Before doing hard SPL to my Diamond I tried to connect to bootloader using mtty. It was OK. I tried 'info 7' command, gave me nothing though. Then I tried 'info 8' and 'info 2' command it was ok. After these tried I installed Olinex hard spl and it was doing ok but when I tried to connect to bootloader using mtty I failed!!
It said no usb port can't open. I tried hard reset once, the problem still there. Then I tried to flash with new rom 1.37 asian wwe, flashing run well and my Diamond works fine so far. But still can't connect to bootloader using mtty hmm...
factory default rom: 1.35 asian wwe
factory default spl: oops I forgot.
now using spl :1.3 Olinex and rom 1.37 asian wwe
Is there anybody have this problem and how to solve this??
Related
hi guys
i would like to restore hard spl
when i bought diamond it has 1.93 wwe (rom) i dident remmer it hard spl
please help me to restore hard spl
thanx
i can restore it
this way
first i flashed it and install 1.93 wwe
then download this (1.93 and ruu) http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
then copy sspl manual on device and run ruu
So I have an HTC Touch Diamond GSM (DIAM 110)
I want to restore my phone to stock settings. I have done hard reset.
I have an issue where my phone hangs on the "touch diamond" screen. I can get into the boot loader and load (some) stock spls. (Others including stock HTC RUU give error)
When I load stock SPL, phone resets, but upon reset it shows OLINEX still.
What can I do???
i have the same problem
i can´t restore another SPL
i always see SPL - 1.40 OliNex
how can i replace it ?
thank´s a lot
I have ha diamond P3700 with the latest stock rom 2.03xxxNOR (norwegian) ,
Together with this upgrade came the SPL 2.03
I have tried a million times to put HardSPL both from Olinex and the 1.24 , The same problem happens all the time. The phone sync with active sync , can flash original HTC rom , but with any of the hardSPL the phone disconnects after turning black and after a few minutes I get the error message 260 , the phone is not connected. The PC cant recognize the USB device before this happenes.
I`ve tried to run SSPL manually, i`ve tried 4 computers and different USB.
For me it seems like the new SPL 2.03 blockes any attempt of putting something non-stock on my phone Anyway to bypass this???
Hello,
When I bought my Diamond I upgraded it from 1.93PTG to 2.03PTG.
Although, I prefer English interface. So, I hard-spl'd it with OliPro's but I still couldn't flash the 2.03 Europe one.
So, after searching, I found a Hard-SPL 1.24 (followed the instructions) and everything went fine...
Maybe you should try this one also...
Hard-SPL post:
http://forum.xda-developers.com/showthread.php?t=408621&highlight=hard+spl
Best regards,
Nuno
I had the stock NOR 2.03 rom too, and flashed with no problems using Olinex unsigned hardspl 1.40.
Using a WM 6.5 ROM atm, and everything works well
Hi all,
I have 1.40 Olinex HSPL (Official ROM & Radio), this version prevents me from upgrading to the newest Official ROM. It reaches 100% and then shows 270 error and stuck on bootloader no matter what i do, to bring it back again i need to reflash with the old ROM.
I tried to flash the Original SPL (all versions), didn't work (the flash goes well, but the SPL stays 1.40 Olinex), I tried to flash it to a different HSPL (all versions too), still no go...
What should i do ?
Thanks
liamR said:
Hi all,
I have 1.40 Olinex HSPL (Official ROM & Radio), this version prevents me from upgrading to the newest Official ROM. It reaches 100% and then shows 270 error and stuck on bootloader no matter what i do, to bring it back again i need to reflash with the old ROM.
I tried to flash the Original SPL (all versions), didn't work (the flash goes well, but the SPL stays 1.40 Olinex), I tried to flash it to a different HSPL (all versions too), still no go...
What should i do ?
Thanks
Click to expand...
Click to collapse
1.40 Hard spl can not be overwritten as it's protected. You need to search for an app called Jump SPL. This utility will allow you to switch Hard SPL's.
liamR said:
Hi all,
I have 1.40 Olinex HSPL (Official ROM & Radio), this version prevents me from upgrading to the newest Official ROM. It reaches 100% and then shows 270 error and stuck on bootloader no matter what i do, to bring it back again i need to reflash with the old ROM.
I tried to flash the Original SPL (all versions), didn't work (the flash goes well, but the SPL stays 1.40 Olinex), I tried to flash it to a different HSPL (all versions too), still no go...
What should i do ?
Thanks
Click to expand...
Click to collapse
Unpack the attached archive. Connect your device to activesync and run the batch file (diamond-sspl.bat), press enter twice to copy the needed files to your diamond, press enter again and the file jumpspl will start on your device. Press the button on your device, which appears. Now your screen will turn black. Last step is to run your desired SPL. Done
Thanks it worked!
liamR said:
Thanks it worked!
Click to expand...
Click to collapse
You're welcome.
If 1.40 olinex is protected how to back to shippedSPL?
please refer to http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
liamR said:
Hi all,
I have 1.40 Olinex HSPL (Official ROM & Radio), this version prevents me from upgrading to the newest Official ROM. It reaches 100% and then shows 270 error and stuck on bootloader no matter what i do, to bring it back again i need to reflash with the old ROM.
I tried to flash the Original SPL (all versions), didn't work (the flash goes well, but the SPL stays 1.40 Olinex), I tried to flash it to a different HSPL (all versions too), still no go...
What should i do ?
Thanks
Click to expand...
Click to collapse
i have the same as you and i don't have that problem .
I changed 1.40 olinex hardspl to 1.93 without any problem.
Thanks Man
Im having issues with SPL.
Originally, the device came with 1.93, so when I installed I installed hard spl 1.93 olinex.
Now I tried to do sim unlock and the guide asked me to go hspl 1.24, I tried to skip that step and go staright and install the patched radio, but it failed to update - error 226 with RUU.
I thought maybe its related to the hspl, so i downgraded to 1.24 but still I have that issue that I get error 226.
after i downgraded i still see in the bootloader mode spl 1.93 olinex.
I thought maybe to stock spl and then from there to hspl 1.24 and from there to patched radio maybe it will succed.
But even in stock spl it appears spl 1.93 olinex.
Also, besides that, i cant install the patched radio.
I appraciate your help..
Thanks.
I've noticed it the other way around, I first HardSPLed it with v1.40 and some later I flashed v1.93 (I think at least twice), without any error, but the flashscreen still says v1.40. Never had any problem though ...
Can't help you with the SIM unlocking, haven't tried it yet.
with the spl im mostly concerned because one day i might need warrenty and if it says 1.93.olinex..someone will probably suspect..
To Sim-unlock it doesn't matter you have HardSPL(Olinex) 1.40 or 1.93. The most important is your radio, you mut have the Diamond_Radio_1.00.25 intermediate to accept the SIM-unlock proces. Look at the thread .. unlock (sticky) and get the file - Radio downgrade - then you go. The error 226 is related to the radio version !!!
eranyanay said:
Im having issues with SPL.
Originally, the device came with 1.93, so when I installed I installed hard spl 1.93 olinex.
Now I tried to do sim unlock and the guide asked me to go hspl 1.24, I tried to skip that step and go staright and install the patched radio, but it failed to update - error 226 with RUU.
I thought maybe its related to the hspl, so i downgraded to 1.24 but still I have that issue that I get error 226.
after i downgraded i still see in the bootloader mode spl 1.93 olinex.
I thought maybe to stock spl and then from there to hspl 1.24 and from there to patched radio maybe it will succed.
But even in stock spl it appears spl 1.93 olinex.
Also, besides that, i cant install the patched radio.
I appraciate your help..
Thanks.
Click to expand...
Click to collapse
just flash this Spl : http://forum.xda-developers.com/showthread.php?t=400402 and then your problem is solved use the first zip download it worked with me
I've got a Diamond from orange(Diam100) and I want to flash it with a new fra rom; I have tried HardSPL 1.40/1.93 OliNex, using the RUU, and by loading the device into the bootloader manually from USB, using the Diamond-sspl.exe, but it blocked at "Loading...", "0%" and nothing at all. I can't figure out what i's wrong!
the original on is : spl-1.37.0000
i found some one did use SSPL and he had the same problem diam100 orange spl 1.37
but i don't know how i can do it ????