Develop Bugs

Pit 803

Anyone mind giving me a link to downloading only the 803.pit file?
I have seen it on the forums, but then its only downloadable with another firmware, my internet data bundle won't last if I download that too!
Thanks in advance!!

here it is!

https://www.wuala.com/Samsung Galaxy S/Firewares , Updates and Odin/Odin & .PIT/?key=AfzUZSU4SpKU
Thanks to Darkstriker (http://forum.xda-developers.com/showthread.php?t=723596)

here you have it
Edit: too slow

At least, no one will say XDA members lack the will to help

it would also have been the first hit on google.

trasig said:
it would also have been the first hit on google.
Click to expand...
Click to collapse
Actually, it's not : http://www.google.dk/search?hl=da&c...=pit+803&btnG=Søg&aq=f&aqi=&aql=&oq=&gs_rfai=

Thanks Mopral, and everyone else who posted ^^
First time I'm flashing my i9000, so just making sure I'm following everything step by step!

Then surely you shouldn't be using a PIT at all?

dirk1978 said:
Then surely you shouldn't be using a PIT at all?
Click to expand...
Click to collapse
Froyo isn't available through Kies yet in SA, only in the next week or two
So I've decided to skip the wait and flash with the latest I9000XWJPA firmware, apparently the 803.pit is required, as well as re-partition with the 512.pit with the I9000XWJM8 firmware. Perhaps I'm making a mistake, terribly new to Android

For reference all PIT files and most known firmwares are available from www.samfirmware.com.

Ah, PIT files are only partition information templates for Odin to move the sizes of the internal device partitions around. Everyone should just be using the 512 PIT now as the others were just development hacks. You will already have the 512 layout so there's no reason to even load it into Odin, always just let it flash without repartitioning.
But if you're not sure, then follow the samfirmware instructions, it's making you use the 512 PIT anyway, the 803 being loaded into Odin but repartition not being ticked does nothing.

Arkane316 said:
Froyo isn't available through Kies yet in SA, only in the next week or two
So I've decided to skip the wait and flash with the latest I9000XWJPA firmware, apparently the 803.pit is required, as well as re-partition with the 512.pit with the I9000XWJM8 firmware. Perhaps I'm making a mistake, terribly new to Android
Click to expand...
Click to collapse
You don't need a pit or I9000XWJM8, what you need is to flash directly CODE as PDA, MODEM as PHONE and CSC as CSC...no repartition.
If you must re-partition then use 512.pit and these files from here:
http://forum.xda-developers.com/showpost.php?p=8911755&postcount=83
You need the first download and only one of the three CSC files(I recommend XEE).
Extract once using 7-zip, then load the files as I wrote earlier and PIT as 512.pt and check Re-partition.

[Ramad] said:
Actually, it's not : http://www.google.dk/search?hl=da&c...=pit+803&btnG=Søg&aq=f&aqi=&aql=&oq=&gs_rfai=
Click to expand...
Click to collapse
Actually it is. Just dont use weird localized google. google.COM is there for a reason.

dupel said:
Actually it is. Just dont use weird localized google. google.COM is there for a reason.
Click to expand...
Click to collapse
Hi
I there a reason for you to act as a policeman in this forum?

New EURO Firmware - P1000XXJM6 - UPDATED

You are flashing the below at YOUR OWN RISK
This is only for the Euro version, at&t version, T-mobile version or any other GSM version of the Tab. this is NOT for any CDMA version.
This is a new Tab firmware that just leaked out (P1000XXJM6)
So far the know pros are:
1) THE BROWSER IF FINALLY FIXED! it is very smooth even with flash. i am very impressed.
2) Users are reporting new widgets.
3) The drop down drawer is smoother.
4) New readers hub
5) tweaked email client
6) better camera focus?
7) ROM feels very smooth.
Update 11/29/2010
This is an updated package which should be safer to flash via Odin.
All credits are going to Richthofen who compiled this package for us.
As it seems that original package posted in this thread was not intended to be flashed via Odin.
Samsung has introduced a new FW programming method which also supports the upcoming phones. I don´t know if it is already supported by the newest Kies version.
The new format is basically the same as Odin only smarter with a few tricks and more stable.
Richthofen has prepared a new package for us that is flashable via Odin and should work much better with less problems.
Below are the download links and instructions for everything you need to flash P1000XXJM6.
1) Download the the file HERE and extract the it
2) Inside the ZIP you will find Odin 1.7 + PIT file + PDA +Modem + CSC files.
3) Open Odin, select the PIT file + PDA + Modem + CSC into their respective places.
4) Make sure repartition is CHECKED.
5) put the phone in download mode and connect it to your computer. start flashing.
6) The device will reboot. If you are getting tons of FC's on boot, reboot into recovery and do a factory reset.
Done.
** You can root using SuperOneClick method. Other methods do not work at this time.
**If you are on at&t and using the at&t model, please reflash the Bell modem to gain 850Mhz back.

clubtech said:
Please be advised that i have not yet tested this firmware so i don't know if it works and i am not responsible if it bricks your Tab!!!
The brave ones are welcome to try and report back.
It was originally labeled as P1000XXJM9 on the Samsung FUS server however it looks like it is P1000XXJM6.
Download: http://www.multiupload.com/OO6CWYBQYN
Release date: 11/25/2010
Flash: latest Odin with no repartition (as this does not look like it is a full flash). No PIT file needed as it is not a full flash.
Click to expand...
Click to collapse
Taking one for the team here, flash failed, Tab totally unresponsive.

Sorry it failed.
can u detail the below please:
- what is your tab model?
- are u still able to into download mode to flash to a working firmware ?
- are u sure you did not select repartition when flashing?

clubtech said:
Sorry it failed.
can u detail the below please:
- what is your tab model?
Bell Tab running P1000XXJK5
- are u still able to into download mode to flash to a working firmware ?
Unable to boot, access recovery or download mode, screen black, computer and Odin do not recognize cable connection.
- are u sure you did not select repartition when flashing?
Click to expand...
Click to collapse
Did not repartition.

just flashed, browser MUCH better , smooth scrolling on engadget .
You need to flash dbdata from this post:
http://forum.xda-developers.com/showpost.php?p=9305891&postcount=1

Can u detail exactly how you flashed this?
Which Odin version ?
Repartirion or not?
Which tab model do you have ?

also new widgets, new notes in browser

flashed with odin 1.7 , no repartition. After flash tab reboot in download mode again.
Flashed again but only dbdata .

cezarc1 said:
flashed with odin 1.7 , no repartition. After flash tab reboot in download mode again.
Flashed again but only dbdata .
Click to expand...
Click to collapse
Thanks.
I wonder why user above you bricked then.
Which version of the tab are u using? The euro one or something else?

euro version

Gonna try flashing this firmware
So just to confirm, it's only partial yes?
Thanks

risq said:
Gonna try flashing this firmware
So just to confirm, it's only partial yes?
Thanks
Click to expand...
Click to collapse
Correct. Let us know the resutls and exactly how you flashed and Odin version used and your tab version.

cezarc1 said:
just flashed, browser MUCH better , smooth scrolling on engadget .
You need to flash dbdata from this post:
http://forum.xda-developers.com/showpost.php?p=9305891&postcount=1
Click to expand...
Click to collapse
can you run acid3 test, is the result still 93/100? Thanks.
http://acid3.acidtests.org/
Sent from my GT-P1000 using Tapatalk

Ok,
Got the latest version installed by flashing the latest update with odin, then flashing dbdata.rfs afterwards....
only thing is, it's now causing launcherpro and other apps to force close, so I'm going to re-flash JJ4 / JK5 clean then re-apply this update.

antz88c said:
can you run acid3 test, is the result still 93/100? Thanks.
http://acid3.acidtests.org/
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Still 93/100

im guessing its not from samfirmware?
JM is kinda weird since on samsung code JM means J = 2010 and M = 13th month which is ......
K is november and L should be the latest one >.< (december)
where did you get this one anyway?

Ok - got it back to life....re-flashing now

cezarc1 said:
Still 93/100
Click to expand...
Click to collapse
But is the browser really smoother ? Even after you restored all your apps?

clubtech said:
It was originally labeled as P1000XXJM9 on the Samsung FUS server however it looks like it is P1000XXJM6.
Click to expand...
Click to collapse
Check this post for more info about recent releases:
http://forum.xda-developers.com/showpost.php?p=9422970&postcount=4
"JM" is weird...the dates don't make sense.

risq said:
Ok - got it back to life....re-flashing now
Click to expand...
Click to collapse
How did you get it back to life?
Sent from my SGH-T849 using XDA App

[Q] flashed official kitkat and kies wont recognize it

After running into some issues while upgrading to an official kitkat firmware I managed to boot up my phone but now it doesnt get recognized by kies even though its official. I also cant see which csc Im on since when I type in *#1234# it simply goes away from the screen as if its been wiped.
any clues? should i flash something else over?

kostas90 said:
After running into some issues while upgrading to an official kitkat firmware I managed to boot up my phone but now it doesnt get recognized by kies even though its official. I also cant see which csc Im on since when I type in *#1234# it simply goes away from the screen as if its been wiped.
any clues? should i flash something else over?
Click to expand...
Click to collapse
What did you use to upgrade? Kies? or Odin?

feckinfinch said:
What did you use to upgrade? Kies? or Odin?
Click to expand...
Click to collapse
Odin

kostas90 said:
Odin
Click to expand...
Click to collapse
Try flashing this in the attachments using odin the same wayy you did the stock firmware, just extract the rar file and use the .md5, and then do a full factory reset then it should recognize.

forget KIES ( completely useless) ! flash SamMobile's firmwares with ODIN !

feckinfinch said:
Try flashing this in the attachments using odin the same wayy you did the stock firmware, just extract the rar file and use the .md5, and then do a full factory reset then it should recognize.
Click to expand...
Click to collapse
Ill get around to it in a few days when my exams will be over. need to back everything up first and that will take a minute. thanks!!

[Q] NJ3 Official ROM out for VM?

Hi all,
Over on Android Forums a thread has posted claiming Keis/OTA is downloading a new version of the Stock ROM. Version NJ3? Has anyone here seen this?

Yes my wife got it last week.

Any benefit seen? Or is it more a bloatware update?

She hasn't noticed anything. Hard for her to tell really not knowing anything lol

Has anyone had a chance to grab this updated tar? I am on full CM11, I will give it a go via Keis for PC if it would still attempt to download. I know it won't actually work not being stock.

vsanch24 said:
Has anyone had a chance to grab this updated tar? I am on full CM11, I will give it a go via Keis for PC if it would still attempt to download. I know it won't actually work not being stock.
Click to expand...
Click to collapse
im checking this link out http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=sph-l710

6th_Hokage said:
im checking this link out http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=sph-l710
Click to expand...
Click to collapse
Interesting, I downloaded the NJ3 (in the middle of the list) but not sure how at apply it. Do you have any ideas? Or do we just change the .zip to a .tar and ODIN will work its' magic?

vsanch24 said:
Interesting, I downloaded the NJ3 (in the middle of the list) but not sure how at apply it. Do you have any ideas? Or do we just change the .zip to a .tar and ODIN will work its' magic?
Click to expand...
Click to collapse
i just checked it out.....it's not the actual update unfortunately open the zip and you'll see what i mean

That's the source code for the updated kernel. It doesn't contain any platform binaries

CNexus said:
That's the source code for the updated kernel. It doesn't contain any platform binaries
Click to expand...
Click to collapse
it has a folder in it called platform tho but when you read the Platform_read_me.txt file thing it says it's for making modules but that you have to download the module stuff separately...

You won't get anything from that file in terms of getting a rom going, trust me.
The most you could do is build the kernel zImage, but you're even limited in that because you'd need the updated boot.img for repacking your compiled zImage.

CNexus said:
You won't get anything from that file in terms of getting a rom going, trust me.
The most you could do is build the kernel zImage, but you're even limited in that because you'd need the updated boot.img for repacking your compiled zImage.
Click to expand...
Click to collapse
i see thats good info thank you

Anyone have luck grabbing the full updated rom? I tried with kies but this happened: (from a post I did on Android Forums)
... I think something has changed as now there is a small program that downloads into the temp folder. Once that finishes it asks for elevated permissions and then starts a new direct download to the phone while it is attached. I am guessing they got wind of these instructions and changed their kies upgrade method.....

how install a new modem?

I think the key for unlock the Sim card its the modem..
How to change the modem??
Risk??
Thanks

fabioplata said:
I think the key for unlock the Sim card its the modem..
How to change the modem??
Risk??
Thanks
Click to expand...
Click to collapse
Big risk, not easy, and probably won't fix it.

extract modem.bin
Hi,
How to extract modem.bin ? I extract rom but i don't see de modem.bin...
Just :
boot.img
cm.bin
recovery.img
sboot.bin
system.img
thx

I mean
LouCroquant said:
Hi,
How to extract modem.bin ? I extract rom but i don't see de modem.bin...
Just :
boot.img
cm.bin
recovery.img
sboot.bin
system.img
thx
Click to expand...
Click to collapse
I mean, always when I flash a ROM the baseband its the same, don't change..
I think the Sim card lock it's in the baseband maybe if I change this baseband for the W8 maybe can unlock the Sim card.
Thanks

i tried installing just the modem.bin but odin fails everytime

batillojr said:
i tried installing just the modem.bin but odin fails everytime
Click to expand...
Click to collapse
Hi,
You must install the bootloader and the associate modem.
You can see this post : http://forum.xda-developers.com/showpost.php?p=60112855&postcount=3
@fabioplata I solved my problem by changing my decompression software ... now I extracted modems French providers to offer the download.

Tried that too.. It won't let me do either.. Odin ends in Fail as well

You must use odin 3.10.6 for this. I think you must choose your bootloader.tar or bootloader.tar.md5 and modem.tar or modem.tar.md5. After this, you can connect your phone for flash, only after. Sometimes the modem/baseband needs to be flashed 2 or even 3 times till it will get flashed correctly.

LouCroquant said:
You must use odin 3.10.6 for this. I think you must choose your bootloader.tar or bootloader.tar.md5 and modem.tar or modem.tar.md5. After this, you can connect your phone for flash, only after. Sometimes the modem/baseband needs to be flashed 2 or even 3 times till it will get flashed correctly.
Click to expand...
Click to collapse
done to death ! ... it doesn't work

Another problem perhaps, enable USB debugging, a cable problem , bad files ( check the source ) , the USB port of your PC , the usb drivers ...

LouCroquant said:
Another problem perhaps, enable USB debugging, a cable problem , bad files ( check the source ) , the USB port of your PC , the usb drivers ...
Click to expand...
Click to collapse
i tried 3 diff ports, 3 different modems and 2 usb cables... you name it, I tried it
---------- Post added at 10:21 PM ---------- Previous post was at 10:19 PM ----------
ive been looking for a flashable modem thru twrp , but no luck so far. ... maybe it will work idk

Do you have the modem? If so just create a flashable from it.

Do you have the steps to do that?

batillojr said:
Do you have the steps to do that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2746044
Try that.
Or
http://www.droidviews.com/create-flashable-zips-cwmtwrp-recovery/
Or
http://theandrotalk.blogspot.com/2015/03/how-to-collect-flashable-rom-of-stock.html
If you get hung up let me know I maybe able to find time to build it for you this weekend or early next week.

I was trying but I'm a bit scared to screw this up .. I think I'll hold on for now ..

batillojr said:
I was trying but I'm a bit scared to screw this up .. I think I'll hold on for now ..
Click to expand...
Click to collapse
can you upload the file? i can test it on mine

I didn't make one, mostly cause the instructions are a bit different and some outdated, I didn't wanna guess it and risk bricking the phone

batillojr said:
I didn't make one, mostly cause the instructions are a bit different and some outdated, I didn't wanna guess it and risk bricking the phone
Click to expand...
Click to collapse
Do you have the modem you want to try to flash? Do you have a currently flashable modem? (Does not have to be for your device) If so open the .zip with 7zip and replace the modem.bin with the one u want to flash.
Or upload the modem you want to flash and ill make u a .zip

NexVision said:
Do you have the modem you want to try to flash? Do you have a currently flashable modem? (Does not have to be for your device) If so open the .zip with 7zip and replace the modem.bin with the one u want to flash.
Or upload the modem you want to flash and ill make u a .zip
Click to expand...
Click to collapse
this is the modem for G925W firmware is currently on my S6:
https://docs.google.com/uc?id=0BzlaMjh6ZQIWQXJKN1UyaDR3S00&export=download

batillojr said:
this is the modem for G925W firmware is currently on my S6:
https://docs.google.com/uc?id=0BzlaMjh6ZQIWQXJKN1UyaDR3S00&export=download
Click to expand...
Click to collapse
Try this.
https://www.dropbox.com/s/tcre9gy7f0kr8ih/G925W_Modem_File.zip?dl=0