My Blackberry's had a magnet sensitivity or something that when in a case/holster,etc it would go into a "screen off" mode, or if enabled "locked".
Does anyone know if the EVO has this same thing. I absolutely hate having to continuously push the power button to get the screen to come on when I take it out of my pocket and would love to get a case if this works. It would be cool that the screen would automatically turn off when putting in case, and when pulling out, the screen would come on and all I would have to do is swipe to unlock it.
I searched around but couldn't find anything related to my question... THANKS
sounds like what you really need is another blackberry.
I believe there is some type of sensor present, but it is used to put the device into carkit mode. I've already had this go haywire and had to get a replacement EVO. With the open source opportunities our devices present I'm sure someone could change the function of this sensor with time, but at present I don't believe this function is present.
Yeah, nothing like that as of yet, but I don't see why someone couldn't build it in. There are only two issues that I could see arise from this though:
Issue 1: If you ever bring your phone close to a magnet, won't it lock it? I know, how rare could that happen, but still.
Second: You would have to have either an app running at all times to detect this, and thus further diminish your battery life or you would need it built into android. Good luck with the latter, but the former is probably doable (kind of like the Motorola Droid's docking station thingies.)
All the app would need to do is detect the magnetic pull and lock the phone, then when goes away while in a locked state it unlocks it.
Either way, there's nothing out as of yet, and I doubt there will be, so don't hold your breath.
Edit: Oh yeah, and I wonder if maybe RIM has this idea patented? If so, then you'll never see it. I'll bet it's patented since I don't know of any other phone that does it. Though, my knowledge of phones is limited, still...
Related
So... all of a sudden, everytime i slide the screen up, it shuts the screen off. I slide it back, hit the power button a few times, then it turns back on?
NRG GTX 5/9 release
TMO USA
Is my screen busted?
Power off your phone, remove the battery and then put it back in, making sure it fits in there snuggly.
That has happened to me, and removing/replacing the battery fixed it.
Yes, as Amy noted this behavior is often attributed to the battery not sitting exactly right in the compartment. Sometimes just popping it out and back in is enough, but some people have reported needeing to slip a small piece of paper or something similar under the battery cover as well to help keep it snug. (It seems that the sliding motion can be enough to shake the battery off the contacts if it's not secure enough).
Let us know if that clears it up
okay. what the deuce.
my tp2 just literally started doing the same.
earlier today it was perfectly fine.
but now.
i slide out the keyboard and the screen goes blank.
i tried the remove battery and restart.
didn't help.
i tried the paper between battery and cover.
didn't help either.
the screen only goes blank when completely slid out.
if i hold it open just before completely open the screen is still on.
any suggestions?
thanks.
Yea, none of those things worked. However, keeping the battery snug helped with the issue of not hearing anything through the handset.
It honestly sounds to me like both of you are dealing with a loose connection between the screen and the motherboard somewhere, either power or video feed, can't say for sure which. Unless you're willing to disassemble your rhodium (which isn't impossible, just complex), it sounds like it's time to send it to a service center (for AT&T) or to HTC, since that would be a warranty repair.
I hope that this is just freak coincidence that both of you had this happen just now, and not a sign that we're all at risk of having the same issue eventually
How long have each of you had your phones?
EDIT: One more question for you guys...whatever is on the display on your screen rotates into landscape before the display shuts off right?
sirphunkee said:
It honestly sounds to me like both of you are dealing with a loose connection between the screen and the motherboard somewhere, either power or video feed, can't say for sure which. Unless you're willing to disassemble your rhodium (which isn't impossible, just complex), it sounds like it's time to send it to a service center (for AT&T) or to HTC, since that would be a warranty repair.
I hope that this is just freak coincidence that both of you had this happen just now, and not a sign that we're all at risk of having the same issue eventually
How long have each of you had your phones?
EDIT: One more question for you guys...whatever is on the display on your screen rotates into landscape before the display shuts off right?
Click to expand...
Click to collapse
i have own the phone for about three weeks...
though. bought it used from a friend who had it for four months.
but my friend bought it used from somebody too...
aka. not sure how long it has been used.
the display is rotated. and stays on as long as the right side is held.
before the 'tilt piece' is revealed. as soon as it is. the screen goes blank.
and i believe it would be the video feed...
i can still type with the keyboard. just can't see what i am typing.
unless i hold the screen from sliding completely out on the right.
and about the warranty...
would i have a warranty with htc still?
don't have proof of purchase.
just the phone and original box.
thanks.
My AT&T Tilt 2 has been exhibiting this behavior for some weeks now. It seems to be centered around the keyboard slide, but the behavior comes and goes. I found that slamming the phone on the desktop would bring it back to life for a little while, but then it would start to clap out again in a few days. What a pile.
Anyway, I have a fresh one from AT&T to swap out. Now all I have to do is get all my applications and stuff transferred over to the new phone before sending the craprod back to them.
sh4d0w86 said:
i have own the phone for about three weeks...
though. bought it used from a friend who had it for four months.
but my friend bought it used from somebody too...
aka. not sure how long it has been used.
and about the warranty...
would i have a warranty with htc still?
don't have proof of purchase.
just the phone and original box.
thanks.
Click to expand...
Click to collapse
Oh boy...yeah I didn't realize you'd gotten it third-hand. Well it has been less than a year since the Rhodium was released, so it's possible that HTC will still honor the 1-year manufacturer's warranty, but I can't guarantee it. My suggestion would be to just contact HTC America's service group (1-888-617-1113) and see what they say.
Best case: they agree to cover the repair
Worst case: an example of one of the risks you take when you buy something through "unofficial" channels
Yea luckily for me, I bought it second hand, but it was purchased from a retail store, meaning I got a warranty exchange. I just sent it back.
having same issue
im having same issue, when the phone is slid open, goes black, nothing gets it back on, the buttons light up, display dead
however, if i place it in stand by via power button in regular mode, then slide it open, it works, ive rattled and shook the phone, never goes back off, im typing this with it open and tilted....
any ideas?
prob leaving the htc community, samsung captivate, blackberry torch, or htc aria are my choices from at
So whenever I talk to my wife she always ends up hitting buttons on the screen. (mute, speaker, etc) I told her that the screen should automatically turn off and that maybe something was wrong with her device. As soon as I got home I tested it and it worked just fine. I couldn't get it to happen, light sensor was very responsive.
Somehow she manages to hit buttons and I have no idea how. I covered up the light sensor and tried hitting every button/screen area and nothing happened.
Has anyone else experienced this before? Is there something I can settings/mods wise to help?
DanBergundy said:
So whenever I talk to my wife she always ends up hitting buttons on the screen. (mute, speaker, etc) I told her that the screen should automatically turn off and that maybe something was wrong with her device. As soon as I got home I tested it and it worked just fine. I couldn't get it to happen, light sensor was very responsive.
Somehow she manages to hit buttons and I have no idea how. I covered up the light sensor and tried hitting every button/screen area and nothing happened.
Has anyone else experienced this before? Is there something I can settings/mods wise to help?
Click to expand...
Click to collapse
Woman + X = No longer functioning properly
illogic6 said:
Woman + X = No longer functioning properly
Click to expand...
Click to collapse
:X
Another funny thing is she said her boss at work has the same problem (female) and her husband has no issue.... Ha! I don't think they have Evos though.
my wife was having the same problem and we narrowed it down to her hair causing interference with the screen sensing that her face was against it. dont know if that makes sense but seemed logical to us and now that she tries to be aware of it and move her hair out of the way the problem doesnt seem to exist. hope this helps.
freaknjoe said:
my wife was having the same problem and we narrowed it down to her hair causing interference with the screen sensing that her face was against it. dont know if that makes sense but seemed logical to us and now that she tries to be aware of it and move her hair out of the way the problem doesnt seem to exist. hope this helps.
Click to expand...
Click to collapse
Weird! Does the screen actually turn on then? I should watch the screen next time she makes a call on it.
yeah the screen was turning on while she was using it. i think whenever she would basically readjust the phone against her head it would happen if the hair would cause interference...again i'm not claiming this is some scientific answer but its what we found seemed to be causing issues for her
freaknjoe said:
yeah the screen was turning on while she was using it. i think whenever she would basically readjust the phone against her head it would happen if the hair would cause interference...again i'm not claiming this is some scientific answer but its what we found seemed to be causing issues for her
Click to expand...
Click to collapse
I see, thanks.
My wife had the same issue...earrings.
Yep, Yep. My wife has the same issue but I've never had a problem. I'm going to show her this thread so that at least she knows it's not just her. lol.
Lappie2010 said:
My wife had the same issue...earrings.
Click to expand...
Click to collapse
How would the earrings affect it?
I think it's actually the proximity sensor being highly in tune to how close it needs to be to the ear/face. It takes very little movement of the phone during a call to trigger the sensor and turn the screen back on. They probably don't even realize they're moving the phone as much as they are.
Crotchety said:
I think it's actually the proximity sensor being highly in tune to how close it needs to be to the ear/face. It takes very little movement of the phone during a call to trigger the sensor and turn the screen back on. They probably don't even realize they're moving the phone as much as they are.
Click to expand...
Click to collapse
During a call, I pulled the phone away, moved it around, etc and watched for screen to come one. It did not come on easily. I don't get it.
I need to watch her during a call and test some things.
My sis has the same issues with the moment, and I tried it out and it was fine. She does seem to use it outside her hair and does have a lot of earrings. Though this is the Moment, it still runs android and has the sensors. I'll let her know and see if she'll enjoy her phone again lol.
ReFLeX135 said:
My sis has the same issues with the moment, and I tried it out and it was fine. She does seem to use it outside her hair and does have a lot of earrings. Though this is the Moment, it still runs android and has the sensors. I'll let her know and see if she'll enjoy her phone again lol.
Click to expand...
Click to collapse
Still not sure what the issue/solution even is.
She picked up my phone last night and accidentally hung up on the person during the call! I didn't get a chance to see what happened...
She's starting to hate these phones. I need a solution.
Not a joke...but are these ladies blonds? At start of thread I was thinking hair color or earrings too. But earrings shouldn't impact the sensor as it is up top of phone and earrings would be down toward the screen.
But...if their hair was very light color...and they had phone only loosely pressed to head, I could 'guess' that the hair had enough light reflecting through it to set off the sensor.
Another thing to check on the earring side....what part of phone contacts first...do earrings hit the screen before head covers up the sensor?
My wife had dark brown hair :x
My wife too. Dark brown hair. With and without earrings. Swapped out one device, same problem. She even made it happen on mine.
I have seen it get in a mode where the proximity sensor seems to get reversed. Near head, screen on, away from head screen off. A button gets pushed at some point and then when the screen is on you can't un-mute, un-speaker, or answer a returned call from the one she just hung up on.
I think we are going to have to get her a different phone
I have the same issue but it only seems to come up with AOSP ROM's (Cyanogen & UD)
If I call Sprint and hit the prompts followed by putting the phone to my ear it presses other numbers. I think there is a delay in the proximity sensor that's causing this. I don't have long hair and my face is clean shaved so it's not that.
If I go to show someone that when everything works perfect. It's like when you call tech support for Dell, Netgear, etc. It works when you're on the phone with them and when you get off it doesn't.
I've noticed this in the past. If you are talking on the phone and you cant it just a little bit away from your ear, towards your face, you can see the backlight come back on. Also, hair can carry a static charge. So if your ladies cant the phone and the screen turns on, their hair could trigger a button press.
So my phones earpiece began to cut in and out, which I found to be a chafed and broken flex cable. No biggie, I ordered a replacement piece and waited for it to show. As I waited the phone began to get worse, I lost the earpiece entirely, the leds stopped working as well as the sleep button. The screen, now only able to be woken by sliding, would not come on when slid out, but only once it returned..also the screen would shut off when I would slide it out again.
I have seen disassembled the phone again and installed the new cable and all is well, with one exception. The slide function of the screen no longer works, period. It will not wake, it will not rotate, and the keyboard doesnt illuminate unless I press a key. I have been through this phone 4 more times now and I simply cannot pin down exactly what tells the phone that it has been slid. I have heard talk of magnets, but found no sensor or magnet, I saw small contacts..that are all functioning properly. There is no cable or connection to the screen portion that connects to any sort of switch that I can see.
Does anyone know what triggers the slide?!
Sorry mate, im not an expert but I thought this may help.
https://fjallfoss.fcc.gov/oetcf/eas...e=N&application_id=259614&fcc_id='NM8RHOD300'
The link is to the FCC website showing links to internal photos of the phone, SAR values, micellaneous stuff, etc.
Maybe a different perspective of the phone might help.
Hope this helps you
Hello all! I have a problem with my TP2’s unlocking “feature”. I am very aware of the magnetic leather case issue, I found that out when I attempted to purchase a case and my screen went nutty. This has been a annoying more than anything. The phone is only 3 months old. I have tried a full Hard Reset, and I’m currently running on of MR X’s rom, so I don’t believe it’s a software issue. There is nothing magnetic around me when it happens. I just dial people randomly now. I can see theres a registry edit, but I really want to keep the original function of unlocking with opening the keyboard, and pulling the stylus out. I’m thinking that I’ll have to do the registry edit or end up with a locker app, like throttle locker. But I always check here 1st, for suggestions. Thanks for any info or help you can give. P.S. This was a brand new replacement phone, and is about 3 months old. It has only been doing this for a few weeks now, but it started way before any "tweaking".
Ok, I 1/2 figured it out. If I Touch the screen the wrong way, and it turns the smallest amount clockwise, I can hear a "click" and the screen lights up, and unlocks, as if i opened the phone. My guess is that my screen is wicked loose. But my question is, is it a switch that activates the unlock? I was under the impression, that both the stylus, and the screen slide work off of magnets, and thats what tells it to unlock. But the clicking noise sure does sound like a switch. Thanks Again!
Ok, last time. Its not a switch which knew, but was hoping for. Switches can be easier. As far as the unlocking problem, its amazing how sensitive it is, it seems if i blew on it hard enough it'll unlock. I did the reg edit, which didnt disable my "stylus to wake", which is great, so I'm a happy camper. Someday i'll take it apart. lol
Its been some days, I'm experiencing this weird touch screen problem.
My DZ touch screen doesn't respond properly.
For example:
If i see an image and slide just one finger up and down then it would zoom in and out. And then the whole screen becomes unresponsive.
It seems as if, its touched by itself. Even the softkeys would go numb. Only the haptic feedback of my search button works at that moment.
But the trackpad works perfectly.
But, If i lock and unlock the screen using power buttons, it would work properly for some few moment and then again the problem repeats.
At present I'm repeating this process of locking and unlocking screen to use my phone.
One even worst weird thing is that, if the device is connected to a charger and kept on the table or floor. This problem doesn't occur.
I have done system format, restored my nandroids and even changed Roms. The problem still exists.
Please note, i don't use any Casing or covers that would press the device hard for malfunctioning of screen. I have even removed and replaced my screen guard.
I'm sure, its not a software issue.
And even i dont think its a strip issue, because i dont use my physical keyboard always.
Can anyone say what hardware issue it might be..?
Or what i need to do? I'm really out of options.
Do i have to replace my whole screen or the digitizer..?
Thanks...
Thats no fun,
As you stated it's more than likely a hardware fault, the two most likely culprits would be the digitizer or the main flex cable
Which would be this and this
both relatively easy to replace depending on your experience
in 4.x and up ROMs check the developers setting to show touch or use apps like
z device test
or
yet another multitouch test
these wont help you fix the issue but may show you where the bad points are on the screen
best of luck
I know the problematic spot. Its near Search softkey. Even Yet another multi-touch test would stuck at that spot....
As you can see in the image, that i'm not holding anywhere, still it shows that somewhere around Search softkey its touched by itself.
In second image, If i move my fingers around, it would show the other touch responds, but if i slide near search, it would go and stuck there itself.
So, i guess i would first go with the flex cable.
In actuality I'm leaning toward the digitizer in your case, but its possible to be either.
And if you have a spare phone it may be worth disassembling even without buying anything. On a G1 I once fixed a similar issue just taking out the digitizer and cleaning the contacts on the ribbon and the edges of it as well, when I put it back it worked like new. I think some dust may have gotten into the edges but it may be worth a shot before buying anything... But could make matters worse so if you don't have a spare, buy parts first
Best of luck
Sent from my Nexus 7 using XDA Premium 4 mobile app
I guess i should try disassembling and clean it first. If it still persists then i would go for digitizer.
And thanks for giving a hope.
Thanks...