Hey Folks,
Can Anyone who can cook up a rom please make a Telstra Branded one? one that already has modded registry so we can view foxtel, The Proxy Manager software and all the stuff the other telstra roms have? I think us Aussie Telstra Users would highly appreciate it!
Thanks!
you can set all those things up yourself you know!
And i doubt we should expect a 6.1 telstra/imate rom again considering they dropped the phone before christmas.
ok .. then why dont you post all the reg settings / mods etc?
well mine works cause i hunted down the solutions myself and got them, like you should do instead of expecting someone else to do it for you!
its really not that hard! the vid stuff i got from whirlpool.
Search and ye shall find
Attached is a zip file containing the entire telstra ext-rom, this should contain any of the cabs you need.
Telstra
zathire said:
Hey Folks,
Can Anyone who can cook up a rom please make a Telstra Branded one? one that already has modded registry so we can view foxtel, The Proxy Manager software and all the stuff the other telstra roms have? I think us Aussie Telstra Users would highly appreciate it!
Thanks!
Click to expand...
Click to collapse
Some rom's do support telstra, eg crc's 6.1.
You can "add" the telstra 3g bands manually however to any rom i believe, as I do, eg on tnt's rom I needed to add.
You then need to use the telstra proxy to access the sites etc(my place and such), BUT depending on what you want to do you may need to switch it on/off, very easy to do anyway.
Search for telstra 3g and you will find all info, otherwise use this: Telstra settings for 3g
--------------------------------------------------------------------------------
Hi all, been down the same road with 3g Telstra.
There is a fix to set up all settings etc fairly easy when flashing with wm6.
1. do your flash...
2. need to edit the bands to allow our phone to use Telstra's frequencys
(see below)
3. run Telstra's own setup cab that they use in the original imate ext_rom
4. just go into settings/phone/band...select "auto" on network type
select "GSM(900+1800)+UMTS(850)"
thats about it
Works for me everytime I've flashed, get wap when its out of range for 3g and get telstra internet 3g every other time
E=Edge average, 3g=Umts=H on connections
notes:
--------------------------------------------------------------------------
2. Telstra "odd" bands (must do some reg exports for next time, and to share), use a reg editor like resco's etc
--------------------------------------------------------------------------
(taken from XDA site) if anyone else needs them, This Registry patch works for the Hermes.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandT ype]
"ItemCount"=dword:00000006
"ItemName1"="Auto"
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemName4"="UMTS(2100+800)"
"ItemName5"="GSM(900+1800)+UMTS(2100+850)"
"ItemName6"="GSM(900+1800)+UMTS(850)"
"ItemValue1"=dword:00000000
"ItemValue2"=dword:00000001
"ItemValue3"=dword:00000002
"ItemValue4"=dword:00000003
"ItemValue5"=dword:00000004
"ItemValue6"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\UMTS\BandSelection]
"Band"=dword:00000005
You really just need to add ItemName5 and 6, and ItemValue5 and 6, and change the ItemCount from 4 to 6 (as you added two options) using your favorite Registry Editor.
Do a soft reboot of the phone. Now you can select the NextG option GSM(900+1800)+UMTS(850)
-------------------------------------------------------------------------
3. copy the telstra cab onto your phone then run, this sets up the Telstra Wap and Teletra Internet connection, as well as the proxy manager.
It does load some other junk onto the system like telstra bussiness etc , but this is easy to delete or move to another start menu group.
sometimes when setting up email accounts and such you may have to fiddle with the programmes "connect with " network setting and point it to :telstra internet or as in my case use "work" connection.
hope this helps
Fadge
Attached Files Telstra_V5.2.CAB (224.5 KB, 13 views)
you only need the reg fix (if not already enabled) then choose the band then load in the gprs/3g modem settings and the proxy.
that telstra cab loads a tsk and sets the home page to the old wap site, the proxy manager is kind of cute if you are too lazy to load the proxy back in although the only thing you need the proxy for is to use whereis and some of the other crap telstra services.
The proxy will just slow down msn and general internet use.
fadge said:
Some rom's do support telstra, eg crc's 6.1.
You can "add" the telstra 3g bands manually however to any rom i believe, as I do, eg on tnt's rom I needed to add.
You then need to use the telstra proxy to access the sites etc(my place and such), BUT depending on what you want to do you may need to switch it on/off, very easy to do anyway.
Search for telstra 3g and you will find all info, otherwise use this: Telstra settings for 3g
--------------------------------------------------------------------------------
Hi all, been down the same road with 3g Telstra.
There is a fix to set up all settings etc fairly easy when flashing with wm6.
1. do your flash...
2. need to edit the bands to allow our phone to use Telstra's frequencys
(see below)
3. run Telstra's own setup cab that they use in the original imate ext_rom
4. just go into settings/phone/band...select "auto" on network type
select "GSM(900+1800)+UMTS(850)"
thats about it
Works for me everytime I've flashed, get wap when its out of range for 3g and get telstra internet 3g every other time
E=Edge average, 3g=Umts=H on connections
notes:
--------------------------------------------------------------------------
2. Telstra "odd" bands (must do some reg exports for next time, and to share), use a reg editor like resco's etc
--------------------------------------------------------------------------
(taken from XDA site) if anyone else needs them, This Registry patch works for the Hermes.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\PhoneSetting\BandT ype]
"ItemCount"=dword:00000006
"ItemName1"="Auto"
"ItemName2"="GSM(900+1800)+UMTS(2100)"
"ItemName3"="GSM(1900+850)+UMTS(1900+850)"
"ItemName4"="UMTS(2100+800)"
"ItemName5"="GSM(900+1800)+UMTS(2100+850)"
"ItemName6"="GSM(900+1800)+UMTS(850)"
"ItemValue1"=dword:00000000
"ItemValue2"=dword:00000001
"ItemValue3"=dword:00000002
"ItemValue4"=dword:00000003
"ItemValue5"=dword:00000004
"ItemValue6"=dword:00000005
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\UMTS\BandSelection]
"Band"=dword:00000005
You really just need to add ItemName5 and 6, and ItemValue5 and 6, and change the ItemCount from 4 to 6 (as you added two options) using your favorite Registry Editor.
Do a soft reboot of the phone. Now you can select the NextG option GSM(900+1800)+UMTS(850)
-------------------------------------------------------------------------
3. copy the telstra cab onto your phone then run, this sets up the Telstra Wap and Teletra Internet connection, as well as the proxy manager.
It does load some other junk onto the system like telstra bussiness etc , but this is easy to delete or move to another start menu group.
sometimes when setting up email accounts and such you may have to fiddle with the programmes "connect with " network setting and point it to :telstra internet or as in my case use "work" connection.
hope this helps
Fadge
Attached Files Telstra_V5.2.CAB (224.5 KB, 13 views)
Click to expand...
Click to collapse
thought id attach the cab you mentioned...
RE:
hey guys, sorry I haven't replied until now, I've been fairly busy with work and the family.
OK Lets say I wanted to cook up a rom myself. Where can I find a clean wm6.1 rom and a kitchen to cook it in? I would have already probably cooked up a rom myself by now but it's hard to find a nice clean ROM and kitchen to use.
st3v3 said:
thought id attach the cab you mentioned...
Click to expand...
Click to collapse
What directory in the phone do you copy it to? Is it supposed to recognise it straight away or do you have to execute the file in the phone once you've copied it over??
manbarepig. XD rawr
Related
As I'm testing the different WM6 Roms I have to enter all the settings again and again and again. Now I'm thinking about creating a cab file with the operator and email account settings. But how to create it?
gerald_s said:
As I'm testing the different WM6 Roms I have to enter all the settings again and again and again. Now I'm thinking about creating a cab file with the operator and email account settings. But how to create it?
Click to expand...
Click to collapse
...look at this theme...
http://forum.xda-developers.com/showthread.php?t=299023
Regards,
Primoz
someone didnt take the time to search or RTFW
I saw the thread but not the cab file, sorry guys.
I would also like to know this...
CWW Enterprises Operator PDA Manager is great don't get me wrong, but by the time you install the software, download the operator lists etc, I can manually enter my own settings! and as I'm only interested in one network settings and one country, it would be far quicker & easier to have a cab file for the settings!
So, how can I create my own cab file?
so let me spoon feed you guys....
http://forum.xda-developers.com/showthread.php?t=299393
and when your done making your working cab add it to the wiki if its not already here
http://wiki.xda-developers.com/index.php?pagename=Hermes_provider_cabs
Hi all
I use a Trinity WM6 (bepe's rom) and I would like to use the WAP Portal of my Service Provider (Orange Switzerland). I can access the portal, but it's only a text based browsing. All WM5 Orange branded phones or Nokia phones can access the portal with picutres, nice colors and watch Live TV.
As my Trinity is not Orange branded (they don't even sell it here in Switzerland) I can't access the colored portal and can't watch TV
I tried changing some registry settings like:
HKEY_LOCAL_MACHINE\ Software\ Microsoft\ Windows\ CurrentVersion\ Internet Settings\ 5.0\ User Agent\Default -> Wert: Mozilla/4.0
and
HKEY_LOCAL_MACHINE\ Software\ Microsoft\ Windows\ CurrentVersion\ Internet Settings\ 5.0\ User Agent\Post Platform -> PPC; 240x320; SPV M3100; OpVer 12.16.5.111
As you can imagine, Orange ignores these settings and still recognizes, that I use a Trinity and not a SPV M3100 (HTC TyTN).
Does somebody knows, what I could do to "pretend" that I'm surfing on their WAP Portal with a SPV M3100?
Any help and hint is very appreciated!
Cheers
Jarvis
I <think> it is something to do with a special configuration file within the Orange ROMs. Updating the ROM removes this file, so preventing access to OW
There have been a lot of posts here and on Modaco about trying to access Orange World (the 'enhanced' WAP site), but I'm not sure if anyone found the fix.
NeilM said:
I <think> it is something to do with a special configuration file within the Orange ROMs. Updating the ROM removes this file, so preventing access to OW
There have been a lot of posts here and on Modaco about trying to access Orange World (the 'enhanced' WAP site), but I'm not sure if anyone found the fix.
Click to expand...
Click to collapse
Hi Neil
I don't know if this might be the reason. All Nokia and SE phones (unbranded) can access the enhanced wap portal. On an older WM5 version you could do the registry change and that worked out to access OW.
I've had better luck in
HKLM\Security\Internet Explorer\User Agent
The key to change is Custom
Try using some values from other similar devices on your network
OW
questsin said:
I've had better luck in
HKLM\Security\Internet Explorer\User Agent
The key to change is Custom
Try using some values from other similar devices on your network
Click to expand...
Click to collapse
Hi questin,
Thank you for this hint! After months of trial and error now it´s working.
Thanks again for your help.
Cheers
Jarvis
if I upgrade to Karmba_a_6.2_EN-18548, do I lose all my phones network settings?
Or will this just upgrade the OS and leave the orange network settings, and installed programs intact?
Sorry if this is a basic newbie question.
I have he original Orange rom that was kindly listed for backing out if needed, and I understand that my warrenty will be invalid if I brick it and can't back it out.
I love the look of the touchflo cube stuff and how much cooler the WM6 interface looks, and the reports of better performance under WM6, and apparently how Orange won't officially make an upgrade rom.
I just want to outdo my bosses new iPhone
skraggy_uk said:
if I upgrade to Karmba_a_6.2_EN-18548, do I lose all my phones network settings?
Or will this just upgrade the OS and leave the orange network settings, and installed programs intact?
Sorry if this is a basic newbie question.
I have he original Orange rom that was kindly listed for backing out if needed, and I understand that my warrenty will be invalid if I brick it and can't back it out.
I love the look of the touchflo cube stuff and how much cooler the WM6 interface looks, and the reports of better performance under WM6, and apparently how Orange won't officially make an upgrade rom.
I just want to outdo my bosses new iPhone
Click to expand...
Click to collapse
Yes it's a newbie question
If you flash any ROM you will loose EVERITHING
If you flash you will loose warranty
But you always can "downgrade" and get warranty again
trinityguides....
Thanks. I knew it had to be asked before.
Just finding where to start was the tricky part.
So much useful stuff from so many knowledgeable people.
have fun with your new toy
iphone....we don't use that word round here
Is there a backup solution that allows the operator settings to be backed up?
I installed SettingSaviour but I'm not sure exactley what itsaves?
Does Spritebackup do that?
skraggy_uk said:
Is there a backup solution that allows the operator settings to be backed up?
I installed SettingSaviour but I'm not sure exactley what itsaves?
Does Spritebackup do that?
Click to expand...
Click to collapse
Dont worry......Karmba has network wizard in his ROM, you can find it in start/settings/connection, so it will automatically detect your network & set everything for you......
That is even better.
Excellent news.
I guess I shall give it a go tonight.
The Auto detect network settings option found in WM6 Roms is "all well and good" but it does miss certain Orange UK customised settings so I would advise that you install this Orange UK Settings CAB v1.6. by rabdo . The file configures default orange custom settings to name but a few.
Description: -Installs Internet and MMS settings for Orange UK
-changes UMTS prefix to 3G when on 3G networks
-fixes voicemail icon
-fixes user agent ID (for orangeworld)
-changes regional settings to UK
-Black-IV-Shadow compliant!!! (contains sdkcerts)
-Adds Pocket IE shortcut to orangeworld
I shall add that to the list of things to add.
I've already backed up with SettingSaviour.
So I guess it is
Unlock
Flash
add the cab for the orange custom operator settings
re-install tomtom
restore the backup I have of data and settings.
I have installed Karmba into my D810, but the new rom unable to retrieve contact from my SIM. Now i force to copy all the Sim contacts to phones inorder to use it.
Any idea how to fix this ?
Show SIM contacts!
cason said:
I have installed Karmba into my D810, but the new rom unable to retrieve contact from my SIM. Now i force to copy all the Sim contacts to phones inorder to use it.
Any idea how to fix this ?
Click to expand...
Click to collapse
Edit your registry to change the ShowSim key in HKCU\ControlPanel\Phone to value: 1 (dword) for showing SIM contacts.
You can turn it off by changing the key to 0 (dword).
Well, it is flashed and running and my settings are back.
I had to reflash the radio rom back to a higher one, to get GPS back, but SettingSaviour/Pimbackup and the Orange settings cab did the job.
Still need to work out why Touchflo isn't so sensitive, but minor things.
tnyynt said:
Edit your registry to change the ShowSim key in HKCU\ControlPanel\Phone to value: 1 (dword) for showing SIM contacts.
You can turn it off by changing the key to 0 (dword).
Click to expand...
Click to collapse
Thanks for your useful information. But I already copied my SIM contacts to phone, now if i ShowSim the contacts will be duplicated.
Any way i can del all my phone contact ?
I unable to see "select all" in phone contact option.
Thanks again.
Please, can anyone help me create operator settings cab for T-Mobile HR network ?
All this time I had to manually create all my settings after flashing ROMs and it is a pain in the arse
I have extracted provmxl files with all the settings from the T-Mobile HR WM6 ROM, now I just need help with creating a cab file with it..
What files do I need for the cab and how do I initiate creation of the settings from provmxl files after installation ?
If anyone can tell me step by step how to create a cab or create a cab for me if it is easier then explaining, I have attacked the provmxls that needs to be edited a bit...
Thanks in advance!
Check Schaps. He has a cab listed that is a connections wizard that will detect and set up your phone...It works for AT&T so I would think it would for you....Look at his rom post and you should find it...
I know there is a connection wizard, but there are no Croatian networks present, so it will not work for me
The only way for me is to create provmxl file with all the settings that can be then used with network connection wizard. The provmxl files are here, they just need to be edited a bit since there is some crap in there that has nothing to do with operator settings..
I would like if someone could help me create cab file with settings for just my network since I don`t want/need other network settings and they will just use my storage space for no reason..
Hey Shamanix, i see what you're trying to do and sorry i can't help. But would it not be more beneficial for you (and everyone) to send these settings over to Schap and have him integrate them INTO the connection wizard? This way they are there for future users in one easy spot.
I upgrade my rom to the latest 1.93.xxxx, now when i go to settings, on the personal tab, phone, then on the band tab, "select your GSM/UMTS band" there's only one option "UMTS(900+2100) + GSM (900+1800)" before today, I have like 6,7 other option, e.g "UMTS 800+2100" etc, how can i retrieve those setting, what have i done wrong.
Thank you very much in advance
please use .reg file form the following post:
http://forum.xda-developers.com/showpost.php?p=2443312&postcount=104
-----------------
can somenone please add this procedure to WIKI perhaps, please?
There are more and more forum members keep asking same question again and again.
Also, it might be worth including in Diamond Tweaks?
thankx but looking seems like a bit different, can someone have their diamond upgraded to the latest version extract the folder and post up here please, many thankx
"HKLM\software\oem\phonesetting\bandtype"
you need to import this settings. obviously you have few bits missing here and there.
i have PHM editor but the import function is grey out? i tried just run the .reg file but doesn't work like windows
don't wanna manually type all those in, any advice?