Related
OK I have a Galaxy Tab3 GT-P5210, I have developer usb debugging enabled, I have the Samsung KIES package installed on my PC and I've downloaded Odin307, the TWRP package and the ROOT package that is well documented in this guide: http://forum.xda-developers.com/showthread.php?t=2525630
The problem I'm having is with the step that says:
Power down your device and put it into download mode. To do this, press and hold the Home + Volume Down + Power buttons simultaneously for 3 to 5 seconds until you see the warning screen.
When I do this it goes into something called 'Android System Recovery <3e>" with a prompt that says "# MANUAL MODE #" with the following options:
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
and it does not show up in Odin so I cannot get further...how can I resolve this?
as a rant here, I really wish Google would mandate that all providers supply an option to root the device and install stock Android...this nonstop jumping thru hoops just to have basic control over a device you spent good money on is ****ing stupid
Found your problem!
snafu7x7 said:
OK I have a Galaxy Tab3 GT-P5210, I have developer usb debugging enabled, I have the Samsung KIES package installed on my PC and I've downloaded Odin307, the TWRP package and the ROOT package that is well documented in this guide: http://forum.xda-developers.com/showthread.php?t=2525630
The problem I'm having is with the step that says:
Power down your device and put it into download mode. To do this, press and hold the Home + Volume Down + Power buttons simultaneously for 3 to 5 seconds until you see the warning screen.
When I do this it goes into something called 'Android System Recovery <3e>" with a prompt that says "# MANUAL MODE #" with the following options:
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
and it does not show up in Odin so I cannot get further...how can I resolve this?
as a rant here, I really wish Google would mandate that all providers supply an option to root the device and install stock Android...this nonstop jumping thru hoops just to have basic control over a device you spent good money on is ****ing stupid
Click to expand...
Click to collapse
Hey man download mode is where you flash custom recoveries and custom or stock Roms on your device. The answer to you for download mode is your not holding it down enough. first power off the device. Second hold these buttons all together: power + Volume Down + home button. Keep holding these buttons for a minimum of 10-15 seconds or more and it will go into download mode. From there you open up Odin on your pc and then you should see in a box your com port this means your connected. From there you it PDA and you select your recovery file. It should end with
.md5! Make sure re-partition is not checked or you will brick your device! Now it start and once it's done it will say Res OK. Good luck!
got it
JT1510365 said:
Hey man download mode is where you flash custom recoveries and custom or stock Roms on your device. The answer to you for download mode is your not holding it down enough. first power off the device. Second hold these buttons all together: power + Volume Down + home button. Keep holding these buttons for a minimum of 10-15 seconds or more and it will go into download mode. From there you open up Odin on your pc and then you should see in a box your com port this means your connected. From there you it PDA and you select your recovery file. It should end with
.md5! Make sure re-partition is not checked or you will brick your device! Now it start and once it's done it will say Res OK. Good luck!
Click to expand...
Click to collapse
You know what it was? Its a brand new tablet for me and so when it is held lengthwise (like you'd hold a phone normally) the Vol+ button is at the BOTTOM, not the top like every phone I've ever owned. So I was holding Vol- instead and that's why it wasn't working for me...boneheaded mistake but thanks for the reply...I can now boot it into Download mode ...though I still can't get Odin to recognize it
thanks for the reply
snafu7x7 said:
You know what it was? Its a brand new tablet for me and so when it is held lengthwise (like you'd hold a phone normally) the Vol+ button is at the BOTTOM, not the top like every phone I've ever owned. So I was holding Vol- instead and that's why it wasn't working for me...boneheaded mistake but thanks for the reply...I can now boot it into Download mode ...though I still can't get Odin to recognize it
thanks for the reply
Click to expand...
Click to collapse
connecting to odin is the same for every samsung device. I am going to try my best to help you out so here we go. Check to make sure you have the samsung usb drivers. to do that go to my computer then local disk then go to programs and files. if you see the SAMSUNG folder and when you open it and you see the drivers folder containg the usb drivers then if you don't see it then we need to install the drivers. first uninstall kies. you don't need this.the download and open this exe file: https://docs.google.com/file/d/0B_nizg6yUZ0NS1RodDBxd0E1MFU/preview . install it normally.
Need more help just ask
thanks
JT1510365 said:
connecting to odin is the same for every samsung device. I am going to try my best to help you out so here we go. Check to make sure you have the samsung usb drivers. to do that go to my computer then local disk then go to programs and files. if you see the SAMSUNG folder and when you open it and you see the drivers folder containg the usb drivers then if you don't see it then we need to install the drivers. first uninstall kies. you don't need this.the download and open this exe file: . install it normally.
Need more help just ask
Click to expand...
Click to collapse
After trying some different things I got Odin working, was able to install TWRP and root the device so that's all good
Now I've downloaded the framework-res.apk and decompiled it, modded it as i wanted to and recompiled using the Android Multitool app and the final issue I'm having is pushing the new framework-res.apk back to the device. The Android Multitool app claims it pushes the file but it does not. So I downloaded the latest sdk and I'm going to try using the raw ADB tool to push the file and see if that works...wish me luck
You can use twrp file manger to do that.
Just copy your file to sdcard while connected to pc and then reboot to recovery use file manager in advanced settings. Find your file and copy it to where ever you need it.
After downloading the new AT&T update yesterday my phone (No root) went thru the update process and completed and then restarted itself and ever since then has been stuck in a boot loop on the LG logo screen. Was going to do the flashing procedure but when I try to boot the phone in download mode the little box appears saying "download mode" but instead of the "firmware update" screen appearing shortly after that my screen just goes black again. Have tried every port using the stock chord on my computer (Windows 8.1, USB 3.0) and have tried every port on another computer (Windows 7, USB 2.0) and still the same thing every time. Have installed the proper LG drivers on both computers but still fails to recognize the phone correctly under device manager as well.
ANY HELP IS MUCH APPRECIATED!
Update to lollipop? Wow sorry to hear that OP. Did you pull out the battery? Sometimes that helps strangely.
squall458 said:
Update to lollipop? Wow sorry to hear that OP. Did you pull out the battery? Sometimes that helps strangely.
Click to expand...
Click to collapse
Update to lolipop went fine it was this update that enables VoLTE that screwed it up. I cant post link because I am a new member but google it and you will find it.
But yes pulled the battery out first to end the boot loop and thats where the original post picks up from.
Sometimes to get into Download Mode:
Remove Battery.
Press Volume Up.
While still pressing Volume Up, replace Battery.
Still pressing Volume Up, connect to p.c. by USB Cable. Phone should now enter Download Mode......
jac10000 said:
Sometimes to get into Download Mode:
Remove Battery.
Press Volume Up.
While still pressing Volume Up, replace Battery.
Still pressing Volume Up, connect to p.c. by USB Cable. Phone should now enter Download Mode......
Click to expand...
Click to collapse
Thanks for the tip but still the same outcome.
craincrizzy said:
Thanks for the tip but still the same outcome.
Click to expand...
Click to collapse
How is it recognized in dvice manger on your computer. USB port ? COM port ?
jac10000 said:
How is it recognized in dvice manger on your computer. USB port ? COM port ?
Click to expand...
Click to collapse
Shows up under other devices as "QHSUSB_BULK"
craincrizzy said:
Shows up under other devices as "QHSUSB_BULK"
Click to expand...
Click to collapse
Ok your G3 is brick, you can try that : http://forum.xda-developers.com/lg-g2/general/tool-unbrick-lg-g2-qualcomm-9008-board-t3072073
Thank you so much for pointing me to that program! Worked like a charm.
Sent from my LG-D850 using XDA Free mobile app
craincrizzy, I am having the same issue with my LG G3 D850. Device manager shows QHUSB_bulk. What steps did you take to get your issue resolve?
I'm at work right now but once I'm home I will give you a step by step.
Sent from my LG-D850 using XDA Free mobile app
craincrizzy said:
I'm at work right now but once I'm home I will give you a step by step.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man, I will wait for you.
What driver do you use?
I have conecct a pin of the micro to the ground (how I read) and no more HQSUBS, now Windows detect a unknow device USB.
phillye said:
craincrizzy, I am having the same issue with my LG G3 D850. Device manager shows QHUSB_bulk. What steps did you take to get your issue resolve?
Click to expand...
Click to collapse
Before I even start just gonna let you know you have to flash the phone back to the stock firmware meaning you will lose anything saved on your phone but this is the only way to get it back functional.
Pre-requirements
1. Stock LG cord that came with phone
2. Desktop computer with USB 2.0 ports (3.0 wouldnt work for me)
3. Disable driver signature enforcement (Depends on OS as to how to do this so just google it. Takes just a few minutes)
*UNPLUG PHONE BEFORE STARTING*
1. Download and install the QDLoader HS-USB Driver here: http://www.androidbrick.com/download/qdloader-hs-usb-driver/
2. Plug your phone in while holding volume up to initiate "Download Mode" and it should now show up under "Ports" as "Qualcomm HS-USB QDLoader 9008"
3. Download and extract this: https://www.drive.google.com/file/d/0B_Hol5T47S-bYjNETmVPZkdWUms/view
4. Now download the stock fimware files (the .zip and .dll files) here: http://downloadandroidfiles.org/directory-php/?Directory=/LG%20G3/Stock%20Files/ATT%20D850
5. Extract the .tot file out of the .zip file and place it and your .dll file on your desktop.
6. Now open (be sure to right click and run as administrator!) BoardDiag which is located in the BoardDiag_V2_9 folder you downloaded in step 3.
7. If you need pictures to follow along with the next few steps go here: http://forum.xda-developers.com/lg-g2/general/tool-unbrick-lg-g2-qualcomm-9008-board-t3072073 and see the Attached Thumbnails at the bottom of the first post.
7. At the bottom under "Image Extraction" place the .tot file in the BIN field and make the DIR wherever you wish the files to be extracted to and then hit "Extract" and wait for process to finish.
8. Now under "Board Diag Test" check the boxes beside "AP check" and "EMMC TEST"
9. In the right column make sure "B2 (MSM8974AC)" is selected in dropdown "AP Chipset"
10. On the "Com Port" dropdown select the COM number your device shows up with in Device Manager.
11. In the "Target Dir" type the destination where you extracted the .tot file to in Step 7.
12. Click "START" and wait for process to finish. If the test passes the AP check and the EMMC TEST then you're good to go. If not then im afraid you have a hard brick and I cant help you there.
13. Uncheck "EMMC TEST" and check "RESTORE BOOT IMG" under "Restore Device"
14. In the dropdown beside "RESTORE BOOT IMG" choose the following in the order typed and hit "START" after choosing each file letting it flash the stock file to your phone: aboot--Backupgpt--boot--dbi--laf--Primarygpt--recovery--rpm--tz--sbl1
15. Your phone should now have the LG logo and underneath that say "Security Error".
16. Unplug your phone and pop your battery out and back in. Now plug your phone in while holding volume up for "Download Mode" and this time it should display the "Firmware Update" screen after a few seconds.
17. Now that you have the Firmware screen this guide will help you get your phone software back up and going (THIS IS WHERE YOU NEED A USB 2.0 PORT): http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html
Good Luck!!
Imporatant: If the OTA update boot looped your phone like mine DO NOT apply any OTA updates your phone tells you to apply because the same thing will happen again (Trust me I tried it)
craincrizzy, much thanks. Well written. I finally got the phone up. Good to be back in business. Thank you a million times again!
Good to hear. Glad I could help.
Sent from my LG-D850 using XDA Free mobile app
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Same. I tried using the official instructions to flash the stock rom but the SP flash tool stops responding after download button is pressed
a.cid said:
Same. I tried using the official instructions to flash the stock rom but the SP flash tool stops responding after download button is pressed
Click to expand...
Click to collapse
The Hardware of P8000 is pretty cool, but the Software is "§$§"%§""!$%
When you go to recovery mode and get the the android robot symbol. Press again Vol up + Power until you enter to recovery. Make a 3 wipe (data factory , cache and dalvink). Reboot and uninstall the El loader. Use another Loader instead of El Loader
i had the same problem. (in English NO COMMAND) I only flash Eragon ROM again. Sometimes you have to repeate.
AL 6677 - ELEPHONE MUST BE TURN-OFF !!!!!!! and CONNECT USB CABLE REPEATEDLY !!!
After that everything goes according to instructions
https://translate.google.at/transla...-p8000-rooten-und-flashen/&edit-text=&act=url
same problem since OTA my phone is bricked and cant unbrick
neonero said:
When you go to recovery mode and get the the android robot symbol. Press again Vol up + Power until you enter to recovery. Make a 3 wipe (data factory , cache and dalvink). Reboot and uninstall the El loader. Use another Loader instead of El Loader
Click to expand...
Click to collapse
THX a lot, I found only the 2 Options to wipe data factory and cache....... dalvink was not displayed in the menue (screenshot attached)
How to uninstall the EL Loader ?
showshow747 said:
i had the same problem. (in English NO COMMAND) I only flash Eragon ROM again. Sometimes you have to repeate.
AL 6677 - ELEPHONE MUST BE TURN-OFF !!!!!!! and CONNECT USB CABLE REPEATEDLY !!!
After that everything goes according to instructions
THX, I will try to flash Eragon, CM 12.1 is still not available, isn't it?
Click to expand...
Click to collapse
No CM 12.1 is not available yet.
In order to uninstall EI Loader, install first root (superSU), then install ccleaner and you can uninstall EI Loader (In system app)
Hi there, sorry for the revival !
But i got the same problem: OTA update, fail, P8000 blocked on boot screen.
I tried wipe data/factory reset + wipe cache -> nothing changed, still boot screen blocked...
Then, i tried to use flash tool, but, the phone isn't booting, so my pc isn't recognizing the phone..
I'm not even sure that I correctly installed the drivers..
Can i use flash tool even if the phone is blocked to boot screen?
I downloaded this ROM: stock-rom-elephone-p8000-20150907-android-5-1 (this is my first post i can't post URL..)
Because i got some issues with my phone and support told me to try it.
But when i follow the tutorial, launching "donwload" and connecting the phone, nothing happening..
The phone turn on, and display recharging logo, and flash tool still wainting.
Recovery mode -> "No command", Volume up + power is working, i used it to wipe datas
But at the moment, i'm still blocked, since 2 days, i dont know what to do
Can someone help me?
Thank you by advance, i hope my english isn't so bad
Zywoon said:
Hi there, sorry for the revival !
But i got the same problem: OTA update, fail, P8000 blocked on boot screen.
I tried wipe data/factory reset + wipe cache -> nothing changed, still boot screen blocked...
Then, i tried to use flash tool, but, the phone isn't booting, so my pc isn't recognizing the phone..
I'm not even sure that I correctly installed the drivers..
Can i use flash tool even if the phone is blocked to boot screen?
I downloaded this ROM: stock-rom-elephone-p8000-20150907-android-5-1 (this is my first post i can't post URL..)
Because i got some issues with my phone and support told me to try it.
But when i follow the tutorial, launching "donwload" and connecting the phone, nothing happening..
The phone turn on, and display recharging logo, and flash tool still wainting.
Recovery mode -> "No command", Volume up + power is working, i used it to wipe datas
But at the moment, i'm still blocked, since 2 days, i dont know what to do
Can someone help me?
Thank you by advance, i hope my english isn't so bad
Click to expand...
Click to collapse
Yes you can use SPFlash tool evenif the phone stucks in the boot screen. Simply switch the phone off, start SPFlash tool and then connect the phone to usb.
If you follow the instructions from elephone, then your phone should working again: http://bbs.elephone.hk/thread-1037-1-1.html#.VofQ13wvdpo
Cheers
Hi, and thx for the help.
The driver is correctly installed now, i had to allow unsigned drivers in windows parameters.
So, i followed the tutorial, again.
I configured SP flash tool, clicked download, and then connected powered off P8000 with USB.
But, again, the phone displays recharging logo, and flash tool still waiting...
The phone is recharging so the USB is working, so i don't know how to make my PC detect the phone......
Is there a way or a thing that i missed?
thank you..
EDIT: i finally got a timeout error from flashtool..
I missed something, but what !? i can't remove P8000 battery, is there somthing to do to get it detected by windows?
Like a boot mode, or a magic formula... i'm open
For MTK Driver installation:
Did you follow skeletons Guide? http://forum.xda-developers.com/elephone-p8000/help/guide-windows-10-mtk-vcom-usb-drivers-t3264884
I'm sorry to say, that I do not have any experience with windows installation, this problem, because SPFlash tool performes on my 64bit Linux very well, without any driver trouble.
Cheers
Hi,
I'm on windows 8.
I used SP_driver_v2.0, that is an .exe
it's the only driver tips gived in most of tutorial
I allowed unsigned drivers installation, and i correctly installed it.
I tried too use flashtool before and after restarting the PC-> no changes
Flashtool doesnt detect the phone
I start getting crazy..
I have repaired mine, so i'll share
Al6677 said:
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Click to expand...
Click to collapse
So the simple way to solve it is flashing the latest stock elephone p8000 ROM, which you can find on google easly
1. as described on other forums, you have to install the adnroid drivers, then get the sp flash tool, and have an un-zipped stock elephone p8000 ROM.
2. if you are stuck at bootloop, do the following to power off the phone so you can flash the ROM
1. Long press power button until power off
2.Do it fast--Press volume Up and then hold power button
3. choose recovery (volume up choose menu, volume down enter)
4. android logo with red triangle is displayed( "no command")
5. hold power button and press volume up
You're in recovery mode
3. select power off
4. open the SP flash tool >go to download tab>opne "scatter loading"( you will find it in the Folder where you unzipped the stock elephone p8000 ROM, if you have more folders there, chose "firmware" folder)
5. on the left side, under scatter loading, you will find a "pull-down" tab - it will be written "download" chose "firmware upgrade" or "upgrade"
6. start the process, then connect your elephone p8000 (it must be powere off) via usb cable to the PC, the process will start,and in less then 5 Minutes you have a factory new Elephone p8000 with the latest good update
7. WATCH OUT- it will erase all your data, absolutely all your data on the phone, except SIM and SD card.
Hope it helped, if not, feel free to ask me =)
Hello,
I have similar problem. Bought P8000 5 days ago. Did update today. Bricked. Stuck at logo ... I tried to flash but SP flush tool but the process isn't starting. When I downloaded ROM I received long list as on the screenshot: kaczorowscy.name/Screenshot.png
I have ubuntu - I see lsusb and dmesg see the phone (it is shut down from recovery menu) but maybe I am missing something ....
Ok here is what id did:
1. Get SP flashtool
2. get newest stock ROM
3. Shut down phone through android recovery menu (start phone with holding volume up, select recovery mode, wait for dead android, hold volume up and unblock button for 3 sec.)
4. Open SP flashtool - use "format all + download" of ROM (unzip and select scatter file from rom) - click start
5. Connect shut downed phone
6. Dot OK! from flashtool
PS. Flashing removed IMEIs - they are both written on the battery - you need to use android service menu to check them with special codes and reboot the phone.
Thanks ALL! :good:
Fix - Recovery Mode
Al6677 said:
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Click to expand...
Click to collapse
When I was trying to root my p8000 I couldn't flash a custom recovery, fortunately I discovered that to access recovery on stock android you need to go to the screen with the android and "no command"/"no order" text and hold down Vol+Up and Power for 3~ seconds and then release power, this will boot you into recovery mode, If wiping cache/factory reset isn't enough "fastboot flash recovery <image>.img" SHOULD work now
hope this helped
Hi everyone. Just like in the title of my post. I've just bought a TP-LINK NEFFOS Y5L smartphone, and I started to looking information, how I can get root for this device. And I found it:
https://morfitronik.pl/android-root-smartfona-neffos-y5l-tp-link/
Sad that this site is`t online anymore, but u can find it on github or gitlab.
I've flash this recovery, and it's working fine. The next step to root was to download the zip package from the chainfire site (currently abandoned, but u may use magisk from xda) :
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Latest MAGISK:
https://github.com/topjohnwu/Magisk/releases/download/v16.0/Magisk-v16.0.zip
Well, I've done it. It's working, and I have root on Android 6.1.
Here it is :
View attachment recovery-neffos-y5l-tp-link-twrp.apk
u will have to change extention of file from *.apk to *.img due to xda registration of size file uploaded.
Tutorial how to do this:
https://youtu.be/SfkbkcXSa2M
And if u want to buy me a beer, that is my account number:
PL 37 1020 4317 0000 5402 0389 9689
IBAN BPKOPLPW
Thanks a lot for your support.
How did you flash that twrp recovery...:laugh:
I just flash this recovery via fastboot mode.
TuanPengarah said:
How did you flash that twrp recovery...:laugh:
Click to expand...
Click to collapse
U may also try to boot your phone in this recovery throu fastboot boot image.img
Hello,
I am a bit new... It seems I can't use flashboot mode.
I have DL ADB, then when I key : /adb devices, I see my Y5L.
Then I try to relaunch my device by pressing the VOL + / Restart button => I reach a picture of android and 3 japanese (or chinese characters).
When I plug the device to my PC, it seems that nothing happen (like it was not recognised by the PC).
Du you have any idea?
Best regards
Hello. It is a very annoying thing, but also very simple to solve. If u see the broken robot when u trying to enter to recovery, u must push and hold power button and short press vol+. But if you want to go to recovery or fastboot mode, u don't have to power down your phone. Just go to cmd (or whatever) console and write:
" adb reboot recovery" to boot up you device in recovery mode or
"and reboot bootloader" to boot into fastboot mode
Seeia.
Greetings!
The custom TWRP link does not seem to work as it should be. Either that or I am missing something
Could you please re-upload the recovery file?
Thanks!
"edit: I found it"
Can someone write a tutorial please, it's the first time i try to root with TWRP and i don't understand if the bootloader method for emample is from the device or from the pc because i can enter to the official android device (Y5L ANDROID 6.0.1 ) recovery menu but when i choose to boot at bootloader the phone freeze at the logo. Thanks a lot for any help.
Calaad said:
Hello,
I am a bit new... It seems I can't use flashboot mode.
I have DL ADB, then when I key : /adb devices, I see my Y5L.
Then I try to relaunch my device by pressing the VOL + / Restart button => I reach a picture of android and 3 japanese (or chinese characters).
When I plug the device to my PC, it seems that nothing happen (like it was not recognised by the PC).
Du you have any idea?
Best regards
Click to expand...
Click to collapse
1. pressing the VOL up + Power button => reached a picture of android and 3 Chinese characters (means no command !)
2. pressing again the VOL up + Power button => then you will reached recovery mode.
I had seem this polish method but I get afraid because there is no method to recovery to original rom.
I hope to see a custom rom in next days.
thanks
Hi, I'm trying to install the custom bootloader but after running:
abd reboot bootloader
the phone gets stuck on the tp-link logo.
Trying with volume-up + power shows the broken android logo, from there, holding power + vol-up gets me to recovery but neither fastboot nor adb detect the device. Selecting the "reboot to bootloader" option there ends in the same lock on the tp-link logo.
(I did activate the "unlock bootloader" in developer options.)
Any ideas on how to proceed? thx in advance.
TieSKey said:
Hi, I'm trying to install the custom bootloader but after running:
abd reboot bootloader
the phone gets stuck on the tp-link logo.
Trying with volume-up + power shows the broken android logo, from there, holding power + vol-up gets me to recovery but neither fastboot nor adb detect the device. Selecting the "reboot to bootloader" option there ends in the same lock on the tp-link logo.
(I did activate the "unlock bootloader" in developer options.)
Any ideas on how to proceed? thx in advance.
Click to expand...
Click to collapse
Yeah i also had this problem, open at the android menu your phone and make sure you have enable developer settings and USB Debugging, install Wondershare MobileGo at your pc ( you don't need to install the app at your phone) and connect your phone with the pc, wait to find the drivers at the charge usb selection and after that swap from your phone to all 4 settings of usb connections, mobilego will download 4 drivers total and after that it will read it.
I cant post a link but if you have Chrome to translate from polish to english there is a new simple tutorial, go at the first link at the op post and at the site click at the red text at the beginning next to "twrp" text and translate to english for guide.
sixdiceray said:
Yeah i also had this problem, open at the android menu your phone and make sure you have enable developer settings and USB Debugging, install Wondershare MobileGo at your pc ( you don't need to install the app at your phone) and connect your phone with the pc, wait to find the drivers at the charge usb selection and after that swap from your phone to all 4 settings of usb connections, mobilego will download 4 drivers total and after that it will read it.
I cant post a link but if you have Chrome to translate from polish to english there is a new simple tutorial, go at the first link at the op post and at the site click at the red text at the beginning next to "twrp" text and translate to english for guide.
Click to expand...
Click to collapse
That worked fine. Weird there's no official drivers for download.
Thx.
TieSKey said:
That worked fine. Weird there's no official drivers for download.
Thx.
Click to expand...
Click to collapse
NP and maybe there is but i didn't find any official mobile app management tool from tplink to download.
Thx!
A little offtopic but, any idea on how to enable diagnostic usb port on this device? Nothing in this guide worked so far: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
hi
Why does not this mobile display the number of unread messages (sms)?
Why can not I choose one or two SIM cards in my message program?
Why does not the percentage of battery remaining up the screen?
Why does gps work too slowly?
I Have Successfully installed TWRP But when restart TWRP I got blank image
I have successfully install but when reboot recovery I got blank image that have don't show TWRP Logo
How to root!?
Whit out pc?
Hi
I've been asked to reset the tablet so I went into settings - backup and restore and choose to factory reset, tablet rebooted and since then it keeps showing the "downloading do not turn off target". I tried already all buttons combinations and I can restart it but it goes back to the download screen and there is no way to turn it off. Unfortunately I didn't thought to enable USB debug or whatever in development options. Is there anything else I can do to get it back? Either custom or stock rom, I don't care. Thanks
Inviato dal mio ASUS_Z00A utilizzando Tapatalk
gohanSS said:
Hi
I've been asked to reset the tablet so I went into settings - backup and restore and choose to factory reset, tablet rebooted and since then it keeps showing the "downloading do not turn off target". I tried already all buttons combinations and I can restart it but it goes back to the download screen and there is no way to turn it off. Unfortunately I didn't thought to enable USB debug or whatever in development options. Is there anything else I can do to get it back? Either custom or stock rom, I don't care. Thanks
Inviato dal mio ASUS_Z00A utilizzando Tapatalk
Click to expand...
Click to collapse
1. Connect the tablet to your computer using a USB cable.
2. Grab the latest firmware from either Updato or SamMobile (you have to register in the latter website).
3. Download Odin from odindownload.com (make sure to press the white and blue lettered download box).
4. Once downloaded, extract and open Odin using administrator privileges (right-click the program file and click "Run as Administrator").
5. In the top left corner it should say "COMnumber)" if you successfully connected your tablet.
6. Extract your firmware file that you downloaded.
7. Click the AP button, and select the .img.tar file (I think).
8. Go to the "Options" tab in the mid-left hand corner, and tick "Auto Reboot" (skip if automatically enabled).
9. Click the "Start" button in Odin.
10. Wait for it to complete. Do not do anything at this point, including disconnecting your tablet, turning off your PC, closing Odin and etc.
11. Once your tablet is done downloading, it should reboot.
12. Once rebooted and on the setup screen, turn it off
13. Press the following buttons altogether at the same time: Volume Up+Home+Power
14. It should boot into the recovery. If not, turn off the device and press Volume Down+Home+Power.
15. Once in the recover, using the volume keys to navigate and the power button to select, press "factory reset" or "wipe" and then select "yes" and it will begin.
16. Once done with the wipe, reboot your device.
17. Voila! If I am wrong in something here, hopefully someone can correct it.
jeokim said:
1. Connect the tablet to your computer using a USB cable.
2. Grab the latest firmware from either Updato or SamMobile (you have to register in the latter website).
3. Download Odin from odindownload.com (make sure to press the white and blue lettered download box).
4. Once downloaded, extract and open Odin using administrator privileges (right-click the program file and click "Run as Administrator").
5. In the top left corner it should say "COMnumber)" if you successfully connected your tablet.
6. Extract your firmware file that you downloaded.
7. Click the AP button, and select the .img.tar file (I think).
8. Go to the "Options" tab in the mid-left hand corner, and tick "Auto Reboot" (skip if automatically enabled).
9. Click the "Start" button in Odin.
10. Wait for it to complete. Do not do anything at this point, including disconnecting your tablet, turning off your PC, closing Odin and etc.
11. Once your tablet is done downloading, it should reboot.
12. Once rebooted and on the setup screen, turn it off
13. Press the following buttons altogether at the same time: Volume Up+Home+Power
14. It should boot into the recovery. If not, turn off the device and press Volume Down+Home+Power.
15. Once in the recover, using the volume keys to navigate and the power button to select, press "factory reset" or "wipe" and then select "yes" and it will begin.
16. Once done with the wipe, reboot your device.
17. Voila! If I am wrong in something here, hopefully someone can correct it.
Click to expand...
Click to collapse
I did manage to flash the rom from sammobile. I was quite surprised it got stuck during the factory reset. Anyway it is working, and that is the important thing
Inviato dal mio SHIELD Tablet K1 utilizzando Tapatalk