Hi Guys,
I just bought a HTC Aria and am now looking for a case and screen protector. I did go through this entire forum and read to all the posts in regard to the these items. However, I do have some specific questions in regard to these products that I hope someone can answer.
For screen protectors, I was looking at the following:
youtube.com/watch?v=O5FDzVFa-Vk
This protector looks fairly thick, do you think it would affect the screen sensitivity too much? Anyone have an experience with this particular product?
The two cases that I am looking at are:
amazon.com/gp/product/B003TFDIZC/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DER
amazon.com/gp/product/B003SNIMZQ/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DER
Which of these would be more protective for accidental falls? Personally, I like the design for the first one, but if it does not protect the phone very well then it serves me no purpose.
One of them is an argyle skin case the other is a jelly skin case. What is the difference between the two. I upgraded from a 10 year old prepaid phone. So, do not really have any experience with any type of case/protector.
Thank you.
I have one of each.
The most vulnerable thing to break on this phone is if it falls and lands on a corner or on the front glass in any way, it will shatter the digitizer. I know this from experience.
Both of these cases will protect the glass from an impact either on the edge/corner or for a face drop. They both have a ridge above the edge of the top of the phone so the glass edge is not exposed directly in the event of a drop face first. But the jelly case, while it is sticky and bulky and impedes putting the phone in and out of your pocket, definitely appears to be more shock absorbing than the TPU type cases and I would tend to think it will work better if you drop it.
That being said, I generally don't use any case or cover for my phone. My wife had a nice case on her Evo and one drop shattered it. My friend had a beefy rubber case on his iPhone 3Gs and one drop shattered it. Someone ran over my wife's iPhone in a rubber case with their Yukon XL and it left tire treads on the screen protector and otherwise the phone came out in mint condition. So you know, I think it just all depends on precisely how it is dropped and the case makes minimal difference.
Has anyone tried the following? I am concerned that it may block the proximity center.
Both links are for the same product; however, they show different images/angles.
amazon.com/Skinomi-TechSkin-Protector-LIFETIME-REPLACEMENTS/dp/B003F31HM4
skinomi.com/htc-aria-carbon-fiber-skin-protector.html
the skinomi thing doesn't have anything I can see that would prevent the screen from shattering if it's dropped.
If you want to protect the phone from the most common and expensive damage, then you need two things:
1. a raised ridge around the edge of the glass so that if the phone is dropped directly on its face, it won't impact the glass, but rather will land on this ridge
2. some kind of shock absorption on the corners of the phone so that the impact of a corner drop is not transmit to the corner of the screen glass
The skinomi "protector" has neither of these features, and IMHO it's simply cosmetic. It does look nice.
Related
Hi guys,
I know this is a silly question but I think its warranted
Coming from a range of IPhone devices I've always used silicon cover that rims around the glass so if it fell out of my pocket screen side down the glass would not crack. Most of my if not of my drops have been from the waist down so hopefully ill continue on that trend and maybe I can escape using a bulky cover.
Now I've just put a gel cover on my note and can't help but feel it adds a lot of volume to a pretty big phone already!!!!
Ideally I want the following but unsure if it will satisfy needs
*Thickish screen protector that will help avoid glass cracking.
*Skin around the boarder if the phone to avoid scratching ( when I do drop it just order replacement skins )
*Rear battery cover is replaceable so not too worried about that but maybe need a skin to cover the camera glass from scratches.
What do u think guys would this be possible and is there any screen protectors / skins out their you would recommend?
Thanks all
a good screen protector will hold your glass in place after its shattered, but wont stop it from shattering.
most screen protectors do not cover the whole screen, they leave the edges exposed. when you drop your phone, its 90% likely to land on a corner first, so you'd need to reinforce the corners to minimise vibrations and the resultant damage in the case of a drop.
the only cases i know of that do this well are the ballistic cases. i had a ballistic shell gel and ballistic hardcore case on my old motorola atrix, i accidentally dropped it from my roof when i was fixing my antenna. no cracks on the screen, no scratches on the device itself. not bad for an 8m drop. sadly ballistic havent released any cases for the note.
Dam thanks ur right the edge needs protection.
Sometimes I think a rubber band would be good enough!! If only someone made a thin silicon band that just edged around the screen and steel frame that would be good enough for me.
Sent from my GT-N7000 using xda premium
Souai said:
a good screen protector will hold your glass in place after its shattered, but wont stop it from shattering.
most screen protectors do not cover the whole screen, they leave the edges exposed. when you drop your phone, its 90% likely to land on a corner first, so you'd need to reinforce the corners to minimise vibrations and the resultant damage in the case of a drop.
the only cases i know of that do this well are the ballistic cases. i had a ballistic shell gel and ballistic hardcore case on my old motorola atrix, i accidentally dropped it from my roof when i was fixing my antenna. no cracks on the screen, no scratches on the device itself. not bad for an 8m drop. sadly ballistic havent released any cases for the note.
Click to expand...
Click to collapse
I've had ballistic on my last 3 phone and they where amazing. The rubber "balls" in the corners saved my phones numerous times. Never had 1mm of damage. I really hope they do come out with something for the Note. I would be more than fine with the extra bulk knowing it's that protected.
Having cracked the screen on my old HD2, I feel a bit paranoid now and want a case for my Note. I haven't ever used a case for any phone in the past as I'm in the mind frame that you pay good money for a phone which is well designed and feels great in the hand, so why go and cover it up? By the time the phone is so scratched and beaten up that it no longer looks pretty, it's time to change it anyway.
So, I don't understand why someone would put a plastic housing around the back of their phone, as surely that area doesn't need anywhere near as much protection as the glass? Happy to hear your views though.
At the same time, the plastic films which cover the screen wouldn't protect the screen from cracking in the eventuality of a fall, would they? So again, I can't see the reason for covering a lovely feeling screen with a film.
I use my phone in the car for navigation, so a flip case might not be practical, which I guess only leaves me with a sock/sleeve case of some sort?
Can anyone recommend something which will offer some level of protection to the glass screen (digitizer) in the event of a fall?
Have you looked at these:
http://forum.xda-developers.com/showthread.php?t=1531858
http://compare.ebay.co.uk/like/170819061955?var=lv<yp=AllFixedPriceItemTypes&var=sbar&cbt=y
http://www.ebay.co.uk/itm/SAMSUNG-G...otn=21&pmod=170819061955&ps=54#ht_2421wt_1397
I really like the original flipcase...
Sent from my GT-N7000 using XDA
My only concern with those tempered glass 'covers' is that they only protect the phone's digitizer from scratches. There is no evidence that dropping one's phone will only crack the tempered glass and leave the digitizer in one piece. Or is there?
Use a universal car mount and you can use a flip case.
Hey guys, I'm having trouble finding any brand left that sell tempered glass for this phone.
The only one I found is XGear, base on the image I am certain that the designed is by having the adhesive stickers on the bezel/edges only, while the viewable area isn't adhesive. I have used tempered glass of similar design before and it is terrible. Since the adhesive stickers are thin on the edges, its not very durable and can leave gaps or pop out (especially since this is a curved screen), and let water in. It will also cause "rainbow effects" due to the gap between the two glasses. There are Amazon reviews that reflected my concern.
I'm looking for something like this which have the entire surface being clear and able to stick.
Doesn't seem like there are any available, but I wouldn't mind using tempered glass for another phone model that could fit on the Nexus screen, I think that's the best way to go. But I won't receive my Nexus in a few days, then I can see if the screen protector of the Moto X fit inside the Galaxy Nexus screen.
Bought a Nillkin Tempered GLass for my Note 3. Guess what.....after a month, the screen cracked by itself! I'm very sure it was not caused by wrong handling nor impact. All this 9H hype by Nillkin is just bull! Choose another brand!
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
eksasol said:
Well I just decided to order a second i-Blason for the Moto X and put it on the Nexus. Kind of awkward, but it work. Couldn't fully stick because of the curved glass though, but the adhesive is durable enough so I'm not worried.
Click to expand...
Click to collapse
Was gonna buy the xgear thanks for the insight!
Galaxy Nexus
ROM: SlimKat 4.4.2
funny how purchases get based on "user" reviews. i read all 12, and the bad reviews remind of typical users that don't read directions, don't follow directions and then think if they pitch a fit with the manf and bad mouth the product they'll be redeemed of their stupidity.
dust under the screen or lifts at the curve?
1. poor cleaning prior to affixing
2. repeated removing and reapplying and failing 1.
it cracks? really? it's glass, treat it as such and pay attention to 1 & 2 above.
install tip: align and start from one end. it's not a bumper sticker, do not apply it as such.
dots and rainbow? if turned off and angled just right you can see it. turn it on and they're gone. the rainbow kind of reminded of how some windshields look while wearing polarized sunglasses.
i mostly lurk these forums but couldn't let this go. i've had my xgear tempered glass protector on for 2yrs without issue. i will buy more from them if available and my device doesn't have gorilla glass.
well worth the $30+ i spent at the time, has saved my phone too many times to count.
I'm also looking for a tempered glass that is different from Xgear...
I just installed an xGear Fantom (and just replaced my broken screen), I don't see any rainbow effect. I did notice that the protector at the sides sat flat against the screen, but were it curved it bowed out in the center. Looked clear, but definitely was not flush against the glass. I put a thick sock on the screen and some weight over top of it (a thick heavy hard cover book and a medium sized socket set), and that eliminated the bow and put a massive rainbow bubble into the middle of the screen. I lifted the top right corner of the protector slightly and the bubble moved straight out on it's on. It now sits 100% flat. I don't notice any loss of touch sensibility. As far as I can tell, this is going to work well, and last a loooong time.
Sent from my Galaxy Nexus using XDA Free mobile app
xGear Fantom is expensive to me and it has bad critics. I'm trying to find another alternative although it is to another model of mobile with the similar screen's sizes 135.5 x 67.94 mm and the holes fit well. The Moto X's screen seem too small.
I think only xGear makes a tempered glass protector for the G'nex. Might be able to use one for another model, but I don't think it would work any better and you would have a higher chance of running into poor fitment.
But I do understand what your saying - some G'nex have a sensitivity bug that the xGear exaggerates (I'm lucky I don't), while some people have had problems with the glue giving out as well as sensitivity issues not related to the bug.
I'd think you could run into those issues with any brand of glass screen protectors, and further might run into other issues with fitment if the protector is for a different phone.
I can't say if I'll have adhesion issues (and so far nope - but only been barely a week or so since installing it), though I think I would have both if I had not noticed and taken care to eliminate the slight bulge out where the glass curved.
Mine did lay flat at the sides along the protectors boarder, and while it was clear for viewing the screen (as in it didn't look like I had air trapped under the protector), it was clearly bulged out (due to an air pocket) a few mm in the center of the screen where it naturally curves when viewed from the side - I was able to correct that with the weight and slight lifting of a corner.
Sadly, you may want to run your naked (no protector) or with a PET film protector.
Sent from my LG-D852 using XDA Free mobile app
BTW - I only paid something like $11 (Canadian) for my Fantom, and that includes shipping. I don't think it was a huge expense at all.
Sent from my LG-D852 using XDA Free mobile app
I think it's not necessary to use any kind of screen protection.
I have my GNex more than 2 years without using screen protector and it doesn't have any scratches
I bought a tempered glass protector ( Moto X) to my Samsung Galaxy Nexus
Unfortunately I did not find any that fit perfectly but it work rigth to me.... it was very cheap in aliexpress, only 1,60€ :good:
...my naked N5 slipped from my cold, numb fingers and landed flat but face down on a NYC sidewalk a couple days ago. At first it looked like a "soft landing" but no such luck and now I'm looking at a screen replacement (screen itself OK, but glass cracked all to hell).
So now I'm wondering if this could have been prevented simply by a case and not necessarily a screen protector as well. I've used cases such as an Otterbox Commuter in the past but never dropped any of those phones to the extent this one went down. It seems to me that any case with a slight lip on the front -- as most of them must have -- would be enough since the screen itself would not hit the ground.
From research on this forum and web sites I'm currently favoring the Spigen Thin Armor case but am wondering if a high-quality screen protector would also be worth it. My screen at the time it was damaged really had no scratches at all, so the Gorilla Glass was doing its job. Would one of those tempered glass protectors also provide shatter protection? Or would a decent case by itself be sufficient?
FWIW, I've used thin-film protectors in the past but always found them annoying due to bubbles, making the screen less readable, and/or affecting the touch response.
Even with a case on, if there was a small rock or a jagged edge on the ground that nicks the screen, it would have still been toast anyway. This is regardless of if there was a lip protecting it or not. It all depends on what's on the ground by chance.
A tempered glass protector probably could have saved the screen though, since you said it landed flat on its face. Tempered glass protectors are perfect for impacts that land face down, not so much on edges or sides. You will see most demonstrations of tempered glass done with nails, hammers, drop tests, etc. with the phone being impacted directly on the face. If it impacts from the side, there is a good chance the screen could still break as tempered glass isn't really designed to protect from those types of impacts.
That is where the case with a lip comes in. Those are meant to protect from side and edge impacts. Most drops generally don't land flat like yours, they tend to bounce around on corners first, so the case would absorb most of the impact and not the phone directly.
Your best bet is to both have a tempered glass screen protector (for flat impacts), and a bumper frame or TPU case (for the rest).
I use a Nillkin H+ Tempered Glass screen protector and a bumper frame (back not covered as I put a skin on the back) and I'm pretty much covered for most brain lapse moments.
rochrunner said:
FWIW, I've used thin-film protectors in the past but always found them annoying due to bubbles, making the screen less readable, and/or affecting the touch response.
Click to expand...
Click to collapse
Once you learn the hinge method for putting on screen protectors, you won't have air bubbles or dust underneath. You can't even tell my phone has a screen protector on it. Youtube has several videos on how to do it properly.
I refuse to pay big $$$ for glass protectors because you only get one of them, and you either do it right, or throw it away. With plastic protectors, you get several for a few dollars.
wolfen69 said:
I refuse to pay big $$$ for glass protectors because you only get one of them, and you either do it right, or throw it away. With plastic protectors, you get several for a few dollars.
Click to expand...
Click to collapse
That's not true. I applied and removed my Nillkin more then 10 times during the application to get rid of the dust I missed trapped underneath because I suck at applying screen protectors. It reapplied the same every time. All you have to do is make sure you don't firmly press it down and you're fine. This is even after you see the adhesion process occur. It will still peel up. The adhesive takes a few hours to a day (depending on brand) to fully stick/cure.
If a person like me can apply one glass screen protector, anyone else will do it better. One is all you need.
Plastic will only give basic scratch protection and leave a greasy screen after a while. If it takes the same fall his did, the screen would still be done for.
mmmmBACON said:
I use a Nillkin H+ Tempered Glass screen protector and a bumper frame (back not covered as I put a skin on the back) and I'm pretty much covered for most brain lapse moments.
Click to expand...
Click to collapse
What bumper frame do you use? I've been looking for one myself for a while now...
Cases protect the actual body of the phone, and maybe the screen if it happens to land flat. But if a rock of some other elevated object hits the screen then it will be done for. And a plastic screen protector will do nothing, that protects against scratches like from sand. A glass one would be the best bet for shatter protection. I've seen a person take a hammer to a screen with a glass screen protector on. The protector was rekt but the phone screen was fine.
Awesomepie85 said:
What bumper frame do you use? I've been looking for one myself for a while now...
Cases protect the actual body of the phone, and maybe the screen if it happens to land flat. But if a rock of some other elevated object hits the screen then it will be done for. And a plastic screen protector will do nothing, that protects against scratches like from sand. A glass one would be the best bet for shatter protection. I've seen a person take a hammer to a screen with a glass screen protector on. The protector was rekt but the phone screen was fine.
Click to expand...
Click to collapse
There are 2 that I would probably recommend. I'm currently using a transparent bumper case off of ebay. I did a review here http://forum.xda-developers.com/google-nexus-5/accessories/lucency-transparent-bumper-case-review-t2690108. It is $2.88 shipped. If you do choose this one, I would stick to black. After using them for a while now, the various colours tend to stain easily, but the black doesn't. It is just for light drop protection, but since the main body is a harder plastic, it won't absorb a higher drop like a softer bumper frame, or a TPU case would. I personally like it because it is transparent and you can still see the sides of the phone and the skin through it.
The other is the replica Nexus 4 bumper, for the Nexus 5. Mine is still in the mail so I haven't tried it out yet, but others have bought it and it seems to have gotten pretty good reviews overall. http://forum.xda-developers.com/google-nexus-5/accessories/replica-official-nexus-4-bumper-nexus-5-t2698422. It's a little bit pricier at $12.99 off Amazon, or around $8 - $10 off Aliexpress.
rochrunner said:
...my naked N5 slipped from my cold, numb fingers and landed flat but face down on a NYC sidewalk a couple days ago. At first it looked like a "soft landing" but no such luck and now I'm looking at a screen replacement (screen itself OK, but glass cracked all to hell).
So now I'm wondering if this could have been prevented simply by a case and not necessarily a screen protector as well. I've used cases such as an Otterbox Commuter in the past but never dropped any of those phones to the extent this one went down. It seems to me that any case with a slight lip on the front -- as most of them must have -- would be enough since the screen itself would not hit the ground.
From research on this forum and web sites I'm currently favoring the Spigen Thin Armor case but am wondering if a high-quality screen protector would also be worth it. My screen at the time it was damaged really had no scratches at all, so the Gorilla Glass was doing its job. Would one of those tempered glass protectors also provide shatter protection? Or would a decent case by itself be sufficient?
FWIW, I've used thin-film protectors in the past but always found them annoying due to bubbles, making the screen less readable, and/or affecting the touch response.
Click to expand...
Click to collapse
There are many choices for thicker protection cases. Properly applied screen protectors don't have any bubbles.
Sent from my Nexus 5 using Tapatalk
Hey! There's a kickstarter project for someone: A case with airbags that deploy when the phone finds itself in free-fall .
Claghorn said:
Hey! There's a kickstarter project for someone: A case with airbags that deploy when the phone finds itself in free-fall .
Click to expand...
Click to collapse
Those sly people at Honda have already done it.
Claghorn said:
Hey! There's a kickstarter project for someone: A case with airbags that deploy when the phone finds itself in free-fall .
Click to expand...
Click to collapse
I don't think I'd feel comfortable having that in my side pocket close to my family jewels or especially not in my back pocket.
BCSC said:
Those sly people at Honda have already done it.
Click to expand...
Click to collapse
Sent from my Nexus 5 using Tapatalk
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”)Shock Resistant
Compliant with a military standards test (MIL-STD-810G Method 516.6, Procedure IV “Transit Drop”). Device may not perform as tested in all conditions. Test performed in controlled environment. Do not attempt.
Click to expand...
Click to collapse
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
From dbrand
Robot 077 (dbrand)
Apr 13, 15:55 EDT
Hey ######!
Thanks for reaching out. Unfortunately, we have no plans to support the LG G8 ThinQ, as there is simply not enough demand to justify adding it to our portfolio at this time. Sorry about that. Let us know if there is anything else we can help with, and have a great day!
Signed,
A Robot
Click to expand...
Click to collapse
screen protector
https://www.youtube.com/watch?v=9EDYQG6Q7JY
i found this to be a good review of the BodyGuardz Pure Arc Curved Tempered Glass Screen Protector for the G8 ThinQ
i thought it was a shill channel looking at other reviews, but he seems to hate this. it fits GREAT, but only has adhesives on the sides and has a visible dot matrix.
on top of that, he says there is an unnatural hollow feel to it due to the adhesive not being full screen. i imagine this will negatively affect the oled speaker.
this is a $50 screen protector that AT&T is giving away as a part of a promotion.
skins... not much out there and only dbrand has responded (with a NEVER).
the Invisible Phone Guard screen protector was OK and visibility was good, but i found the sound to be very slightly muffled as if it is dampening a certain high frequency.
i'm keeping the back on until i find a decent skin.
this film seems like it will blemish easily. it certainly gets dirty easily. pics here...
Having this phone for a few days now and the OP was not lying about how slippery this phone is. A case or skin is a definite must have!
Ordered a Ringke Fusion X.
Sent from my LM-G820 using Tapatalk
I ordered this case - https://www.ebay.com/itm/273759783563 - I should be getting it later today, I'll post about how well it works.
No sooner did I post this than it came in the mail. Fits on easy, stays on snugly. It's matte rubber without feeling like you're holding a car tire. I had one for my Nexus 6P I really liked and this feels equally good.
This thing is indeed incredibly slippery. I think I'm just going to be extra careful about where I put it down (it's not too slippery in my hands I find, just on certain surfaces), I hate hiding the slick design of the phone with a case. This is also the first phone I've had in a very long time where the camera doesn't bulge out the back, which I really appreciate and don't want to diminish with a case.
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
Well there are a number of skins now at the varies skin sites though I personally skipped them and simply put the phone into an Otterbox Defender case.
I used a cheap curved glass screen protector ( was like $9) and some loca glue (like $10) to make a DIY full adhesive whitestone kit.
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
stamos*bp said:
hey everyone - just got my lg g8 a few days ago. i got my case and glass screen protector yesterday. in my head i feel like maybe the screen protector is 'muting' the sound from the screen. has anyone else noticed this, or is it just in my head?
Click to expand...
Click to collapse
I have not had that issue and I am using a Supershieldz screen protector however my brother who is using an Iphone 7 recently had that issue with one due to a screen protector he picked up at Walmart though it resolved once he removed it.
It's amazing to watch this phone slowly creep off of my wireless charger, which has a rubbery grippy surface! My case arrives today...
I'm using slickwraps for the back of my phone and I like it. I would say they are slightly less precise than dbrand, but still great quality. If people would like photos, please let me know.
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Huge Thanks!
Weston
You may want to think about giving the Skinomi Full Body Skin a try. It definitely keeps my phone from slipping off of surfaces, giving the phone a bit of a plastic-rubber feel while still letting the beauty of the phone show through. The back protector doesn't interfere with any cases and offers a bit of mental relief for those times you want to carry your phone without a case.
Dude, I had my g8 for 2 days. Was in. The washroom and the phone was on a roll of toilet paper (the flat side, obviously haha) and got a notification. Before I knew it the phone slid off and landed on the bottom right corner, heard an alarming "tink" sound but didn't think anything of it. A few mins later I saw a small crack, then I looked again and realized that there were multiple cracks on the screen. Ended up getting it replaced by my carrier, I said it was damaged in shipping. Point is that this phone is a glass cannon: it's very powerful for specs but it will have a broken screen if you sneeze on it the wrong way. This is one of the massive downsides to the new gorilla glass. Sure it's scratch resistant but with the wrong amount of pressure it will get destroyed :/
doblebo said:
This is one slippery mofo. Any skins out there? Less than 24 hours and this thing keeps slipping off what I thought were flat level surfaces. If I set it flat on the palm of my hand or on a newspaper on a table, I can watch it slowly inch its way to its doom.
I hate to admit I fell for this line from LG:
But if you actually look up what this means... you see its pure and simple marketing buII**** as your "controlled environment" can consist of a careful 4 foot drop onto plywood.
So yes.. skins to keep this thing from slipping are needed.
I ordered the Invisible Phone Guard front/back and will show how it works here when it is received. ATT was supposed to give me a screen protector.
I attached a picture to show what happened here. This is from 2 or 3 falls only 2'5" drop onto a laminate floor. The scratches cannot be seen without good light and the photos were taken using a DSLR and macro lens.. so it isn't terrible, but rest assured this has weakened the gorilla glass and the front screen will eventually shatter if it keeps jumping off tables.
Click to expand...
Click to collapse
I've dropped this thing so many times because it's so slippery. Seems like every other week I hear it jump off a table a few minutes after I leave the room.
I have a crack on 3 corners, but nothing across the screen. My case (which I tend to take off when connecting it to things such as controllers or some USB cables) almost hides the cracks.
However, these are more like small missing chunks of glass on the corners. I've never had such a fragile phone. I tried super glue on the corners to keep it from spreading, but eventually just went to town on the corners with silicone conformal coating that I had sitting around. It seems to be working great and keeps the little shards coated and sort of glued in there. I kind of prefer this to replacing the screen as replacements have only gone down slightly to around $150 shipped from China and I know I'll just end up breaking that one.
There's always been one or two deal breakers with all of my LG phones and that's why I kept going to a different manufacturer as soon as I could. I hate to say it but after this, I'm never going back to LG again no matter what cool unique feature they're wooing me with.
I basically used this phone with a broken screen for 5 months. Replacements are still $150 (better than $200 back when it broke). It dropped approximately 1.5ft face down onto a clay tile floor and front screen has cracks all over. It almost looks somewhat inverted now as if the screen was designed to have tension. Well I went and got a note 10+ and man it is great to have a real phone again. Doesn't have some of the edgy LG stuff that I really loved and theres no headphone jack... but bigger/brighter screen that isn't broken is so nice to have. Good luck with your screens guys.... I'll replace mine when the price is reasonable and either go back to using it or put it on ebay.
Jaa-Yoo said:
I'm using a Nillkin slim case, adds no bulk and provides some grippiness.
I also have a Spigen Crystal Clear gel case that's very nice, but is more bulky than the Nillkin.
As for screen protectors, i've found that glass ones are useless for this phone. I tried a couple full adhesive brands with the idea that i would fill the little gap on the edges with LOCA but of the 6 protectors that i applied, they all had a problem sticking fully in some flat areas of the screen. It was always the exact same spots so I came to the conclusion that the LG screen itself isn't 100% flat in those areas so I settled on the Ringke Dual Easy Film screen protector.
Click to expand...
Click to collapse
I have reached the same conclusion about the screen not being flat enough to utilize a hard glass protector even if you avoid the very curved edge portions. I tried the curved, glued only on the edge types first but that always had a weird optical effect and wasn't very ruggedly glued on, none in the middle. Why? I haven't tried using whitestone glue yet.
So the suggested one sounds interesting. https://www.amazon.com/Ringke-Compa...dge-Application/dp/B07NHMBNLH#customerReviews
I think I'll watch the videos first.
I also found these but yes a firm, solid piece of glass is a no go IMHO. Not a fan of these new case designs for all the new phones. Why de do dat?
https://www.amazon.com/dp/B07QQD2BCG/ref=cm_sw_r_cp_apa_i_MkrHDb48GTKZN
https://www.amazon.com/gp/product/B07QB9MN28/
Still hoping for a solution. I had great luck with Spigen Crystal screen protector SGP10855 for my LG G3 which is hard but I believe would be flexible enough if it skipped the curved edges but they don't make anything like that?
UPDATE: After watching the LG G8 video on YouTube I decided to go with the Rinke.
I'll report back. This will be 4th type attempted.
I put it on this morning. It is pretty easy to get this on with good alignment and no bubbles.
Two things.
1. If you watch the YouTube instructions the place where the dust dust cleaning sticky backing splits in half does leave a slightly perceptable crease in the soft protector. Maybe it will smooth out with time? It did not with the squeegee.
2. It's soft so you can possibly nick with your fingernails and it's also easy to lift an edge ever so slightly during final finishing so be careful.
I see no installation flaws but it also isn't a hard glass but then those do not install properly even when undersized because the screen is not level as you get near the edges as far as 1/4" away. The film eliminates this issue but will it protect and stay on.
We shall see.
I sell a lot of these devices and it is even hard to photograph them on a smooth surface because they will start around on my table. Put it in a case, the screens are expensive.