USB Brick and brick sdcard, please help - Desire Q&A, Help & Troubleshooting

USB Brick and brick sdcard, please help

Hi
Maybe giving a bit more detail about what happened to get the usb/sd bricked would help people to reply you

My device is connected to the PC does not recognize the Android and the recovery. currently no driver error: "Qualcomm CDMA Technologies MSM"
(Sorry for my English which should not be used goolge translate)

Do you have ROOT??
I unbricked my Desire yesterday so I know how to do it (only with ROOT).

Just download the correct RUU for your region from one of the post in this forum. Connect the USB cable, run the RUU exe and it flash your phone back to the OTA ROM.

I was put on the original room and then proceed boot, successfully run the STEP1, STEP2, but to the error can not enter the recovery

yolkie said:
Just download the correct RUU for your region from one of the post in this forum. Connect the USB cable, run the RUU exe and it flash your phone back to the OTA ROM.
Click to expand...
Click to collapse
Rom I downloaded OTA and it still can not root, and do not receive equipment, including sdcard

Maybe have a look here: (good q+a)
http://forum.xda-developers.com/showthread.php?t=749551
edit: also to this usb brick fix:
http://forum.xda-developers.com/showthread.php?t=691639
with kind regards..Alex

yolkie said:
Just download the correct RUU for your region from one of the post in this forum. Connect the USB cable, run the RUU exe and it flash your phone back to the OTA ROM.
Click to expand...
Click to collapse
His computer don't have connection with phone. It's BRICK, so how he can use RUU?????
lanh_lung do you have ROOT(modified recovery)???

edit: also to this usb brick fix:
http://forum.xda-developers.com/showthread.php?t=691639
with kind regards..Alex[/QUOTE]
My Desire is: T-Mobile have to follow steps on it?

lanh_lung said:
edit: also to this usb brick fix:
http://forum.xda-developers.com/showthread.php?t=691639
with kind regards..Alex
Click to expand...
Click to collapse
My Desire is: T-Mobile have to follow steps on it?[/QUOTE]
Champion ... no matter if your Desire is or not operator ...
Had the same problem and I was able to retrieve the roles of USB and SD Card making the procedures described in the tutorial past links above ...
Read carefully and make with calm ...You'll see that it is not as difficult as it sounds!
Good luck!

lanh_lung do you have ROOT(modified recovery)???[/QUOTE]
step2 I can not run because of the driver error: "Qualcomm CDMA Technologies MSM"

lanh_lung said:
USB Brick and brick sdcard, please help
Click to expand...
Click to collapse
it's very strange, I have exactly the same problem since yesterday!

SD Card brick is resolved by this command in fastboot mode :
fastboot oem enableqxdm 0
But USB Brick is not resolved and my phone no longer root how can I do? I tried unsuccessfully Z4 root, is there another software to root without USB?

My capital is very little English, I did follow the instructions at the link:http://forum.xda-developers.com/showthread.php?t=691639. But it is not possible, please provide detailed guidance and may include images is very good.
(Each charge to just plug the cable and reboot the machine to receive a new charger)

Hi, I had the Same Problems some Minutes ago. (I was using the new AmonRA Recovery to flash a new ROM).
Here are the Steps what I have done to solve my problem (Rooted ROM is required):
1.) Download Android SDK -> Then open a comand Line and change into the Tools Directory:
cd path\to\AndroidSDK\tools
2.) You need to know your CID.
Turn your Phone into fastboot mode (Pressing Back and Power On). Then in your Comand Line do:
fastboot oem boot
The log will say something like the following:
CODE
.
.
.
#INFOCID is T-Mob101
In this specific case, the CID is T-Mob101.
3.) Get and extract the the attached Rescue.zip File.
Open the File "misc.img" in a hex Editor of your Choice and change "T-MOB101" to your CID
3.) Turn your Phone again into fastboot mode (Pressing Back and Power On) then go to your Command Line and do:
fastboot oem enableqxdm 0 (This will enable your SD Card to be seen in your favorite explorer on your phone)
then "Reboot"
4.) Then get the two files to your SD-Card (email them or dropbox them or what ever).
5.) Open a Terminal Emulator (http://www.appbrain.com/app/android-terminal-emulator/jackpal.androidterm) on our Phone
enter:
su (Enter to get Superuser Rights)
cat /sdcard/flash_image > /data/flash_image (this will copy the file to /data, therefore you need root!)
cat /sdcard/misc.img > /data/misc.img (this will copy the file to /data, therefore you need root!)
chmod 755 /data/flash_image (this makes the file "flash_image" executable)
/data/flash_image misc /data/misc.img (this will execute flash_image the result will be that you overwrite your misc section)
Reboot.
Everything should be ok

Ok this is a bit weird cos my usb got bricked yesterday too but a lot of searching i have managed to get it sorted. i lost root too so used this method http://forum.xda-developers.com/showpost.php?p=9056719&postcount=15 its similar to the above but for people who have lost root.
I've already re rooted and back on my leedroid2.2b

Guys can i just ask if your usb got bricked after you s-offed your desire and upgraded to the new amon ra recovery

I "S-OFF'ed" my Device some Time ago without any Problems. Today I flashed the new AmonRA via Unrevoked. Everthing went fine. After Flashing a new ROM (Oxygen) i had the mentioned USB/SD-Card Problem.
I was able to access my Device via Fastboot and get into Recovery but my SD Card was not able to be mounted anymore. (Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (No such file or directory)).
Also i was stuck in a Bootloop after the "S-OFF Bootlogo".
After "fixing" the SD Card Problem, i was able to Boot the new Rom, access the SD Card via FIle Explorer, but my Device was not recognized properly while connected via USB. Something like "unrecognized Quallcom Device" Driver not found.

Yeah i had similar experience i had i flashed new amon ra via fastboot then backed up my leedroid2.2b rom via rom manager just cos i could rename it easily then booted into amon ra wiped and flashed latest leedroid. On the reboot it decided to reboot on the spalsh screen a few times and then the boot animation started when i booted i realised i had sd problem but wasn't aware of usb so ended up going the long way around

Related

Evo 4g Bricked USB

It starts to read the pc36img but then goes to the main page. doesnt let me choose to update or not. Im stuck at 1.47. I bricked it last night and lost sd card and usb. I got the sd card working but not the usb. It need me to use terminal and issue su command but permission denied. I made the mistake of going back to stock and updating to the newest ota. I was thinking the ota update would fix my sd card but it didnt. I have clockworks mod but it wont work since im not rooted. I can only charge when the phones off and cant use the usb cable to connect to the computer and view files and use adb. I can get into the phone via fastboot but nothing else. My computer does beep when I plug it in but nothing else.
Thanks
My Hboot is 0.79.0000
radio-2.05.00.06.10
1.47.651.1
Not being able to charge has to be the worst thing.
xRepinsSporx said:
It starts to read the pc36img but then goes to the main page. doesnt let me choose to update or not. Im stuck at 1.47. I bricked it last night and lost sd card and usb. I got the sd card working but not the usb. It need me to use terminal and issue su command but permission denied. I made the mistake of going back to stock and updating to the newest ota. I was thinking the ota update would fix my sd card but it didnt. I have clockworks mod but it wont work since im not rooted. I can only charge when the phones off and cant use the usb cable to connect to the computer and view files and use adb. I can get into the phone via fastboot but nothing else. My computer does beep when I plug it in but nothing else.
Thanks
Click to expand...
Click to collapse
What OS are you using? I assume windows? Did you install the fastboot drivers? You can push files. But you can also download them via the phone. I would try downgrading the rom then downloading unrevoked 2
rjmjr69 said:
What OS are you using? I assume windows? Did you install the fastboot drivers? You can push files. But you can also download them via the phone. I would try downgrading the rom then downloading unrevoked 2
Click to expand...
Click to collapse
I can download files fine and put them on my sd card. I got that working. Im using windows 7 and I have the drivers. I dont know what or how to get it to work. How do I downgrade from the unrooted 1.47 stock rom. I cant get it to update with the pc36img or get the clockworks to open the update.zip. I cant even charge the phone when its on.
Heres the usb fix instructions but i cant root the device so i cant get it to work.
Fix USB
Press & hold vol down and power on the phone
Select fastboot by pressing the power button
Make sure in device manager the driver is installed(Win 7 x64 downloaded them automatically)
Open command prompt like you would to use ADB and type
fastboot oem boot
It will give you a log, look for the line that says INFOCID is SPCS_001, if it says something different, then use the generator below to create one(or hex edit the one I posted)
Download the mtd0.img attached or use this CID generator made by stevebrush over @ Modaco to create a custom one
Download the flash_image attached
Unzip both zips and copy both files to the SD card
Open a terminal emulator(I used ConnectBot) and type
su
cat /sdcard/flash_image > /data/flash_image
cat /sdcard/mtd0.img > /data/mtd0.img
chmod 755 /data/flash_image or chmod u+x /data/flash_image
/data/flash_image misc /data/mtd0.img
reboot
Cant get su access so cant apply the fix. This sucks
ok so when you connect the phone to the computer in Fastboot does windows see it and load the proper driver? You can push files if I am correct via fastboot Maybe you can run the root?
Hook the phone up put it in fastboot usb then look at device manager under android phone
Yes fastboot as been working. Was able to apply the sd fix that way. But I dont know how to fix the usb problem via fastboot. It wonts me to run commands in terminal and i dont have permission.
If I had adb I think i can install the usb fix but cant access the phone via adb. When i plug in phone (turned on) its makes a noice on the computer but cant do adb.
xRepinsSporx said:
If I had adb I can install the usb fix but cant access the phone via adb. When i plug in phone (turned on) its makes a noice on the computer but cant do adb.
Click to expand...
Click to collapse
OIC I'm sorry I did not realize that. I"m sure someone will be able to chime in. Have you tried running the official RUU while its in fastboot? Or have you tried Hboot USB?
tried the official RUU that i ran in the first place but i get a 104 error. version error or something. I put it in Hboot Usb but adb said it couldnt find the device. Not sure if i did it right tho. If i try to run the rooted pc36img files I get a error saying Main Version is older.
Heres some details
My Hboot is 0.79.0000
radio-2.05.00.06.10
1.47.651.1
ok download this file and run it in fastboot
http://www.megaupload.com/?d=VLNPQWL1
After reboot you should have ROOT
Then either download this or try running adb and if you can then I would download simpleroot1 and let it do its job
But here is the eng.pc3 that should work with the main version error
This one SECOND rename it to just delete the eng-
http://www.megaupload.com/?d=VLNPQWL1
ive been trying to get the pc36img file to work. I put it on sd card. then turn off device and turn it back on by pressing the down volume button. it trys to load it and then it either does nothing or gives me the main version is older error. Is this one different. I believe im doing it right. Done it many times before. I just got this phone, had the evo but had to get a replacement. power port broke inside of phone.My luck
rjmjr69 said:
ok download this file and run it in fastboot
http://www.megaupload.com/?d=VLNPQWL1
After reboot you should have ROOT
Then either download this or try running adb and if you can then I would download simpleroot1 and let it do its job
But here is the eng.pc3 that should work with the main version error
This one SECOND rename it to just delete the eng-
http://www.megaupload.com/?d=VLNPQWL1
Click to expand...
Click to collapse
ok ill try
wait rename it to what?
This one SECOND rename it to just delete the eng-
didnt understand that
Thanks for all the help so far.
xRepinsSporx said:
ive been trying to get the pc36img file to work. I put it on sd card. then turn off device and turn it back on by pressing the down volume button. it trys to load it and then it either does nothing or gives me the main version is older error. Is this one different. I believe im doing it right. Done it many times before. I just got this phone, had the evo but had to get a replacement. power port broke inside of phone.My luck
Click to expand...
Click to collapse
Yes its different try it please.
xRepinsSporx said:
wait rename it to what?
This one SECOND rename it to just delete the eng-
didnt understand that
Thanks for all the help so far.
Click to expand...
Click to collapse
REname it to the same as the first but rename the first First to something else lol or delete it all together
rjmjr69 said:
REname it to the same as the first but rename the first First to something else lol or delete it all together
Click to expand...
Click to collapse
nope doesnt work. Still getting the main version error
does adb work when in HBoot usb plug mode
I'm having pretty much the exact same problem. USB bricked EVO on 2.1 without root. Need root to fix the USB, need USB to achieve root. Really hoping for a miracle, here.
i just ran into the same problem i used an auto root to downgrade hboot 2.02 and it dropped it down .0093 after this i lost usb and sd card i got sd card back but have no way to use adb or terminal to get usb back i used an ruu renamed as pc36img to get back to hboot.2.1.001 but still no usb and no way to root to get terminal to work any ideas?
i am having the same problem here too. doesnt look like there is a solution?
Sd card not workin'
Hey man, I borked my EVO 4g too... What did you do to fix the sd from not being able to be mounted? I can only get into bootloader and recovery... And I heard that if yu can get into either of those, the phone i fixable... Any help, please?

[Q] Bricked Desire? Could use some help here :P

Hi guys,
Well basically, I've been a massive idiot and somehow my HTC Desire is now non-responsive. I am running the Oxygen rom from a nandroid backup that I had done previously but now i am unable to access recovery at all. The phone does power on. I do the usual power + back button hold to get into the bootloader then recovery and do the usual ./recovery-mac.sh command in terminal but all I get in response is this now:
mac:~ Dan$ ./recovery-mac.sh
Desire Recovery Mode
Pushing required files to device...
Password:
error: device not found
error: device not found
mac:~ Dan$ error: device not found
I can access the MicroSD card through a computer but the phone won't recognize there is one. WiFi works (but can't download anything from market), radio doesn't as no signal and of course 3G is out of the question.
Is there a solution to my problem?!
From a person in dying need.
EDIT:
Since trying to work this out I have reformatted the microSD card and replaced its contents afterwards, still to no avail.
Try to flash stock ROM from here: http://forum.xda-developers.com/showthread.php?t=695667
Be careful to select the appropriate RUU.
Turn your phone in fastboot (back + power) and run the exe file. You very probably might need a goldcard. Search the forum for that. Good luck !
you're going to have to talk me through this (step by step) like i'm an idiot please paul! i've downloaded the appropriate RUU but i'm not sure how to apply it. help?
guywithdesire1992 said:
you're going to have to talk me through this (step by step) like i'm an idiot please paul! i've downloaded the appropriate RUU but i'm not sure how to apply it. help?
Click to expand...
Click to collapse
Start your phone in fastboot --> Hold Back button + press power
You should get a menu which has as title FASTBOOT.
Connect your phone to your PC and then run the exe file. You must have HTC Sync installed.
If this fails try making a goldcard. You can find a tutorial here: http://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
the computer won't recognise the phone paul. am going to have to try and make a goldcard i guess. :/
okay i am completely stuck. i have previously made a goldcard but this is just ridiculous now. my sdcard contains the clockwork mod folder so why can't i boot into recovery, what is going wrong with it? if i boot up i'm stuck on the oxygen rom, cant install anything as wifi wont download stuff as sd card isnt recognized (tell me why?), have sporadic signal, no 3g whatsoever.
can someone please explain step by step how to get recovery working again.
bumpbumpbump
So whats your current status?
Your Desire boots into ROM, but doesnt work well.
You cannot but into recovery.
You made a gold card.
Flashing a RUU didnt work.
Your SD is not recognized by the phone or by PC? Is it the goldcard you made?
Correct?
i haven't been able to make a goldcard, i have one previously that i cannot find.
the desire boots into the oxygen rom, ver. 2.0.3 but will not recognise the sd card inserted and wont connect to a mac or computer and show up as a device. i cannot boot into recovery at all as i just get device not found.
confused?
guywithdesire1992 said:
confused?
Click to expand...
Click to collapse
yes ^^
Do you only use Mac or have you access to a pc, too?
If you can get your phone into USB Debugging mode, you can try to flash a brand new recovery via fastboot command.
Maybe your rom got corrupted somehow.
If neither of this works, you should try another sd card I guess.
how do you use the fastboot command?
i have used the ./recovery-mac.sh command in terminal but whats this fastboot command and where can i get it?
EDIT:
I now have fastboot but whenever i try the command ./fastboot-mac flash recovery.img it ends up saying permission denied. is this because i am S-ON?
k-c-0 said:
yes ^^
Do you only use Mac or have you access to a pc, too?
Click to expand...
Click to collapse
i have access to a pc as well too. i'd rather not have to go through the lengthy process of making a goldcard if i have to. trying to exhaust all other options first....

I have a Bricked Desire seeking help

I was trying to flash a insertcoin ROM the other day and i failed to do so. I then just kept trying to flash the same file and wiping my cache and stuff in recovery. Then i tried another ROM but still didnt work; i formatted my sd card and after that when in recovery my phone says fail to mount sd card dev/......so on so on. I think my problem is that i have a screwed up OS im not too sure. i hope some experts can give me some suggestions to solve this problem thank you
stevenc123 said:
I was trying to flash a insertcoin ROM the other day and i failed to do so. I then just kept trying to flash the same file and wiping my cache and stuff in recovery. Then i tried another ROM but still didnt work; i formatted my sd card and after that when in recovery my phone says fail to mount sd card dev/......so on so on. I think my problem is that i have a screwed up OS im not too sure. i hope some experts can give me some suggestions to solve this problem thank you
Click to expand...
Click to collapse
It's one of two possibilities:
1) You've usb bricked your device. To solve try this: http://forum.xda-developers.com/showthread.php?t=691639&highlight=usb+brick
2) Mis-formatted SD. SD has to have one FAT partition (first) and a second ext3/4 partition. Both have to be primary.
Do you mind to explain how to format it correctly then?
stevenc123 said:
Do you mind to explain how to format it correctly then?
Click to expand...
Click to collapse
Read here http://forum.xda-developers.com/showthread.php?t=1016084 at step five. It is on step by step how to format and partition your card. It has a video showing you exactly.
try this put your htc desire in fastboot mode and instal the ruu and voala the phone is back
sometime ruu flash can't fix usb brick if your misc.img is corrupt
final request for help after this if it doesnt work i will go to htc help center
this will be a video of my problem now, and i still cant get things to work....search um "My android problem" and you will see a guy in grey shirt thats me holding my sadly bricked desire.
Did you tried flashing stock RUU?
If your are still usb bricked after flashing RUU/pb99.img then try the steps below i fix mine that way.
after i unlocked my sd card via fastboot command"fastboot oem enableqxdm 0" sd card recognized by phone and i can browse it via file explorer.
note-you can access your sdcard only via file explorer nothing else so after execute the command download a file explorer from android market.
then i copied the visionary+(it gave me temporary root access which is needed to work this whole thing out).
root explorer,terminal emulator apk and those usb bricked update file(image_flash,mtd0.img) to sdcard from pc via card reader and installed them.
before copy those update file on sd card i edited the mtd0.img to put correct cid n rom info via hex editor.
after that i copied those update file in phone memory
/data/data/ and set permission for r/w and execute via root explorer.
after that i simply typed this command in terminal emulator
"su
/data/data/flash_image misc /data/data/mtd0.img"
Rebooted my phone and voila usb brick is gone htc sync,usb tethering,sd card mount,charge everything is working and now i am rooted and s-off again
Note-you don't need the rageagainstthecage file which only need if you try to get root access via terminal emulator which is lengthy n complicated but with visionary+ you can get root access with 1 click and it's much easier than typing command in T.E.
you are S-OFF
to fix usb brick you do:
fastboot oem enableqxdm 0
fastboot oem eraseconfig
done.
USB-brick fix thread must be updated, lots of S-OFF users struggle with mtd0 method while the fix is just one simple cmd.
dzumagos said:
you are S-OFF
to fix usb brick you do:
fastboot oem enableqxdm 0
fastboot oem eraseconfig
done.
USB-brick fix thread must be updated, lots of S-OFF users struggle with mtd0 method while the fix is just one simple cmd.
Click to expand...
Click to collapse
It's not that simple if your misc.img is corrupted that fast boot command only enable your sd-card if it's blocked it's not gonna fix your corrupted misc.img so i had to flash the pb99.img to get back to stock rom get through the process i described earlier.
well in order to carry out these tasks ill need my phone to be detected by the computer right? I think this is why i cant get into my phone cuz when every i try adb shell it says devices not detected.
That's why you need to do exactly what i did as you are now stuck on stock rom with usb brick.
Thread how to fix usb brick can be found here on xda.
Swyped from my HTC Desire using XDA App
Exiled_SouL said:
It's not that simple if your misc.img is corrupted that fast boot command only enable your sd-card if it's blocked it's not gonna fix your corrupted misc.img so i had to flash the pb99.img to get back to stock rom get through the process i described earlier.
Click to expand...
Click to collapse
you didnt get me apparently - it IS that simple
fastboot oem eraseconfig
fixes misc partition, and USB-Brick
only prerequisite is to be S-OFF
dzumagos said:
you didnt get me apparently - it IS that simple
fastboot oem eraseconfig
fixes misc partition, and USB-Brick
only prerequisite is to be S-OFF
Click to expand...
Click to collapse
It seems you didn't get me either.i was usb bricked twice on s-off device first time that command worked but second time it didn't that's why i had to unroot it and go through this long process.there are other people like me who was s-offed but that fastboot command didn't work for them either for some reason.any way lets stop the arguing here it's not gonna help the thread starter.it worked for you fine but it didn't work for me second time
stevenc123 said:
well in order to carry out these tasks ill need my phone to be detected by the computer right? I think this is why i cant get into my phone cuz when every i try adb shell it says devices not detected.
Click to expand...
Click to collapse
Don't type adb shell, just fastboot enable etc etc. in once, in that way it won't work
ps: you still have to do the cd C:/android-sdk etc.
But if you go into fasboot and if it says fastboot usb after connecting it's no problem just do what i said than

need to flash but phone not detecting SD card

Hi,
I needed to flash a ROM onto my phone (prev using leedroid), however as I was going about this process (after I had backed everything up using clockworkmod recovery, and begun wiping), the phone stopped detecting my SD card
this card had been working fine for well over a year before. now error in recovery is something like E: unable to mount xxxx
it is detected using SD card reader on computer, and I have tried re-partitioning it to no avail
now the phone can boot into recovery and also the rom, but the SD card isnt detected in either, and neither now is the SIM card.
normally I would search extensively for a solution myself before posting, but I have done as much as I can, in my current situation I have no WIFI, only an internet dongle with very slow connection.
currently I assume that there is a problem with the radio but I have not had experience flashing this without using SD card in recovery
also, due to the risks involved with flashing radio, I would prefer to try to flash a new rom first, but again I have no experience flashing a new rom without SD card in recovery.
I have adb installed on my computer but not much experience using it.
Sorry for all this, but I am not the kind of guy who flashes roms regularly, the last time I did it was a while ago, and cant really remember how I rooted in the first place (I think I used unrevoked) - therefore uncertain of S-off status - although not sure what the significance of this is
please help i dont know what to do
thanks
This is what you need to do (instructions I wrote for myself in case I ever broke it again) :-
To gain access to SD card:
Put phone into fastboot mode (back button + power)
In CMD, go to dir C:\Android\android-sdk\Tools
Type: path C:\Android\android-sdk\Platform-tools)
Input "fastboot oem enableqxdm 0"
You'll need the Android SDK and once installed (along with the updated USB drivers that are available in the updates it finds) I discovered that 'Fastboot' was in a different directory to ADB so attempting to run Fastboot failed as it couldn't find ADB. My cure was to create a path to the ADB directory (as listed above). Be sure to change the path and directories to wherever you install them.
Alternatively (and far easier) search for 'Android Flasher' which is available on these forums. This has fastboot and adb installed in the same directory and is a much, much smaller download and run the above command from a CMD prompt from the directory that fastboot and adb reside in wherever you install Android Flasher to. I've never tried it this way but no reason why it shouldn't work and far easier than getting the whole SDK thing!
Yep confirmed, Android Flasher will do it. A quick search should find the program, it's a very small download compared to downloading the Android-SDK (and the Java runtime module it requires). Simply change directory in CMD to c:\your android flasher dir\data directory and run that command from there with the phone plugged in and running fastboot, fixed.
Here you go :- http://forum.xda-developers.com/showthread.php?t=794638&highlight=android+flasher
Ignore the S-Off bit, that's to do with the functions of the flasher itself, we're not actually using that.
thanks so much guys, that sorted the problem right out (used AndroidFlasher)
after reflashing the ROM, the problems with the SIM went away, so no need to flash new radio!
Guys same problem here
I backed up, I changed my sd card to an 32gb, restored but then i had the "Can’t mount /dev/block/mmcblk0p1" problem
I solved the problem with your solution (fastboot oem enableqxdm 0) then full wipe then reinstall rom
But now windows can't see my device. On my phone there is no popup menu to ask me what do i want to do when i connect the usb plug
Also, in recovery, i choose mount USB storage but windows dont see my ds card (4gb or 32gb cards)
What is the problem?
ps
when i connect to windows, device driver installation says: device driver software was not successfully installed.
It also listes "Qualcomm CDMA Technologies MSM No driver found" 3 times
Check if it's working with another sd card.
TouchPaled from Oxygen with Transparent XDA App
iceman1979 said:
Guys same problem here
I backed up, I changed my sd card to an 32gb, restored but then i had the "Can’t mount /dev/block/mmcblk0p1" problem
I solved the problem with your solution (fastboot oem enableqxdm 0) then full wipe then reinstall rom
But now windows can't see my device. On my phone there is no popup menu to ask me what do i want to do when i connect the usb plug
Also, in recovery, i choose mount USB storage but windows dont see my ds card (4gb or 32gb cards)
What is the problem?
ps
when i connect to windows, device driver installation says: device driver software was not successfully installed.
It also listes "Qualcomm CDMA Technologies MSM No driver found" 3 times
Click to expand...
Click to collapse
I'm afraid you have what is known as a USB brick, the fact that it asks for the Qualcomm drivers confirms it. Do a search on the forum, there is a fix for it.
Ah here it is :- http://forum.xda-developers.com/showthread.php?t=691639
Life-Saver.
Thanks
I've given you a 'thanks' also for replying to mine. It's a bad road to go down with the USB brick but it's something that everyone playing with rom's should experience as it educates you so much when things go wrong!
Glad you sorted it m8.
Parva4 said:
This is what you need to do (instructions I wrote for myself in case I ever broke it again) :-
To gain access to SD card:
Put phone into fastboot mode (back button + power)
In CMD, go to dir C:\Android\android-sdk\Tools
Type: path C:\Android\android-sdk\Platform-tools)
Input "fastboot oem enableqxdm 0"
You'll need the Android SDK and once installed (along with the updated USB drivers that are available in the updates it finds) I discovered that 'Fastboot' was in a different directory to ADB so attempting to run Fastboot failed as it couldn't find ADB. My cure was to create a path to the ADB directory (as listed above). Be sure to change the path and directories to wherever you install them.
Alternatively (and far easier) search for 'Android Flasher' which is available on these forums. This has fastboot and adb installed in the same directory and is a much, much smaller download and run the above command from a CMD prompt from the directory that fastboot and adb reside in wherever you install Android Flasher to. I've never tried it this way but no reason why it shouldn't work and far easier than getting the whole SDK thing!
Click to expand...
Click to collapse
you "saved my life" thank you so much
hi,just got a dhd s-on.but its not detecting the s card,tried the above method but i just get waiting for device ?... can get into fastboot etc,but cant get rid of the usb brick.looks like the dhd is stopping on stock sense 3.0
markb63 said:
hi,just got a dhd s-on.but its not detecting the s card,tried the above method but i just get waiting for device ?... can get into fastboot etc,but cant get rid of the usb brick.looks like the dhd is stopping on stock sense 3.0
Click to expand...
Click to collapse
You have a Desire HD. So please ask in the forum for Desire HD and not in the one for the Desire.
MatDrOiD said:
You have a Desire HD. So please ask in the forum for Desire HD and not in the one for the Desire.
Click to expand...
Click to collapse
yep,i have a desire bravo as well,was looking to sort the dhd out,could not find anything on dhd threads... thanks for your help ..

[Q] Brick? USB brick? What to do?

Hi,
Today I backed up my mobile ( using amon ra ), partitioned new SD card and placed backup back. All succesful, then my phone got a boot animation loop. Got battery out and tried to flash the ROM again ( insertcoin stable ). Then It can't read my SD card anymore! The error was: E: Can't mount /dev/block/mmcblk0p1
I can't flash a ROM anymore, but I wiped my phone after that for trying to flash, didn't work. Now my phone is turned on. It boots with a grey black android logo, and then I get parts of insertcoin. I'm missing a lot of apps and apk's, ( for example the settings and the lockscreen ). So I'm missing a lot.
I can't power my phone when it's on, only when it's off. So please help me!
And explain it as easy as possible.
Search the forums USB Brick -
it will contain the command:
fastboot enableqxdm 0
Marc. said:
Hi,
Today I backed up my mobile ( using amon ra ), partitioned new SD card and placed backup back. All succesful, then my phone got a boot animation loop. Got battery out and tried to flash the ROM again ( insertcoin stable ). Then It can't read my SD card anymore! The error was: E: Can't mount /dev/block/mmcblk0p1
I can't flash a ROM anymore, but I wiped my phone after that for trying to flash, didn't work. Now my phone is turned on. It boots with a grey black android logo, and then I get parts of insertcoin. I'm missing a lot of apps and apk's, ( for example the settings and the lockscreen ). So I'm missing a lot.
I can't power my phone when it's on, only when it's off. So please help me!
And explain it as easy as possible.
Click to expand...
Click to collapse
if you can get to fastboot, you can use: fastboot oem enableqxdm 0
And that's it?
Just turn phone on ( volume down + power ), then power button for fastboot.
Plug it into PC, start adb and then that command?
And then my phone can read USB again?
Edit: SD again?
Edit2: I am in fastboot, but where to put the command?
first cd and then the android-sdk tools folder? ( ADB is not in there, that is in platform-tools )
So what to do?
Phone must say: FASTBOOT USB
You have to put this where your fastboot is located, not the adb (but i have them in one place )
I think it worked, I've done it using the fastboot thing.
Now flashing Insertcoin again Hope it works!!
Ok, got my SD working again, with Insertcoin. But it recognize the computer or anything very late! When connected to the computer or power, it takes a few minutes before it recognize it, the computer even doen't ask for diskdrive or something like that, it only powers... What to do?
Edit: Do I need to do these options too? http://android.modaco.com/topic/309939-usb-brickrickrolledb0rked-fixed/ numbers 3,4,5 and 6?
Bump... Please help, I need my phone tomorrow and I can't miss it.
Marc. said:
Bump... Please help, I need my phone tomorrow and I can't miss it.
Click to expand...
Click to collapse
Try the Android Flasher, I haven't used it but others say it worked for them
http://forum.xda-developers.com/showthread.php?t=794638
Marc. said:
Ok, got my SD working again, with Insertcoin. But it recognize the computer or anything very late! When connected to the computer or power, it takes a few minutes before it recognize it, the computer even doen't ask for diskdrive or something like that, it only powers... What to do?
Edit: Do I need to do these options too? http://android.modaco.com/topic/309939-usb-brickrickrolledb0rked-fixed/ numbers 3,4,5 and 6?
Click to expand...
Click to collapse
Yes you need to flash something as well, and the instructions there may work as a quick fix, but for me if the wrong image is flashed things like bluetooth don't work and other quirks are introduced.
I had to to generate a CID image specific to your variant of the Desire from this site: http://ks25738.kimsufi.com/misc/
The Rom version is irrelevant I think so enter the example on the site.
For "cid", input the following into the terminal (Mac? and Linux):
Code:
fastboot oem boot | grep #INFOCID
You should get a line like:
Code:
#INFOCID is HTC__E11
Which means you enter "HTC__E11" as the CID.
I you're on Windows (why?) or the above doesn't work, forget the pipe (|) and everything that follows and look for "#INFOCID" in the output which should be several lines long.
Put the generated mtd0.img file in the same directory as fastboot (or anywhere if you think you can handle the paths properly) and enter:
Code:
fastboot flash misc mtd0.img
Obviously you need to be in Fastboot USB mode in the bootloader for any of this to work.
For some probably unrelated reason, USB file transfers still don't work for me so I forced to use the Samba Filesharing app from the market.
I got the info from this page: http://forum.xda-developers.com/showthread.php?t=691639
Ok, where can I find the Rom version? And please give the flash of that file in more steps, I don't understand it.
Bump, I really need my phone in a few hours! Please help!
Ok, I'm further.
I have now a few problems with: 3. Get flash_image from the attached files below
Move this to /data/ , and flash the modified image using:
"/data/flash_image misc /data/mtd0.img"
You can move both mtd0.img and flash_image by putting it on your sdcard, and issueing the following command in a terminal emulator:
'cat /sdcard/flash_image > /data/flash_image'
'cat /sdcard/mtd0.img > /data/mtd0.img'
You might have to do 'chmod u+x /data/flash_image' before you run the commands (or chmod 755 /data/flash_image)
4. Repeat step 3 a couple of times if it doesn't seem to work well.
5. All done! Reboot, you should have normal usb connectivity. Post your 'fastboot oem boot' log and intermediate steps if it fails.
I made a mdt0.img using http://ks25738.kimsufi.com/misc/
My cid was HTC__E11
and ROM version 2.36.405.8 and it gave me a mdt0.img file
Now step 3, I don't know how to let it flash... I don't know what to do now with the file... Please help and give everything in simple steps
Follow The Usb brick fix Link On My sig,hope that will solve your problem.
Exiled_SouL said:
Follow The Usb brick fix Link On My sig,hope that will solve your problem.
Click to expand...
Click to collapse
I read it, but a few questions...
( My phone is S-ON )
1. I'm not on a stock rom, but on Insertcoin
2. I can already acces my SD card, so can I skip the first step? Done that yesterday already.
3. Can I use the mtd0.img generator? If yes I have already the file.
4. With step 3, which files must be in /data/data?
5. With step 2, I have super user, so can I use that instead of the root acces thing?
SOLVED!! Thanks everyone!
I read a lot, and its succesful! Diskdrive, wall charching bluetooth EVERYTHING!!!
Thanks everyone! I really appreciate it.

Categories

Resources