Hi All,
I have recently fashed down from JP3 to JP2 to JM5. I am with BT Mobile and it keeps adding me onto Vodafone. When I click on Settings > Wireless and Network > Mobile Networks > Access Point Names > Add. I can only type in settings manually.
I flashed with the following files:
PDA: I9000XWJM5
Phone: I9000XXJM3
CSC: I9000OXXJM1
I was able to choose from a list of providers on the stock ROM and also with JP3 & JP2 and select BT Mobile.
Can anyone point me in the right direction to get these settings automatically as opposed to trying to find all the relevant settings and input them manually?
Thanks in advance
What's BT Mobile?
BT Mobile is a mobile network from British Telecom which is carried over the Vodafone network. It uses it's own GPRS, WAP and MMS settings which are different to Vodafones.
Related
Has anybody managed to extract the O2 Network settings configurator file from the official o2 ROM. While B&B has such a utility the settings for Ireland are incomplete for MMS etc.
Anybody got the o2 file??
nope sorry
Na, I tried before but there are files all over the place, not just in the extrom image.The GPRS ones for Ireland work fine in B&B4. Is that the one missing MMS? You can probably get them from the o2.ie site anyway.
http://forum.xda-developers.com/showthread.php?t=317070&page=6
The Screen shots of the MMS Config for O2 Ireland Billpay are here just look down the page.
Best just to add them in manually as I did easier than an applet.
Thanks for the help
Many thanks for the help, all is now working!
Hey Folks,
Can Anyone who can cook up a rom please make a Telstra Branded one? one that already has modded registry so we can view foxtel, The Proxy Manager software and all the stuff the other telstra roms have? I think us Aussie Telstra Users would highly appreciate it!
Thanks!
you can set all those things up yourself you know!
And i doubt we should expect a 6.1 telstra/imate rom again considering they dropped the phone before christmas.
ok .. then why dont you post all the reg settings / mods etc?
well mine works cause i hunted down the solutions myself and got them, like you should do instead of expecting someone else to do it for you!
its really not that hard! the vid stuff i got from whirlpool.
Search and ye shall find
Attached is a zip file containing the entire telstra ext-rom, this should contain any of the cabs you need.
Telstra
zathire said:
Hey Folks,
Can Anyone who can cook up a rom please make a Telstra Branded one? one that already has modded registry so we can view foxtel, The Proxy Manager software and all the stuff the other telstra roms have? I think us Aussie Telstra Users would highly appreciate it!
Thanks!
Click to expand...
Click to collapse
Some rom's do support telstra, eg crc's 6.1.
You can "add" the telstra 3g bands manually however to any rom i believe, as I do, eg on tnt's rom I needed to add.
You then need to use the telstra proxy to access the sites etc(my place and such), BUT depending on what you want to do you may need to switch it on/off, very easy to do anyway.
Search for telstra 3g and you will find all info, otherwise use this: Telstra settings for 3g
--------------------------------------------------------------------------------
Hi all, been down the same road with 3g Telstra.
There is a fix to set up all settings etc fairly easy when flashing with wm6.
1. do your flash...
2. need to edit the bands to allow our phone to use Telstra's frequencys
(see below)
3. run Telstra's own setup cab that they use in the original imate ext_rom
4. just go into settings/phone/band...select "auto" on network type
select "GSM(900+1800)+UMTS(850)"
thats about it
Works for me everytime I've flashed, get wap when its out of range for 3g and get telstra internet 3g every other time
E=Edge average, 3g=Umts=H on connections
notes:
--------------------------------------------------------------------------
2. Telstra "odd" bands (must do some reg exports for next time, and to share), use a reg editor like resco's etc
--------------------------------------------------------------------------
(taken from XDA site) if anyone else needs them, This Registry patch works for the Hermes.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandT ype]
"ItemCount"=dword:00000006
"ItemName1"="Auto"
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemName4"="UMTS(2100+800)"
"ItemName5"="GSM(900+1800)+UMTS(2100+850)"
"ItemName6"="GSM(900+1800)+UMTS(850)"
"ItemValue1"=dword:00000000
"ItemValue2"=dword:00000001
"ItemValue3"=dword:00000002
"ItemValue4"=dword:00000003
"ItemValue5"=dword:00000004
"ItemValue6"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\UMTS\BandSelection]
"Band"=dword:00000005
You really just need to add ItemName5 and 6, and ItemValue5 and 6, and change the ItemCount from 4 to 6 (as you added two options) using your favorite Registry Editor.
Do a soft reboot of the phone. Now you can select the NextG option GSM(900+1800)+UMTS(850)
-------------------------------------------------------------------------
3. copy the telstra cab onto your phone then run, this sets up the Telstra Wap and Teletra Internet connection, as well as the proxy manager.
It does load some other junk onto the system like telstra bussiness etc , but this is easy to delete or move to another start menu group.
sometimes when setting up email accounts and such you may have to fiddle with the programmes "connect with " network setting and point it to :telstra internet or as in my case use "work" connection.
hope this helps
Fadge
Attached Files Telstra_V5.2.CAB (224.5 KB, 13 views)
you only need the reg fix (if not already enabled) then choose the band then load in the gprs/3g modem settings and the proxy.
that telstra cab loads a tsk and sets the home page to the old wap site, the proxy manager is kind of cute if you are too lazy to load the proxy back in although the only thing you need the proxy for is to use whereis and some of the other crap telstra services.
The proxy will just slow down msn and general internet use.
fadge said:
Some rom's do support telstra, eg crc's 6.1.
You can "add" the telstra 3g bands manually however to any rom i believe, as I do, eg on tnt's rom I needed to add.
You then need to use the telstra proxy to access the sites etc(my place and such), BUT depending on what you want to do you may need to switch it on/off, very easy to do anyway.
Search for telstra 3g and you will find all info, otherwise use this: Telstra settings for 3g
--------------------------------------------------------------------------------
Hi all, been down the same road with 3g Telstra.
There is a fix to set up all settings etc fairly easy when flashing with wm6.
1. do your flash...
2. need to edit the bands to allow our phone to use Telstra's frequencys
(see below)
3. run Telstra's own setup cab that they use in the original imate ext_rom
4. just go into settings/phone/band...select "auto" on network type
select "GSM(900+1800)+UMTS(850)"
thats about it
Works for me everytime I've flashed, get wap when its out of range for 3g and get telstra internet 3g every other time
E=Edge average, 3g=Umts=H on connections
notes:
--------------------------------------------------------------------------
2. Telstra "odd" bands (must do some reg exports for next time, and to share), use a reg editor like resco's etc
--------------------------------------------------------------------------
(taken from XDA site) if anyone else needs them, This Registry patch works for the Hermes.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandT ype]
"ItemCount"=dword:00000006
"ItemName1"="Auto"
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemName4"="UMTS(2100+800)"
"ItemName5"="GSM(900+1800)+UMTS(2100+850)"
"ItemName6"="GSM(900+1800)+UMTS(850)"
"ItemValue1"=dword:00000000
"ItemValue2"=dword:00000001
"ItemValue3"=dword:00000002
"ItemValue4"=dword:00000003
"ItemValue5"=dword:00000004
"ItemValue6"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\UMTS\BandSelection]
"Band"=dword:00000005
You really just need to add ItemName5 and 6, and ItemValue5 and 6, and change the ItemCount from 4 to 6 (as you added two options) using your favorite Registry Editor.
Do a soft reboot of the phone. Now you can select the NextG option GSM(900+1800)+UMTS(850)
-------------------------------------------------------------------------
3. copy the telstra cab onto your phone then run, this sets up the Telstra Wap and Teletra Internet connection, as well as the proxy manager.
It does load some other junk onto the system like telstra bussiness etc , but this is easy to delete or move to another start menu group.
sometimes when setting up email accounts and such you may have to fiddle with the programmes "connect with " network setting and point it to :telstra internet or as in my case use "work" connection.
hope this helps
Fadge
Attached Files Telstra_V5.2.CAB (224.5 KB, 13 views)
Click to expand...
Click to collapse
thought id attach the cab you mentioned...
RE:
hey guys, sorry I haven't replied until now, I've been fairly busy with work and the family.
OK Lets say I wanted to cook up a rom myself. Where can I find a clean wm6.1 rom and a kitchen to cook it in? I would have already probably cooked up a rom myself by now but it's hard to find a nice clean ROM and kitchen to use.
st3v3 said:
thought id attach the cab you mentioned...
Click to expand...
Click to collapse
What directory in the phone do you copy it to? Is it supposed to recognise it straight away or do you have to execute the file in the phone once you've copied it over??
manbarepig. XD rawr
Hi
I buyed a unlocked samsung I780 from UK, but i can't connect on the internet (VIVO 3G RJ - Brazil), when i try to connect, i receive a information "cannot connect for an unknown reason". I already tried to configure the connections to use the VIVO settings (zap.vivo.com.br, wap.vivo.com.br) but it seems to always use the settings provided by Operator Settings, which i can't add/remove the default operators (Starhub, M1 and Singtel).
Is there anyway to modify the operator settings to automatic set the VIVO connection settings or configure to not use the automatic settings provided?
Due to the lack of the OXC csc in the new bada 2.0 firmware, I have uploaded the full S8500XPKG6_OXC_Bada 2.0
with socialhub premium activated. Remember, this OXC csc is for Spain, Portugal and Greece.
Just install, and go to Pre-configuartion setting, and select your csc.
That's all. Enjoy.
Download from here: http://www.megaupload.com/?d=4EM2VO4L
spacks said:
Though to the lack of the OXC csc in the new bada 2.0 firmware, I have uploaded the full S8500XPKG6_OXC_Bada 2.0
with socialhub premium activated. Remember, this OXC csc is for Spain, Portugal and Greece.
Just install, and go to Pre-configuartion setting, and select your csc.
That's all. Enjoy.
Click to expand...
Click to collapse
Thanks Spacks, that what i was waiting!
Do we need to set debug level low in this firmware too?
I live in India, can you please explain how to configure the CSC settings in detail.
Thanks.
AbhishekS said:
I live in India, can you please explain how to configure the CSC settings in detail.
Thanks.
Click to expand...
Click to collapse
The process is explained in details here: http://forum.xda-developers.com/showthread.php?t=1179033.
Best of luck.
haigoeo said:
Thanks Spacks, that what i was waiting!
Do we need to set debug level low in this firmware too?
Click to expand...
Click to collapse
I left debug level on it's default; I did not change it. I have not noticed any crash so far so good. But it may be advisable to do so if crashes occur at random.
Read more on the observations in this new firmware here: http://forum.xda-developers.com/showthread.php?t=1193409
What changed? From what I saw in the normal version already has msn.
Which csc you chose?
what is da diff between this and another one pl explain socil hub includ
for india can u make it ?
Could you please post pictures for us to know the difference?
Social Hub Premium has been active S8500XPKG6 Frimware
Link : wwwmultiupload.com/QWLIPUHK75
password : badaturkiye.com
After installing the rom, from the keyboard made this code:
*#5239870*# then select PreConfig then *#27236*# then press and select the code DBT & KOR
hakan5637 said:
Social Hub Premium has been active S8500XPKG6 Frimware
Link : wwwmultiupload.com/QWLIPUHK75
password : badaturkiye.com
After installing the rom, from the keyboard made this code:
*#5239870*# then select PreConfig then *#27236*# then press and select the code DBT...
Click to expand...
Click to collapse
just nw i flashed with this fw but where is pus notifaction option
in facebook ther only contac sync and canl is der even nt mail also hw i can activate Shp pl tell me ihave flash with fw
Social Hub Premium has been active S8500XPKG6 Frimware
Link : wwwmultiupload.com/QWLIPUHK75
password : badaturkiye.com
After installing the rom, from the keyboard made this code:
*#5239870*# then select PreConfig then *#27236*# then press and select the code DBT & KOR
Hi, I have install this custom firmware in my samsung wave, but I´ve synchronized my gmail account and there is a connections that I haven´t done form Germany.
Why has this happened?
I´m from Spain and this is te ip´s connections: 195.124.9.241 195.124.9.242 195.124.9.243 195.124.9.244 195.124.9.245 195.124.9.246
Kind regards.
Anyel06 said:
Hi, I have install this custom firmware in my samsung wave, but I´ve synchronized my gmail account and there is a connections that I haven´t done form Germany.
Why has this happened?
I´m from Spain and this is te ip´s connections: 195.124.9.241 195.124.9.242 195.124.9.243 195.124.9.244 195.124.9.245 195.124.9.246
Kind regards.
Click to expand...
Click to collapse
Hello Anyel06,
This firmware does not include Germany as it is for tOXC csc.
Just download the firmware from the link provided at the first page.
After installation, go to pre-Configuration setting and select the appropriate csc (e.g FOP for Movistar, YOG for Yoigo, etc). All the network setting will be done automatically. You don't need to do it yourself.
The pre-configurantion is ok, but I don´t said that. I said that in my gmail appears ip connections, from wich i haven´t connected, either in time or place.
This is the ip information:
IP address [?]: 195.124.9.242
IP country code: DE
IP address country: Germany
IP address state: Hessen
IP address city: Frankfurt Am Main
IP address latitude: 50.1167
IP address longitude: 8.6833
ISP of this IP [?]: Verizon Deutschland GmbH
Organization: SAMSUNG SDS EUROPE LTD
Host of this IP: [?]: nat-egress-g-02.fra.samsungsocialhub.com
Local time in Germany: 2011-08-05 19:49
Greetings.
sum time its showing service not available y its showing ? when i restart fone then its working but after sum time again sevice not available
After flashing the KH3 beta firmware, the texts automatically go to SIM after roughly 50 messages yet there seems to be no way to change it? Ay possibility or will it require reflash?
have the same problem... tried some things but reflash is the only one that solves it for a while... please, can someone help us? it's a pain
zm15011992 said:
After flashing the KH3 beta firmware, the texts automatically go to SIM after roughly 50 messages yet there seems to be no way to change it? Ay possibility or will it require reflash?
Click to expand...
Click to collapse
This problem is solved by installing the correct csc file from pre-Configuration setting.
For example, if your csc is DBT, you need to set pre-Configuration to DBT after flashing.
forgive my ignorance, how would we do that?
edit: just flipped my csc onto DBT as that "supposedly" covers UK aswell as Germany etc, reset the languages back to English etc and see how that ends up
Correct setting in Pre-Configuration menu ensures that you benefit from all the local services offered by your network operator... network settings, language, keyboard,etc.
To set your csc, go to Pre-Configuration menu as follows:
On keypad enter this code: *#5239870*# => (Admin setting) 2 Pre-configuration => (Operator code; tap the blank space to pop up the keypad) *#27236*# => Done => Confirm => (CSC Pre-configuration; here select your csc) Install.
If you have installed with the OXA csc (S8500OXA), below is a list of countries and their corresponding csc files:
1. KOR = Default
2. SKT = Korea
3. XEF = France
4. XEO = Poland
5. XEU = UK and IRE
6. DBT = Germany
7. ITV = Italy
So if you are from the UK, your correct csc file is the XEU.
At least someone knows what they are doing cheers for the info
this issue can be solved just by hard reset after flashing,,,,thats it no need pre configuration
pre config saves a hard reset and achieves same ends, I guess just use whichever way your comfy with