It starts to read the pc36img but then goes to the main page. doesnt let me choose to update or not. Im stuck at 1.47. I bricked it last night and lost sd card and usb. I got the sd card working but not the usb. It need me to use terminal and issue su command but permission denied. I made the mistake of going back to stock and updating to the newest ota. I was thinking the ota update would fix my sd card but it didnt. I have clockworks mod but it wont work since im not rooted. I can only charge when the phones off and cant use the usb cable to connect to the computer and view files and use adb. I can get into the phone via fastboot but nothing else. My computer does beep when I plug it in but nothing else.
Thanks
My Hboot is 0.79.0000
radio-2.05.00.06.10
1.47.651.1
Not being able to charge has to be the worst thing.
xRepinsSporx said:
It starts to read the pc36img but then goes to the main page. doesnt let me choose to update or not. Im stuck at 1.47. I bricked it last night and lost sd card and usb. I got the sd card working but not the usb. It need me to use terminal and issue su command but permission denied. I made the mistake of going back to stock and updating to the newest ota. I was thinking the ota update would fix my sd card but it didnt. I have clockworks mod but it wont work since im not rooted. I can only charge when the phones off and cant use the usb cable to connect to the computer and view files and use adb. I can get into the phone via fastboot but nothing else. My computer does beep when I plug it in but nothing else.
Thanks
Click to expand...
Click to collapse
What OS are you using? I assume windows? Did you install the fastboot drivers? You can push files. But you can also download them via the phone. I would try downgrading the rom then downloading unrevoked 2
rjmjr69 said:
What OS are you using? I assume windows? Did you install the fastboot drivers? You can push files. But you can also download them via the phone. I would try downgrading the rom then downloading unrevoked 2
Click to expand...
Click to collapse
I can download files fine and put them on my sd card. I got that working. Im using windows 7 and I have the drivers. I dont know what or how to get it to work. How do I downgrade from the unrooted 1.47 stock rom. I cant get it to update with the pc36img or get the clockworks to open the update.zip. I cant even charge the phone when its on.
Heres the usb fix instructions but i cant root the device so i cant get it to work.
Fix USB
Press & hold vol down and power on the phone
Select fastboot by pressing the power button
Make sure in device manager the driver is installed(Win 7 x64 downloaded them automatically)
Open command prompt like you would to use ADB and type
fastboot oem boot
It will give you a log, look for the line that says INFOCID is SPCS_001, if it says something different, then use the generator below to create one(or hex edit the one I posted)
Download the mtd0.img attached or use this CID generator made by stevebrush over @ Modaco to create a custom one
Download the flash_image attached
Unzip both zips and copy both files to the SD card
Open a terminal emulator(I used ConnectBot) and type
su
cat /sdcard/flash_image > /data/flash_image
cat /sdcard/mtd0.img > /data/mtd0.img
chmod 755 /data/flash_image or chmod u+x /data/flash_image
/data/flash_image misc /data/mtd0.img
reboot
Cant get su access so cant apply the fix. This sucks
ok so when you connect the phone to the computer in Fastboot does windows see it and load the proper driver? You can push files if I am correct via fastboot Maybe you can run the root?
Hook the phone up put it in fastboot usb then look at device manager under android phone
Yes fastboot as been working. Was able to apply the sd fix that way. But I dont know how to fix the usb problem via fastboot. It wonts me to run commands in terminal and i dont have permission.
If I had adb I think i can install the usb fix but cant access the phone via adb. When i plug in phone (turned on) its makes a noice on the computer but cant do adb.
xRepinsSporx said:
If I had adb I can install the usb fix but cant access the phone via adb. When i plug in phone (turned on) its makes a noice on the computer but cant do adb.
Click to expand...
Click to collapse
OIC I'm sorry I did not realize that. I"m sure someone will be able to chime in. Have you tried running the official RUU while its in fastboot? Or have you tried Hboot USB?
tried the official RUU that i ran in the first place but i get a 104 error. version error or something. I put it in Hboot Usb but adb said it couldnt find the device. Not sure if i did it right tho. If i try to run the rooted pc36img files I get a error saying Main Version is older.
Heres some details
My Hboot is 0.79.0000
radio-2.05.00.06.10
1.47.651.1
ok download this file and run it in fastboot
http://www.megaupload.com/?d=VLNPQWL1
After reboot you should have ROOT
Then either download this or try running adb and if you can then I would download simpleroot1 and let it do its job
But here is the eng.pc3 that should work with the main version error
This one SECOND rename it to just delete the eng-
http://www.megaupload.com/?d=VLNPQWL1
ive been trying to get the pc36img file to work. I put it on sd card. then turn off device and turn it back on by pressing the down volume button. it trys to load it and then it either does nothing or gives me the main version is older error. Is this one different. I believe im doing it right. Done it many times before. I just got this phone, had the evo but had to get a replacement. power port broke inside of phone.My luck
rjmjr69 said:
ok download this file and run it in fastboot
http://www.megaupload.com/?d=VLNPQWL1
After reboot you should have ROOT
Then either download this or try running adb and if you can then I would download simpleroot1 and let it do its job
But here is the eng.pc3 that should work with the main version error
This one SECOND rename it to just delete the eng-
http://www.megaupload.com/?d=VLNPQWL1
Click to expand...
Click to collapse
ok ill try
wait rename it to what?
This one SECOND rename it to just delete the eng-
didnt understand that
Thanks for all the help so far.
xRepinsSporx said:
ive been trying to get the pc36img file to work. I put it on sd card. then turn off device and turn it back on by pressing the down volume button. it trys to load it and then it either does nothing or gives me the main version is older error. Is this one different. I believe im doing it right. Done it many times before. I just got this phone, had the evo but had to get a replacement. power port broke inside of phone.My luck
Click to expand...
Click to collapse
Yes its different try it please.
xRepinsSporx said:
wait rename it to what?
This one SECOND rename it to just delete the eng-
didnt understand that
Thanks for all the help so far.
Click to expand...
Click to collapse
REname it to the same as the first but rename the first First to something else lol or delete it all together
rjmjr69 said:
REname it to the same as the first but rename the first First to something else lol or delete it all together
Click to expand...
Click to collapse
nope doesnt work. Still getting the main version error
does adb work when in HBoot usb plug mode
I'm having pretty much the exact same problem. USB bricked EVO on 2.1 without root. Need root to fix the USB, need USB to achieve root. Really hoping for a miracle, here.
i just ran into the same problem i used an auto root to downgrade hboot 2.02 and it dropped it down .0093 after this i lost usb and sd card i got sd card back but have no way to use adb or terminal to get usb back i used an ruu renamed as pc36img to get back to hboot.2.1.001 but still no usb and no way to root to get terminal to work any ideas?
i am having the same problem here too. doesnt look like there is a solution?
Sd card not workin'
Hey man, I borked my EVO 4g too... What did you do to fix the sd from not being able to be mounted? I can only get into bootloader and recovery... And I heard that if yu can get into either of those, the phone i fixable... Any help, please?
Related
USB Brick and brick sdcard, please help
Hi
Maybe giving a bit more detail about what happened to get the usb/sd bricked would help people to reply you
My device is connected to the PC does not recognize the Android and the recovery. currently no driver error: "Qualcomm CDMA Technologies MSM"
(Sorry for my English which should not be used goolge translate)
Do you have ROOT??
I unbricked my Desire yesterday so I know how to do it (only with ROOT).
Just download the correct RUU for your region from one of the post in this forum. Connect the USB cable, run the RUU exe and it flash your phone back to the OTA ROM.
I was put on the original room and then proceed boot, successfully run the STEP1, STEP2, but to the error can not enter the recovery
yolkie said:
Just download the correct RUU for your region from one of the post in this forum. Connect the USB cable, run the RUU exe and it flash your phone back to the OTA ROM.
Click to expand...
Click to collapse
Rom I downloaded OTA and it still can not root, and do not receive equipment, including sdcard
Maybe have a look here: (good q+a)
http://forum.xda-developers.com/showthread.php?t=749551
edit: also to this usb brick fix:
http://forum.xda-developers.com/showthread.php?t=691639
with kind regards..Alex
yolkie said:
Just download the correct RUU for your region from one of the post in this forum. Connect the USB cable, run the RUU exe and it flash your phone back to the OTA ROM.
Click to expand...
Click to collapse
His computer don't have connection with phone. It's BRICK, so how he can use RUU?????
lanh_lung do you have ROOT(modified recovery)???
edit: also to this usb brick fix:
http://forum.xda-developers.com/showthread.php?t=691639
with kind regards..Alex[/QUOTE]
My Desire is: T-Mobile have to follow steps on it?
lanh_lung said:
edit: also to this usb brick fix:
http://forum.xda-developers.com/showthread.php?t=691639
with kind regards..Alex
Click to expand...
Click to collapse
My Desire is: T-Mobile have to follow steps on it?[/QUOTE]
Champion ... no matter if your Desire is or not operator ...
Had the same problem and I was able to retrieve the roles of USB and SD Card making the procedures described in the tutorial past links above ...
Read carefully and make with calm ...You'll see that it is not as difficult as it sounds!
Good luck!
lanh_lung do you have ROOT(modified recovery)???[/QUOTE]
step2 I can not run because of the driver error: "Qualcomm CDMA Technologies MSM"
lanh_lung said:
USB Brick and brick sdcard, please help
Click to expand...
Click to collapse
it's very strange, I have exactly the same problem since yesterday!
SD Card brick is resolved by this command in fastboot mode :
fastboot oem enableqxdm 0
But USB Brick is not resolved and my phone no longer root how can I do? I tried unsuccessfully Z4 root, is there another software to root without USB?
My capital is very little English, I did follow the instructions at the link:http://forum.xda-developers.com/showthread.php?t=691639. But it is not possible, please provide detailed guidance and may include images is very good.
(Each charge to just plug the cable and reboot the machine to receive a new charger)
Hi, I had the Same Problems some Minutes ago. (I was using the new AmonRA Recovery to flash a new ROM).
Here are the Steps what I have done to solve my problem (Rooted ROM is required):
1.) Download Android SDK -> Then open a comand Line and change into the Tools Directory:
cd path\to\AndroidSDK\tools
2.) You need to know your CID.
Turn your Phone into fastboot mode (Pressing Back and Power On). Then in your Comand Line do:
fastboot oem boot
The log will say something like the following:
CODE
.
.
.
#INFOCID is T-Mob101
In this specific case, the CID is T-Mob101.
3.) Get and extract the the attached Rescue.zip File.
Open the File "misc.img" in a hex Editor of your Choice and change "T-MOB101" to your CID
3.) Turn your Phone again into fastboot mode (Pressing Back and Power On) then go to your Command Line and do:
fastboot oem enableqxdm 0 (This will enable your SD Card to be seen in your favorite explorer on your phone)
then "Reboot"
4.) Then get the two files to your SD-Card (email them or dropbox them or what ever).
5.) Open a Terminal Emulator (http://www.appbrain.com/app/android-terminal-emulator/jackpal.androidterm) on our Phone
enter:
su (Enter to get Superuser Rights)
cat /sdcard/flash_image > /data/flash_image (this will copy the file to /data, therefore you need root!)
cat /sdcard/misc.img > /data/misc.img (this will copy the file to /data, therefore you need root!)
chmod 755 /data/flash_image (this makes the file "flash_image" executable)
/data/flash_image misc /data/misc.img (this will execute flash_image the result will be that you overwrite your misc section)
Reboot.
Everything should be ok
Ok this is a bit weird cos my usb got bricked yesterday too but a lot of searching i have managed to get it sorted. i lost root too so used this method http://forum.xda-developers.com/showpost.php?p=9056719&postcount=15 its similar to the above but for people who have lost root.
I've already re rooted and back on my leedroid2.2b
Guys can i just ask if your usb got bricked after you s-offed your desire and upgraded to the new amon ra recovery
I "S-OFF'ed" my Device some Time ago without any Problems. Today I flashed the new AmonRA via Unrevoked. Everthing went fine. After Flashing a new ROM (Oxygen) i had the mentioned USB/SD-Card Problem.
I was able to access my Device via Fastboot and get into Recovery but my SD Card was not able to be mounted anymore. (Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)).
Also i was stuck in a Bootloop after the "S-OFF Bootlogo".
After "fixing" the SD Card Problem, i was able to Boot the new Rom, access the SD Card via FIle Explorer, but my Device was not recognized properly while connected via USB. Something like "unrecognized Quallcom Device" Driver not found.
Yeah i had similar experience i had i flashed new amon ra via fastboot then backed up my leedroid2.2b rom via rom manager just cos i could rename it easily then booted into amon ra wiped and flashed latest leedroid. On the reboot it decided to reboot on the spalsh screen a few times and then the boot animation started when i booted i realised i had sd problem but wasn't aware of usb so ended up going the long way around
So something weird happend with my desire today, I tried to reboot to recovery and it just frezes at splash screen...
cant boot to recovery or fire up the system
I think fastboot works normaly. Cause I can find my phone in cmd /fastboot devices. Is there anything I can flash trough fastboot to fixthis ?
You could first try flashing your recovery image, which you can place to the root of your SD card with a card reader. Then execute the following command while your phone is connected to your PC in Fastboot mode using ADB:
fastboot boot <name-of-your-recovery.img> (your current recovery image)
fastboot flash recovery <name-of-recovery.img>
If what I suggested above does not work, then you could also try flashing back to stock firmware. Try to extract the rom.zip from your stock RUU (found here) and rename it to PB99IMG.zip, then place this to the root of your SD card with a card reader, for instance, and then enter Fastboot mode by first powering off your phone and keeping your finger pressed down on the back button and pressing the power button once. When in Fastboot mode (release your finger from the back button), connect your phone to your PC via USB, and wait for "Fastboot" to change to "Fastboot USB". The zip should then run for you and allow you to revert back to stock ROM.
Note: if you were originally branded, you will also require a Gold Card to return to stock ROM. You can use a card reader to create one using the Gold Card tool in my sig below.
Ok ill finnish my post here...
thanks for response btw
anyway I dont have a card reader is there no way to flash from my computer?
Iver tried to /fastboot flash some files but I just get errors (status malformed)
acejacksooted said:
Ok ill finnish my post here...
thanks for response btw
anyway I dont have a card reader is there no way to flash from my computer?
Iver tried to /fastboot flash some files but I just get errors (status malformed)
Click to expand...
Click to collapse
Just to make sure, did you put your device in fastboot mode before attempting to boot/flash the image?
What does "fastboot devices" return?
E.g:
C:\Users\Me>cd..
C:\Users>cd..
C:\>cd android-sdk-windows\tools
C:\android-sdk-windows\tools>fastboot devices
/fastboot devices returns HT061PL00341
acejacksooted said:
/fastboot devices returns HT061PL00341
Click to expand...
Click to collapse
Ok, then it finds your Desire, thats good.
The things is... you need your rom recovery image/rom image on the root of your SD card, if they are not there, then it will probably return the error you suggested above.
Try using a different phone that accepts MicroSD cards or a USB card reader/Laptop card reader (when you purchased your SD Card, it would have come with an adaptor for the SD card, place the SD card into the adaptor and then try inserting this into your laptop card reader bay).
Then you can try the fastboot commands above having transferred your image to it.
You could even try this in fastboot mode (fastboot USB) in ADB:
fastboot update PB99IMG.zip (name of your renamed RUU file)
Ok ill get myself a card reader tomorrow , if dosnt work I´ll be a new owner of an DHD
acejacksooted said:
Ok ill get myself a card reader tomorrow , if dosnt work I´ll be a new owner of an DHD
Click to expand...
Click to collapse
OK mate... but if you want DHD, are you aware that you can have these ROMs running on the Desire? They were ported over and contain the same new Sense UI with the Advanced Power Hibernation option, etc.
Do you not think you will be just wasting your money?
MasDroid said:
OK mate... but if you want DHD, are you aware that you can have these ROMs running on the Desire? They were ported over and contain the same new Sense UI with the Advanced Power Hibernation option, etc.
Do you not think you will be just wasting your money?
Click to expand...
Click to collapse
well the DHD has a somewhat larger screen. So I think its worth it(to bad it dosnt support hdmi) So if I cant get my desire up and running again I will not be that sad. I sent you a pm. thanks for all the help. Must wait untill the stores are open, to try again. I´ll give you an update tomorrow.
acejacksooted said:
well the DHD has a somewhat larger screen. So I think its worth it(to bad it dosnt support hdmi) So if I cant get my desire up and running again I will not be that sad. I sent you a pm. thanks for all the help. Must wait untill the stores are open, to try again. I´ll give you an update tomorrow.
Click to expand...
Click to collapse
Ok bud... until then, take it easy
Ok i got my card reader, but i have no clue which file I shoud download, i tried the first one but phone returned error/wrong file
update: first zip file was damaged trying again...
should i download an Archived File or an Binary File and change the file extension ?
acejacksooted said:
should i download an Archived File or an Binary File and change the file extension ?
Click to expand...
Click to collapse
Was your phone originally branded? If it was (and you previously de-branded), then you need to create a Gold Card first (use the tool below in my sig with your card reader).
After you have made the Gold Card, download the following: http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_159811_signed.zip
Rename it to PB99IMG.zip, place to the root of your SD card. Power off the phone, enter fastboot mode (back + power), connect the phone via USB, fastboot will then change to "Fastboot USB". It will check the PB99IMG.zip and confirm its selection, and be prepared to wait a few minutes until it flashes.
you sir are my HERO everything got reinstalled, weeeeeeeeeeeeeee
I´m 100% back to stock right?
no S-OFF no superuser ?
but I bet I can root it again ...
next question:
how did my phone got messed up in the first place? I know i had eclipse on with usb debugging on. I think eclipse tried to adb push some files over and I just removed the phone from the charger. I'm going to be more careful next time
acejacksooted said:
you sir are my HERO everything got reinstalled, weeeeeeeeeeeeeee
I´m 100% back to stock right?
no S-OFF no superuser ?
but I bet I can root it again ...
Click to expand...
Click to collapse
Yes, you will be back to stock firmware. If your phone was originally S-ON, it will remain as S-ON unless you flashed the modified Hboot (AlphaRev) to unclock the NAND security flag providing full root access to your phone.
There will be no Superuser access when reverting back to stock firmware, unless you went and flashed a modified stock ROM that has root access (software root).
I was trying to root my cousin's evo today. I rooted and loaded custom roms on mine yesterday and it went smoothly with unrevoked 3. But this one said that the firmware may be too new. So i tried putting a pc36img file on it and as it updated it bypassed the bootlader and when it gets to radio V2 it vibrates a few times then says fail-PU and the rest go through ok. then at the end it says update fail partition update fail. and when i try to reboot it stays stuck at the white htc evo screen. i can pull the battery out and get it back to the bootloader but i cant recover it cuz its not rooted. I NEED HELP FIXING THIS what do i do?
From the bootloader, select clear storage to perform a factory reset, then try to run unrevoked again.
I selected clear storage then it rebooted after 5 seconds. But it stays stuck at the white htc evo screen again. I have my rooted phone right here would putting my sd in his phone do anything? What else can i do?
The computer wont recognize it as a drive so i cant put new files in it.
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip Rename the file to PC36IMG, the flash it in the bootloader. Its an RUU of the 3.70 stock image. After that runs, try to re-root.
but i cant access the sd card through my computer to even rename it
errie806 said:
but i cant access the sd card through my computer to even rename it
Click to expand...
Click to collapse
So are you saying the sdcard is dead, or just not through the phone?
Cuz you can take the sdcard out from under the battery and mount it via adapter to the pc, or when downloading it, save it as PC36IMG one time.
Have access to another SD card?
heres no way i can make it recognize it through the bootloader? i dont have an adapter. what if i take the sd card out of my phone (htc evo rooted with warm twopointtwo.) and put it in his? can i recover the phone like that?
errie806 said:
heres no way i can make it recognize it through the bootloader? i dont have an adapter. what if i take the sd card out of my phone (htc evo rooted with warm twopointtwo.) and put it in his? can i recover the phone like that?
Click to expand...
Click to collapse
Only if you do what I said and put it on there. Or run an ruu exe, and connect the phone via fastboot.
ok since i dont have an adapter what im doing is putting another 1gb sdcard i found in my phone and im going to put the pc36img on the root of this one. then try to boot the broken phone with this sdcard. does that sound right? also that link for the file doesnt work.
Sounds good
> http://www.shipped-roms.com/shipped...15.00.11.19_NV_1.90_release_161482_signed.exe
Boot the phone into fastboot, connect to pc, once it shows up as fastboot usb on the phone, run the ruu exe.
wait i found an sd card adapter now. so what do i do next?
teh roxxorz said:
Sounds good
> http://www.shipped-roms.com/shipped...15.00.11.19_NV_1.90_release_161482_signed.exe
Boot the phone into fastboot, connect to pc, once it shows up as fastboot usb on the phone, run the ruu exe.
Click to expand...
Click to collapse
so i download this file. rename as PC36IMG. then put on the root of the phone. then i boot into fastboot and run the update when it finds it?
errie806 said:
so i download this file. rename as PC36IMG. then put on the root of the phone. then i boot into fastboot and run the update when it finds it?
Click to expand...
Click to collapse
Well now that you got it on there, no need for fastboot, just select update when prompted, then reboot.
teh roxxorz said:
Well now that you got it on there, no need for fastboot, just select update when prompted, then reboot.
Click to expand...
Click to collapse
so i downloaded that file renamed it PC36IMG placed it on the root and held the volume down button and the power to get to the bootloader but it wont update the phone with that file. what next?
errie806 said:
so i downloaded that file renamed it PC36IMG placed it on the root and held the volume down button and the power to get to the bootloader but it wont update the phone with that file. what next?
Click to expand...
Click to collapse
What do you mean it won't update. Then you try the fastboot and run the exe from the pc.
teh roxxorz said:
What do you mean it won't update. Then you try the fastboot and run the exe from the pc.
Click to expand...
Click to collapse
it doesnt find the pc36img file and update the phone. how do i fastboot and run it from the pc? what do i click on
errie806 said:
it doesnt find the pc36img file and update the phone. how do i fastboot and run it from the pc? what do i click on
Click to expand...
Click to collapse
Its named PC36IMG.zip, not PC36IMG.zip.zip? And from the bootloader, select fastboot , connect to pc, when it shows up as fastboot usb on the phone then run the ruu exe from the pc. I linked you like 3 posts up.
teh roxxorz said:
Its named PC36IMG.zip, not PC36IMG.zip.zip? And from the bootloader, select fastboot , connect to pc, when it shows up as fastboot usb on the phone then run the ruu exe from the pc. I linked you like 3 posts up.
Click to expand...
Click to collapse
the file i downloaded from you is a .exe file i renamed it so its now PC36IMG.exe. am i supposed to name it PC36IMG.zip so that its PC36IMG.zip.exe?
errie806 said:
the file i downloaded from you is a .exe file i renamed it so its now PC36IMG.exe. am i supposed to name it PC36IMG.zip so that its PC36IMG.zip.exe?
Click to expand...
Click to collapse
http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip This was the file you needed to rename to PC36IMG..that's probably why it didn't update. regardless, connect the phone into fastboot like I said, then run the exe file on the pc.
Hi guys,
Well basically, I've been a massive idiot and somehow my HTC Desire is now non-responsive. I am running the Oxygen rom from a nandroid backup that I had done previously but now i am unable to access recovery at all. The phone does power on. I do the usual power + back button hold to get into the bootloader then recovery and do the usual ./recovery-mac.sh command in terminal but all I get in response is this now:
mac:~ Dan$ ./recovery-mac.sh
Desire Recovery Mode
Pushing required files to device...
Password:
error: device not found
error: device not found
mac:~ Dan$ error: device not found
I can access the MicroSD card through a computer but the phone won't recognize there is one. WiFi works (but can't download anything from market), radio doesn't as no signal and of course 3G is out of the question.
Is there a solution to my problem?!
From a person in dying need.
EDIT:
Since trying to work this out I have reformatted the microSD card and replaced its contents afterwards, still to no avail.
Try to flash stock ROM from here: http://forum.xda-developers.com/showthread.php?t=695667
Be careful to select the appropriate RUU.
Turn your phone in fastboot (back + power) and run the exe file. You very probably might need a goldcard. Search the forum for that. Good luck !
you're going to have to talk me through this (step by step) like i'm an idiot please paul! i've downloaded the appropriate RUU but i'm not sure how to apply it. help?
guywithdesire1992 said:
you're going to have to talk me through this (step by step) like i'm an idiot please paul! i've downloaded the appropriate RUU but i'm not sure how to apply it. help?
Click to expand...
Click to collapse
Start your phone in fastboot --> Hold Back button + press power
You should get a menu which has as title FASTBOOT.
Connect your phone to your PC and then run the exe file. You must have HTC Sync installed.
If this fails try making a goldcard. You can find a tutorial here: http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
the computer won't recognise the phone paul. am going to have to try and make a goldcard i guess. :/
okay i am completely stuck. i have previously made a goldcard but this is just ridiculous now. my sdcard contains the clockwork mod folder so why can't i boot into recovery, what is going wrong with it? if i boot up i'm stuck on the oxygen rom, cant install anything as wifi wont download stuff as sd card isnt recognized (tell me why?), have sporadic signal, no 3g whatsoever.
can someone please explain step by step how to get recovery working again.
bumpbumpbump
So whats your current status?
Your Desire boots into ROM, but doesnt work well.
You cannot but into recovery.
You made a gold card.
Flashing a RUU didnt work.
Your SD is not recognized by the phone or by PC? Is it the goldcard you made?
Correct?
i haven't been able to make a goldcard, i have one previously that i cannot find.
the desire boots into the oxygen rom, ver. 2.0.3 but will not recognise the sd card inserted and wont connect to a mac or computer and show up as a device. i cannot boot into recovery at all as i just get device not found.
confused?
guywithdesire1992 said:
confused?
Click to expand...
Click to collapse
yes ^^
Do you only use Mac or have you access to a pc, too?
If you can get your phone into USB Debugging mode, you can try to flash a brand new recovery via fastboot command.
Maybe your rom got corrupted somehow.
If neither of this works, you should try another sd card I guess.
how do you use the fastboot command?
i have used the ./recovery-mac.sh command in terminal but whats this fastboot command and where can i get it?
EDIT:
I now have fastboot but whenever i try the command ./fastboot-mac flash recovery.img it ends up saying permission denied. is this because i am S-ON?
k-c-0 said:
yes ^^
Do you only use Mac or have you access to a pc, too?
Click to expand...
Click to collapse
i have access to a pc as well too. i'd rather not have to go through the lengthy process of making a goldcard if i have to. trying to exhaust all other options first....
Hi,
Today I backed up my mobile ( using amon ra ), partitioned new SD card and placed backup back. All succesful, then my phone got a boot animation loop. Got battery out and tried to flash the ROM again ( insertcoin stable ). Then It can't read my SD card anymore! The error was: E: Can't mount /dev/block/mmcblk0p1
I can't flash a ROM anymore, but I wiped my phone after that for trying to flash, didn't work. Now my phone is turned on. It boots with a grey black android logo, and then I get parts of insertcoin. I'm missing a lot of apps and apk's, ( for example the settings and the lockscreen ). So I'm missing a lot.
I can't power my phone when it's on, only when it's off. So please help me!
And explain it as easy as possible.
Search the forums USB Brick -
it will contain the command:
fastboot enableqxdm 0
Marc. said:
Hi,
Today I backed up my mobile ( using amon ra ), partitioned new SD card and placed backup back. All succesful, then my phone got a boot animation loop. Got battery out and tried to flash the ROM again ( insertcoin stable ). Then It can't read my SD card anymore! The error was: E: Can't mount /dev/block/mmcblk0p1
I can't flash a ROM anymore, but I wiped my phone after that for trying to flash, didn't work. Now my phone is turned on. It boots with a grey black android logo, and then I get parts of insertcoin. I'm missing a lot of apps and apk's, ( for example the settings and the lockscreen ). So I'm missing a lot.
I can't power my phone when it's on, only when it's off. So please help me!
And explain it as easy as possible.
Click to expand...
Click to collapse
if you can get to fastboot, you can use: fastboot oem enableqxdm 0
And that's it?
Just turn phone on ( volume down + power ), then power button for fastboot.
Plug it into PC, start adb and then that command?
And then my phone can read USB again?
Edit: SD again?
Edit2: I am in fastboot, but where to put the command?
first cd and then the android-sdk tools folder? ( ADB is not in there, that is in platform-tools )
So what to do?
Phone must say: FASTBOOT USB
You have to put this where your fastboot is located, not the adb (but i have them in one place )
I think it worked, I've done it using the fastboot thing.
Now flashing Insertcoin again Hope it works!!
Ok, got my SD working again, with Insertcoin. But it recognize the computer or anything very late! When connected to the computer or power, it takes a few minutes before it recognize it, the computer even doen't ask for diskdrive or something like that, it only powers... What to do?
Edit: Do I need to do these options too? http://android.modaco.com/topic/309939-usb-brickrickrolledb0rked-fixed/ numbers 3,4,5 and 6?
Bump... Please help, I need my phone tomorrow and I can't miss it.
Marc. said:
Bump... Please help, I need my phone tomorrow and I can't miss it.
Click to expand...
Click to collapse
Try the Android Flasher, I haven't used it but others say it worked for them
http://forum.xda-developers.com/showthread.php?t=794638
Marc. said:
Ok, got my SD working again, with Insertcoin. But it recognize the computer or anything very late! When connected to the computer or power, it takes a few minutes before it recognize it, the computer even doen't ask for diskdrive or something like that, it only powers... What to do?
Edit: Do I need to do these options too? http://android.modaco.com/topic/309939-usb-brickrickrolledb0rked-fixed/ numbers 3,4,5 and 6?
Click to expand...
Click to collapse
Yes you need to flash something as well, and the instructions there may work as a quick fix, but for me if the wrong image is flashed things like bluetooth don't work and other quirks are introduced.
I had to to generate a CID image specific to your variant of the Desire from this site: http://ks25738.kimsufi.com/misc/
The Rom version is irrelevant I think so enter the example on the site.
For "cid", input the following into the terminal (Mac? and Linux):
Code:
fastboot oem boot | grep #INFOCID
You should get a line like:
Code:
#INFOCID is HTC__E11
Which means you enter "HTC__E11" as the CID.
I you're on Windows (why?) or the above doesn't work, forget the pipe (|) and everything that follows and look for "#INFOCID" in the output which should be several lines long.
Put the generated mtd0.img file in the same directory as fastboot (or anywhere if you think you can handle the paths properly) and enter:
Code:
fastboot flash misc mtd0.img
Obviously you need to be in Fastboot USB mode in the bootloader for any of this to work.
For some probably unrelated reason, USB file transfers still don't work for me so I forced to use the Samba Filesharing app from the market.
I got the info from this page: http://forum.xda-developers.com/showthread.php?t=691639
Ok, where can I find the Rom version? And please give the flash of that file in more steps, I don't understand it.
Bump, I really need my phone in a few hours! Please help!
Ok, I'm further.
I have now a few problems with: 3. Get flash_image from the attached files below
Move this to /data/ , and flash the modified image using:
"/data/flash_image misc /data/mtd0.img"
You can move both mtd0.img and flash_image by putting it on your sdcard, and issueing the following command in a terminal emulator:
'cat /sdcard/flash_image > /data/flash_image'
'cat /sdcard/mtd0.img > /data/mtd0.img'
You might have to do 'chmod u+x /data/flash_image' before you run the commands (or chmod 755 /data/flash_image)
4. Repeat step 3 a couple of times if it doesn't seem to work well.
5. All done! Reboot, you should have normal usb connectivity. Post your 'fastboot oem boot' log and intermediate steps if it fails.
I made a mdt0.img using http://ks25738.kimsufi.com/misc/
My cid was HTC__E11
and ROM version 2.36.405.8 and it gave me a mdt0.img file
Now step 3, I don't know how to let it flash... I don't know what to do now with the file... Please help and give everything in simple steps
Follow The Usb brick fix Link On My sig,hope that will solve your problem.
Exiled_SouL said:
Follow The Usb brick fix Link On My sig,hope that will solve your problem.
Click to expand...
Click to collapse
I read it, but a few questions...
( My phone is S-ON )
1. I'm not on a stock rom, but on Insertcoin
2. I can already acces my SD card, so can I skip the first step? Done that yesterday already.
3. Can I use the mtd0.img generator? If yes I have already the file.
4. With step 3, which files must be in /data/data?
5. With step 2, I have super user, so can I use that instead of the root acces thing?
SOLVED!! Thanks everyone!
I read a lot, and its succesful! Diskdrive, wall charching bluetooth EVERYTHING!!!
Thanks everyone! I really appreciate it.