dear all,
please some help. i have already try to update ROM to WM6.5 on my HTC DIamond. But something happen during updating, the screen didn't show progress and anything. and suddently the screen on the computer said that updating ROM Fail. and my device cannot weak up since then.
Please help me weak up it.
Thanks, and i tried to effort to go inside bootloader by pressing volume down and red reset but nothing happen.
Related
hi i am newb here, i just installed the wm6 rom to my phone dopod m700, after it has complete installed, a white screen say error device start up failed due to sudden loss of power. please click yes to continue and note do not remove battery before di=evice has been completely shutdown. i did clicked yes to continue, but the screen came back the same, please some one help, thank you
I'm having the same problem with WM6...any ideas? Sometimes it boots normally, sometimes it is just stucked ony the HTC Logo (i'm running Touch Full Version of meschle's)
And there are times that the 128MB Flash doesn't seem to be detected...
Dear all,
I need help in repairing my Asus p525. I was trying to flash it to WM 6.1, but suddenly update failed. After that i started getting asus Blue Screen, and nothing more. I cannot hard reset, neither turn on the PDA. When I take out the battery, I can, by pressing CAM REC JOY and SOFT RESET button to get to USB loader.
I used USB loader and reinstalled my ROM and Boot Loader to Official Release of Asus. But this didnt help and I still get only Blue Screen, and after that nothing - unless I take out my battery for a while and return it.
Can anyone help me with this problem ?!
Greetings
New thing
Last night I took my battery out of the phone. Today I dont even have ASUS BLue Screen, but still i can, while holding the buttons, on reset (inserting the battery) to go into FORCE MODE.
Anyone know what to do ??
Today I reflashed with new roms, but it just dont work.
Greetings
I realised now, that when I charge the battery FULL, the phone starts working ?! First i have problem to calibrate the screen, and later on the OS start to work, and everything seems fine ?! But it resets, block..... hardware thing ?
2 days ago i was playing with my touch diamond and it held when i switched on WIFI (wifi was working fone for a year now). When i rebooted the phone froze at the screen where Touch Diamond is written and at bottom right some info regarding ROM/Radio/SPL etc (R 1.09.25.23 G 52.51.25.26H D 2.03.00.00).
Tried many times but couldn't boot it . Just when i was about to get hopeless it started booting if i hold volume down, enter and press reset pin on the screen still taking too long. As i had stock HTC ROM so i upgraded it to the latest to see if it solves the problem. After upgrade phone would still boot randomly by trying the Reset pin and the mentioned button but after a few trys that also stopped working.
Now the phone is stuck on the same black screen, i can only resintall the latest Rom and All the way mentioned on the forums dont work for me i have tried signed unsiged soft and hard spl or direct Custom ROM upgrades but nothing goes beyond 0 %.
All the SPL upgrade articles require to copy jump spl. exe to the phone but i can do that as i am unable to create a Active Sync relationship (Eventhough i have tried upgrade by manually going into the tri color screen by holding volume down button while booting it).
The Hard Reset option allows me to hard reset but has no effect on the phone's condition.
anybody who could help me out here?
hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
umer92 said:
hey, i have been using htc s630 from last year.
few days later when i was making a call, the phone got stuck and hang in the incall position, when i removed battery and restarted it again, the phone got stuck welcome screen.
i have done the steps to flash it from pc but it doesn't work,
please help me ot to get my phone back..
Click to expand...
Click to collapse
use the method MTTY to fix it, after that reflas with official rom
hey, i have tried every thing for couple of weeks, but its not working for me, as when my cell phone restarts it stucks on the welcome screen, is there any way to delelete the operating system and install it again?
Sequence for recovery is (don't execute the next step if one gets your device back to life):
Soft Reset (Reboot) - this did not help obviously as you wrote.
Hard-Reset - mind that first boot will take much longer than usual, some minutes (up to 10 - depending on the device) will pass until the device is ready again. This is because all operator and init-specific things must be executed on the device with first boot. Be patient and do not interrupt - it must finish by itself. -You may just be stuck here!
Re-Flash the right shipped ROM - mind that the device can only receive the CID matching original ROM, not just any ROM (yet). You must do that while the device is waiting in bootloader mode, otherwise the RUU may not be able to access the device.
Gold-Card Flash a close-matching ROM (so one with same languages and the right device).
Please describe in detail what you did already and what were the results of your actions.
hey thankz, but i tried everything, all the steps you written above i them them all, nothing happened,, please help me,, my fon is stuck for couple of months.. it just shows the welcome screen, nothing else.. is there is a way that i can flash the operating system and reinstall it??
waiting..
bring the device to go into bootloader mode by Hold the camera button on the right side, press the power button. The phone will enter the " bootloader " mode and you 'll see the tricolor boot screen. after that reflash the device with shipped rom can you get at ftp://xda:[email protected]/Uploads/Smartphone/Cavalier/Shipped_Complete_Updates/Dopod/
Hello,
I recently tried to update this device with the latest MALAY MOD rom.
The problem was that I didn't had the option to remove all data while updating. Thus resulting in an corrupt install.
I need to get into recovery mode now to install the rom from there, however I do not know how to enter recovery. I've tried all the possible ways that I could find without result.
The touchscreen buttons don't seem to give input to the device.
The reset button immediately shuts off the device, while holding it the unit stays off. When released the device starts up and gets stuck on boot logo.
Does anyone have an idea?
Hello everyone, Please someone could help me with this problem, I know it has a solution but I'm new to this area, for helping me.
Same issue still searching on this forum for something. Don't understand what is the use of RST key provided when it doesn't work as expected.