Related
Hi Guys,
I just bought a HTC Aria and am now looking for a case and screen protector. I did go through this entire forum and read to all the posts in regard to the these items. However, I do have some specific questions in regard to these products that I hope someone can answer.
For screen protectors, I was looking at the following:
youtube.com/watch?v=O5FDzVFa-Vk
This protector looks fairly thick, do you think it would affect the screen sensitivity too much? Anyone have an experience with this particular product?
The two cases that I am looking at are:
amazon.com/gp/product/B003TFDIZC/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DER
amazon.com/gp/product/B003SNIMZQ/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DER
Which of these would be more protective for accidental falls? Personally, I like the design for the first one, but if it does not protect the phone very well then it serves me no purpose.
One of them is an argyle skin case the other is a jelly skin case. What is the difference between the two. I upgraded from a 10 year old prepaid phone. So, do not really have any experience with any type of case/protector.
Thank you.
I have one of each.
The most vulnerable thing to break on this phone is if it falls and lands on a corner or on the front glass in any way, it will shatter the digitizer. I know this from experience.
Both of these cases will protect the glass from an impact either on the edge/corner or for a face drop. They both have a ridge above the edge of the top of the phone so the glass edge is not exposed directly in the event of a drop face first. But the jelly case, while it is sticky and bulky and impedes putting the phone in and out of your pocket, definitely appears to be more shock absorbing than the TPU type cases and I would tend to think it will work better if you drop it.
That being said, I generally don't use any case or cover for my phone. My wife had a nice case on her Evo and one drop shattered it. My friend had a beefy rubber case on his iPhone 3Gs and one drop shattered it. Someone ran over my wife's iPhone in a rubber case with their Yukon XL and it left tire treads on the screen protector and otherwise the phone came out in mint condition. So you know, I think it just all depends on precisely how it is dropped and the case makes minimal difference.
Has anyone tried the following? I am concerned that it may block the proximity center.
Both links are for the same product; however, they show different images/angles.
amazon.com/Skinomi-TechSkin-Protector-LIFETIME-REPLACEMENTS/dp/B003F31HM4
skinomi.com/htc-aria-carbon-fiber-skin-protector.html
the skinomi thing doesn't have anything I can see that would prevent the screen from shattering if it's dropped.
If you want to protect the phone from the most common and expensive damage, then you need two things:
1. a raised ridge around the edge of the glass so that if the phone is dropped directly on its face, it won't impact the glass, but rather will land on this ridge
2. some kind of shock absorption on the corners of the phone so that the impact of a corner drop is not transmit to the corner of the screen glass
The skinomi "protector" has neither of these features, and IMHO it's simply cosmetic. It does look nice.
When i bought my HTC One Stealth Black, i made sure that i got a perfect model (no defects). I took about an hour in the shop examining all the black HTC One's (they agreed to open 3 boxes for me) before i finally made up my mind. I paid for my phone off-contract and went home perfectly happy with a 801e model (it also has a sticker on the side of the phone that says UKR and on the box as well, so i guess it's from Ukraine and i got a 3-pin power adapter in the box together with the standard 2-pin charger plug) and also got a free TPU case with screen protector, as gift from the shop. Well, i put my phone in the TPU case as soon as i got home for fear of any drops/bumps/scratches, put it in my jeans pocket and went through the rest of my day moving around. Later that afternoon, i pulled the phone out of its case to touch the cold aluminium back and to my horror, i found a scratch (there were no scratches whatsoever before) that matched the contour of the TPU case around the camera. The scratch is around the flash.
Conclusion: The cheap unbranded TPU case seemed to fit the phone snugly but apparently not, as the constant movement and rubbing of the phone within the TPU case from inside my jeans pocket had caused the sharp edge of the TPU case to slowly erode the paint coating. It's a good thing that i noticed it after only one day usage or the etching would have definitely gone deeper, possibly even exposing the aluminium colour after a couple of days. It says "nothing but the best" on the packaging of the unbranded case, which is ironic.
So, my advice (and the reason for my endless rant in this post): stay away from cheap TPU cases, even if it says TPU, which might be true about the material itself but the fact of the matter - without a tight fit of the phone inside the casing, the resulting inside friction between the phone and its casing will damage your phone, causing the paint to wear off. This is probably not applicable to those of you who chose/use the Glacial Silver HTC One, since any scratch will probably not show up. But with time, the constant friction might cause the scratch to become visible. I've attached pictures so you can understand why i'm *****ing about my One By the way, i apologize for my dirty camera lens.
Lesson learnt - i've already ordered 3 casings (the best i could find after hours of searching, for cases that offer a balance between compactness v/s protection); Cimo Grip Back Case Flexible TPU Black, Otterbox Commuter Black and UAG Aero. I wouldn't bother with any other cases, unless you want even more protection, then you should be satisfied with the Otterbox Defender case.
My friend .. ANY case you put on the phone has the potential to scratch the aluminum on the edges. It is simple physics: if you get some dust/sand in between the case and the aluminum (where in other locations can the dust/sand/lint settle ?) any slight pressure or movement of the case will cause a small surface defect. You can not hide from that and you can not prevent that.
Live with it ! It is called reality.
electronical said:
When i bought my HTC One Stealth Black, i made sure that i got a perfect model (no defects). I took about an hour in the shop examining all the black HTC One's (they agreed to open 3 boxes for me) before i finally made up my mind. I paid for my phone off-contract and went home perfectly happy with a 801e model (it also has a sticker on the side of the phone that says UKR and on the box as well, so i guess it's from Ukraine and i got a 3-pin power adapter in the box together with the standard 2-pin charger plug) and also got a free TPU case with screen protector, as gift from the shop. Well, i put my phone in the TPU case as soon as i got home for fear of any drops/bumps/scratches, put it in my jeans pocket and went through the rest of my day moving around. Later that afternoon, i pulled the phone out of its case to touch the cold aluminium back and to my horror, i found a scratch (there were no scratches whatsoever before) that matched the contour of the TPU case around the camera. The scratch is around the flash.
Conclusion: The cheap unbranded TPU case seemed to fit the phone snugly but apparently not, as the constant movement and rubbing of the phone within the TPU case from inside my jeans pocket had caused the sharp edge of the TPU case to slowly erode the paint coating. It's a good thing that i noticed it after only one day usage or the etching would have definitely gone deeper, possibly even exposing the aluminium colour after a couple of days. It says "nothing but the best" on the packaging of the unbranded case, which is ironic.
So, my advice (and the reason for my endless rant in this post): stay away from cheap TPU cases, even if it says TPU, which might be true about the material itself but the fact of the matter - without a tight fit of the phone inside the casing, the resulting inside friction between the phone and its casing will damage your phone, causing the paint to wear off. This is probably not applicable to those of you who chose/use the Glacial Silver HTC One, since any scratch will probably not show up. But with time, the constant friction might cause the scratch to become visible. I've attached pictures so you can understand why i'm *****ing about my One By the way, i apologize for my dirty camera lens.
Lesson learnt - i've already ordered 3 casings (the best i could find after hours of searching, for cases that offer a balance between compactness v/s protection); Cimo Grip Back Case Flexible TPU Black, Otterbox Commuter Black and UAG Aero. I wouldn't bother with any other cases, unless you want even more protection, then you should be satisfied with the Otterbox Defender case.
Click to expand...
Click to collapse
I had the black for a while. I think that it is prone to anything. Apart from light scratches sustained by using the double dip case, the camera cut out of an incipio case left a watermark on it as well. Now using a silver one and not a single scratch. Rotating between three cases.
Forgive me if I'm wrong, but isn't anodized AL WAY harder than TPU?
If it is, then isn't it PHYSICALLY IMPOSSIBLE for the case itself to scratch the phone?
Either a) there was dust/dirt in the case or
b) it's not a scratch, try wiping it with mild soap, water and a soft cloth.
Interesting thread...you were writing this 3 years ago, I just picked up two pristine condition used m7s, both with nearly all day batteries. Yesterday I got two cases of the first type described below.
I just love these phones so much. They are such a huge upgrade from any phone I have had since I had a droid 2 from motorola before knowing anything at all about these nifty little computers.
I just came in here to say that I will be getting the hard glass protection from now on for every phone I get. Would also recommend to anyone as it is far superior to foils.
Also three good types of cases:
- the hardened shell with no button coverage, and brushed metal exterior
- the clear plastic back, black bumpered semi hard with plugs and accurately designed button enhancers (distinguished by black surface lines on the back coming in from upper and lower edges about a cm each, towards the antennas)
-and believe it or not I really liked the ordinary rubber sort of cases with wavy line down the back and dual texture... as long as they have button covers. But those wouldnt be good for people who have a hard time with the buttons already.
Just picking up these phones starting in June 2016...has made my android experience so much more enjoyable...now being able to play top 3d heavy performance requiring games...and so much different development for the phones.
here's a couple pics of my phone cases I was describing. no scratches whatsoever on the two used like new phones, although its a used case on goldy. the other phones are for family and such, but also loving the cases on them. red looks good in red but it obscures the back... so take clear
kruc Ire said:
here's a couple pics of my phone cases I was describing. no scratches whatsoever on the two used like new phones, although its a used case on goldy. the other phones are for family and such, but also loving the cases on them. red looks good in red but it obscures the back... so take clear
Click to expand...
Click to collapse
Link please?
Saf98 said:
Link please?
Click to expand...
Click to collapse
www.urbandictionary.com/define.php?term=spinner
I tend to be rough on my mobile devices, generally.
My old LG Optimus V is incredibly tough. It's survived everything I've dealt it from four foot drops to cement (battery flies out) to face-down falls from lap in car on gravel (scratched screen protector) to dunked in my cup of coffee (took apart, dried out, cleaned contacts, it now randomly loses touch with the vfat partition.)
I read the cases thread and Googled for a while but couldn't find a waterproof or otherwise supertough case to fit this toy.
Does anyone care to relate experiences, plus or minus, about drops, dunks, skids, kids, crushing, etc? I'd enjoy hearing about incidents and results.
phone cases
bigsupersquid said:
I tend to be rough on my mobile devices, generally.
My old LG Optimus V is incredibly tough. It's survived everything I've dealt it from four foot drops to cement (battery flies out) to face-down falls from lap in car on gravel (scratched screen protector) to dunked in my cup of coffee (took apart, dried out, cleaned contacts, it now randomly loses touch with the vfat partition.)
I read the cases thread and Googled for a while but couldn't find a waterproof or otherwise supertough case to fit this toy.
Does anyone care to relate experiences, plus or minus, about drops, dunks, skids, kids, crushing, etc? I'd enjoy hearing about incidents and results.
Click to expand...
Click to collapse
Yeah , not a lot of cases for this phone so I went with a generic Amazon site hard rubber minimal case, no top or bottom cover but sides lipped up to give the screen some chance in a drop but what I did do is spend more then what I spent on the case and got that German companies glass screen protector. Can't think of the name off the top of my head so I'll just call it"expensive" for now since it cost twice what my case did.
As for drops I drop it all the time and it's fine but not on concrete yet so not a good judge there. I think it would do ok with this case but if it landed screen down I'm pretty sure the screen protector would catch some gravel with that thin lip and crack but that's why I got it. I just got tired of big bulky cases that I used to get on my older phones, 2 and 3 pieces, and finally just said "to hell with it" and went minimal mostly due to this bigger screen but I understand wanting the extra protection.
Thanks, good info. Like to hear it can bounce.
First thing I bought with this device was a tempered glass screen protector.
I found mention in the cases thread that the iphone6+ is a close fit dimensionally, found a $5 hard rubber Duracell case for the iphone6+ (only issue, misplaced power button) that I'm using until I can find (or hopefully print, soon) a waterproof case that actually fits.
Hi
I bought a oneplus one about 3 months ago and I absolutely love it however I dropped it a while ago and everything is fine but the frame area to the left of the charging port is completely jacked up :/ chunks of it are missing too...
I'm currently using the oneplus flip cover however it doesn't cover it up, so my question is: is there any light tpu/hard shell case that covers up the entire silver bezel, or at least the bottom of the phone so I don't have to look at this anymore xD. All cases I've seen so far leave a bit of the bottom frame exposed just enough so you can see the damage :'(
Anyone know any case that can cover it up?
Thanks!
I advise you to look for the "Diztronic" TPU case, covers completely the silver frame, following the contour of the screen. There's just a 1 cm spot where the frame is visible, at the bottom of the cover, near the hole for the USB cable, but in normal use is not visible. It's 6 months that I'm using this cover in combination with a tempered glass and I'm really satisfied.
Guess it all depends on what kind of protection you want. If you just want mild protection and to just cover the sides, then go with the tpu case. If you want heavy protection, I would suggest the Tudia Omnix Hybrid, http://www.amazon.com/TUDIA-Full-body-Protective-Protector-Resistant/dp/B00SO4XYHA . I have the Tudia case and it has taken a beating and protected the phone very well, even from some pretty high falls. Only con about the Tudia case, is that the front covers the sides of the screen a bit and prevents touch at the the very edges of screen. This can be a bit bothersome if using apps in full screen/landscape when you have to swipe down to exit full screen.
noahvt said:
Hi
Anyone know any case that can cover it up?
Thanks!
Click to expand...
Click to collapse
kenboyles72 said:
I would suggest the Tudia Omnix Hybrid
Click to expand...
Click to collapse
I too have a Tudia--Slim-fit Cygen.
thanks
thanks
Bino92 said:
I advise you to look for the "Diztronic" TPU case, covers completely the silver frame, following the contour of the screen. There's just a 1 cm spot where the frame is visible, at the bottom of the cover, near the hole for the USB cable, but in normal use is not visible. It's 6 months that I'm using this cover in combination with a tempered glass and I'm really satisfied.
Click to expand...
Click to collapse
I totally agree, couldn't have said it better. Here are some visuals for you. I got the Diztronic case when I bought the phone, it has protected it from falling out a car, off the desk, and off a moderately high shelf. You can get a tempered glass screen protector off eBay, have to search a bit (TechArmor don't have one). I got one from user dreamlight2004 for around 5 dollars. I made the mistake of getting the OPO screen protector when i first got my phone and it went bad a month ago, a hard scratch from a key. Tempered glass protector looks so much better. Just loaded COS13, it should keep me busy until the OP3 gets announced - so far it's looking to be a really good phone (boo on the OP2 and OPX)
Case view
Phone view
I agree, Diztronic bumpers are terrific.
I'm using this one http://www.ebay.com/itm/Rearth-Case-OnePlus-One-Folie-Ringke-Fusion-Schutzhulle-Cover-Tasche-klar-/121715293296?hash=item1c56cbfc70:g:gAUAAOSwT6pVt5tV And it is awesome. You can also print your designs for this case!
Ringke Fusion for me is great. It covers the OPO completly.
DO NOT BUY THE TUDIA CASE.
I bought it because I thought it looked pretty sweet. It's the worst case I have ever owned, and I have owned a few. Half the case is slippery nonsense plastic. You grab your phone "wrong" (by this I do not mean insecurely, but simply you happen to not have your fingers on enough of the case's rubber outline), it's like holding an eel.
The clips covering the audio jack and usb port are an absolute NIGHTMARE to open, and plugging in your charger for the night would realistically take three hands with 17 fingers each to manage in a reasonable timeframe. Good thing my audio jack's clip, after having been used exactly twice without even the slightest bit of the abuse it deserved, now no longer clips into it's crevice, and is permanently hanging out at a 30 degree angle. The pop-out clip on the back is nail ruining torture to get out, as is the rubber outline holding the front of the case, should you want to get this garbage off to see how far you can launch it through the air in rage.
I wouldn't use this piece of junk if they paid me.
I am using the TUDIA Dual-Layer case+a glass screen protector, which turned my One to a tank
I drop it way too often, but it still works flawlessly, so I can recommend this case. It also coverers the aluminum frame
I can rep the Poetic Case found here:
I took out the screen protector but I have been rocking the case for more than a year. It is kinda bulky but I have no worries about dropping it or tossing my phone on my desk. Also, It is kinda water resistant (with the screen protector). I have dropped like a glass of water on it and quickly cleaned it up with no harm
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”)Shock Resistant
Compliant with a military standards test (MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”). Device may not perform as tested in all conditions. Test performed in controlled environment. Do not attempt.
Click to expand...
Click to collapse
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
From dbrand
Robot 077 (dbrand)
Apr 13, 15:55 EDT
Hey ######!
Thanks for reaching out. Unfortunately, we have no plans to support the LG G8 ThinQ, as there is simply not enough demand to justify adding it to our portfolio at this time. Sorry about that. Let us know if there is anything else we can help with, and have a great day!
Signed,
A Robot
Click to expand...
Click to collapse
screen protector
https://www.youtube.com/watch?v=9EDYQG6Q7JY
i found this to be a good review of the BodyGuardz Pure Arc Curved Tempered Glass Screen Protector for the G8 ThinQ
i thought it was a shill channel looking at other reviews, but he seems to hate this. it fits GREAT, but only has adhesives on the sides and has a visible dot matrix.
on top of that, he says there is an unnatural hollow feel to it due to the adhesive not being full screen. i imagine this will negatively affect the oled speaker.
this is a $50 screen protector that AT&T is giving away as a part of a promotion.
skins... not much out there and only dbrand has responded (with a NEVER).
the Invisible Phone Guard screen protector was OK and visibility was good, but i found the sound to be very slightly muffled as if it is dampening a certain high frequency.
i'm keeping the back on until i find a decent skin.
this film seems like it will blemish easily. it certainly gets dirty easily. pics here...
Having this phone for a few days now and the OP was not lying about how slippery this phone is. A case or skin is a definite must have!
Ordered a Ringke Fusion X.
Sent from my LM-G820 using Tapatalk
I ordered this case - https://www.ebay.com/itm/273759783563 - I should be getting it later today, I'll post about how well it works.
No sooner did I post this than it came in the mail. Fits on easy, stays on snugly. It's matte rubber without feeling like you're holding a car tire. I had one for my Nexus 6P I really liked and this feels equally good.
This thing is indeed incredibly slippery. I think I'm just going to be extra careful about where I put it down (it's not too slippery in my hands I find, just on certain surfaces), I hate hiding the slick design of the phone with a case. This is also the first phone I've had in a very long time where the camera doesn't bulge out the back, which I really appreciate and don't want to diminish with a case.
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
Well there are a number of skins now at the varies skin sites though I personally skipped them and simply put the phone into an Otterbox Defender case.
I used a cheap curved glass screen protector ( was like $9) and some loca glue (like $10) to make a DIY full adhesive whitestone kit.
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
stamos*bp said:
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
Click to expand...
Click to collapse
I have not had that issue and I am using a Supershieldz screen protector however my brother who is using an Iphone 7 recently had that issue with one due to a screen protector he picked up at Walmart though it resolved once he removed it.
It's amazing to watch this phone slowly creep off of my wireless charger, which has a rubbery grippy surface! My case arrives today...
I'm using slickwraps for the back of my phone and I like it. I would say they are slightly less precise than dbrand, but still great quality. If people would like photos, please let me know.
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Huge Thanks!
Weston
You may want to think about giving the Skinomi Full Body Skin a try. It definitely keeps my phone from slipping off of surfaces, giving the phone a bit of a plastic-rubber feel while still letting the beauty of the phone show through. The back protector doesn't interfere with any cases and offers a bit of mental relief for those times you want to carry your phone without a case.
Dude, I had my g8 for 2 days. Was in. The washroom and the phone was on a roll of toilet paper (the flat side, obviously haha) and got a notification. Before I knew it the phone slid off and landed on the bottom right corner, heard an alarming "tink" sound but didn't think anything of it. A few mins later I saw a small crack, then I looked again and realized that there were multiple cracks on the screen. Ended up getting it replaced by my carrier, I said it was damaged in shipping. Point is that this phone is a glass cannon: it's very powerful for specs but it will have a broken screen if you sneeze on it the wrong way. This is one of the massive downsides to the new gorilla glass. Sure it's scratch resistant but with the wrong amount of pressure it will get destroyed :/
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
I've dropped this thing so many times because it's so slippery. Seems like every other week I hear it jump off a table a few minutes after I leave the room.
I have a crack on 3 corners, but nothing across the screen. My case (which I tend to take off when connecting it to things such as controllers or some USB cables) almost hides the cracks.
However, these are more like small missing chunks of glass on the corners. I've never had such a fragile phone. I tried super glue on the corners to keep it from spreading, but eventually just went to town on the corners with silicone conformal coating that I had sitting around. It seems to be working great and keeps the little shards coated and sort of glued in there. I kind of prefer this to replacing the screen as replacements have only gone down slightly to around $150 shipped from China and I know I'll just end up breaking that one.
There's always been one or two deal breakers with all of my LG phones and that's why I kept going to a different manufacturer as soon as I could. I hate to say it but after this, I'm never going back to LG again no matter what cool unique feature they're wooing me with.
I basically used this phone with a broken screen for 5 months. Replacements are still $150 (better than $200 back when it broke). It dropped approximately 1.5ft face down onto a clay tile floor and front screen has cracks all over. It almost looks somewhat inverted now as if the screen was designed to have tension. Well I went and got a note 10+ and man it is great to have a real phone again. Doesn't have some of the edgy LG stuff that I really loved and theres no headphone jack... but bigger/brighter screen that isn't broken is so nice to have. Good luck with your screens guys.... I'll replace mine when the price is reasonable and either go back to using it or put it on ebay.
Jaa-Yoo said:
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Click to expand...
Click to collapse
I have reached the same conclusion about the screen not being flat enough to utilize a hard glass protector even if you avoid the very curved edge portions. I tried the curved, glued only on the edge types first but that always had a weird optical effect and wasn't very ruggedly glued on, none in the middle. Why? I haven't tried using whitestone glue yet.
So the suggested one sounds interesting. https://www.amazon.com/Ringke-Compa...dge-Application/dp/B07NHMBNLH#customerReviews
I think I'll watch the videos first.
I also found these but yes a firm, solid piece of glass is a no go IMHO. Not a fan of these new case designs for all the new phones. Why de do dat?
https://www.amazon.com/dp/B07QQD2BCG/ref=cm_sw_r_cp_apa_i_MkrHDb48GTKZN
https://www.amazon.com/gp/product/B07QB9MN28/
Still hoping for a solution. I had great luck with Spigen Crystal screen protector SGP10855 for my LG G3 which is hard but I believe would be flexible enough if it skipped the curved edges but they don't make anything like that?
UPDATE: After watching the LG G8 video on YouTube I decided to go with the Rinke.
I'll report back. This will be 4th type attempted.
I put it on this morning. It is pretty easy to get this on with good alignment and no bubbles.
Two things.
1. If you watch the YouTube instructions the place where the dust dust cleaning sticky backing splits in half does leave a slightly perceptable crease in the soft protector. Maybe it will smooth out with time? It did not with the squeegee.
2. It's soft so you can possibly nick with your fingernails and it's also easy to lift an edge ever so slightly during final finishing so be careful.
I see no installation flaws but it also isn't a hard glass but then those do not install properly even when undersized because the screen is not level as you get near the edges as far as 1/4" away. The film eliminates this issue but will it protect and stay on.
We shall see.
I sell a lot of these devices and it is even hard to photograph them on a smooth surface because they will start around on my table. Put it in a case, the screens are expensive.