Hi,
I had DJ Droid installed on my desire and I was trying to unroot it and put a stock 2.1 rom on so I could put Froyo OTA once it was released but I didn't get very far!
I formatted my spare card sd card and wanted to make a new gold card as out of the two I used I wasn't sure which was the gold card.
Whenever I turn on my phone it hangs on the HTC start up screen.
I can hold power and volume down and get into HBOOT, go to recovery, volume up and get to Android system recovery <2e>
Apply update.zip and it says No Such File even though I put it on but I may of wiped the partition during all this which has removed this file.
When I try to mount the micro sd using an adapter and look at the files on it it says 'You need to format the disk in drive G:before you can use it.
This happens for both cards. I try to format them but they both fail
Anybody ideas apart from leave things how they are in future!
Cheers
hmm, try to use the windows drive manager to fully remove the partition on the sd card. then create a new partition, reformat and! be sure to select the PHYSICAL DRIVE (without a letter) when editing the sd-card and making the goldcard.
it looks like you edited the volume header and the partition table is corrupted too.
if this is not helping maybe the sdcard is broken indeed, but I seriously doubt two sdcards failing at the same time
greets,
messy
Managed to format the card and put the update and djdroid files on the card and start again.
I must not be doing the wipe incorrectly at times, also the boot took a lot longer to load compared to when it was working fine so it might of been me thinking it had froze on the htc screen when in fact it was working, sorry!
All sorted now and I have put OpenDesire to see what that is like.
Thanks for the help.
Related
I've got a Tilt 2 with hard spl and can flash from my desktop no problem. I'd like to get the flashing via SD card going, but it's hanging.
I've got the nbh file copied to the root of my SD card, get the phone into bootloader, but I see a message flash up about no image. It's very quick though and then the phone hangs in the bootloader. A soft reset fixes it and the phone boots up.
I'm clearly missing something and can't figure out for the life of me what it is.
The image file is named correctly. It was copied to the phone through WMDC to the SD card. Should I put the phone into disk mode a copy the image over?
The SD card is formated in Fat 32.
Any thoughts/Advise?
Thanks.
maybe..
i had this issue before - check your .nbh file with total commander, or put it in your pc and check it. if you name it .nbh with the wm file explorer, it actually ends up RHODIMG.nbh.nbh - solution is just to remove one .nbh!
:::Whimper:::
I'm having this exact same problem!
My RHODIMG file is named correctly and in the root directory (there is nothing else on the SD card either), but I get that same EXTREMELY BRIEF message about no IMG file and then it hangs at the bootloader screen with 'Serial' in the white box on the bottom.
I've even tried using Mobile Flasher, but nothing is working. I
What am I missing??? I've tried it many times already, formatted my card a few times and loaded the RHODIMG file again, but nothing! My Rhodium will NOT connect via USB anymore, so I need to flash via SD card.
Help!
Debbie
I actually don't even rename the file, it's already got that name from the rom. It's e2 manilla 2.5 rom.
I'll try and transfer the file to the card when the phone in disk mode and see if that makes a difference...
O-M-G(!), this is *so* freakin' wacky!!!
I just switched SD cards to one that was larger (8GB rather than the 2GB), that had tons of stuff on it, then copied the RHODIMG file in the root, and then ran 'enablerapinew.cab' again, just for the hell of it...
Damned device found the RHODIMG file there from the bootloader and the update ran as expected, but not on the 2GB card with nothing else on it! WTH?!
Device says that the update is complete, so I'm booting up now and will do a few resets and then perform the tedious task of setting up my Tilt 2, etc.
Don't know whether the cab (thought I only had to run this once when Hard SPLing?) or the different card was what caused it to work, but I hope this helps someone else with the same problem. Whew!
Debbie
...Who's back in business!
SOLVED!
I don't know what caused the magic, but I was able to flash from SD card... FINALLY!
Here's what I did: Flashing Via SD Card Assistance
Hope this helps others!
Debbie
No, this did not work for me. I tried installing the cab again, but no luck, just passes on by saying no image.
Delete image off sd card, reformat FAT32 and copy image back on... I have had this problem myself, it seems that when the .nbh file copies it doesn't register on the card properly or something. Either deleting the file then re-copying seems to work but I still like to reformat too..... DON'T just copy over the top of the image file... THIS DOESN'T WORK... leads to a lot of hair pulling frustration...
Cheers...
So I tried a reformat of the card, just a quick one, not full. Still didn't work. I downloaded another image to try out, the lastest Energy rom, to flash on a completely blank card. That didn't work.
So, I went and got an older card, 8 gig, that is currently being used in a camera. The one I use now is a 16 gig card. This one worked fine.
Conclusions being perhaps a 16 gig card won't work for flashing?
brands
i have heard of certain brands having sizes that didn't work for flashing, for whatever reason. It was a long time ago on my kaiser, so i don't remember which it was, but kingston 2gb comes to mind. like i said, don't know if that is accurate, but there definitely were some that just wouldn't work. perhaps a different brand 16gb?
Well, I used the other memory stick, a Scandisk and this worked fine. Must be something with the 16 gig Kingston disk as it just will not work.
Hi,
Was running on LeeDroid 1.9, wiped and flashed for OpenDesire 3.4, came up fine then rebooted for the 3.4.2 patch and now my Desire just will not go past the HTC logo screen no matter what I do.
I can boot into recovery and have full access to everything, tried formatting the SD card and loading different ROMS but stuck @ the HTC green logo on white background.
Even Revoked3 again but the prob is not getting into the Recovery menu, its getting past that HTC screen.
Any info / idea's / help?
Thanks
Russ
If your phone turns on its not bricked, there will be a way to fix any issues your having, its just finding the correct one.
When flashing other roms did you wipe everything?
Data
Dalvik Cache
Ext parititon (if you have one)
Not wiping Dalvik is the number one reason roms get stuck bootlooping on bootscreen1.
Alternatively, it is booting but your not waiting long enough, you can always run adb logcat while booting to see if they phone is actually doing anything.
Hi,
Thank you for replying....
Figured it out that it is the SD card, here is the situation:
- Boot into recovery but cannot mount nor format the SD card
- Can see the SD card in MAC/ Windows and formated it Fat32
- Can boot without SD card
- Can boot with another SD card which is only 128Meg so cannot get LeeDroid back on it to reflash that ROM
I obviously need to format the SD card proper and it looks like I need to use Gparted but that looks like a HUGE Linux ISO download unless you know of a MAC version of it I can use?
Thanks
Found a 2Gig SD Card, got LeeDroid back on it, flashing and hoping I can boot with the original SD card so I can format with ROM manger but thinking it wont boot up with the SD card in regardless of the ROM, lets hope!
if you don't manage to boot it up. find this in the forum "PB99IMG.zip" w/o the quotes. format your sd card and put the archive in root of sd card. after that turn on your phone by pressing volume down and power on/off. wait till phone recognizes the archive and follow onscreen directions. phone should boot normally as unrooted. use unrevoked to root again and flash any rom you want.
post result.
Okay I am up but not on my original SD card, using a spare.
In recovery mode my phone refuses to mount nor format the card but can see it 100%
Seen some posts of a ADB cmd I need to use or is there something else I can try?
Thanks!
I ran "unrevoked" on my phone again and it booted when I had that problem.
But I took out the sd card when I did that. Not sure if it helps. But who knows.
Tried that, booting without the card is fine, with the card in is the issue, phone cannot see it.
I just got a 32GB Micro SD Card for my evo and I am trying to replace my current 8gb card. I was previously running MIUI 11.26 and using clockworkmod recovery. I followed these steps because I couldn't find anything Evo specific:
http://theunlockr.com/2009/10/15/ho...-android-when-using-swap-hero-and-or-apps2sd/
when trying to format and reapply the rom i was using i received this error msg:
E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)
Now I don't know where to go from there. I previously had a 16GB card fry because apparently i didn't take the correct steps to get it working properly, i do not want that to happen again. Can ANYONE give me specific instructions for swapping my SD Card for my Evo?? If so I would GREATLY appreciate it!!!
And yes...this is probably rather "noob-ish" and I DID already search the forums for any help and couldn't find what i was looking for. Again any help is appreciated
Thanks!!
just copy all files from your 8g card to the 32g card pop it in the evn and you are good to go, nothing special required. Unless you are using apps to sd, then the easiest way s to put all apps back on the phone, then after switching to the new sd put them all back on the sd.
ifly4vamerica said:
just copy all files from your 8g card to the 32g card pop it in the evn and you are good to go, nothing special required. Unless you are using apps to sd, then the easiest way s to put all apps back on the phone, then after switching to the new sd put them all back on the sd.
Click to expand...
Click to collapse
Yea I tried that and kept getting an error msg. I think there are specific steps for partitioning etc I just don't know them.
Sent from my PC36100 using XDA App
sorry if i'm misinformed but the evo has 2.2/apps2sd built in and 2.2 partitions the sd card on reboot. The article u linked i believe is for devices with 2.1 or ealier and a modded apps2sd . I have swapped many different cards and have not had to do anything that special.
Here are my steps:
1. go into settings manage applications and pull all apps back to phone.
2. copy all files/pics/vids/whatever u want to keep to computer.
3. power off, swap out sd cards, power back on.
4. phone should boot and partition sd or whatever.
5. use astro file manager and if it shows directory for sd, asec, secure then everything is good and u can move apps back to sd.
6. hook phone to sd and move all your kept files from old sd to new sd
I have seen your problem happen with a bad sd card, where did you get the 32g card. You may want to test it and see if it is actually a 32g.
Supersonic Sent
flight01 said:
sorry if i'm misinformed but the evo has 2.2/apps2sd built in and 2.2 partitions the sd card on reboot. The article u linked i believe is for devices with 2.1 or ealier and a modded apps2sd . I have swapped many different cards and have not had to do anything that special.
Here are my steps:
1. go into settings manage applications and pull all apps back to phone.
2. copy all files/pics/vids/whatever u want to keep to computer.
3. power off, swap out sd cards, power back on.
4. phone should boot and partition sd or whatever.
5. use astro file manager and if it shows directory for sd, asec, secure then everything is good and u can move apps back to sd.
6. hook phone to sd and move all your kept files from old sd to new sd
Click to expand...
Click to collapse
Thanks for the response...just a question before i go forward with it, when i replace the card and reboot the phone, is it automatically going to boot up w/ the rom i was using before replacing the card?
Edit: Tried these steps and got stuck in bootloop for MIUI (rom i had flashed previously). Even tried to put the initial PC36IMG file on the sd card and flash it through recovery, nothing! It searched for it then says it directory cannot be found. I've put the 32gb card in my card reader on my computer and it comes up just fine, I can add files to it, format it etc and everything works, any other suggestions...this is becoming highly frustrating! Again any help is definitely welcomed!
So i still cannot seem to get this working, and I've tried doing a lot of different things and nothing is working for me, I have tried to install some sort of file manager program (astro) but it doesn't recognize my sd card, yet my phone shows it as mounted and with plenty of space available. I do not know what else to do...can ANYONE help me?
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
kakashi_s1 said:
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
Click to expand...
Click to collapse
I'm going to try that and see if it works, i just went back to Amon Ra today from clockwork. Thanks!
kakashi_s1 said:
i had a similiar problem recently. For christmas I received a new sd card. At fist it didn't recognize my card. I tried to format it using my PC but I then went to my recovery (Amon RA) and clicked on the Partition SD card option.
After I partitioned, I turned on USB-MS toggle and put all my files back into the phone (including my rom zip).
I disabled USB-MS toggle, and then wiped data/factory reset, cache, dalvik-cache
Flashed zip from sdcard and violoa. It works!
try that one out.
Click to expand...
Click to collapse
how would i partition a 8 GB micro sd card with AmonRA?
Ok I screwed up majorly. I was in CWM which I had just updated to the newest version with orange text. I had finished a factory restore and cache wipe, wanting to flash the Cyanogen RC1. Well while playing around I ended up in the partitions menu and tried backing out with the power button, which apparently is the wrong procedure now that the back button is enabled in recovery. I believe I ended up selecting the 128MB partition with OM Swap (no idea what to do with these never used them before). I ended up not able to see my sd card and am stuck with phone with no ROM. I have only connected to a work computer without admin rights, the phone comes up as three removable drives that I am unable to open. Any Help Please.
I have another 2GB SD that came with phone, so when I return home I can flash CM7. My main worry is recovering the data on the card with old back ups, especially Titanium Back ups of Apps. Thanks to anyone who takes time to read and try to help.
In recovery, under Mounts and Storage there is a USB mount, so you may try that to see if you can get to your SD card. If not, then take it out and put it into you computer (if you don't have a card reader, there are USB readers you can buy). See if it comes up that way, and hopefully nothing got erased when it was partitioned.
Hi guys. Another noob gone wrong ordeal. I am super newb to all things root, rom, mod and even posting in forums. So if this is posted in the wrong place, I apologize.
Quick: Rooted Incredible for about a month 1/2.
been running CM7 nightly since day one. No other mods.
Life WAS good.
Problem: I tried flashing a different rom (Uber Kingdom 3D Gingersense) I found
really detailed instructions for full wipe which included flashing VR
Superwipe/install. I followed instructions to the letter.
Booted rom let it run its course and my phone started to shut of
randomly. I tried multiple reboots, battery pulls with the same result,
only this time my phone shut off almost immediately after the reboots
and batt pulls . I even went as far as to repeat the steps. Second time
brings me here. I guess all the wiping wiped all my stuff eg: SD card
empty and i have no idea what else got wiped in the phones
storage.
FYI: I have my entire system backed up to computer and I also use dropbox and Titanium Backup. But that doesn't help when I cant get a Hboot screen or recovery. Power button + volume down button = I see a glimpse of the Hboot screen before the screen goes black again. It will not even boot normally.
Here's what I tried to do to correct this,... Placed a copy of CM7 and clockwork mod w/ gapps on my SD and tried to reboot with the same results mentioned above.
I searched and could not find anyone with the same problem. Can anyone help?
Please and thank you.
Super Newb un-
Make sure your SD card is formatted as FAT32. You'll probably need to hook that up via a card reader or USB adapter to verify. Copy the contents of the SD card (if anything is there) to your computer, then format the card as FAT32. Maybe the SD card is dead/dying/bad?
Putting the ROM's zip and things on the SD card root won't do anything. The time to put a zip file on the root of the SD card is when applying an update.zip file, or a radio/HBOOT/recovery zip that gets renamed so when booting to HBOOT, it sees the file and asks you to update the appropriate item.
Try a different SD card, formatted to FAT32, and see what happens.
RMarkwald said:
Make sure your SD card is formatted as FAT32. You'll probably need to hook that up via a card reader or USB adapter to verify. Copy the contents of the SD card (if anything is there) to your computer, then format the card as FAT32. Maybe the SD card is dead/dying/bad?
Putting the ROM's zip and things on the SD card root won't do anything. The time to put a zip file on the root of the SD card is when applying an update.zip file, or a radio/HBOOT/recovery zip that gets renamed so when booting to HBOOT, it sees the file and asks you to update the appropriate item.
Try a different SD card, formatted to FAT32, and see what happens.
Click to expand...
Click to collapse
Thank you. I'm going to google FAT32 and what that means and give it a try. I'll post back with results. I do have another SD but how do I proceed with that option?
Again, thank you. I never expected anyone to reply as I seem to be the only one in this boat based on my all night into today searches.
No problem!
FAT32 is a type of computer file system architecture. There are many more. If you are able to hook up your phone's micro SD card to your computer (via a USB adapter, or it may have a built in SD card reader already), it will appear as a lettered disk drive. You can then right click on it to select Format, then make sure FAT32 is selected under the File System drop down.
Most new computers have card readers now, but since these phones take micro SD cards, you'll need an SD card adapter to put it into an SD card slot. The adapters normally come with the micro SD cards when you buy them, as I have five or so that I never use, just need one.
Here is the SD adapter I am speaking of: SD card adapter with micro sd card.
Here is a USB micro SD card reader: USB micro SD card reader.
Is the other SD card new, or would it have files on it? You could try putting that in your phone to see what happens.
RMarkwald said:
Make sure your SD card is formatted as FAT32. You'll probably need to hook that up via a card reader or USB adapter to verify. Copy the contents of the SD card (if anything is there) to your computer, then format the card as FAT32. Maybe the SD card is dead/dying/bad?
Putting the ROM's zip and things on the SD card root won't do anything. The time to put a zip file on the root of the SD card is when applying an update.zip file, or a radio/HBOOT/recovery zip that gets renamed so when booting to HBOOT, it sees the file and asks you to update the appropriate item.
Try a different SD card, formatted to FAT32, and see what happens.
Click to expand...
Click to collapse
Fairly easy find to format my SD card to FAT32 but sadly didn't help matters as I can't get the phone to boot to any screen at all. It gets power, takes a charge but a screen... nope. I even considered re-rooting but again I have to be at some sort of starting point screen wise which is not working at the moment.
Any other thought?
Just a black screen, no HBOOT or anything?
RMarkwald said:
Just a black screen, no HBOOT or anything?
Click to expand...
Click to collapse
No HBOOT. When pressing power+volume down HBOOT kinda just flickers but never loads. From a full off position, trying to power on, nothing happens either. I have no Idea what I've done. Can't even attach to computer via usb to view internal files.
U probably installed the incorrect rom for your device. I'm assuming your incredible is SLCD so basically is just a black screen because you installed a rom for amoled dincs. See if u can get into fastboot
(hold trackpad and power button)
And does the phone vibrate or anything when U turn it on? Does the computer recognize it as u are turning it on?
Get back to me with those answers so I can help u.
Sent from my ADR6300 using XDA App
Or maybe your battery just fried?
Sent from my ADR6300 using XDA App
eljean said:
U probably installed the incorrect rom for your device. I'm assuming your incredible is SLCD so basically is just a black screen because you installed a rom for amoled dincs. See if u can get into fastboot
(hold trackpad and power button)
And does the phone vibrate or anything when U turn it on? Does the computer recognize it as u are turning it on?
Get back to me with those answers so I can help u.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
There would be a white bar on both sides of the screen. And even so, thats only in the recovery.
Sent from my Droid Incredible running a random CM7 nightly.
eljean said:
U probably installed the incorrect rom for your device. I'm assuming your incredible is SLCD so basically is just a black screen because you installed a rom for amoled dincs. See if u can get into fastboot
(hold trackpad and power button)
And does the phone vibrate or anything when U turn it on? Does the computer recognize it as u are turning it on?
Get back to me with those answers so I can help u.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Thank you for looking.
Supposedly I installed the version for my device as there were others posting in the forum with the same phone. Had I read further into the thread I would've saw that other's were having problems as well with random power offs and reboots. But no one had reported what I'm experiencing.
eljean said:
Or maybe your battery just fried?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I'm starting to think this as well because my phone was heating up some. But it still takes a charge according to the green led indicator (full charge). I have no other way of confirming that though. I ordered an OEM replacement from the bidding site. $5. Meanwhile, I'm still hunting for a fix because the battery won't be here for a few days. I might just go buy one from a retailer to see if that helps.
Does anyone know if the phone works with the battery out, but plugged in to the charger? Might be a way to tell if its the battery or not.
Just to confirm, you try booting the phone up and it turns off? Is the screen just turning off or does everything power down?