device. Stock SPL will not be installed until you've replaced HSPL with an older stock SPL and flashed ROM again.
5. Get RUU-SSPL and stock SPL from HERE:
http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. I used the stock 1.93 SPL. Some instructions and info about restoring stock SPL is in the linked post by cmonex and due credit goes to her. I will repeat some of that info to keep this guide step-by-step. EDIT: Stock SPL 2.03 can be found here: http://forum.xda-developers.com/showpost.php?p=3359191&postcount=390
6. Put the .nbh file from the SPL you downloaded into the same folder as the extracted contents of RUU-SSPL-withoutNBH.zip and run the RUU. This flashes an old stock SPL.
7. Flash your stock ROM from step 3 again. This step is neccessary to get the correct stock SPL on your device, eg. the one that corresponds with the stock ROM you've downloaded in step 3. It was not installed in step 4, because then you still had HSPL. In step 6 you've installed a stock SPL and now the correct stock SPL will flash along with the stock ROM. After this step I got SPL 2.03 on my Diamond.
8. Remove the Security Unlock from your device using the instructions and Security Relocker by Olinex from this post by cmonex: http://forum.xda-developers.com/showpost.php?p=3299516&postcount=492
Now, my Diamond is still SIM-unlocked. I have not managed to find any info about how to restore the SIM-lock, but it is hopefully not neccessary for warranty. As far as I can tell, the unlock doesn't show anywhere, but of course all they need to do is to try a SIM-card from another operator...
If anyone has info about how to restore SIM-lock, then I'll update this guide with that info.
good job...
moderator make this "sticky"
3dward87 said:
good job...
moderator make this "sticky"
Click to expand...
Click to collapse
I second that, it contains links to stock ROMs, that'll hopefully stop a million topics about it lol.
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Da9L said:
This does not work for me.. However i have a problem. the touch screen of my device is not working.. so i can't get pass the allign screen part .. and for somereason the ruu won't connect to phone when it is at tha part so i can't install the spl.. the only way i can do that i through bootloader and it flashes fine but when i then look in bootloader to see the spl it still shows 1.40 olinex..
Click to expand...
Click to collapse
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
where can i read more information about jumpspl, how it works and everything?
eranyanay said:
where can i read more information about jumpspl, how it works and everything?
Click to expand...
Click to collapse
Look in the Xda-wiki, search and google, and not just in the Diamond section.
sticky please
this needs to be a sticky topic.
losdrivare said:
You're right, I tried it too. Flashing SPL through bootloader doesn't work.
You can try using JumpSPL instead, I've attached it in this post. I don't think JumpSPL will require any screen prompts on your Diamond. You can read instructions.txt in the zip, but it's just really the .bat file so you get an idea of what it's doing. Run the .bat, press enter at the prompts and run the RUU for your stock SPL instead of HSPL when asked. At your own risk, I have not tried this myself.
Click to expand...
Click to collapse
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Da9L said:
I have just tried it and it gets stuck where it should run the JumpSPL.exe on the device. After a few minutes it comes with an error:
"ERROR: CreateProcess failed with Errorcode = 30123
- UNKNOWNERROR: 0x000075ab"
This is not good I just think its wierd that because of a broken screen it is impossible for me to get the stock spl flashed back on.
Click to expand...
Click to collapse
Sorry to hear it and I'm afraid I'm out of ideas. After all, my little tutorial is primarily aimed at those whose Diamonds have working screens...
On another note, my Diamond came back from warranty repair and the repair shop had not noticed anything that would void my warranty. In the meantime I got myself a Topaz and now I've sold my Diamond, but I'll be checking this thread from time to time.
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
donsalari said:
Hey thanks bro..!! I need to give mine for reparing..
I have a hardware problem with the reset button.. Do you think I should flash my diamond back to stock? (I don't think they'll check the software right?)
Click to expand...
Click to collapse
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
losdrivare said:
I would restore it to stock anyway. Some workshops actually look for excuses/reasons why the warranty won't apply so I say you'd definitly be taking a risk if you didn't.
Click to expand...
Click to collapse
Very true!!! Ok cool... Flashing back to stock!!
Thanks..
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Da9L said:
Damn.. Hmm anyway then i will have to try the risk and sending it in with hardspl on it.. ! I Hope they won't see it.
Click to expand...
Click to collapse
Another idea: maybe you can find some a VNC program that also works the "other way" with windows mobile, so that you can get a window on your PC with the screen of your device?
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
herpez said:
Hi. I'm an orange user and i dont know what SPL i should use to send back to warranty!
DOes anyone can recommend it please?
My Orange ROM is RUU_Diamond_HTC_WWE_1.93.405.1_Radio_Signed_Diamon d_52.29.25.12_1.00.25.05_Ship
UPDATE - i flashed the new rom and i tried to put the original SPL, however it still showing 1.40 Olinex in the bootloader and it still says security unlocked.
Any help please...
Click to expand...
Click to collapse
k3nnyboiboi said:
Hi I m singapore user i dont know what is the original spl 1.23 ??? i 4get leh can u tell me
Click to expand...
Click to collapse
If you manage to install ANY stock SPL and then flash the correct ROM for your country and operator then you automatically get the correct SPL too, since stock ROMs include SPL. If you go to htc.com and type in your s/n then you automatically get the latest ROM for your device and operator.
k3nnyboiboi said:
bro i try 1.23.000 that version are u sure this is offical stockspl
as i remember it shld be SSPL not SPL somemore when running the tri-boot colour is diffferent from the offical 1
1 . Press volume up restore factory default bla bla bla ..
2 . Press volume down restore factory default and format the internal storage
3 . Press any button to cancel
Where is 2 n 3 ??? gone oridi
Click to expand...
Click to collapse
I only link to the SPLs provided by olipro and cmonex in the hard-SPL thread. If you need closer info about SPLs I suggest you ask there. I only tried to revert back to stock SPL 1.93 myself and it worked just like described in first post.
Thanks Op
Managed to restore it no problem, but took ages