So something weird happend with my desire today, I tried to reboot to recovery and it just frezes at splash screen...
cant boot to recovery or fire up the system
I think fastboot works normaly. Cause I can find my phone in cmd /fastboot devices. Is there anything I can flash trough fastboot to fixthis ?
You could first try flashing your recovery image, which you can place to the root of your SD card with a card reader. Then execute the following command while your phone is connected to your PC in Fastboot mode using ADB:
fastboot boot <name-of-your-recovery.img> (your current recovery image)
fastboot flash recovery <name-of-recovery.img>
If what I suggested above does not work, then you could also try flashing back to stock firmware. Try to extract the rom.zip from your stock RUU (found here) and rename it to PB99IMG.zip, then place this to the root of your SD card with a card reader, for instance, and then enter Fastboot mode by first powering off your phone and keeping your finger pressed down on the back button and pressing the power button once. When in Fastboot mode (release your finger from the back button), connect your phone to your PC via USB, and wait for "Fastboot" to change to "Fastboot USB". The zip should then run for you and allow you to revert back to stock ROM.
Note: if you were originally branded, you will also require a Gold Card to return to stock ROM. You can use a card reader to create one using the Gold Card tool in my sig below.
Ok ill finnish my post here...
thanks for response btw
anyway I dont have a card reader is there no way to flash from my computer?
Iver tried to /fastboot flash some files but I just get errors (status malformed)
acejacksooted said:
Ok ill finnish my post here...
thanks for response btw
anyway I dont have a card reader is there no way to flash from my computer?
Iver tried to /fastboot flash some files but I just get errors (status malformed)
Click to expand...
Click to collapse
Just to make sure, did you put your device in fastboot mode before attempting to boot/flash the image?
What does "fastboot devices" return?
E.g:
C:\Users\Me>cd..
C:\Users>cd..
C:\>cd android-sdk-windows\tools
C:\android-sdk-windows\tools>fastboot devices
/fastboot devices returns HT061PL00341
acejacksooted said:
/fastboot devices returns HT061PL00341
Click to expand...
Click to collapse
Ok, then it finds your Desire, thats good.
The things is... you need your rom recovery image/rom image on the root of your SD card, if they are not there, then it will probably return the error you suggested above.
Try using a different phone that accepts MicroSD cards or a USB card reader/Laptop card reader (when you purchased your SD Card, it would have come with an adaptor for the SD card, place the SD card into the adaptor and then try inserting this into your laptop card reader bay).
Then you can try the fastboot commands above having transferred your image to it.
You could even try this in fastboot mode (fastboot USB) in ADB:
fastboot update PB99IMG.zip (name of your renamed RUU file)
Ok ill get myself a card reader tomorrow , if dosnt work I´ll be a new owner of an DHD
acejacksooted said:
Ok ill get myself a card reader tomorrow , if dosnt work I´ll be a new owner of an DHD
Click to expand...
Click to collapse
OK mate... but if you want DHD, are you aware that you can have these ROMs running on the Desire? They were ported over and contain the same new Sense UI with the Advanced Power Hibernation option, etc.
Do you not think you will be just wasting your money?
MasDroid said:
OK mate... but if you want DHD, are you aware that you can have these ROMs running on the Desire? They were ported over and contain the same new Sense UI with the Advanced Power Hibernation option, etc.
Do you not think you will be just wasting your money?
Click to expand...
Click to collapse
well the DHD has a somewhat larger screen. So I think its worth it(to bad it dosnt support hdmi) So if I cant get my desire up and running again I will not be that sad. I sent you a pm. thanks for all the help. Must wait untill the stores are open, to try again. I´ll give you an update tomorrow.
acejacksooted said:
well the DHD has a somewhat larger screen. So I think its worth it(to bad it dosnt support hdmi) So if I cant get my desire up and running again I will not be that sad. I sent you a pm. thanks for all the help. Must wait untill the stores are open, to try again. I´ll give you an update tomorrow.
Click to expand...
Click to collapse
Ok bud... until then, take it easy
Ok i got my card reader, but i have no clue which file I shoud download, i tried the first one but phone returned error/wrong file
update: first zip file was damaged trying again...
should i download an Archived File or an Binary File and change the file extension ?
acejacksooted said:
should i download an Archived File or an Binary File and change the file extension ?
Click to expand...
Click to collapse
Was your phone originally branded? If it was (and you previously de-branded), then you need to create a Gold Card first (use the tool below in my sig with your card reader).
After you have made the Gold Card, download the following: http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_159811_signed.zip
Rename it to PB99IMG.zip, place to the root of your SD card. Power off the phone, enter fastboot mode (back + power), connect the phone via USB, fastboot will then change to "Fastboot USB". It will check the PB99IMG.zip and confirm its selection, and be prepared to wait a few minutes until it flashes.
you sir are my HERO everything got reinstalled, weeeeeeeeeeeeeee
I´m 100% back to stock right?
no S-OFF no superuser ?
but I bet I can root it again ...
next question:
how did my phone got messed up in the first place? I know i had eclipse on with usb debugging on. I think eclipse tried to adb push some files over and I just removed the phone from the charger. I'm going to be more careful next time
acejacksooted said:
you sir are my HERO everything got reinstalled, weeeeeeeeeeeeeee
I´m 100% back to stock right?
no S-OFF no superuser ?
but I bet I can root it again ...
Click to expand...
Click to collapse
Yes, you will be back to stock firmware. If your phone was originally S-ON, it will remain as S-ON unless you flashed the modified Hboot (AlphaRev) to unclock the NAND security flag providing full root access to your phone.
There will be no Superuser access when reverting back to stock firmware, unless you went and flashed a modified stock ROM that has root access (software root).
Related
Hi guys,
Well basically, I've been a massive idiot and somehow my HTC Desire is now non-responsive. I am running the Oxygen rom from a nandroid backup that I had done previously but now i am unable to access recovery at all. The phone does power on. I do the usual power + back button hold to get into the bootloader then recovery and do the usual ./recovery-mac.sh command in terminal but all I get in response is this now:
mac:~ Dan$ ./recovery-mac.sh
Desire Recovery Mode
Pushing required files to device...
Password:
error: device not found
error: device not found
mac:~ Dan$ error: device not found
I can access the MicroSD card through a computer but the phone won't recognize there is one. WiFi works (but can't download anything from market), radio doesn't as no signal and of course 3G is out of the question.
Is there a solution to my problem?!
From a person in dying need.
EDIT:
Since trying to work this out I have reformatted the microSD card and replaced its contents afterwards, still to no avail.
Try to flash stock ROM from here: http://forum.xda-developers.com/showthread.php?t=695667
Be careful to select the appropriate RUU.
Turn your phone in fastboot (back + power) and run the exe file. You very probably might need a goldcard. Search the forum for that. Good luck !
you're going to have to talk me through this (step by step) like i'm an idiot please paul! i've downloaded the appropriate RUU but i'm not sure how to apply it. help?
guywithdesire1992 said:
you're going to have to talk me through this (step by step) like i'm an idiot please paul! i've downloaded the appropriate RUU but i'm not sure how to apply it. help?
Click to expand...
Click to collapse
Start your phone in fastboot --> Hold Back button + press power
You should get a menu which has as title FASTBOOT.
Connect your phone to your PC and then run the exe file. You must have HTC Sync installed.
If this fails try making a goldcard. You can find a tutorial here: http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
the computer won't recognise the phone paul. am going to have to try and make a goldcard i guess. :/
okay i am completely stuck. i have previously made a goldcard but this is just ridiculous now. my sdcard contains the clockwork mod folder so why can't i boot into recovery, what is going wrong with it? if i boot up i'm stuck on the oxygen rom, cant install anything as wifi wont download stuff as sd card isnt recognized (tell me why?), have sporadic signal, no 3g whatsoever.
can someone please explain step by step how to get recovery working again.
bumpbumpbump
So whats your current status?
Your Desire boots into ROM, but doesnt work well.
You cannot but into recovery.
You made a gold card.
Flashing a RUU didnt work.
Your SD is not recognized by the phone or by PC? Is it the goldcard you made?
Correct?
i haven't been able to make a goldcard, i have one previously that i cannot find.
the desire boots into the oxygen rom, ver. 2.0.3 but will not recognise the sd card inserted and wont connect to a mac or computer and show up as a device. i cannot boot into recovery at all as i just get device not found.
confused?
guywithdesire1992 said:
confused?
Click to expand...
Click to collapse
yes ^^
Do you only use Mac or have you access to a pc, too?
If you can get your phone into USB Debugging mode, you can try to flash a brand new recovery via fastboot command.
Maybe your rom got corrupted somehow.
If neither of this works, you should try another sd card I guess.
how do you use the fastboot command?
i have used the ./recovery-mac.sh command in terminal but whats this fastboot command and where can i get it?
EDIT:
I now have fastboot but whenever i try the command ./fastboot-mac flash recovery.img it ends up saying permission denied. is this because i am S-ON?
k-c-0 said:
yes ^^
Do you only use Mac or have you access to a pc, too?
Click to expand...
Click to collapse
i have access to a pc as well too. i'd rather not have to go through the lengthy process of making a goldcard if i have to. trying to exhaust all other options first....
I was trying to flash a insertcoin ROM the other day and i failed to do so. I then just kept trying to flash the same file and wiping my cache and stuff in recovery. Then i tried another ROM but still didnt work; i formatted my sd card and after that when in recovery my phone says fail to mount sd card dev/......so on so on. I think my problem is that i have a screwed up OS im not too sure. i hope some experts can give me some suggestions to solve this problem thank you
stevenc123 said:
I was trying to flash a insertcoin ROM the other day and i failed to do so. I then just kept trying to flash the same file and wiping my cache and stuff in recovery. Then i tried another ROM but still didnt work; i formatted my sd card and after that when in recovery my phone says fail to mount sd card dev/......so on so on. I think my problem is that i have a screwed up OS im not too sure. i hope some experts can give me some suggestions to solve this problem thank you
Click to expand...
Click to collapse
It's one of two possibilities:
1) You've usb bricked your device. To solve try this: http://forum.xda-developers.com/showthread.php?t=691639&highlight=usb+brick
2) Mis-formatted SD. SD has to have one FAT partition (first) and a second ext3/4 partition. Both have to be primary.
Do you mind to explain how to format it correctly then?
stevenc123 said:
Do you mind to explain how to format it correctly then?
Click to expand...
Click to collapse
Read here http://forum.xda-developers.com/showthread.php?t=1016084 at step five. It is on step by step how to format and partition your card. It has a video showing you exactly.
try this put your htc desire in fastboot mode and instal the ruu and voala the phone is back
sometime ruu flash can't fix usb brick if your misc.img is corrupt
final request for help after this if it doesnt work i will go to htc help center
this will be a video of my problem now, and i still cant get things to work....search um "My android problem" and you will see a guy in grey shirt thats me holding my sadly bricked desire.
Did you tried flashing stock RUU?
If your are still usb bricked after flashing RUU/pb99.img then try the steps below i fix mine that way.
after i unlocked my sd card via fastboot command"fastboot oem enableqxdm 0" sd card recognized by phone and i can browse it via file explorer.
note-you can access your sdcard only via file explorer nothing else so after execute the command download a file explorer from android market.
then i copied the visionary+(it gave me temporary root access which is needed to work this whole thing out).
root explorer,terminal emulator apk and those usb bricked update file(image_flash,mtd0.img) to sdcard from pc via card reader and installed them.
before copy those update file on sd card i edited the mtd0.img to put correct cid n rom info via hex editor.
after that i copied those update file in phone memory
/data/data/ and set permission for r/w and execute via root explorer.
after that i simply typed this command in terminal emulator
"su
/data/data/flash_image misc /data/data/mtd0.img"
Rebooted my phone and voila usb brick is gone htc sync,usb tethering,sd card mount,charge everything is working and now i am rooted and s-off again
Note-you don't need the rageagainstthecage file which only need if you try to get root access via terminal emulator which is lengthy n complicated but with visionary+ you can get root access with 1 click and it's much easier than typing command in T.E.
you are S-OFF
to fix usb brick you do:
fastboot oem enableqxdm 0
fastboot oem eraseconfig
done.
USB-brick fix thread must be updated, lots of S-OFF users struggle with mtd0 method while the fix is just one simple cmd.
dzumagos said:
you are S-OFF
to fix usb brick you do:
fastboot oem enableqxdm 0
fastboot oem eraseconfig
done.
USB-brick fix thread must be updated, lots of S-OFF users struggle with mtd0 method while the fix is just one simple cmd.
Click to expand...
Click to collapse
It's not that simple if your misc.img is corrupted that fast boot command only enable your sd-card if it's blocked it's not gonna fix your corrupted misc.img so i had to flash the pb99.img to get back to stock rom get through the process i described earlier.
well in order to carry out these tasks ill need my phone to be detected by the computer right? I think this is why i cant get into my phone cuz when every i try adb shell it says devices not detected.
That's why you need to do exactly what i did as you are now stuck on stock rom with usb brick.
Thread how to fix usb brick can be found here on xda.
Swyped from my HTC Desire using XDA App
Exiled_SouL said:
It's not that simple if your misc.img is corrupted that fast boot command only enable your sd-card if it's blocked it's not gonna fix your corrupted misc.img so i had to flash the pb99.img to get back to stock rom get through the process i described earlier.
Click to expand...
Click to collapse
you didnt get me apparently - it IS that simple
fastboot oem eraseconfig
fixes misc partition, and USB-Brick
only prerequisite is to be S-OFF
dzumagos said:
you didnt get me apparently - it IS that simple
fastboot oem eraseconfig
fixes misc partition, and USB-Brick
only prerequisite is to be S-OFF
Click to expand...
Click to collapse
It seems you didn't get me either.i was usb bricked twice on s-off device first time that command worked but second time it didn't that's why i had to unroot it and go through this long process.there are other people like me who was s-offed but that fastboot command didn't work for them either for some reason.any way lets stop the arguing here it's not gonna help the thread starter.it worked for you fine but it didn't work for me second time
stevenc123 said:
well in order to carry out these tasks ill need my phone to be detected by the computer right? I think this is why i cant get into my phone cuz when every i try adb shell it says devices not detected.
Click to expand...
Click to collapse
Don't type adb shell, just fastboot enable etc etc. in once, in that way it won't work
ps: you still have to do the cd C:/android-sdk etc.
But if you go into fasboot and if it says fastboot usb after connecting it's no problem just do what i said than
I've got some hardware issues that need to be fixed/replaced and I'd like to unroot the device completely before I take it to the store. I followed the tutorials on here that had me use the unrevoked forever S-ON tool (yes, I rooted using unrevoked forever). The step that comes after that is where I'm stuck.
I move the PC36IMG zip file onto my SD card but get varying errors. When I used the one that was linked on the tutorial, I get an error somewhere along the lines of "file is an old version." I did some searching and found a list of radio versions and downloaded the ROM that matched mine. I renamed it PC36IMG and continued but after the phone loads it up in HBOOT, it just goes back to the main screen. It actually tries to load it, says "checking PC36IMG," and then goes back to the menu with FASTBOOT, RECOVERY, etc.
What am I doing wrong? Are these ROMs not the ones that I should be using? I tried to reroot the device (turning S-OFF) so that I can manually flash it but unrevoked won't recognize my device. If there's another file I should use, please let me know.
HBOOT-2.10.0001
Radio-2.15.00.11.19
I used Supersonic_3.70.651.1-Odexed_signed_teshxx.zip this last time.
No help?
Posted via Tapatalk. :3
If you're s-on, you just need to flash a 3.70 RUU.
From my dropbox > http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip
Rename to PC36IMG, place on the root of your sd card, flash in the bootloader.
What exactly do you mean by "flash in the bootloader?" I was under the impression that I only had to put it in my SD card and star up the device in HBOOT mode and it would ask to flash it. Is this what you mean? I tried doing this with your file and the same thing happened (loaded PC36IMG, "checked" it, and then went back to the HBOOT screen.
felix0890 said:
What exactly do you mean by "flash in the bootloader?" I was under the impression that I only had to put it in my SD card and star up the device in HBOOT mode and it would ask to flash it. Is this what you mean? I tried doing this with your file and the same thing happened (loaded PC36IMG, "checked" it, and then went back to the HBOOT screen.
Click to expand...
Click to collapse
If you renamed the file to PC36IMG, it should have scanned it, and then ask to yo apply an update, in which you would use the power button to select yes, then again to reboot.
felix0890 said:
What exactly do you mean by "flash in the bootloader?" I was under the impression that I only had to put it in my SD card and star up the device in HBOOT mode and it would ask to flash it. Is this what you mean? I tried doing this with your file and the same thing happened (loaded PC36IMG, "checked" it, and then went back to the HBOOT screen.
Click to expand...
Click to collapse
HBOOT=Bootloader
Maybe you should try using the RUU method, which requires running the ROM Update Utility from a computer, with your device connected in USB Debugging mode.
Links to the latest RUU and PC36IMG.zip can be found in this post: http://forum.xda-developers.com/showpost.php?p=17206283&postcount=5
It's possible your SD card is partially corrupted, which would explain why the bootloader won't recognize the PC36IMG.zip.
Captain_Throwback said:
HBOOT=Bootloader
Maybe you should try using the RUU method, which requires running the ROM Update Utility from a computer, with your device connected in USB Debugging mode.
Links to the latest RUU and PC36IMG.zip can be found in this post: http://forum.xda-developers.com/showpost.php?p=17206283&postcount=5
It's possible your SD card is partially corrupted, which would explain why the bootloader won't recognize the PC36IMG.zip.
Click to expand...
Click to collapse
If we wana throw in the potential sd card not being seen, I raise you this > http://forum.xda-developers.com/showthread.php?t=695243
Just boot into the bootloader, connect to the pc with fastboot select, then run the fastboot command via adb from command prompt.
teh roxxorz said:
If we wana throw in the potential sd card not being seen, I raise you this > http://forum.xda-developers.com/showthread.php?t=695243
Just boot into the bootloader, connect to the pc with fastboot select, then run the fastboot command via adb from command prompt.
Click to expand...
Click to collapse
In that case, it'd probably be easier to use this, then: http://forum.xda-developers.com/showthread.php?p=18286127
Ok so I went back and redownloaded the zip file and put it in my SD card to make there wasn't any corruption in the process and it worked. It did the update and all that good stuff. I had done the S-ON process before this so does that mean I'm 100% unrooted and the techs at the store won't know I ever was? I've already gone and deleted any traces of root apps on my SD card as well.
Thanks to you both.
felix0890 said:
Ok so I went back and redownloaded the zip file and put it in my SD card to make there wasn't any corruption in the process and it worked. It did the update and all that good stuff. I had done the S-ON process before this so does that mean I'm 100% unrooted and the techs at the store won't know I ever was? I've already gone and deleted any traces of root apps on my SD card as well.
Thanks to you both.
Click to expand...
Click to collapse
If you're S-ON and stock, then you're good to go!
Captain_Throwback said:
HBOOT=Bootloader
Maybe you should try using the RUU method, which requires running the ROM Update Utility from a computer, with your device connected in USB Debugging mode.
Links to the latest RUU and PC36IMG.zip can be found in this post: http://forum.xda-developers.com/showpost.php?p=17206283&postcount=5
It's possible your SD card is partially corrupted, which would explain why the bootloader won't recognize the PC36IMG.zip.
Click to expand...
Click to collapse
Just wanted to thank you for this file, Had the same problem and this is the only method that worked.
Hi! I have this big problem: my Desire HD blocked in the bootloader menu while I was trying to downgrade the software from 2.3.5 to a Froyo version.
I removed the battery, inserted it back, but the phone freezed when the HTC logo showed up.
I tried to enter the bootloader, then I remembered that I had forgot to disable Fast Boot.
What can I do in order to downgrade?
My phone won't start and I can't enter bootloader menu, too.
Vladish said:
Hi! I have this big problem: my Desire HD blocked in the bootloader menu while I was trying to downgrade the software from 2.3.5 to a Froyo version.
I removed the battery, inserted it back, but the phone freezed when the HTC logo showed up.
I tried to enter the bootloader, then I remembered that I had forgot to disable Fast Boot.
What can I do in order to downgrade?
My phone won't start and I can't enter bootloader menu, too.
Click to expand...
Click to collapse
If you're comfortable with ADB, and you had USB Debugging enabled you should be able to get to recovery with the command
Code:
adb reboot recovery
Good Luck!
UrticantOwl said:
If you're comfortable with ADB, and you had USB Debugging enabled you should be able to get to recovery with the command
Code:
adb reboot recovery
Good Luck!
Click to expand...
Click to collapse
i think taking out battery disables the debugging mode ... not confirm though ...
[/COLOR]
UrticantOwl said:
If you're comfortable with ADB, and you had USB Debugging enabled you should be able to get to recovery with the command
Code:
adb reboot recovery
Good Luck!
Click to expand...
Click to collapse
If that doesn't work, remove your sd card, place it in a reader (or another phone or whatever), and copy a PD98IMG file onto it. Don't place it in a folder or anything, just straight onto the sd card. Then place your sd card back into your phone, and reboot into bootloader (volume down + lock button). Wait a while while it installs, and itll reboot into your working DHD
mhamdy19 said:
[/COLOR]
If that doesn't work, remove your sd card, place it in a reader (or another phone or whatever), and copy a PD98IMG file onto it. Don't place it in a folder or anything, just straight onto the sd card. Then place your sd card back into your phone, and reboot into bootloader (volume down + lock button). Wait a while while it installs, and itll reboot into your working DHD
Click to expand...
Click to collapse
Hi guys, i have the same problem so i'll try your solution. The result will be here. Anyway thanks for the idea.
q995 said:
Hi guys, i have the same problem so i'll try your solution. The result will be here. Anyway thanks for the idea.
Click to expand...
Click to collapse
And here's another, more comprehensive method.
http://forum.xda-developers.com/showthread.php?t=1054304
Sent from my HTC Desire HD using xda premium
Good Day, first time posting so here is the huge problem i have.
1 - My power button no longer works
2 - No ROM installed
3 - Vol buttons work
So due to an error on my part i wiped my system , data, delv/cache , and because i was rushing i rebooted the phone before installing the new rom. Now normally i would just boot into recovery and flash a rom, but my power button no longer works. I can get into download mode if the phone dies by holding vol down and plugging into a pc, and such can use fastboot commands, but with no Rom i cant get USB debugging to use "adb reboot recovery" . Is there anyway that i can get into recovery or a way to flash stock recovery, system and such. thanks in advance.
Bloodx32 said:
Good Day, first time posting so here is the huge problem i have.
1 - My power button no longer works
2 - No ROM installed
3 - Vol buttons work
So due to an error on my part i wiped my system , data, delv/cache , and because i was rushing i rebooted the phone before installing the new rom. Now normally i would just boot into recovery and flash a rom, but my power button no longer works. I can get into download mode if the phone dies by holding vol down and plugging into a pc, and such can use fastboot commands, but with no Rom i cant get USB debugging to use "adb reboot recovery" . Is there anyway that i can get into recovery or a way to flash stock recovery, system and such. thanks in advance.
Click to expand...
Click to collapse
Have tried an ruu? I suggest using the sdcard method. Safest.
andybones said:
Have tried an ruu? I suggest using the sdcard method. Safest.
Click to expand...
Click to collapse
i havent tried that, i thought i need stock recovery and to relock the bootloader for RUU, can you explain "SD card method" .
Bloodx32 said:
i havent tried that, i thought i need stock recovery and to relock the bootloader for RUU, can you explain "SD card method" .
Click to expand...
Click to collapse
No you don't need to lock bl. Or need stock recovery, That's outdated info.
Sure:
Download the RUU.zip file. Rename the zip file to 2PS6IMG.zip (being careful that you have file extensions turned on, or are aware that it could be renamed to 2PS6IMG.zip.zip, which is bad) Copy 2PS6IMG.zip to root of a physical SD formatted to fat32 or exfat! No internal storage!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
andybones said:
No you don't need to lock bl. Or need stock recovery, That's outdated info.
Sure:
Download the RUU.zip file. Rename the zip file to 2PS6IMG.zip (being careful that you have file extensions turned on, or are aware that it could be renamed to 2PS6IMG.zip.zip, which is bad) Copy 2PS6IMG.zip to root of a physical SD formatted to fat32 or exfat! No internal storage!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
Click to expand...
Click to collapse
thanks alot, i will give this a try. i can just get the latest RUU from HTC website and be fine right?
Bloodx32 said:
thanks alot, i will give this a try. i can just get the latest RUU from HTC website and be fine right?
Click to expand...
Click to collapse
Absolutely. Are you soff or son?
If son Id have to double check about locking bl but I'm quite sure that's very old info, and ruu has the stock recovery and just overwrites w.e you have
And soff you 100% don't need to mess w anything.
I'm soff/locked bl and flash ruu all the time. :good:
HTC website may even have directions but not sure.
RUU wiil wipe internal ste
andybones said:
Absolutely. Are you soff or son?
If son Id have to double check about locking bl but I'm quite sure that's very old info, and ruu has the stock recovery and just overwrites w.e you have
And soff you 100% don't need to mess w anything.
I'm soff/locked bl and flash ruu all the time. :good:
HTC website may even have directions but not sure.
RUU wiil wipe internal ste
Click to expand...
Click to collapse
i am s-on
Bloodx32 said:
i am s-on
Click to expand...
Click to collapse
Oh shoot I was thinking backwards, sorry. You need be stock ruu to turn from soff to son.
You can flash ruu np son, but it must match your cid/mid - Carrier ID / Mosel ID.
well its like a brick now anyway, im not sure if i did the CID "111111" , something like that a long time ago. well ill see what i can do, thanks for all your help
Bloodx32 said:
well its like a brick now anyway, im not sure if i did the CID "111111" , something like that a long time ago. well ill see what i can do, thanks for all your help
Click to expand...
Click to collapse
That's "SuperCID" and iirc you need soff to achieve, I have it as well set to that. It allows you to flash any ruu to your device.
Very welcome, mention me if you are in need of anything else.
andybones said:
That's "SuperCID" and iirc you need soff to achieve, I have it as well set to that. It allows you to flash any ruu to your device.
Very welcome, mention me if you are in need of anything else.
Click to expand...
Click to collapse
so i just tried "fastboot flash zip ruu.zip" and got security error , so i did "fastboot oem lock" but now i cant lock the bootloader cuz i cant press power to confirm, i will try to put it on the SD card and try to see if it'll auto flash. but other than that any other ideas? just for educational know how, im planning on ordering new a new power/vol flex cable anyway.
Bloodx32 said:
so i just tried "fastboot flash zip ruu.zip" and got security error , so i did "fastboot oem lock" but now i cant lock the bootloader cuz i cant press power to confirm, i will try to put it on the SD card and try to see if it'll auto flash. but other than that any other ideas? just for educational know how, im planning on ordering new a new power/vol flex cable anyway.
Click to expand...
Click to collapse
Dang yea I think you did f need the vol for SD method... Shoot.
But you don't need to lock bl..
That's not correct line: you need to be in rebootRUU mode.
I'm just gunna copy and paste this from vzw thread, applies to all.
"Option 1
Download the RUU.zip file. Rename the zip file to 2PS6IMG.zip (being careful that you have file extensions turned on, or are aware that it could be renamed to 2PS6IMG.zip.zip, which is bad) Copy 2PS6IMG.zip to root of a physical SD formatted to fat32 or exfat! No internal storage!
Reboot phone to download mode and follow prompts once RUU is detected by phone.
Option 2
EXE option. Download EXE file below (for windows) and simply double click to start. You can either be booted to OS with USB debugging enabled OR booted into download mode for this to start.
Option 3
Fastboot RUU mode . This method assumes you have a working ADB/Fastboot directory on your PC. Download RUU zip file and place in your working fastboot/adb directory. Boot your phone to download mode and connect to PC. Issue the following commands.
htc_fastboot oem rebootRUU
###while in this mode your phone will display an HTC logo on the screen
htc_fastboot flash zip 2PS6IMG.zip
##while in this mode you will see an HTC logo on the screen and a green status bar across the bottom of the screen. When command output ##completes it may say reboot required to flush etc... if that's the case issue a "htc_fastboot reboot-bootloader" command and restart option 1 again.
## assuming flash completes and no further flushing/reboots are requested from the cmd output you can now reboot IF you simply wish to reboot the system you can issue "htc_fastboot reboot" which will reboot system.
## expect a good 5 minute plus first boot!"