Develop Bugs

[Q] Revert back to S-ON for warranty

I need to send in my phone cause the speaker blew.
Currently I have 2.2 custom ROM with S-OFF. What steps can I take to revert it back to 2.1 S-ON. What order should I take these steps in. Any help is appreciated. Thanks!!!!

paugster said:
I need to send in my phone cause the speaker blew.
Currently I have 2.2 custom ROM with S-OFF. What steps can I take to revert it back to 2.1 S-ON. What order should I take these steps in. Any help is appreciated. Thanks!!!!
Click to expand...
Click to collapse
I doubt it would be necessary. http://forum.xda-developers.com/showthread.php?t=760651 section 5

http://forum.xda-developers.com/showthread.php?t=768295

I basically would like to flash my phone to the stock 2.1 software. As soon I do the script to turn S-ON I am unable to load the stock 2.1 because it is saying it is an older version after it check the PB31IMG.zip file.

paugster said:
I basically would like to flash my phone to the stock 2.1 software. As soon I do the script to turn S-ON I am unable to load the stock 2.1 because it is saying it is an older version after it check the PB31IMG.zip file.
Click to expand...
Click to collapse
Just flash the newest leaked 2.2 Image as verizon is rolling them out anyway. They wont know that it was not an OTA. The softwrae version number and kernal will match the OTA's numbers.

paugster said:
I basically would like to flash my phone to the stock 2.1 software. As soon I do the script to turn S-ON I am unable to load the stock 2.1 because it is saying it is an older version after it check the PB31IMG.zip file.
Click to expand...
Click to collapse
The reason you can't go back with S-On is because your bootloader is too new. Flash the stock 2.1 image (with the 1.x radio and whatnot), re-root the phone so you can turn S-off, flash the 2.1 image again. This time it should work since you are on the correct bootloader.
Ta-DA!

How do I un-root?

I'm trying to unroot my friends EVO. We rooted it back in the day with UNREVOKED. It was the one-click method.
I've searched for guides but can't find any. PLease help.
Again, I am talking about the old Undevoked rooting method we used, not Revolutionary.
How do i unroot?

Flash the unrevoked s-on tool in recovery. Then run an ruu or flash a PC36IMG RUU that matches the version of your bootloader, most likely 3.70.

Go to unrevoked website and dl the s-on file to flash. Ur radio must be no higher than version 2.00.11.19 so u must downgrade that b4 u flash s-on patch. Then just ruu or flash stock pc36img
Sent From My Pocket

4.54.651.1
I am trying to unroot my brother's phone that has 4.54.651.1 on it. Could someone please point me to the right RUU please?
P.S. He was trying to do it himself and he ran the unrevoked file to turn S-ON and he has Radio 2.15.00.11.19 on. What can I do?

Aloupha said:
I am trying to unroot my brother's phone that has 4.54.651.1 on it. Could someone please point me to the right RUU please?
P.S. He was trying to do it himself and he ran the unrevoked file to turn S-ON and he has Radio 2.15.00.11.19 on. What can I do?
Click to expand...
Click to collapse
If you have s-on, then just run a stock ruu.

sitlet said:
If you have s-on, then just run a stock ruu.
Click to expand...
Click to collapse
I tried that but it fails every time.I get the "ERROR[140]: BOOTLOADER VERSION ERROR / The ROM Update Unity cannot update your Android phone. Please get the correct ROM Update Utility and try again.
When I try to do it through the bootloader I do not get to the "update" option. It just fails.

I downloaded this RUU and it went through successfully
RUU_SuperSonic_GB_Sprint_WWE_4.53.651.1_Radio_2.15.00.0808_NV_2.15_release_209995_signed.exe

I have a problem. The USB port is fried. I cannot use it. How can I then flash a stock Rom? I can download something to the phone and flash it , but will I still have recovery after flashing s-on from unrevoked?
Also what Rom can I flash? It must be zip format.

Where did you get the download from Aloupha?
*Edit* Never mind found it. Trying to unroot now.
Another question. I flashed backed to my original backup and the phone looks stock. Do you guys think I could get my camera lense replaced through sprint without doing a full unroot? Phone looks as stock as they come...

AvatarOfFrost said:
I have a problem. The USB port is fried. I cannot use it. How can I then flash a stock Rom? I can download something to the phone and flash it , but will I still have recovery after flashing s-on from unrevoked?
Click to expand...
Click to collapse
Take the card out, put into a card reader, and put the files you need onto the card, then put it back in the phone.
Also what Rom can I flash?
Click to expand...
Click to collapse
Well if you are trying to unroot, you would flash a stock rom.

sitlet said:
Take the card out, put into a card reader, and put the files you need onto the card, then put it back in the phone.
Well if you are trying to unroot, you would flash a stock rom.
Click to expand...
Click to collapse
Do I still have recovery after flashing unrevoked s-on?

AvatarOfFrost said:
Do I still have recovery after flashing unrevoked s-on?
Click to expand...
Click to collapse
Running an ruu will replace the recovery with the stock one.

sitlet said:
Running an ruu will replace the recovery with the stock one.
Click to expand...
Click to collapse
Which, by the way is no recovery.

Well I took my phone into sprint with just a stock rom flash and my phone was repaired without question. Although the rep stated that they don't repair physical damage...smh. I declined to tell him that Sprint has repaired many of my phones of my 10 YEAR tenure.

[Q] Return to stock JB with hboot 1.23 when RUU is here?

Hi.
I have a One X that I have rooted and I am testing ICS rom's, but none give me what I want.
I want to try the JB rom's, and my phone support this.
But if I upgrade to hboot 1.23 will I be able to go back to stock JB and lock the bootloader when the JB RUU is released? This for selling the phone with stock software.

qtekdude said:
Hi.
I have a One X that I have rooted and I am testing ICS rom's, but none give me what I want.
I want to try the JB rom's, and my phone support this.
But if I upgrade to hboot 1.23 will I be able to go back to stock JB and lock the bootloader when the JB RUU is released? This for selling the phone with stock software.
Click to expand...
Click to collapse
You might not be able to flash it directly(version check, im guessing) but you can still flash its contents, and yes you can always RELOCK your bootloader.

Vcek said:
You might not be able to flash it directly(version check, im guessing) but you can still flash its contents, and yes you can always RELOCK your bootloader.
Click to expand...
Click to collapse
Hi.
Not directly? How will this mean in practice? What would I need to do?

qtekdude said:
Hi.
Not directly? How will this mean in practice? What would I need to do?
Click to expand...
Click to collapse
Probably have to extract the rom.zip from the ruu, but I cant see why the ruu wouldn't just flash considering the hboot inside the ruu is just gonna be the same as the one you've flashed... But I could be wrong, I never use ruus anyway.
Sent from my HTC One X

JB Installation Problems

Hi Guys, I've been using Custom Roms a long time so It came... Jelly Beans finally.
I tried to go back to stock...basically I installed a NANDROID compatible with my system...everything went fine till the last update JB...
I downloaded it...OK ,
After INSTALL NOW...It reboots the phone to install...After that, shows a message and go back to BOOTLOADER...I cannot see well the message... What can I do?? It's driving me crazy
Logo HTC and this message...after that...goes back to bootloader...What Happened??
QUOTE
"This build if for development purposes only
do not distribute ourside of HTC
without HTC a writter permission
Failure to comply may
lead to legal action"

blankfile99 said:
Hi Guys, I've been using Custom Roms a long time so It came... Jelly Beans finally.
I tried to go back to stock...basically I installed a NANDROID compatible with my system...everything went fine till the last update JB...
I downloaded it...OK ,
After INSTALL NOW...It reboots the phone to install...After that, shows a message and go back to BOOTLOADER...I cannot see well the message... What can I do?? It's driving me crazy
Logo HTC and this message...after that...goes back to bootloader...What Happened??
QUOTE
"This build if for development purposes only
do not distribute ourside of HTC
without HTC a writter permission
Failure to comply may
lead to legal action"
Click to expand...
Click to collapse
you installed an OTA?

I'm using a Stock from a recovery Nandroid, not mine but the same CID 044... I guess I shold go back to RUU...but I've tried without any success

I can't even use my RUU file...donno why... I have this file: (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed) and It works, not now but It used it once...do you have a suggestion so I can use it again??

blankfile99 said:
I can't even use my RUU file...donno why... I have this file: (RUU_ENDEAVOR_U_ICS_40_hTC_Asia_WWE_1.29.707.11_Radio_1.1204.105.14_release_260743_signed) and It works, not now but It used it once...do you have a suggestion so I can use it again??
Click to expand...
Click to collapse
you are on JB now and you can't run ICS RUUs, you can't downgrade...

matt95 said:
you are on JB now and you can't run ICS RUUs, you can't downgrade...
Click to expand...
Click to collapse
I'm not...I'm on 2.17 yet...JB update does not install...that's the main problem
and I have noticed that NO MATTER I CHANGE...IT WONT CHANGE THIS VERSION... OMG
tks man!

You need to relock your bootloader (if you haven't already) and run THIS RUU.
The problem is that the version of software you're running (2.17) is newer than the RUU you're trying to install (1.29). you can't revert to an older RUU. you can only flash the same version or newer.
Once you've flashed the RUU, you'll be able to download and install the JB OTA.

Sentinel196 said:
You need to relock your bootloader (if you haven't already) and run THIS RUU.
The problem is that the version of software you're running (2.17) is newer than the RUU you're trying to install (1.29). you can't revert to an older RUU. you can only flash the same version or newer.
Once you've flashed the RUU, you'll be able to download and install the JB OTA.
Click to expand...
Click to collapse
Thank you very much man, You renew my faith!!
It will work like a FORMAT SYSTEM with the same Rom?
I'll keep in touch!!

Also, this may sound silly but did you reflash stock RECOVERY?

blankfile99 said:
Thank you very much man, You renew my faith!!
It will work like a FORMAT SYSTEM with the same Rom?
I'll keep in touch!!
Click to expand...
Click to collapse
No worries, let us know how you go, and don't forget the Thanks button.
ArmedandDangerous said:
Also, this may sound silly but did you reflash stock RECOVERY?
Click to expand...
Click to collapse
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.

Well I am currently running Team Venom's Viper but I have HBOOT 1.31. My device's CID is HTC_J15.
I have checked the list of RUUs but unfortunately all of them are older than the version I need, which has to be 3+.
Does anybody know if there's an RUU available for my device? It is an ubranded WWE version, 401 if I remember correctly.

ArmedandDangerous said:
Also, this may sound silly but did you reflash stock RECOVERY?
Click to expand...
Click to collapse
I'm using the same as the NANDROID, taken from it...right?

Sentinel196 said:
No worries, let us know how you go, and don't forget the Thanks button.
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Click to expand...
Click to collapse
That's all I need... I'll give my feedback later.

Sentinel196 said:
No worries, let us know how you go, and don't forget the Thanks button.
You don't need stock recovery to flash an RUU. You just need a locked or relocked bootloader, and a less or equal main-version.
Once you run an RUU, you will have stock everything(including recovery) and will be able to install whatever OTAs are available.
Click to expand...
Click to collapse
In my experience the 2.17.707.xx RUU Asia WWE does not work properly. It does its thing installing everything, relocks the bootloader but somehow it does not reflash the recovery. After 4 hours trying everything under the sun, I gave up and looked for a nandroid of 2.17 for CID_044 and restored from that, reflashed stock recovery and went to town with the OTA.

That's very strange, no such problem when I did the same thing. You'd think it would throw an error or something if a component of the image failed to flash.
Glad you managed to figure it out!
Did you run it when your bootloader was unlocked? Maybe that's the problem? I ran it with the bootloader relocked and didn't ahve any problems. I was under the impression you couldn't run an RUU with an unlocked bootloader, but haven't tried it myself.

Refer custom to stock thread posted earlier. Go through step by step procedure. It will help u to be on stock Rom. After that flash any Rom suitable to your CID only
http://forum.xda-developers.com/showthread.php?t=1859714
Hit Thanks if u like.
Sent from my HTC One X using xda app-developers app

Got It guys!!
What I did... NOTHING else...
Only Reboot the phone...wait to initialize completely, then reboot again, when came a little update about 1.25mb...installed and reboot...after that...JB update installed correctly.
If someone else needs...Someone like me who relocked the phone waiting for JB and Has problems
1. Unlock Phone
2. fastboot flash recovery recovery.img (from nandroid 2.17)
3. fastboot flash boot boot.img (from nandroid 2.17)
4. fastboot erase cache
5. restart bootloader (I like to do this way)
6. Install RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.17.707.3_Radio_2.1204.135.20_release_278245_signed on windows
7. Wait to boot completely, then restart phone.
8. Update Software ...a little update came before JB. (about 1.25mb)
9 Reboot phone.
10. Update Software... finally to JB.
Thanks guys!

Sentinel196 said:
That's very strange, no such problem when I did the same thing. You'd think it would throw an error or something if a component of the image failed to flash.
Glad you managed to figure it out!
Did you run it when your bootloader was unlocked? Maybe that's the problem? I ran it with the bootloader relocked and didn't ahve any problems. I was under the impression you couldn't run an RUU with an unlocked bootloader, but haven't tried it myself.
Click to expand...
Click to collapse
The RUU ran with no problem, and it relocked my bootloader, but it still did not receive any OTAs. So I had no choice but to do a nandroid restore instead (recommended anyway )

Problem with RUU

Hello! hopefully someone can help me I stand
I commented:
I have a Verizon One with hboot 1.54, yesterday I managed to unlock the bootloader and make S-off, then I take on the task of putting the HTC_304 cid (Spain) and try to load an official stock RUU rom but always gave me Error 158 , then switch to Super-CID but I continued to set the same mistake and then make the decision to install recovery and change to HBOOT 1.44, I download the latest methyl Revolution and by recovery, made ​​the installation complete without errors, but me no system load.
The bootloader and fastboot also enter without problem and recovery, but I can not enter recovery to sd, tells me that he can not mount and went back to try to load the rom by RUU but I always get the same error (158).
Hopefully someone can help me and do not know what else to do

Well, you need to use only Verizon firmwares for this device. You can't load an ruu from another device. It won't match up and therefore either not work or worse, brick your phone.
Sent from my SCH-I535 using Tapatalk 4
If I've helped, please hit the thanks button

tylerlawhon said:
Well, you need to use only Verizon firmwares for this device. You can't load an ruu from another device. It won't match up and therefore either not work or worse, brick your phone.
Sent from my SCH-I535 using Tapatalk 4
If I've helped, please hit the thanks button
Click to expand...
Click to collapse
then to have put the Super-Cid and 1.44 hboot not give me the freedom to put a European rom?
to be so I have to go back to hboot 1.54 and install an official RUU from Verizon?

The only way I can think is metiante cmd roms charge with all-in-one, through the RUU, but I always get this error.

ak074 said:
what RUU are you trying to use and where did you get it?
Click to expand...
Click to collapse
I've been trying to get this
http://forum.xda-developers.com/show....php?t=2485319 (Deodexed Full ROM version: 1.10.605.10)
I do it with the application all-in-one and the factory ruu flash zip option, correct?

maybe try with the new hboot posted by rumrunner?
I believe it is ENG hboot
Once superCID you should be able to flash any RUU..
are you doing it using FastbootRUU??