Related
I have an Evo on Boost now for 2 months rooted with no problems at all. I change roms all the time, update kernels, put themes and never any problems. Yesterday there was a post to update the pri to version 1.40.
I did it and it said something about resetting the phone. It shut down and ever since then I have no 3g at all. The only way I can surf the net or go to the market place is through my wireless internet in my home. I can send/receive texts/mms/phone calls but no internet.
Also, it constantly come up with an error 67 data call failed.
Thanks guys in advance
You could try updating profile under settings and system update.. let me know if this worked.. my 3g wasnt working went to sprint and did the update and is back on..
sent from my Evo
##3282#
edit mode
enter msl code
data profile
menu
restore
this will reset ALL data profile information on your phone. it will then reboot and reload all said information by re-provisioning your phone.
if you do not know your msl, call sprint tech support and ask nicely for it. they will usually give it to you. if not, hang up and call back. or just tell them you have no data and want to re-provision your phone and they will walk you through what i just did.
as a side note, sometimes this error pops up, for no good reason and goes away after a while. my guess is in your situation this isn't the case. you had a hiccup that's easily fixed.
carguy4471 said:
##3282#
edit mode
enter msl code
data profile
menu
restore
this will reset ALL data profile information on your phone. it will then reboot and reload all said information by re-provisioning your phone.
if you do not know your msl, call sprint tech support and ask nicely for it. they will usually give it to you. if not, hang up and call back. or just tell them you have no data and want to re-provision your phone and they will walk you through what i just did.
as a side note, sometimes this error pops up, for no good reason and goes away after a while. my guess is in your situation this isn't the case. you had a hiccup that's easily fixed.
Click to expand...
Click to collapse
Thank you for trying to help I really do appreciate it, but I don't have a sprint account I am on Boost Mobile and have been for 2 months now without any issues but this one
Could be a PRL problem? I don't know anything about getting an EVO on Boost, but I assume part of the process was downloading a PRL for Boost to connect to their towers?
Go back to the guide you followed and redo the steps.
joey72 said:
Thank you for trying to help I really do appreciate it, but I don't have a sprint account I am on Boost Mobile and have been for 2 months now without any issues but this one
Click to expand...
Click to collapse
this will still work on your phone. contact boost to get your msl. or use CDMA workshop. there is a thread in the dev section on using CDMA workshop.
carguy4471 said:
this will still work on your phone. contact boost to get your msl. or use CDMA workshop. there is a thread in the dev section on using CDMA workshop.
Click to expand...
Click to collapse
What exactly will work on my phone?? and what should I do in CDMA Workshop? I have the program and I do know my MSL, so if you can explain what I should do to get back my data connection that would be great!
I tried to update the PRI and wiped my data profile for boost mobile and now without wifi on, I get error 67 data call failed
By the way, Thank you for trying to help, you guys are the best
No offense, but it really should not be that difficult if you set this up before!! I assume that you in fact did not set your EVO up on Boost, but gave it to someone else to set up, correct?
Simply refer to the original guide, or steps you took yourself to set the phone up on Boost in the first place - or give it back to the person that did it and let them fix it.
nukedukem said:
No offense, but it really should not be that difficult if you set this up before!! I assume that you in fact did not set your EVO up on Boost, but gave it to someone else to set up, correct?
Simply refer to the original guide, or steps you took yourself to set the phone up on Boost in the first place - or give it back to the person that did it and let them fix it.
Click to expand...
Click to collapse
Hey Nukedukem,
No offense taken, however you might want to check your panties to see if you're getting your period. I thought this was a forum for people to help other people "do it themselves". If I, and everyone else did what you suggested, you'd be outside sitting on the curb with nothing to do. So if you have nothing nice to suggest, then I suggest you pass over my post and go "not help" someone else. Thanks
To everyone else: yes the guy that first did my phone is no longer to be found so if you have any suggestions I would greatly appreciate them. Also, if a programmer can help I'm more than willing to donate.
Thanks again guys
The error 67 I think may be caused by the network rejecting your phones credentials, I had this same problem last night. The only way I could fix it was to restore a nandroid backup and then have it update my profile and PRL. You may be able to get away with just restoring the backup though, trying to update anything is most likely not a good idea since you are using a network other then what the software was written for.
joey72 said:
Hey Nukedukem,
No offense taken, however you might want to check your panties to see if you're getting your period.
Click to expand...
Click to collapse
Sorry you took offense, but you are in WAY over your head. If you want help from a developer, you need to SEARCH FIRST.
WWW.GOOGLE.COM
Since I'm such a nice guy, I searched for you...30 seconds later I learned how to port my EVO to Boost Mobile.
http://cellphoneforums.net/boost-mobile/t307946-how-get-sprint-phones-boostmobile-cdma.html
Oh, and uh...try not to choke on my menorrhagia.
That method did work MONTHS ago but not now that SPRINT changed up their website your not allowed to do esn swaps anymore. I was able to do it months ago with my touch pro2 and i have an EVO now and just tried to reprogram my phone cause i had the msl code and input my boost number and msid like i did before with the touch pro2. It reseted but when i went to make a call it said account cannot be validated so had to get sprint service again. Soon as someone comes out with a VALID way of getting the EVO working on boost Im going back to them.
Tech360 said:
That method did work MONTHS ago but not now that SPRINT changed up their website your not allowed to do esn swaps anymore. I was able to do it months ago with my touch pro2 and i have an EVO now and just tried to reprogram my phone cause i had the msl code and input my boost number and msid like i did before with the touch pro2. It reseted but when i went to make a call it said account cannot be validated so had to get sprint service again. Soon as someone comes out with a VALID way of getting the EVO working on boost Im going back to them.
Click to expand...
Click to collapse
did u fix the problem?
it's because you have a sprint 1.4 pri and need a modified boost pri...until that is changed, no 3g for you, but seriously, there is an app that gives you your MSL code
i unlocked my play today. it works for calls and messages, but that it. only time i can get web access or market access is w/ wifi. any help please. and any new free ways to unlock bootloader? thank u guys very much fo ur time...
Still paid to unlock. By the way, that site has a bad reputation
jacklebott said:
Still paid to unlock. By the way, that site has a bad reputation
Click to expand...
Click to collapse
set up your apn
Sent from my R800i using Tapatalk
fma965 said:
set up your apn
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
Huh? What do you mean
jacklebott said:
Huh? What do you mean
Click to expand...
Click to collapse
set up your apn aka the data network settings.
Sent from my R800i using Tapatalk
fma965 said:
set up your apn aka the data network settings.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
I never said I had any apn problems though. I was simply responding to the OP's question
nick315ny said:
i unlocked my play today. it works for calls and messages, but that it. only time i can get web access or market access is w/ wifi. any help please. and any new free ways to unlock bootloader? thank u guys very much fo ur time...
Click to expand...
Click to collapse
He means to manually set up your APN settings. Also a good program to have it APN Backup & Restore. Really good to do before installing roms or anything major, like unlocking your phone. Just in case something messes up.
thanks guys. whats a trusted bootloader unlock company?
Contact Jinx13 on these forums.
http://forum.xda-developers.com/member.php?u=4002805
[email protected]
$24 for remote unlocking and sim unlocking at the same time
is there anyway around the locked bootloader on the r800 at. its the att ver. and i want to have it fully t mobile functional. im new to this but picking up quick. i got a g1 i started doing this with. but now i upgraded. i think????
Theres no way to get around it per say.
contact the person I mentioned, Jinx13, he can answer your questions.
Masters2150 said:
Contact Jinx13 on these forums.
http://forum.xda-developers.com/member.php?u=4002805
[email protected]
$24 for remote unlocking and sim unlocking at the same time
Click to expand...
Click to collapse
nick315ny said:
i unlocked my play today. it works for calls and messages, but that it. only time i can get web access or market access is w/ wifi. any help please. and any new free ways to unlock bootloader? thank u guys very much fo ur time...
Click to expand...
Click to collapse
OP, dont buy another code as Master suggested, this will make you waste more money
Your phone is unlocked fully but you just have to set up your APN (Access point name) which is your phones way of accessing a carrier's DATA/MMS
Go to your SETTINGS > mobile SETTINGS > APN (Access Point Names)
Go to Google, then look up your NEW carriers APN settings (IE. T-mobile APN settings)
Go back to your phone in the APN menu and click NEW APN (you gotta find a menu button on that screen)
Then fill in the APN form list EXACTLY as shown on google
save your newly typed settings and select it in the list
That should be it.
I had many positive experiences with cellunlocker.net myself as well as with my friends, but I can see that I had to step in to help you out here as a lot of false information was going on
Good luck
Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
ankurcshah said:
I guess i went into ##DATA# and messed something without my knowledge.
Click to expand...
Click to collapse
You "guess" you messed around with something???
Call Sprint
Sent From My Galaxy10. 1 Class Starship...
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Flashing stock ROM wont reset those settings. You will need to reset the activation on a stock ROM. I'm not sure of the code for that but its been in the treads a few times....
Which would be ##786#.....
Still no avail brother!
ankurcshah said:
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Click to expand...
Click to collapse
Is this device compatible with the 3g service your provider uses?
Yes it is. I have been using for quite a some time now.
Having the exact same issue. Not sure what caused it or how to fix it. I too am on stock rom
ankurcshah said:
Yes it is. I have been using for quite a some time now.
Click to expand...
Click to collapse
Have you contacted your cellular provider? If you changed some settings, most likely calling your provider to get the right settings will be your best course of action.
Sent From My Galaxy10. 1 Class Starship...
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Any help?
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
brooksyx said:
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
ankurcshah said:
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Click to expand...
Click to collapse
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
ankurcshah said:
Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
Click to expand...
Click to collapse
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Questions:
1. If not how did you get it setup to see their towers???
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
3. If they did, do you still have them and have you tried that???
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
Sent From My Galaxy10. 1 Class Starship...
SouthPhilly said:
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
Yes,currently on el29 one click. but stock kernel without cwm
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
Could you link me?
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Nope, I just needed the dump file for the 3g to work, 3g works on my dad's phone and it doesnt on mine. I use the same dump as his. Still? Wierd
Questions:
1. If not how did you get it setup to see their towers???
I just flashed a prl
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
nope, I had set the msl to 000000
3. If they did, do you still have them and have you tried that???
They are not aware of such a thing also.
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
I tired they don't understand "reprovision radios"
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
ankurcshah said:
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
Click to expand...
Click to collapse
The reset I mentioned is a "factory reset" ... But like I already posted... It will only delete all of your user data and reset settings like wifi, email passwords...
It won't reset the radios...
If you had already flashed these files to get your phone working when you got it, Don't you still have them???
Sent From My Galaxy Class Star Fighter...
My 2 cents here, not completely sure but I saw this today.
Know your msl
>go to phone enter ##data#
>Click edit
>Then enter msl
>click other
>go into Korea mode
>click on India mode, press okay.
>reboot
Sent from my SPH-D710 using Tapatalk 2
Tried out! No changes takes place. Gonna take the qcn of a friends write it onto my phone,change imsi,meid,mdn and check.
Sent from my SPH-D710 using Tapatalk 2
Were u mentioning the one click thingys? Yes i have tried out every damn thing now.
Now on ics still no 3G
Sent from my SPH-D710 using Tapatalk 2
The one click restore files are for Sprint phones so I doubt if they would work for you
Hmmm,all right
Sent from my SPH-D710 using Tapatalk 2
When add settings of my carrier in DFS (cdmatool), it is not saves them. Who can help what can it be. Or it is just need to enter right APN settings? I'm new in this. Sorry for bad English. May be some one know what I'm doing wrong. Please give me advice.
Solution:
- as it turns out you need to put zeros in line 39939 (NV Items -> 39939 | NV_LG_DATA_PPP_CARRIER_I | User | - - | 1 | 2byte), than do everything like described in DFS. Also 3G Rev B works well (DFS -> tab Data -> mode -> RevB_MFPA)
:victory:
Re: [Q] Can't make 3G work on another carrier (unlocked by DFS)
ysabxe said:
When add settings of my carrier in DFS (cdmatool), it is not saves them. Who can help what can it be. Or it is just need to enter right APN settings? I'm new in this. Sorry for bad English. May be some one know what I'm doing wrong. Please give me advice.
Click to expand...
Click to collapse
Where are you located?
Sent from my Nexus 7 using XDA Premium HD app
Enzopreme said:
Where are you located?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I live in Europe, can you tell do I need to flash PRL for my operator?
ysabxe said:
I live in Europe, can you tell do I need to flash PRL for my operator?
Click to expand...
Click to collapse
I never used DFS.. But from what I remember from way back..
After adding the ESN to your carrier
I would flash the prl and activate the phone...
If the Internet wouldn't work... Then I would need to manually enter the APN settings.
Never did and LTE phones though..
keydel said:
I never used DFS.. But from what I remember from way back..
After adding the ESN to your carrier
I would flash the prl and activate the phone...
If the Internet wouldn't work... Then I would need to manually enter the APN settings.
Never did and LTE phones though..
Click to expand...
Click to collapse
Thanks, I'll try
ysabxe said:
Thanks, I'll try
Click to expand...
Click to collapse
I'm afraid that won't work either. The phones EFS won't let the manual write stick and I can't figure out why either. I've been trying since I've had the phone. I have mine flashed to Verizon but only 1X. I was looking at the thread on backing up this phones EFS to you computer and was wondering if I could be backed-up and changed while on a PC then copied over the existing EFS. I don't have time to try it right now so if anyone else does give it a "go" and let the rest of us know if it works.
devo3d said:
I'm afraid that won't work either. The phones EFS won't let the manual write stick and I can't figure out why either. I've been trying since I've had the phone. I have mine flashed to Verizon but only 1X. I was looking at the thread on backing up this phones EFS to you computer and was wondering if I could be backed-up and changed while on a PC then copied over the existing EFS. I don't have time to try it right now so if anyone else does give it a "go" and let the rest of us know if it works.
Click to expand...
Click to collapse
I can tell that it is possible! My phone work in 3G! But I payed for config it! When I understand how they config it I will post here!!!
ysabxe said:
I can tell that it is possible! My phone work in 3G! But I payed for config it! When I understand how they config it I will post here!!!
Click to expand...
Click to collapse
Congrats!! You are the only person I have heard of that has been able to flash to another carrier and get full speed 3D. May I ask who did it and what it cost? (PM me) Also, what do you mean by "config" exactly?
devo3d said:
Congrats!! You are the only person I have heard of that has been able to flash to another carrier and get full speed 3D. May I ask who did it and what it cost? (PM me) Also, what do you mean by "config" exactly?
Click to expand...
Click to collapse
I mean configure it... in dollars it would be 25$ (I am in Europe) :cyclops: but everything flies))) ok I will PM you.
ysabxe said:
I mean configure it... in dollars it would be 25$ (I am in Europe) :cyclops: but everything flies))) ok I will PM you.[/QUOT
I hope you are able to figure out how they did it soon because I can't stand having a [email protected]#$$$ paper-weight. LOL. By the way, after I flashed mine, one of the main bugs is the "hands free activation" notice that pops up every time it gets turned on or up from sleep mode. Is there a way to delete the file that controls this or at least permanently turn it off?
Click to expand...
Click to collapse
devo3d said:
By the way, after I flashed mine, one of the main bugs is the "hands free activation" notice that pops up every time it gets turned on or up from sleep mode. Is there a way to delete the file that controls this or at least permanently turn it off?
Click to expand...
Click to collapse
The hands free activation is an app that runs automatically at startup. You can remove it from /system/app/OmaDmclient.apk or uninstall "Update Device" with Titanium Backup.
Sprint likes to change up the app in its devices, but it seems to have the common thread of "omadm" in the apk name.
Hope that helps.
SOLVED
Hey everyone and thanks for taking the time to read this,
So the story goes as so: After doing some research couple months ago about the capability of the Verizon Galaxy S3 to work on T-mobile, i purchased it, and got it to successfully work on T-mobile(texts, calls, wi-fi). The problem is, i just recently upgraded to include a data plan, and i cannot access the internet, despite taking my phone to my cell phone dealer and contacting T-mobile.T-mobile even sent me a guide to do a mastery reset to factory in hopes to solve this problem, only to tell me afterwards that the phone version SCH-I535 is a "verizon locked-software" and i won't be able to set up an APN to work on the T-mobile network. This was all due to the fact that i was not able to set up a APN for T-mobile, and every time i tried to access it through setting, it brought me to a blank black page with the only option of "Reset to Default". After reading other forums and talking with some people, many have suggested i take this issue to XDA to find a solution.
So, here i am.....Does anyone know if it is possible for me to break/root/ or whatever it is called so i can successfully access the t-mobile network on my phone? Preferably an easier guide since i am sort of a newbie at this sort of stuff.
Thanks again for reading.
Before your Contract change, you were able to receive and make calls successfully with T-Mo Sim right ? Even now you can make calls too correct ? The reason I am asking this is to be able to check if you are really unlocked off of VZW. If you are not unlocked, then that would be the first step.
You are right, the APNs do drive Data Connection. If the stock firmware does not allow you to change APNs then you will have to root. Please post a screen of your Settings > About phone that shows your Rom Version, Baseband and Kernel.
Perseus71 said:
Before your Contract change, you were able to receive and make calls successfully with T-Mo Sim right ? Even now you can make calls too correct ? The reason I am asking this is to be able to check if you are really unlocked off of VZW. If you are not unlocked, then that would be the first step.
You are right, the APNs do drive Data Connection. If the stock firmware does not allow you to change APNs then you will have to root. Please post a screen of your Settings > About phone that shows your Rom Version, Baseband and Kernel.
Click to expand...
Click to collapse
Hey Perseus, thanks a lot for taking the time to reply. I bought the phone in the summer off someone who had verizon. I have always had T-mobile, and considering this phone is GSM, i decided to buy it because it would probably work for T-mobile. I had the phone unlocked, and i am currently using it to make calls, texts, and even use wi-fi with no problem. The only problem at this time is that i recently added a data plan which i cannot currently use. Here is a screen shot of what you have requested.
Thanks again
First try
Settings > More > Mobile Networks > Preferred Network Type.See what it is set to. Change it to LTE/GSM/WCDMA if needed. See the other option System Select as well.
Also separately try the following.
Hit ##DATA# in the Dialer. In the subsequent Menu choose EDIT > OTHERS > LTE APN
If all fails, please Root the phone and then try. The way you go about is
1. Flash a Custom Recovery via Odin. Make sure the version of Custom recovery is for your model D2VZW not D2TMO.
2. Flash a SuperSU zip file via Recovery and then hit fix permissions in the recovery.
Try the APN Settings after that. IF you can actually access them, then set them according to this link.
If all the above fails, I'd suggest a custom Rom for d2VZW.
You will never get 4g trust me I had one... you will just get the E
Sent from my SGH-T999L using xda app-developers app
Ok, so i tried to changed it to LTE and i got no service at all, so i switched it back to Global. I also tried the dialer thing several times, and got the " connection problem or invalid MMI code"
So i guess i am going to have to root the phone? Does anyone know a good video tutorial or written tutorial on how to safely do this? Also, what exactly is rooting?
HackThisThing said:
Ok, so i tried to changed it to LTE and i got no service at all, so i switched it back to Global. I also tried the dialer thing several times, and got the " connection problem or invalid MMI code"
So i guess i am going to have to root the phone? Does anyone know a good video tutorial or written tutorial on how to safely do this? Also, what exactly is rooting?
Click to expand...
Click to collapse
You have to enable the mmi codes to use them. Anyway as stated above your reply you will never get 3g or 4g just edge (seen it personally) which is pretty darn slow.. Not worth it if you ask me and be paying for data.. If you still want to root it and keep trying to add sons check the Verizon forums.. They could probably help you a lot more than on this side of the forums
Sent from my SGH-M919 using Tapatalk
Guys, he is not getting ANY data signal at all. His problem isn't getting the specific icon but being not able to change APNs.
@HackThisThing, you are better off following up on Verizon Device forum. That forum does have a video tutorial for Rooting. Here's forum link.
I don't think you will be able to change APNs without rooting. I checked with a buddy of mine who has the same device as you.
Here's a good answer to What is Rooting ?
Even if you CAN fix it, why bother if you can only get 2G? I'd sell it or trade it for a phone that's more compatible with T-Mobile 's network instead of paying for data and only getting dial-up speeds. I get that solving problems is fun, but OP do you want to live with only 2G?
Sent from my SGH-T999 using Tapatalk
I don't agree with that assessment. Just like the T999L phone, this device will work on LTE Bands just fine. OP just needs to wait for LTE to be rolled out in their area. There's a coverage map and roll out schedule on T-Mo website and the T-Mo News blog.
It's worth a look, but could still leave them with patchy coverage. If it's going to be a while, why wait when it's not hard to just trade the phone? I guess I don't see a reason why hold out on getting a Verizon phone to work when you could just get one that works now with little to no monetary loss. It's just a Verizon S3, not really something worth "waiting" for when they could get the same thing but more functional on their network of choice.
They made an honest mistake and waiting might give them "good enough" service - but other than that they're stuck with dial up speed only and risk bricking a phone they could just trade or sell now.
Maybe I'm just impatient and risk averse.
Sent from my SGH-T999 using Tapatalk
OP has already purchased this VZW version.
Same Problem...
I have the same problem....
How to get any type of data...?