Related
I tried to upgrade my rom but the process crashed. The utility mtty doesn't work because when I connect the universal, boatloader mode by the cable, to the pc, it says "USB not recognized" (sometimes when I connect the computer is frozen till I disconnect the cable of the universal)
Please, I tried to have some solutions in the forum but all the posts indicates is needed previously the usb connection.
Do you know if should be possible to run the flash of the rom in other way, for example using a serial cable connected into the miniusb of the universal, because the boatloader screen says "Serie, v.1.01"
I apprecite what you can say please, I'm really in a hole.
Try this...
Try taking out the battery for a few minutes (10-30mins) and reboot your PC then repeat upgrade process. Hope that helps. Good luck!!!
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
The only thing I found that worked was to try a different PC, then it was fine...
Click to expand...
Click to collapse
In my case it still happening in other computers. Conclussion: some piece of the software in the universal has been lost. The screen shows "Serial" that means on some way that is opened to comunication but not USB.
My questions are:
- should be possible to put some starting software in SD and do the universal boot on it.
- do you know how to connect to the computer COM! port from the usb miniport of the Universal.
I appreciate, I was not planning to replace now the Universal...
beginner said:
sl9 said:
I have the same problem on my PC at work, it's caused by a poor USB chipset in the PC, or trying to connect through a USB hub.
Now works.... I still thinking windows is so stupid software made for distroy our mind ....
Solved after install drivers for a converter usb -rs232 ( I was looking for the way to connect from rs232 the universal)
I'm happy again and I promise don't try to change rom again (at least for a while)
If some person is interested in what brand of software/hardware I installed, send me a mail...
Thanks hearing me ...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
zedino said:
i have the same problem with my friend's uni
does it mean that you don't have to own any adapter, just have to install drivers for USB to RS232 adapter
if yes, where to find it?
thanx
respectfully
ZeD
Click to expand...
Click to collapse
I want to say that is running after doing some things and obviously some of it solved my problems. I made:
- unistall last version of activesync and go back to version 4.0
- delete all the applications using ports usb.
due the connection still not running (windows message: device not recognized) and because in the screen of universal I saw: "COMM1" I tried to connect from computer port rs232. By that I purchased some special cable, name: hama brand, rs232 serial, 9 pin - usb.
As you can imagine all the steps I followed were followed by the typical restart of windows. In this sense is important to say that the universal, after connect, need to do a soft reset each time (again windows....)
Other comment is that I unmark the option to connect by usb in activesync and mark the connection by com1.
and after all was done, connecting by usb the unniversal, kill wcescomm, windows said "NEw usb device, sync device". I started mtty and now appears the USB option, great! same time the screen in universal changed from comm1 to usb, more great....
and that's all.
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
zedino said:
does it mean you solve your problem using special USB 2 RS232 connector?
ZeD
PS: it was my first idea , but i still believe i can solve the problem using USB port
Click to expand...
Click to collapse
I think my english wording was not fine. I mean I solved my problem after install the sofware -drivers- of the rs232 connector, but connecting to the universal by usb as on standard way I was syncronizing previous the crack with activesync.
OK, where to get this driver?
thanx
?????????? NOTHING ?????????????
zedino said:
OK, where to get this driver?
thanx
Click to expand...
Click to collapse
Try here.
http://www.hama.de/portal/type*3/action*1026/searchMode*1/q*039703
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
shrubbery said:
I have had the same problem several times now (search the forum for the thread).
I tried three different PC's/laptops and three different USB cables all with the same error as yourself.
Eventually I got a connection but the laborious process of trying - failing, restarting windows and soft resetting the phone, trying - failing........... until it finally worked. I did nothing differently the time that it worked but the strange thing is that it has worked every time since! Maybe the USB driver the phone has a bug in it that causes it to get 'stuck' in a mode where it will no longer correctly operate but once you have managed to 'kick' it into action it seems toi then carry on working.
It was also a ROM upgrade that caused my USB phone driver to stop functioning. Maybe the fact that the phone has a slightly diffferent software configuration after the upgrade but exactly the same hardware fingerprint causes the driver to fail.
Every time that I have had this problem it is after an upgrade but once I have gotten it to work once with the new ROM, it always continues to function - until the next upgrade.
Click to expand...
Click to collapse
not works, probably is this device lost forever, i have restarted device and PC almost hundred times, still the same result, uni stuck in Bootloader screen top of page "Serial" bottom of page "v1.00"
nothing changed, even if i connect to USB port
if someone have some solution to this s*it pls let me know
thanx
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
no, my problem persist, hundred times i tried to recover friends device using upgrade by original shipped ROM but the device is not recognized by system so there is allways connection error, so this kind of reliving this UNI is not usable
anyway, thanx for raply and suggestion
ZeD
mrijnvis said:
i have had the same. my device wast recognized by my pc, bur i used maupgradeno_id and installed a other rom, even installed the original rom from qtek (latest) then after i was finished it started then i tried the other rom and it was working. ( pc did see a unknown device ) hope you have the same and its working also.
good luck
Click to expand...
Click to collapse
If you're stuck in bootloader mode only, visit www.buzzdev.netand look for ExitBootloader utility written by the great Buzz. Just follow his instructions or scroll thru' Universal's forum here and there for problems relating to "stuck in bootloader"
hope this helps
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
i had the same problem with the QTEK of my principal after I upgraded his ROMs.
(after the hard reset, the pocket remained in bootloader mode).
you can solve this problem in a very simple way:
you have to launch the bootloader installation (BL1.01_RUU_UNI_V.1.2.EXE) from the PC (still connected with the PPC through USB) while the PPC is in bootloader mode (on your display you see "USB > Serial 1.01" or something like that).
then you do a SOFT reset and the pocket boot normally.
very simple.
i hope to be helpful to someone.
zedino said:
no device is not recognized by PC so any trying to use exitbl is not available, anyway this option was one of the first what i have tried
thanx anyway
ZeD
Click to expand...
Click to collapse
I had some problem. After uninstall all usb applications in the pc and install the software for cable usb -rs 232, doing some softreset in the pda connected, it turned the screen message "Com" by "Usb"
Hi, I have reflashed my ROM I dont know how many times. Yesterday I tried to connect via activesync on a new ROM and it wouldnt connect. These are some of the things that happened:
Device orange charging light flashes a few times then goes off [never seen THAT before]
Activesyc menu comes up on device but activesync doesnt connect
Get 'this device can perform faster' message on desktop
Sometimes get USB devce not recognized on desktop
SOmetimes device orange charging light it stays on if I plug direct into PC but still doesnt activesync
I have tried to connect as DISK DRIVE but I dont see the device on my PC.
Have tried different ROMS, 6.5, 6.51, sense 2.1 and 2.5 but all have same issue. Have also tried connecting to other computers. same issue.
Have played around with USB to PC menu options (enable / diable faster data sync etc) but doesnt make a difference.
Anyone had this problems? Thoughts?
Have you tried diselecting "ask me 1st about usb connection type when I connect the device to the pc" under USB to PC settings
It worked for me
This is the exact problem I am facing!
I tried everything - as diskdrive, activesync (with/without speedup), etc.
On many ROMs, even the original one (WM6.1)
Can't connect - every PC gives an 'unknown device' and on some ROMs I cannot charge via USB, only via mains...
I also tried without the question on connection.
Just some thoughts:
Do you have corruptions on screen sometimes? (Some graphical glitches)
Any .CAB files you cannot install?
Did you try to reflash the same ROM more than once?
tried to connect without card in the device and in flight mode? (Uses less power)
With me it started after a ROM flash from Miri... (I don't blame him!!)
The Hard SPL did not give me any problem, the radio was not flashed, just the OS. But reverting did not help.
I certainly hope you will find a solution, since I have the exact same problem!!
Do you stil know what ROM you flashed when this problem occured?
I reverted to original ROM 6.1 AND 6.5 which included everything - boot, radio, os, stardup image. But it did not change!
I figured it out after trying everything i could: i think its a hardware problem. I have dropped my devicetoo many times, or plugged it in too many times. Who knows.
ekerbuddyeker said:
I figured it out after trying everything i could: i think its a hardware problem. I have dropped my devicetoo many times, or plugged it in too many times. Who knows.
Click to expand...
Click to collapse
And how did you figured it out? Did you return the device to the shop?
I have this exact same issue except I am on AthineOS... I thought it was my PC until I read these posts. No OS updates or any other machine updates were performed except on my device. Any clues as to a fix?
Somehow I don't think this is just hardware.
I did drop my device once, but that was even before first flash. After that it still worked.
So, some weeks later I HSPLed without any problem. After that the device still worked.
Then, after investigating which ROM to use I flashed the ROM a few days later.
Right after the first flash it all still worked. So, had to flash another and from that moment on the device cannot be reckognised by any PC.
I still think it has something to do with the flashing. I think the device does not give correct feedback when it receives some commands from PC (eg. the command to reply the device type/number)
Does anyone know a program which can check the USB port for the HTC Touch Pro 2? Just to test wheather the connector pins are ok?
download activesync 4.5 and run the setup. it will perform a repair. that usually solves the problem. if not, try a different usb cable and try plugging into different ports on your pc.
crazythunder said:
download activesync 4.5 and run the setup. it will perform a repair. that usually solves the problem. if not, try a different usb cable and try plugging into different ports on your pc.
Click to expand...
Click to collapse
These are the first things done. And this was already written in here.
It happens with many PCs, including some on which the device never connected to.
Also tried different cables, ports, etc.
Also disabled the fast transfer etc. etc.
Even tried several other ROMs, inclusding original Dutch 6.1 and Dutch 6.5
I'm having the same issue. I can connect via bluetooth, but not usb. And I'm stuck with 6.1. I was tole my phone was brand new, but now I'm starting to think otherwise.
waynehead05 said:
I'm having the same issue. I can connect via bluetooth, but not usb. And I'm stuck with 6.1. I was tole my phone was brand new, but now I'm starting to think otherwise.
Click to expand...
Click to collapse
Some questions, to verify this is due to flashing or is a fault in the design of the device...
- Where did you get the device?
- Have you flashed the device?
- Did you accidentally drop the device?
hi just to say had a completely orignal o2 xda orbit 1 flashed with new rom everything worked perfect before now active sync plays up i can sometimes connect but get usb device not reconigsed then click cross then pull out usb then reinsert then active sync connects works fully functional then after 5 min it disconects this is driving me mad as use active sync for a fast internet connection on my pda as my wifi is crap
Hey there.
Ok I have a problem. I have had my touch pro 2 for about 6 months now and i am really happy with it, but recently i have ran into a problem.
My phone won't connect to my computer anymore! Not just my computer... no computer at all. Not just activesync, no, it doesn't recognise it at all, not even as a disk drive.
I doubt its the cable because it does charge, and i have tried another cable (not a htc cable but its a cable with the same plug, its from my external harddrive) and it still didn't work.
I also tried a hard-reset on my phone, but still... nothing.
Ive read somewhere that you should push the usb connector a bit up, i did that, but nothing (now the usb connector seems wiggly... glad it still charges though) i have no idea what it could be and i thought i'd post here first before going back to the dealer with it. Because without usb connection i can't install costum roms and that we wouldn't want that, do we?
Well, hope one of you guys can help!
That's very strange I have had it once, but that was due to the rom I used. I flashed another rom and it worked again.
What you could try is to download a new rom and put it on your sd car using this:
http://www.julien-manici.com/windows_mobile_wifi_remote_access/
This let's you put stuff on your mobile using wifi. It's worth a try.
But you have to install roms directly from your pc to your phone, while being connected to USB right? The standards htc roms for example can only be installed that way i think... or can you also copy the .exe to your device and run that?
i'll give it a go when i get home. Thanks =]
I am having the same issue here. All of a sudden my PC or Laptop doesn't see the phone at all but it does charge with no issues. When I plug it in I don't even get the sound that the PC knows something was jut plugged into it.
go to settings - connection - usb to pc - untick the enable faster synchronization box
that should do it
As long as you have Hard SPLed your Rhodium you should be able to use the sd card method to install a rom instead of using the PC and usb connection.
You copy the rhodium.nbh file to the root directory of an sd card formatted FAT32 and then boot into bootloader - volume down and power button when off.
Follow the onscreen prompts...
Cheers...
This sounds familiar - http://forum.xda-developers.com/showthread.php?t=741406
Lennyz1988 said:
That's very strange I have had it once, but that was due to the rom I used. I flashed another rom and it worked again.
Click to expand...
Click to collapse
What's interesting with my Tilt2 (not the OP) was that I wanted to flash my ROM with the new AT&T "unofficial" ROM and that's when I found out I couldn't tether. I basically just wanted to tether my phone so I could put that new ROM onto the phone to see if I could make it more reliable and faster. Sigh.
it actually might be the cord...
The same exact thing happened to me... my phone charged with the cord but no computer recognized it...
I bought a new usb cable from radio shack and viola it worked again... so I advise u just trying a new one and if it doesn't work take it back... but try the unchecking the "check for faster sync" box first like someone said bc that do stop it from being recognized sometimes...
mr_sheen said:
go to settings - connection - usb to pc - untick the enable faster synchronization box
Click to expand...
Click to collapse
Yes, this has (almost) always fixed the issue for me. Somehow WDC becomes blind to new device inserts after you plug-unplug them several times.
Slow but stable is better.
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
Your device manager shows anything when you connect it to your pc?Debugging mode is enabled?
Device Manager shows nothing. Debugging Mode is enabled.
I went through a similar problem a while back - took ages to resolve it - in my case the problem was the usb cables I was using - I had tried a few - but its possible to get cables that only charge and dont communicate - eventually i got it fixed by using a new original cable.
Might not be this for you but it certainly helped me
No fix that I know of...
I had this problem...
I tried different computers, different SD cards, I could take the sd card out and put it in a usb holder and that would work fine, so it really wasn't the sd card. I tried different usb cables too.... nothing would work.
I spoke to my carrier (Orange) to see if they could sort out the problem, and they went through their 'script' of diagnostics and came to the conclusion that it was my computer drivers and there was nothing wrong with the phone!!!
I then rang HTC and after several phones calls later, they said that they would repair it, unfortunately that would have left me without a phone for 2 weeks, so I rang Orange again to demand that they replaced the phone! I told them that HTC had said it was a fault and they sent out a replacement Luckily I had not rooted it at this point, so it was easy for me to swap it.
The replacement phone came the next day, and like magic, worked fine when I connected it to my computer (the same one that apparently had faulty drivers!!)
So, I never found a fix for this, but managed to get a replacement! hopefully you will be able to sort something out...
Good luck
I had this problem once and it turned out to be kernel related, but I'm not sure if this would apply in your case since you've flashed a few ROMs and still have the issue. Still, might be worth trying one of Apache's Buzz kernels or LeeDrOiD's latest... if only to rule out another possibility.
does your PC recognize it if you mount the SD in recovery?
if not, it should be the cable
I had the same thing, I went crazy, and somebody told me to use another cable
and worked
Same happened to me.
Seems the phone crashed the USB controller or something on the PC.
A reboot of the PC fixed it for me (I dont see you mention that anywhere).
First of all, thanks a lot for all your replies!
As I said before, I tried 2 different cables, that both worked fine before. But after your replies I tried a third, new one - same result.
The card is recognized fine by windows when I put it in a USB-Card Adapter.
What I forgot to mention in my initial post, is, that I also formatted the card in my pc, put it back in the phone and started the phone new - same result.
I will try some other kernels now. B.t.w., has anyone a solution for flashing the radio without pc? Via terminal, or recovery? As this is one of the few things, that I couldn't try yet.
I'm 99% sure radio wont be a factor in this mate as they only deal with mobile connections, eg GSM/3G, Bluetooth, WiFi and GPS. If the problem is software and not hardware then I think it will be with the Android USB gadget driver, which is in the kernel. Someone please correct me if I am wrong.
Can you mount as usb in CWM?
No, that doesn't work either.
Sent from my Desire HD using XDA Premium App
1) Try reinstall HTC driver on your windows and try again.
2) If it failed, backup all your files on sd card via USB-Card Adapter. Then use SD Formatter 3.0 (google it) to format the sd card. Copy the backup files back to SD card and try mount the usb again.
HELP i got the same problem
I use the phone in the last 6 months; I have S-OFF, clockworks custom recovery and rooted stock HTC 2.2 Froyo. The only change I made last week is purchasing a desktop cradle "stand". I tested the stand several times the last week and I was able to access the SD card & the HTC sync modes successfully.
Now when I connect the phone using stand or any other USB cable including the original HTC; nothing happened on the computer! The USB manager activates and brings up the USB connection type menu. However, nothing recognized by PC.
I tried all things that you can expect (another PC, another cable, factory reset, new room, with/without cradle) nothing happened, even I connected the phone on a new PC it didn’t detect the new driver!
What to do now??
Hi,
Not sure if you have already, but you can try the new HTC sync version 3.0.5557 - It's actually for the HTC flyer tablet, but i installed it and it works perfectly for the DHD.
You might have a driver issue, but the new 3.0 sync comes with new windows drivers so maybe it's worth a shot.
I've checked the HTC Flyer support page but there's no link there for the 3.0 Synch ... I could only find a direct link, here below
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1097&news_id=923
Be sure to un-install the previous HTC sync first
Its not a driver issue, I tried the new sync. Not working. Nothing is working with USB only the charger.
I have a feeling that electrostatic damaged my USB. I remembered last week I touch the phone while charging and a one electrostatic click was strong.
help!!
Bladeinger said:
Hello, XDA-Experts!
I encounter a problem with my desire HD and looking for any help I can get.
Since about one week my Phone is not recognized when connected to a PC.
I am using the phone since December 2010 and it works well since then. It's S-Off and Radio S-Off. In the moment, I am using CoreDroid 4.9 with Radio 26.06.04.06_M. Before I was using the ARHD ROM for some time.
The problem occurs on 3 different PC's with 3 different operating systems (Server 2003, Win 7 Ultimate 64-Bit, Win XP Pro SP3, all of them used to recognize the phone before). Windows never recognizes the phone now, android (in most cases) recognizes the connection an asks for the connection mode. The phone is ALWAYS charging over USB.
What I tried so far, after searching in different forums and via Google:
- Rebooting the phone
- Removing the phone's battery
- Booted in fastboot - no USB connection
- Tried a different USB cable
- Changed the USB ports at pc (without hub, no other USB-devices connected)
- Flashing other ROM (tried CM and MIUI, with full wipe/factory reset)
- Checked the USB-connector in the phone with an electronic microscope - all contacts look fine
I am running out of ideas, the only thing I couldn't try, is another radio, because I don't know how to flash without pc. But I don't think, the problem is related to the radio...
Any help is greatly appreciated.
Click to expand...
Click to collapse
hey I have same problem... :-/
what's the solution ?? plz tell me
same problem
please help
EDIT:
Most part of that problem solved, I bought new USB socket with ribbon, and replaced it. It worked. it seems there was a cold solder near the socket. USB works now with other devices like Flash drive, mouse, etc..
Still there's a little problem - while connected to a PC, neither phone nor PC show any signs of connection.
Anyone met the same problem? I checked on to computers Win8.1 and Win7 - no response.
I tried to install some additional drivers but with no luck...
------------------------------------------------------------------------------------------------------------------
< Old >
I've got Huawei P6 and used it with a few ROMs, after flashing one I noticed android doesn't detect USB connection anymore.
It sees it as regular charger - no popup on notofication bar, no way to exchange data with PC.
Changing ROM doesn't solve the problem. I tried stock ones with no effect (installed from zip file in TWRP).
I searched over the web and found no similar case. I think rolling back to full stock could possibly help, but I'm not sure how to do it - will creating dload folder with install data be enough? does it contain all the kernels, recovery and so on - to have the software version exacly as from factory?
USB OTG doesn't seen to work now either, It all worked before. Is there a way to force-detect the connection?
Please, don't write me to check the cable or drivers or to clean the USB plug. Each double... tripple checked. Tried different cables, computers. I've no problem connecting other phones.
I'll be very greatful for help in solving this issue. Even copying a photo to a pc is a problem now...
thanks in advance