Hellow from Slovenia. I have a problem with my Desire, i have tryed to flash my phone over the recovery (not my first time) and i used usb ms togle for transfer update files .. then i restart the phone and i cant acess sd card any more, the phone also not charge by using usb cable... what can i do?? ...
TNX
Related
Howzit guys
So, I was copying some stuff to my SD card via USB cable from the PC. Now on the phone, it says Mount/Read only..try tapping.. (I cant see the rest of the message)
I tried turning phone off and on with and without card. Wont mount
I dont have a microSD adaptor or another phone to put it into either. Anyway I can just format it with the phone??
Please help!
Thanks!!
Managed to fix this.
Rebooted into recovey - selected USB Toggle - showed up on PC after that - then just formated and rebooted phone.
All working again.
Was odd though??
Hi guys, I am having a problem with my HTC WFS a510c, I am trying to follow this guide here (http://forum.xda-developers.com/showthread.php?t=1399872) to s-off the phone, but I am unable to get the phone to connect in "disk drive" mode. I have the drivers installed, the computer recognizes the phone and shows the drive in explorer but does not show up in the gold card creator. Or when trying to open it from explorer it says "please insert a disk". The last time I connected through the usb cable this worked fine i was able to move pictures and music back and forth, but as soon as I went to try this it wont work. Any ideas or help would be appreciated. Thank you guys in advance.
Did you select mass storage in the menu that comes after connecting the usb??? And BTW you need to use a Card reader to create a goldcard.
csoulr666 said:
Did you select mass storage in the menu that comes after connecting the usb??? And BTW you need to use a Card reader to create a goldcard.
Click to expand...
Click to collapse
I did pick that option on the phone when it asked, ive had it working in the past.
Thank you for the advice on Gold Card Creator, I was just confused in the guide it said to plug the phone in and pick mass storage mode. Will try using my card reader thank you again.
Thank you for the tip about using a card reader, I am now S-off and Rooted, thanks again.
The only problem I am having is my phone is still not functioning as a USB storage device
could be a hardware problem on the phone......try another usb cable.....it might be that your usb cable is malfunctioning
csoulr666 said:
could be a hardware problem on the phone......try another usb cable.....it might be that your usb cable is malfunctioning
Click to expand...
Click to collapse
Ill give that a shot, and hopefully that will solve it. It's just been an odd problem because the computer recognizes the phone and installs drivers and everything just now joy with storage mode.
my storage mode stopped working after i installed link2sd and made an ext2 partition. wifes still works with 2 FAT32 partitions using the same cable.
Mine stopped working before I did link2sd or data2sd, not sure what caused it, just ordered a new cable today and sd card, to see if that helps it.
Dburdett84 said:
Hi guys, I am having a problem with my HTC WFS a510c, I am trying to follow this guide here (http://forum.xda-developers.com/showthread.php?t=1399872) to s-off the phone, but I am unable to get the phone to connect in "disk drive" mode. I have the drivers installed, the computer recognizes the phone and shows the drive in explorer. Or when trying to open it from explorer it says "please insert a disk". The last time I connected through the usb cable this worked fine i was able to move pictures and music back and forth, but as soon as I went to try this it wont work. Any ideas or help would be appreciated. Thank you guys in advance.
Click to expand...
Click to collapse
i have ANDROID 2.2.1 HTC WILDFIRE AND i experience the same exact problem,
i think the problem is in the phone as i tried another pc and it did the same
i've reached a solution but its retarded and time wasting which is restarting the phone (and sometimes the pc) which also tell me that its not a usb cable problem...
i still searching for a radical solution for this damn problem
any help will be appreciated
PHP:
hi friends,
today i update my hox with the new firmware orange uk to jelly been and after i install ARHD 18.
After the instalation complete the phone turn on normaly everything is working good.
the only problem is the phone lost all photos,music,and videos i got there.
is any solution to get all my data back
thanks
regards
Hello,
Try using one of these softwares:
http://lifehacker.com/5237503/five-best-free-data-recovery-tools
Good luck...
i have try the software u said.
but the problem is they dont detect the internal memory of the HOX.
after uptade to jelly bean when i plug the usb cable dont appear like in ICS for choose to charge or to hard disk.
so how to solve this?
thx regards
did you looked on pc also...? it can also be that you must update htc sync because of the mtb thingy.....second should be look for an sd speed app..and set it to 128 instead of most 2048.....
if that also fail...the data should be gone...maybe a wipe script that also wiped sd card or something like this
go into recovery and mount usb storage
hi
i have try go to recovery with clockworkmod and if i try to mout sd card nothing happen.
i choose mount sd card and then i reboot the phone and apears unmout again.
and in the phone if i go to settings and storage on the bottom said USB Storage device is not available.
thx
regards
badscorpion said:
hi
i have try go to recovery with clockworkmod and if i try to mout sd card nothing happen.
i choose mount sd card and then i reboot the phone and apears unmout again.
and in the phone if i go to settings and storage on the bottom said USB Storage device is not available.
thx
regards
Click to expand...
Click to collapse
what version of cwm...htc sync updated..?
yes htc sync is updated and the cwm is 5.8.4.0.
thx
so from that side all ok...if you are in a file explorer...and go to sd..you see something...? if yes..try to mount from clockwork...if not work...try to copy the files with adb
Tough luck brother, if all else fails then deal with it. Many, including me, have faced the same. Good luck to you.
When you mount the USB mass storage in recovery you have to stay on that screen or it will auto-unmount. Once you've done that load up Recuva from Piriform and scan for the phones storage on the pc.
Hi there guys
I've just Rooted my HTC WILDFIRE (buzz) to the Cyanogenmod 9. I really enjoyed the speed and new functions I have on my phone now.
However, when I try to insert my USB cable into the USB port of my destkop, I can't see my phone storage. I tried to 'reinstall' CM 9 but it still doesn't work. I've tried it on different USB ports and computers, but my phone isn't recognized anywhere.
My SD card is not 'dead' or anything, cause I am still able to install apps from the store on it.
Anybody who can help me out here ?
EDIT: I managed to get on my storage again via recovery, but do I have to do this each time if I want to remove or add something on my phone/sd card via USB ?
BlackC said:
Hi there guys
I've just Rooted my HTC WILDFIRE (buzz) to the Cyanogenmod 9. I really enjoyed the speed and new functions I have on my phone now.
However, when I try to insert my USB cable into the USB port of my destkop, I can't see my phone storage. I tried to 'reinstall' CM 9 but it still doesn't work. I've tried it on different USB ports and computers, but my phone isn't recognized anywhere.
My SD card is not 'dead' or anything, cause I am still able to install apps from the store on it.
Anybody who can help me out here ?
EDIT: I managed to get on my storage again via recovery, but do I have to do this each time if I want to remove or add something on my phone/sd card via USB ?
Click to expand...
Click to collapse
More probably a problem of drivers.
Quick solution : Disable USB debugging on your device before connecting in USB Mass Storage Mode.
Permanent solution : Uninstall and re-install USB drivers
HTH
Hi,
i have a problem with mass storage on wildfire s 2012 (s-on, rooted ,cwm 5 recovery).
The problem is on 2 roms (only 2 that i flashed on wfs), but these situations are bit different:
1. For a some time, i was using owl project (i mean android 4.2.2) , and when i connect usb cable, i have an option to enable usb mass storage, but my computer doesn't see sd card.
2. Then i flashed Marvellous Sense 3.5 (7-10-13...the newest release anyway) (full wipe before of course), when i connect usb cable, the phone only charges, there is no popup or sth to select usb connection options.
Both problems, are not present at the first usb plugging, after flashing a rom, they appear after next ones.
Maybe this can be helpfull tip: mounting usb mass storage in recovery setting doesn't work too (when i want to copy anything to the phone, i need to reflash and boot a "fresh" rom).
I was searching the solution on ROM threads but, there is no mention of any usb problem.
I'm sure the usb cable is working properly, i've tried it to connet other phones and all is working properly.
I believe that someone will help me, I'm noob in Wildfire S, thanks in advance
banangrg said:
Hi,
i have a problem with mass storage on wildfire s 2012 (s-on, rooted ,cwm 5 recovery).
The problem is on 2 roms (only 2 that i flashed on wfs), but these situations are bit different:
1. For a some time, i was using owl project (i mean android 4.2.2) , and when i connect usb cable, i have an option to enable usb mass storage, but my computer doesn't see sd card.
2. Then i flashed Marvellous Sense 3.5 (7-10-13...the newest release anyway) (full wipe before of course), when i connect usb cable, the phone only charges, there is no popup or sth to select usb connection options.
Both problems, are not present at the first usb plugging, after flashing a rom, they appear after next ones.
Maybe this can be helpfull tip: mounting usb mass storage in recovery setting doesn't work too (when i want to copy anything to the phone, i need to reflash and boot a "fresh" rom).
I was searching the solution on ROM threads but, there is no mention of any usb problem.
I'm sure the usb cable is working properly, i've tried it to connet other phones and all is working properly.
I believe that someone will help me, I'm noob in Wildfire S, thanks in advance
Click to expand...
Click to collapse
Have you tried plugging the SD card on your PC via a card reader? There could be a problem with the phone's MicroUSB port. Also try using another cable if you have one.
csoulr666 said:
Have you tried plugging the SD card on your PC via a card reader? There could be a problem with the phone's MicroUSB port. Also try using another cable if you have one.
Click to expand...
Click to collapse
It looks like wutg, the phone's MicroUSB port is something wrong.