Hi pals,
I spend many days to find right rom for Ciphone C6+ and the right instruction for flashing him.
Now i will share with you everything what i found.
Rom can download from here:
WM 6.1 ENGLISH
WM 6.5 ENGLISH big thanks to dmitryxxl
Flashig tool can download from here:
IDT
Instruction:
1.Turn off your phone then press simultaneously “Power key”, “Volume Up” & “Home Key” to switch the phone
to “Download Mode”.
2. Download and install IDT
3. Launch IDT. At the prompt type 'hisilicon' as the password
4. Uncheck VerifyVer box
5. Browse for Image File by pressing '...' and point it to the .bin file that you want to upgrade to , press OK , IDT will ask you to select a platform , select GSM/EGPRS before you press OK ,
6.Connect ciphone via usb to pc , Your computer will install the necessary drivers for USB mode , then press OK buton and IDT will flash your phone.
If USB Drivers not installed automaticly from your PC you must do that manually.
USB Driviers are in C:\Program Files\HiSilicon\IDT\USB generic serial , just show from where must instal them your PC
good version ?
Hi,
I'm french, sorry for my bad english...
I bought a ciphone C6 with a ciphone-4gs processor. there is wm 6.1.
Do you think i can update it with this ROM 6.5 english ..
Best regards
I have tried flash de rom but the program stopped while it was updating… now i can’t put the mobile in dowload mode its only show a black screen. What can i do to put the ‘donwload mode’ screen again??
Hi! Sorry for my bad english...
I have a problem...unfortunately i install c6S rom my c6A phone, so black screen, no download mode
So what can i do to put the donwload mode again??
Thanks the answers
Related
Hi i just bought a i-mate jasjar, it's a g3 device (boot shows 1.01). i just flashed ranju's rom but it freezes on wm6 splashscreen and i dont know what to do, help me please i want a wm6-6.1 ROM!!! thank you so much...
I had the same thing recently caused by not unticking allow USB connection in activesync. I tried to do it 3 times before I realsed what the problem was. I had to use MITY to reset the unit then reflashed the ROM & it was OK.
ken0150 said:
Hi i just bought a i-mate jasjar, it's a g3 device (boot shows 1.01). i just flashed ranju's rom but it freezes on wm6 splashscreen and i dont know what to do, help me please i want a wm6-6.1 ROM!!! thank you so much...
Click to expand...
Click to collapse
read the wiki, you will find all you need to instal roms with no problem
Cheers
Solution
keno0115 it was exactly my case. Here is how I solved:
First flash it back to original jasjar rom (WM5). But to do so:
1- Unhook your jasjar from your computer
2- Untick "USB Connection" in ActiveSync
3- Press light button+power button+reset button to go to bootloader mode
4- plug-in usb cable to hook up to the computer
5- Run JasJar Rom update as usual
6- Hard reset your jasjar to see WM5 is working fine
Then flash it to ranjus rom. To do so:
1- Download http://rapidshare.com/files/36286892/UNI_upgrade_issues_and_solutions.rar
2- Extract Country_Id_Error folder under Rom Unlock folder
3- Extract Ranjus's rom (or any other WM5 or 6 or 6.1 rom) to a folder
4- Copy nk.nbf to the extracted Country_Id_Error folder (step2)
5- Unhook your jasjar from your computer
6- Untick "USB Connection" in ActiveSync
7- Press light button+power button+reset button to go to bootloader mode
8- plug-in usb cable to hook up to the computer
9- Run MaUpgradeUt_noID.exe from Country_Id_Error folder
10- After flashing finished do a hard reset. And wait 2 or so minutes to calibration screen come up.
11- Tick back again "USB connection" in ActiveSync, to use activesync again
Hope that helps.
alpusm
Hi everybody,
I look through the threads and I couldn't find a solution to my troubles. So here it is: I just bought a htc touch pro 2 which came with a window mobile 6.1. Before I transferred anything from my old phone, I thought better to do the official upgrade to 6.5 ROM version 1.86.401.0.
I wanted to flash the ROM through a USB cable as described on the HTC site, but after after having done 22% of the work, everything got stuck. And 5' minutes afterward the update windows on the PC disappeared and I had to disconnect the phone!!!
So now I have a beatiful telephone, which cannot boot up. Indeed, it gets stuck in the 4 colors bootloader.
i) I tried to do a factory reset (pressing power, send hang up buttons) to no avail.
ii) I tried to take out the batteries and pull them in again, then switching on the phone holding down the vol down + power up buttons, then reset.
iii) reconnecting the phone back to the PC by usb, I was never able to get a switch from "serial" to "usb"
Nothing is working, if anybody has an idea what I could try next.... I am wondering if it is possible to flash the phone from the SD card. I am really a newbie here.
Thanks
Max
Yea .. same thing happened to me ..
Check Here For Full Info: Click Here
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it)
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Good Luck ! Worked For me !
Thanks for your help and the link to the thread!! I will use your approach next time. Indeed, in the day afterwards I was able to finally flash the phone from the same PC. I did the manipulation, which failed miserably, with a 64 bit Windows 7 RC. Then, I realised I had another version of W7 on the same PC, a 32 bit version this time. Thus, when I tried it with my dying telephone, the "serial" message on its screen switched "magically" to "usb" and I finally could flash the damned mobile! Frankly, I don't know what's wrong with my 64bit W7 if anything.
Cheers
Max
my htc pro2 failed upgrade: any help
WarlockW said:
Yea .. same thing happened to me ..
Check Here For Full Info: Click Here
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it)
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Good Luck ! Worked For me
i tried this option but didn't work, is there any help, the phone can't come up again
it show this Error msg at 0% "BOOTLOADER - FAIL" update terminated
Click to expand...
Click to collapse
larryike said:
i tried this option but didn't work, is there any help, the phone can't come up again
it show this Error msg at 0% "BOOTLOADER - FAIL" update terminated
Click to expand...
Click to collapse
\
Did you try the stock rom from HTC loaded over the usb first?
Information about what unlocker you tried to use, what kind of phone you have, what kind of rom you tried to load would be helpful.
Hi fellows,
A friend of mine just came back from US with a Galaxy Tab 3 Kids wondering if portuguese language will appear on the device when he lands on Rio. This surely didn´t happened.
He is pissed off with Best Buy guys that told him this bull****.
I´m trying to help him since his little boy doesn´t speak english.
Is it OK to pick the brazilian stock firmware (ZTO) that I´ve found here (http://samsung-updates.com/details/16066/Galaxy_Tab_3_Kids/SM-T2105/ZTO/T2105UBAMK1.html) and using ODIN to flash on a US device?
If someone could tell me the necessary steps, I´ll be very thankfull.
All best,
Sergio
Rio de Janeiro/Brazil
smafra said:
Hi fellows,
A friend of mine just came back from US with a Galaxy Tab 3 Kids wondering if portuguese language will appear on the device when he lands on Rio. This surely didn´t happened.
He is pissed off with Best Buy guys that told him this bull****.
I´m trying to help him since his little boy doesn´t speak english.
Is it OK to pick the brazilian stock firmware (ZTO) that I´ve found here (http://samsung-updates.com/details/16066/Galaxy_Tab_3_Kids/SM-T2105/ZTO/T2105UBAMK1.html) and using ODIN to flash on a US device?
If someone could tell me the necessary steps, I´ll be very thankfull.
All best,
Sergio
Rio de Janeiro/Brazil
Click to expand...
Click to collapse
The way is simple, you must flash the Firmware with Odin
( i have modified the instruction from gr8nole thread Recovery and root ) hit thanks by gr8nole http://forum.xda-developers.com/showthread.php?t=2433853
the way are the same
1. Download ODIN and USB drivers on your computer (just do a google search to find it...version 3.07 will work fine). http://forum.xda-developers.com/showthread.php?t=2189539
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the Firmware file you want to flash, but the file must be an *.tar or *.tar.md5.
8. Hit "START"
9. Wait for device to restart.
I hope these are helpful
bierma32 said:
The way is simple, you must flash the Firmware with Odin
( i have modified the instruction from gr8nole thread Recovery and root ) hit thanks by gr8nole http://forum.xda-developers.com/showthread.php?t=2433853
the way are the same
1. Download ODIN and USB drivers on your computer (just do a google search to find it...version 3.07 will work fine). http://forum.xda-developers.com/showthread.php?t=2189539
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the Firmware file you want to flash, but the file must be an *.tar or *.tar.md5.
8. Hit "START"
9. Wait for device to restart.
I hope these are helpful
Click to expand...
Click to collapse
Thanks so much. It worked perfect!!!
FIXED!
Hi!
I would appreciate some help with my problem, after installing TWRP i did a factory reset from the stock ROM and now i am booting constantly into TWRP.
When i install CM11 from my external_sd it still won't boot up into CM11 even though it says installation succesfull.
I tried to sideload adb within TWRP but it will not work. When i go to recovery (that is where the LG logo appaears and stays by holding down vol+ and vol-) and try using fastboot "no device is attached" message will come up although windows device manager shows that a device LG-V500 is connected.
USB drivers i downloaded from LG.
So could anyone help me with tips about loading stock or CM11.
Thanks in advance.
Found a new method:
How to flash ROM:
1) Download the Rom You Want! Choose your model At the Link Below - The Files are Hosted on my server for fast speeds!
Click Here
2) Download LG mobile support tool and Install it. (It will open up when its done just CLOSE IT OFF)
LG Mobile Support Tool Download
3) Download / Install FlashTool (R&D Test Tool) & Drivers
Download Here
4) Power off your G2, press Volume Up & Down key and then plug in the usb cable (enter to a download mode)
5) Extract FlashTool and run UpTestEX.exe
6) In R&D Test Tool window,
Select Type = 3GQCT (top left hand side)
PhoneMode = DIAG (top right hand side)
Select kdz file = click to select your LG stock rom *.kdz
Click "Normal web upgrade test" (bottom right hand side)
Then another window will pop up, click "Upgrade Start" button
wait a few seconds, another window "Select Country & Language" pop up,
=> Country=Republic of Korea
=> Language=English
you can click ok to proceed
7) All Done and wait for finish!
8) Be Sure that after flashing to perform a reset as for some reason flashing this does not remove what was there before until you reset. By turning off, Holding down power and Vol Down until it comes up on the screen.
If I helped you in anyway feel free to Buy me a Drink or click that THANKS button
But it cannot connect to my pad, usb doesnot recognize ?????
Anyone ?
same here, how did you fixed it?
Inviato dal mio Nexus 4 utilizzando Tapatalk
Hi everyone. Just like in the title of my post. I've just bought a TP-LINK NEFFOS Y5L smartphone, and I started to looking information, how I can get root for this device. And I found it:
https://morfitronik.pl/android-root-smartfona-neffos-y5l-tp-link/
Sad that this site is`t online anymore, but u can find it on github or gitlab.
I've flash this recovery, and it's working fine. The next step to root was to download the zip package from the chainfire site (currently abandoned, but u may use magisk from xda) :
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Latest MAGISK:
https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
Well, I've done it. It's working, and I have root on Android 6.1.
Here it is :
View attachment recovery-neffos-y5l-tp-link-twrp.apk
u will have to change extention of file from *.apk to *.img due to xda registration of size file uploaded.
Tutorial how to do this:
https://youtu.be/SfkbkcXSa2M
And if u want to buy me a beer, that is my account number:
PL 37 1020 4317 0000 5402 0389 9689
IBAN BPKOPLPW
Thanks a lot for your support.
How did you flash that twrp recovery...:laugh:
I just flash this recovery via fastboot mode.
TuanPengarah said:
How did you flash that twrp recovery...:laugh:
Click to expand...
Click to collapse
U may also try to boot your phone in this recovery throu fastboot boot image.img
Hello,
I am a bit new... It seems I can't use flashboot mode.
I have DL ADB, then when I key : /adb devices, I see my Y5L.
Then I try to relaunch my device by pressing the VOL + / Restart button => I reach a picture of android and 3 japanese (or chinese characters).
When I plug the device to my PC, it seems that nothing happen (like it was not recognised by the PC).
Du you have any idea?
Best regards
Hello. It is a very annoying thing, but also very simple to solve. If u see the broken robot when u trying to enter to recovery, u must push and hold power button and short press vol+. But if you want to go to recovery or fastboot mode, u don't have to power down your phone. Just go to cmd (or whatever) console and write:
" adb reboot recovery" to boot up you device in recovery mode or
"and reboot bootloader" to boot into fastboot mode
Seeia.
Greetings!
The custom TWRP link does not seem to work as it should be. Either that or I am missing something
Could you please re-upload the recovery file?
Thanks!
"edit: I found it"
Can someone write a tutorial please, it's the first time i try to root with TWRP and i don't understand if the bootloader method for emample is from the device or from the pc because i can enter to the official android device (Y5L ANDROID 6.0.1 ) recovery menu but when i choose to boot at bootloader the phone freeze at the logo. Thanks a lot for any help.
Calaad said:
Hello,
I am a bit new... It seems I can't use flashboot mode.
I have DL ADB, then when I key : /adb devices, I see my Y5L.
Then I try to relaunch my device by pressing the VOL + / Restart button => I reach a picture of android and 3 japanese (or chinese characters).
When I plug the device to my PC, it seems that nothing happen (like it was not recognised by the PC).
Du you have any idea?
Best regards
Click to expand...
Click to collapse
1. pressing the VOL up + Power button => reached a picture of android and 3 Chinese characters (means no command !)
2. pressing again the VOL up + Power button => then you will reached recovery mode.
I had seem this polish method but I get afraid because there is no method to recovery to original rom.
I hope to see a custom rom in next days.
thanks
Hi, I'm trying to install the custom bootloader but after running:
abd reboot bootloader
the phone gets stuck on the tp-link logo.
Trying with volume-up + power shows the broken android logo, from there, holding power + vol-up gets me to recovery but neither fastboot nor adb detect the device. Selecting the "reboot to bootloader" option there ends in the same lock on the tp-link logo.
(I did activate the "unlock bootloader" in developer options.)
Any ideas on how to proceed? thx in advance.
TieSKey said:
Hi, I'm trying to install the custom bootloader but after running:
abd reboot bootloader
the phone gets stuck on the tp-link logo.
Trying with volume-up + power shows the broken android logo, from there, holding power + vol-up gets me to recovery but neither fastboot nor adb detect the device. Selecting the "reboot to bootloader" option there ends in the same lock on the tp-link logo.
(I did activate the "unlock bootloader" in developer options.)
Any ideas on how to proceed? thx in advance.
Click to expand...
Click to collapse
Yeah i also had this problem, open at the android menu your phone and make sure you have enable developer settings and USB Debugging, install Wondershare MobileGo at your pc ( you don't need to install the app at your phone) and connect your phone with the pc, wait to find the drivers at the charge usb selection and after that swap from your phone to all 4 settings of usb connections, mobilego will download 4 drivers total and after that it will read it.
I cant post a link but if you have Chrome to translate from polish to english there is a new simple tutorial, go at the first link at the op post and at the site click at the red text at the beginning next to "twrp" text and translate to english for guide.
sixdiceray said:
Yeah i also had this problem, open at the android menu your phone and make sure you have enable developer settings and USB Debugging, install Wondershare MobileGo at your pc ( you don't need to install the app at your phone) and connect your phone with the pc, wait to find the drivers at the charge usb selection and after that swap from your phone to all 4 settings of usb connections, mobilego will download 4 drivers total and after that it will read it.
I cant post a link but if you have Chrome to translate from polish to english there is a new simple tutorial, go at the first link at the op post and at the site click at the red text at the beginning next to "twrp" text and translate to english for guide.
Click to expand...
Click to collapse
That worked fine. Weird there's no official drivers for download.
Thx.
TieSKey said:
That worked fine. Weird there's no official drivers for download.
Thx.
Click to expand...
Click to collapse
NP and maybe there is but i didn't find any official mobile app management tool from tplink to download.
Thx!
A little offtopic but, any idea on how to enable diagnostic usb port on this device? Nothing in this guide worked so far: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
hi
Why does not this mobile display the number of unread messages (sms)?
Why can not I choose one or two SIM cards in my message program?
Why does not the percentage of battery remaining up the screen?
Why does gps work too slowly?
I Have Successfully installed TWRP But when restart TWRP I got blank image
I have successfully install but when reboot recovery I got blank image that have don't show TWRP Logo
How to root!?
Whit out pc?