[Q] HTC Desire how to create gold card without phone? - Desire General

I attempted to manually update to Froyo on a rooted (came to me that way) HTC Desire.
I used the manual method described at geekword.net (google for it, I can't post links)
Unfortunately, I didn't know I was meant to use a gold card for the update.
So what I ended up with is a failed Froyo update, after the post-update reboot, the progress count will never get to 100%, as the phone goes into a reboot loop.
This wouldn't be an issue if I could reattempt the update with a gold card - unfortunately, in its current state the phone can't even see the sd card for whatever reason - the card isn't corrupt as I can continue to run the update.zip file from it - not that it helps.
With the phone connected to the PC, I don't have option to mount as disk drive. I can get the CID using Klutsh's Gold Card tool, but because I can't mount the phone, I can't copy the gold card image over.
Is there anyway to get the image over to the sd card and complete the gold card creation without going via the phone?

I dont really know for sure what the answer is to your problem mate but in the hope of getting this thread started I would be looking to download the original branded ROM and restore it through the bootloader menu so that you can start over. This may or may not work but its what I would be researching first.

When i made my gold card, i had the MicroSD in the phone to get the CID, but then i wrote the image to it using a MircoSD-to-SD adapter, just using the built in SD card reader on my laptop. Hope this helps.
JP

jamesmcuk > I tried a stock Telstra rom (this is an Aus phone) found online, it came back with something along the lines of 'wrong bootloader version'. I have a feeling that bootloader for the phone was upgraded either during the first root (by the previous owner) or upgraded when I updated to Froyo.
Are there any official rollback methods for failed Froyo updates?
JPDyno > Could you please outline the procedure used to copy the image over to the micro SD? I have a goldcard.img file from the procedure that I've performed to date. Do I copy the img file over using a imageburner? Do I need to partition the sd card or anything? Kinda lost as to the steps since I thought the Klutsh tool would take care of the copying for me - but it needed connection to the phone.
Thank you both for your replies, hopefully I don't have a fancy brick on my hands

Your phone should have come with a MicroSD card adapter, which looks like a normal sized SD Card, with a slot at the back to insert your microSD into. So you take out your MicroSD card from the phone, slide it into the small slot on the adapter, and slide the adapter into your SD Card reader slot on your laptop/desktop. If you dont have an SD Card reader slot you'll need to get a USB SD or microSD card reader. Once you plug it in it'll automatically detect the card as a disk drive in My Computer. Then you can follow the steps in the Goldcard Guide (install and run the Hex Editor...open the disk drive and the img in the Hex editor and copy stuff over...yada yada...)

Just out of interest does it still do a constant reboot if you remove either or both the SIM and the SD Card.
Also I found this guide for restoring the Nexus 1 which being so similar should contain some good info although you will need to find the ROM for the desire rather than the ones they post.
http://forum.xda-developers.com/showthread.php?t=614850

Yay, got it working!
Thanks for the prompt replies guys.
I followed the suggestions here (in using the sd card reader on my laptop), and used the steps starting with HxD from:
android.modaco.com/content/general-discussion/305672/creating-a-goldcard
I managed to get a goldcard, and successfully updated to froyo!
p.s. the phone reboots even without a sim card - never tried without the sd card though - I needed it since the update.zip was from the sd.
Now onto exploring Froyo!

For all of those still wishing to make a goldcard sans phone, you can also find it here
http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/

Get CID
At first I could not get the CID as well. The problem was, that I was in Fastboot mode. After changing into Recovery mode, I was able to use "adb shell" and then cat /sys/class/mmc_host/mmc1/mmc1:*/cid to get my CID.
So now you can start to make your own Goldcard.

Related

Flashing via SD card assistance

I've got a Tilt 2 with hard spl and can flash from my desktop no problem. I'd like to get the flashing via SD card going, but it's hanging.
I've got the nbh file copied to the root of my SD card, get the phone into bootloader, but I see a message flash up about no image. It's very quick though and then the phone hangs in the bootloader. A soft reset fixes it and the phone boots up.
I'm clearly missing something and can't figure out for the life of me what it is.
The image file is named correctly. It was copied to the phone through WMDC to the SD card. Should I put the phone into disk mode a copy the image over?
The SD card is formated in Fat 32.
Any thoughts/Advise?
Thanks.
maybe..
i had this issue before - check your .nbh file with total commander, or put it in your pc and check it. if you name it .nbh with the wm file explorer, it actually ends up RHODIMG.nbh.nbh - solution is just to remove one .nbh!
:::Whimper:::
I'm having this exact same problem!
My RHODIMG file is named correctly and in the root directory (there is nothing else on the SD card either), but I get that same EXTREMELY BRIEF message about no IMG file and then it hangs at the bootloader screen with 'Serial' in the white box on the bottom.
I've even tried using Mobile Flasher, but nothing is working. I
What am I missing??? I've tried it many times already, formatted my card a few times and loaded the RHODIMG file again, but nothing! My Rhodium will NOT connect via USB anymore, so I need to flash via SD card.
Help!
Debbie
I actually don't even rename the file, it's already got that name from the rom. It's e2 manilla 2.5 rom.
I'll try and transfer the file to the card when the phone in disk mode and see if that makes a difference...
O-M-G(!), this is *so* freakin' wacky!!!
I just switched SD cards to one that was larger (8GB rather than the 2GB), that had tons of stuff on it, then copied the RHODIMG file in the root, and then ran 'enablerapinew.cab' again, just for the hell of it...
Damned device found the RHODIMG file there from the bootloader and the update ran as expected, but not on the 2GB card with nothing else on it! WTH?!
Device says that the update is complete, so I'm booting up now and will do a few resets and then perform the tedious task of setting up my Tilt 2, etc.
Don't know whether the cab (thought I only had to run this once when Hard SPLing?) or the different card was what caused it to work, but I hope this helps someone else with the same problem. Whew!
Debbie
...Who's back in business!
SOLVED!
I don't know what caused the magic, but I was able to flash from SD card... FINALLY!
Here's what I did: Flashing Via SD Card Assistance
Hope this helps others!
Debbie
No, this did not work for me. I tried installing the cab again, but no luck, just passes on by saying no image.
Delete image off sd card, reformat FAT32 and copy image back on... I have had this problem myself, it seems that when the .nbh file copies it doesn't register on the card properly or something. Either deleting the file then re-copying seems to work but I still like to reformat too..... DON'T just copy over the top of the image file... THIS DOESN'T WORK... leads to a lot of hair pulling frustration...
Cheers...
So I tried a reformat of the card, just a quick one, not full. Still didn't work. I downloaded another image to try out, the lastest Energy rom, to flash on a completely blank card. That didn't work.
So, I went and got an older card, 8 gig, that is currently being used in a camera. The one I use now is a 16 gig card. This one worked fine.
Conclusions being perhaps a 16 gig card won't work for flashing?
brands
i have heard of certain brands having sizes that didn't work for flashing, for whatever reason. It was a long time ago on my kaiser, so i don't remember which it was, but kingston 2gb comes to mind. like i said, don't know if that is accurate, but there definitely were some that just wouldn't work. perhaps a different brand 16gb?
Well, I used the other memory stick, a Scandisk and this worked fine. Must be something with the 16 gig Kingston disk as it just will not work.

Can't get past HTC Start up screen.

Hi,
I had DJ Droid installed on my desire and I was trying to unroot it and put a stock 2.1 rom on so I could put Froyo OTA once it was released but I didn't get very far!
I formatted my spare card sd card and wanted to make a new gold card as out of the two I used I wasn't sure which was the gold card.
Whenever I turn on my phone it hangs on the HTC start up screen.
I can hold power and volume down and get into HBOOT, go to recovery, volume up and get to Android system recovery <2e>
Apply update.zip and it says No Such File even though I put it on but I may of wiped the partition during all this which has removed this file.
When I try to mount the micro sd using an adapter and look at the files on it it says 'You need to format the disk in drive G:before you can use it.
This happens for both cards. I try to format them but they both fail
Anybody ideas apart from leave things how they are in future!
Cheers
hmm, try to use the windows drive manager to fully remove the partition on the sd card. then create a new partition, reformat and! be sure to select the PHYSICAL DRIVE (without a letter) when editing the sd-card and making the goldcard.
it looks like you edited the volume header and the partition table is corrupted too.
if this is not helping maybe the sdcard is broken indeed, but I seriously doubt two sdcards failing at the same time
greets,
messy
Managed to format the card and put the update and djdroid files on the card and start again.
I must not be doing the wipe incorrectly at times, also the boot took a lot longer to load compared to when it was working fine so it might of been me thinking it had froze on the htc screen when in fact it was working, sorry!
All sorted now and I have put OpenDesire to see what that is like.
Thanks for the help.

Help! SD card in Read only Mode!

I tried installing the nfl unlocker 64 file by changing the zip to apk and attmepting to install it. Well it didn't work and right afterward I got an ! mark and it said card in read mode only. So I cannot delete, edit...files etc on the sd card. I am at work. No way to connect it to the pc to back up the sd card to try reformatting it, does anyone know any other ways to get this read mode off? I do have terminal emulator installed.
TIA
Yep this has happened thrice to me. Others have experienced this also after froyo.
One or two have stated trying to fix the card error using windows scan disk (if you have access to a pc) fixed the error. I have had success by copying the card image file, inserting the card into a card reader on the ltop, formatting the card there, then restoring the backed up image.
Aa stated this happened to me more than once. Has not happened in a few weeks.
----
Sent wirelessly via PC36100.
is that using the command chkdisk F ??
Also...hwo do you save the image file?

[Q] Installed nexus rom on desire, now its not working

Hello all.
I am stupid I know. But I installed the evil nxsense HD v.0.9 on my HTC desire, didn't know it was for nexus.
So now my phone is *Edit*, I can only enter the Hboot and recovery menu, but cant restore my backup. I can also mount to usb so I can connect it to my computer.
Is there any hope, and what can i do?????
Drmalle
Boot into fastboot and flash an oficial ruu...u will need to re-root after that.
Thanks cris you just gave me hope
How will I know which ruuu rom to use, I google it, and found ALOT.
forum.xda-developers.com/showthread.php?t=695667[/url]
found some here, any of them?
Does anyone know where to get the official htc desire ruu rom in zip. I can only find RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00.32U_5.09.00.20_release_140022_signed, and that can only work if your phone is alive..
I need the rom you can flash in recovery???
Drmalle
Boot into fastboot on phone. Run ruu on windows (with phone attached to USB)
OR
Download this:
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.zip
Rename it PB99IMG and copy it to your sd card. Then just boot the phone into HBOOT (turn on whilst holding volume down) and follow the instructions
I ran the RUU_Bravo_Froyo_HTC_WWE in windows, and now the phone works.
So thank you everybody who helped.
BUT it cant find the sd card now, it says insert sd card. how do i fix that?
Drmalle
Take it out of the phone, format it in Windows (assuming you have a card reader and a micro to SD card adapter), put it back in phone and see if it works.
If not, it may be corrupt
Well i don't have that, can i just buy a new one and insert? or is there and other way.
Buying a new one is the quick way, but then again you could just buy/borrow a micro sd to sd adapter and use a PC with a card reader in it...
Ok thanks, im on my to my Friend
Who has a card reader, so hope it will work
Sent from my HTC Desire using XDA App

[Q] Finally reached a problem I cannot fix on my own, please help

So my phone and computer will not detect my sd card after I dropped my phone.
Here is everything I have tried:
hard reset
sdhc micro adapter for my computer
pulling out sd card and reinserting
pulling battery and letting sit for awhile and plugging battery back in
I followed the sd card and usb fix issue found in the forums, but everytime I install the jdk the sdk installer says it is not found.
I know if I am able to format the card somehow it will fix it i think. but I cannot get anything to recognize it, or if I can figure out what single driver is missing on my phone I can figure the rest out from there.
The sdhc adapter works with the new micro it came with but not mine.
I am still able to use my phone but I obviously cant do **** without the sd card.
I have a recent backup of my sd card on my computer I just need a way to get it to my sd card and I am stumped.
Thanks for your help guys
Is there a way to force my comp to read the sd card?
Update
One thing I was just able to do was to take the micro sd that came with my adapter and my phone reads it just fine. However it is only a 2 gb. Like I said, I have a back up on my computer of everything that was on my sd card at one point. Being that my phone can read sd cards, does this help at all with somehow fixing my factory one?
Since I am now able to get into rom manager and my phone recognizes some sort of sd card. Would flashing some sort of sense ROM allow me to put my original sd card in and format it?
If all you want to do is repartition and/or reformat it, boot into recovery and do it there. While in recovery, especially is your recovery is amonRA v2.3, select the "MS-USB" option and serif your computer detects it while you're connected via USB.
Posting & Replying from my EVO 4G
dougjamal said:
If all you want to do is repartition and/or reformat it, boot into recovery and do it there. While in recovery, especially is your recovery is amonRA v2.3, select the "MS-USB" option and serif your computer detects it while you're connected via USB.
Posting & Replying from my EVO 4G
Click to expand...
Click to collapse
I am currently using clockwork. I tried the mount unmount options in recovery mode. I have never really tried amon-ra for anything but now might be the time to give it shot.

Categories

Resources