[HELP] WFS 2012 mass storage problem - HTC Wildfire S

Hi,
i have a problem with mass storage on wildfire s 2012 (s-on, rooted ,cwm 5 recovery).
The problem is on 2 roms (only 2 that i flashed on wfs), but these situations are bit different:
1. For a some time, i was using owl project (i mean android 4.2.2) , and when i connect usb cable, i have an option to enable usb mass storage, but my computer doesn't see sd card.
2. Then i flashed Marvellous Sense 3.5 (7-10-13...the newest release anyway) (full wipe before of course), when i connect usb cable, the phone only charges, there is no popup or sth to select usb connection options.
Both problems, are not present at the first usb plugging, after flashing a rom, they appear after next ones.
Maybe this can be helpfull tip: mounting usb mass storage in recovery setting doesn't work too (when i want to copy anything to the phone, i need to reflash and boot a "fresh" rom).
I was searching the solution on ROM threads but, there is no mention of any usb problem.
I'm sure the usb cable is working properly, i've tried it to connet other phones and all is working properly.
I believe that someone will help me, I'm noob in Wildfire S, thanks in advance

banangrg said:
Hi,
i have a problem with mass storage on wildfire s 2012 (s-on, rooted ,cwm 5 recovery).
The problem is on 2 roms (only 2 that i flashed on wfs), but these situations are bit different:
1. For a some time, i was using owl project (i mean android 4.2.2) , and when i connect usb cable, i have an option to enable usb mass storage, but my computer doesn't see sd card.
2. Then i flashed Marvellous Sense 3.5 (7-10-13...the newest release anyway) (full wipe before of course), when i connect usb cable, the phone only charges, there is no popup or sth to select usb connection options.
Both problems, are not present at the first usb plugging, after flashing a rom, they appear after next ones.
Maybe this can be helpfull tip: mounting usb mass storage in recovery setting doesn't work too (when i want to copy anything to the phone, i need to reflash and boot a "fresh" rom).
I was searching the solution on ROM threads but, there is no mention of any usb problem.
I'm sure the usb cable is working properly, i've tried it to connet other phones and all is working properly.
I believe that someone will help me, I'm noob in Wildfire S, thanks in advance
Click to expand...
Click to collapse
Have you tried plugging the SD card on your PC via a card reader? There could be a problem with the phone's MicroUSB port. Also try using another cable if you have one.

csoulr666 said:
Have you tried plugging the SD card on your PC via a card reader? There could be a problem with the phone's MicroUSB port. Also try using another cable if you have one.
Click to expand...
Click to collapse
It looks like wutg, the phone's MicroUSB port is something wrong.

Related

No usb connection

I have a problem which has just started happening.
When I plugin my desire the led lights up orange and indicates its charging but I can't select a connection mode. ie charge only/file transfer etc.
If I boot into recovery CM 5.0.2.0 go into mounts and storage and choose usb mass storage then the drive doesn't appear under windows.
I never had any problems till yesterday when I update my ROM, Recovery etc was unchanged.
Win 7 x64, Runnymede 4.0[CM7r2]
Update: Damn don't I feel stupid, usb connection had come loose for the hub all working properly lol
d3xp2pc said:
I have a problem which has just started happening.
When I plugin my desire the led lights up orange and indicates its charging but I can't select a connection mode. ie charge only/file transfer etc.
If I boot into recovery CM 5.0.2.0 go into mounts and storage and choose usb mass storage then the drive doesn't appear under windows.
I never had any problems till yesterday when I update my ROM, Recovery etc was unchanged.
Win 7 x64, Runnymede 4.0[CM7r2]
Update: Damn don't I feel stupid, usb connection had come loose for the hub all working properly lol
Click to expand...
Click to collapse
Is your sd card partitioned? If so, repartion it . If not try to clear your sd or get a new one .
Greetz
Sent from my HTC Desire using XDA App
jory9 said:
Is your sd card partitioned? If so, repartion it . If not try to clear your sd or get a new one.
Click to expand...
Click to collapse
Question has already been solved. Read the first post carefully

Can't connect to usb data. Should I unroot?

Hai,
Up until recently my Evo 4G connected to my computer with a USB data cable fine to both of my Win 7 x64 computers. Not to long ago I flashed a rom of MIUI (can't remember which), and my data cable stopped working. Sense then I have bought a new cord, flashed new roms, installed drivers (I didn't see x64 ones), uninstalled/reinstalled HTC Synch. Nothing works.
When I plug in the phone Windows makes the usb connect "ding" noise, then a pop up says the usb device could not be identified. If I wiggle the cord Windows makes the ding noise making me think the phone is only partially connecting? When I connect it nothing pops up on the phone itself. The charge light only comes on.
What should I do?
Hey,
Try booting into the bootloader and mount usb or toggle usb depending on your recovery and that should fix the problem if not, it might be an issue with MIUI! It has been giving me trouble when I tried to flash it so I couldnt use it, but many times between roms and kernals sometimes you will loose usb and it isnt the cable! try flashing a new rom and let me know how it goes!
stevo!
Hit the thanks if I helped!
I went into recovery and mounted usb, and sd card and the windows pop up came up. It said the usb device has malfunctioned, and windows could not recognize it. Same thing when I reboot. Seems to connect/disconnect when i move the cord with that pop up anytime it does connect.
I've flashed CM7 nightly sense then and now I am on [10-11-11][ROM] gingerbread-evo-deck [1.3][2.3.7 Stable] #Stablistic. I did notice when I click the pop up in windows it takes me to the info page for the unidentified usb and it says there is no driver installed for it.
Alright, I have two guesses.
I am glad you were able to mount it, and as long as it is reading i really dont think its the cord.
Now did you partition your sd card? because if you did you turned it to a linux file and your windows pc cannot read that
can you reformat your sd card and try it again?
If you keep having issues pm me.
I have had problems with that on my wifes lg optimus so what i did i took out the SD card and downloaded Mini tool partition wizard home edition 7 i used this to reparation the sd card and then reinserted the sd card and it worked after that. note i did put a ext 3 partition on the sd card. also if you have two primary partitions on the card widows will only recogize the first one. not sure if that is the issue in this case but i hope this helps
here is the partition wizard download
http://www.partitionwizard.com/free-partition-manager.html

[Q] How to run USB OTG on HTC ONE X ???

I have a stock jellybean 4.1.1 how I Am able to run USB ON the go on my HTC One X ??? any suggestions. is it ok to install custom kernels on a stock rom to run usb OTG ??
It works on stock kernel.
Sent from my IceCold One X
just connet usb otg cable and it works (most usb otg cables from ebay works great)
if it doesnt work, check file system on your usb disk (for me works only fat32 on stock)
Mato_K said:
just connet usb otg cable and it works (most usb otg cables from ebay works great)
if it doesnt work, check file system on your usb disk (for me works only fat32 on stock)
Click to expand...
Click to collapse
I got 16 gb kingston Usb when ever I plugged that it hanged and restart my phone otherwise mouse and card readers memory cards working upto 32gb
did you try format it?
Mato_K said:
did you try format it?
Click to expand...
Click to collapse
yes i tried every format on usb and is perfectly working on pc !!
how can i use that 16gb usb on USB OTG ?? whats the reason for working
Hook it up and check in settings - storage. Scroll all the way down, there should be info about usb on the go
annus9214 said:
I have a stock jellybean 4.1.1 how I Am able to run USB ON the go on my HTC One X ??? any suggestions. is it ok to install custom kernels on a stock rom to run usb OTG ??
Click to expand...
Click to collapse
1-trying istalling Lidroid File Managar
2-connect OTG cable and mass storage
3-enjoy
elmanortega said:
1-trying istalling Lidroid File Managar
2-connect OTG cable and mass storage
3-enjoy
Click to expand...
Click to collapse
mouse and micro sd card via card reader is working except my 16gb usb and i tried with every format but still the same result phone restarts !! any reason or seggestion please ??
you said that is working...so i think that can be the 16gb sdcard that can be corrupted or damaged i think so...also try installing original software
I have a strange request, it has happened that after removing a usb drive, the phone no longer recognizes photos and music stored to sdcard?
With es file manager I see the files, but there isn't in galley or music
Anyone can help me??
Sent from my HTC One X+ using Tapatalk 4 Beta
Follow up on USB Host
I too am using an HTC One X running 4.1.1
I've got an OTG cable and have tried connecting a thumb drive and card reader. Both work. The drives are visible and accessible on the phone. That's USB storage which isn't the same as USB Host, but it shows that the port is active.
I can plug in the dongle for a wifi mouse, it too is recognised and I'm able to use the mouse to navigate around on the phone. This, as far as I understand, is actually USB Host in action.
The problem arises when I try to connect a DSLR and use a camera controller app like Helicon Remote or DSLR Dashboard. The app doesn't recognise that the camera is connected.
What's the difference between the wifi mouse and the camera?
Thoughts appreciated. Thanks.
In fact, there is a problem that any USB storage device on the phone creates the following folder structure:
/ storage / usb / Android / data / com.htc.album / .thumbnails /
Then create multiple copies, can be found in the internal memory, same-path, including folders that contain thumbnails, but empty.
So because of these being used constantly sticks, so when the capture traces of the settings, then any writes to the phone to choose from, but it can not happen, but the capture button will be disabled, but only while again not I step into the menu.
The above mentioned directories erased because the phone reboot always create them again.
If the phone was not rebooted since I've used it and the flash drive has been physically removed it, then if I connect again, it appears no file until you restart the phone.
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
sudhanmalla said:
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
Click to expand...
Click to collapse
Exactly the same.
I have the same problem. I wrote message to HTC so I'm waiting for respond
sudhanmalla said:
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
Click to expand...
Click to collapse
Got any solution for this??

strange usb connection problem

i have tried searching threads for this problem but i only got confused....i hope some good people can help me with my note 2 international version problem....the pc does not detect my device...it has been a recent problem....it used to be detected by the pc but now it cant be detected...i also have tried different pc and cables and same results...it cant be detected as a usb storage device...funny thing about it is it charges and works well with otg cable...i tried connecting a mouse and a keyboard and it works...also can read usb flash disks....the only problem is i cant acess its internal contents because it not shown on pc.... i suspect it has something to do with a software....anybody please help me out in here....iam also currently project aosp rom,,,,i used xnote rom but usb connection is not detected as well...i also tried reverting back to stock rom but still no luck being detected,,,iam planning to format the internal sd card and installing stock rom to see if it fixes the problem...if anyone out there willing to help please do so...much appreciated...thanks in advance.....
white_wolf29 said:
i have tried searching threads for this problem but i only got confused....i hope some good people can help me with my note 2 international version problem....the pc does not detect my device...it has been a recent problem....it used to be detected by the pc but now it cant be detected...i also have tried different pc and cables and same results...it cant be detected as a usb storage device...funny thing about it is it charges and works well with otg cable...i tried connecting a mouse and a keyboard and it works...also can read usb flash disks....the only problem is i cant acess its internal contents because it not shown on pc.... i suspect it has something to do with a software....anybody please help me out in here....iam also currently project aosp rom,,,,i used xnote rom but usb connection is not detected as well...i also tried reverting back to stock rom but still no luck being detected,,,iam planning to format the internal sd card and installing stock rom to see if it fixes the problem...if anyone out there willing to help please do so...much appreciated...thanks in advance.....
Click to expand...
Click to collapse
first uninstall kies and samsung driver ,reboot.
reinstall samsung driver it will try to update just cancel the update and it will install fine. do not install kies now plug in your usb to the pc and then to the phone.
if it detects good if not then the usb flex of the phone is the culprit take it to ss for a repair and be ready to make it all stock and status normal and yes despite the bad flex it does charge the phone gone through the same prob before
I used to have a galaxy s 2 it would not be detected on the pc..because while it was charging at one time it fell down the whole weight of the phone landed on the stub/pin of the charger...it continued to charged though... took it to Samsung repair store they just changed a small circuit board which had the charger and Mic...very simple and fast hardly 5 min...if all fails for you..try this option
Sent from my GT-N7105 using Tapatalk 4
white_wolf29 said:
i have tried searching threads for this problem but i only got confused....i hope some good people can help me with my note 2 international version problem....the pc does not detect my device...it has been a recent problem....it used to be detected by the pc but now it cant be detected...i also have tried different pc and cables and same results...it cant be detected as a usb storage device...funny thing about it is it charges and works well with otg cable...i tried connecting a mouse and a keyboard and it works...also can read usb flash disks....the only problem is i cant acess its internal contents because it not shown on pc.... i suspect it has something to do with a software....anybody please help me out in here....iam also currently project aosp rom,,,,i used xnote rom but usb connection is not detected as well...i also tried reverting back to stock rom but still no luck being detected,,,iam planning to format the internal sd card and installing stock rom to see if it fixes the problem...if anyone out there willing to help please do so...much appreciated...thanks in advance.....
Click to expand...
Click to collapse
Reboot your PC.

[Q] USB STORAGE not detected/working

Hi there guys
I've just Rooted my HTC WILDFIRE (buzz) to the Cyanogenmod 9. I really enjoyed the speed and new functions I have on my phone now.
However, when I try to insert my USB cable into the USB port of my destkop, I can't see my phone storage. I tried to 'reinstall' CM 9 but it still doesn't work. I've tried it on different USB ports and computers, but my phone isn't recognized anywhere.
My SD card is not 'dead' or anything, cause I am still able to install apps from the store on it.
Anybody who can help me out here ?
EDIT: I managed to get on my storage again via recovery, but do I have to do this each time if I want to remove or add something on my phone/sd card via USB ?
BlackC said:
Hi there guys
I've just Rooted my HTC WILDFIRE (buzz) to the Cyanogenmod 9. I really enjoyed the speed and new functions I have on my phone now.
However, when I try to insert my USB cable into the USB port of my destkop, I can't see my phone storage. I tried to 'reinstall' CM 9 but it still doesn't work. I've tried it on different USB ports and computers, but my phone isn't recognized anywhere.
My SD card is not 'dead' or anything, cause I am still able to install apps from the store on it.
Anybody who can help me out here ?
EDIT: I managed to get on my storage again via recovery, but do I have to do this each time if I want to remove or add something on my phone/sd card via USB ?
Click to expand...
Click to collapse
More probably a problem of drivers.
Quick solution : Disable USB debugging on your device before connecting in USB Mass Storage Mode.
Permanent solution : Uninstall and re-install USB drivers
HTH

Categories

Resources