Is My Tilt 2 Dead? - Touch Pro2, Tilt 2 Windows Mobile General

I checked email then I sent a text. A few minutes later, I got a response. I hit REPLY and the screen went white. I don't know why. It's never been dropped or put in water, etc. The phone had been in my pocket all day and was close to a full charge. I couldn't power down so I removed the battery and turned it back on. The phone vibrated as it does when it boots up but the screen remained black. I flipped out the keyboard and it was backlit as usual.
I tried a few times and never got anything going. The screen remained black but the phone got hot. Just now, I noticed the amber light blinking but it went solid when I plugged in the charger. I attempted to power it up once more and called from my landline- goes straight to voicemail, no rings. Hmm. Is my Tilt 2 Dead?
Any advice on how to resurrect my phone? AT&T gave me this refurbished model about 4 months ago (60 day warranty?) to replace the Fuze that died at 13 months (12 month warranty). I just want a phone that can last as long as my contract.

try to put it in bootloader mode.
do this by holding the volume down button and powering on the device (if its already on then volume down button and press the soft reset button on the side of ur device with the stylus). Keep holding the volume down button until the 3 colored screen comes on with text in red.
if you can get it in bootloader than you can save the device
Sometimes mine hangs on startup several times in a row, to fix it, i take out the battery, put it back in, hold down the power button and volume down button till its in bootloader then soft reset with the button on the side of the device and it boots up
if that doesn't work then you may need to hard-reset/flash a new rom (all your data will be erased). If nothing comes on the screen then your screen could be dead.

I charged it all night. When plugged in, the amber light is solid. When unplugged, the light turned off. The phone doesn't power up.
It did not respond to a soft-reset (holding the volume down button and powering on the device) nor a hard-reset (press and hold both the send and end hardkeys).

AT&T is telling me it's dead. Um, I've got a different ROM loaded on this. Can I return it in this state? If they cant resurrect it, it doesn't matter?
Do I need to restore factory settings and, if so, how?
And, Warranty Dept. wants me to buy another one. They gave me this refurbished one four months ago with 90 day warranty. What are my chances here?

cam123 said:
I charged it all night. When plugged in, the amber light is solid. When unplugged, the light turned off. The phone doesn't power up.
It did not respond to a soft-reset (holding the volume down button and powering on the device) nor a hard-reset (press and hold both the send and end hardkeys).
Click to expand...
Click to collapse
If the indicator light never went green, the battery may be at fault. Just a thought.

I have heard of the black screen that comes up and ppl have to soft reset to get anything to work. Never had this problem till lately. My fone was on and plugged in all nite. Never had a prob with the battery, only had this fone 3 months and now all nite and day the screen has been goin black then not waking up at all. I did install Cookies Home Tab and the CTHE Editor last nite along with the newest SRS WOW HD sound.... anyway, put my fone on charge, left it on as I always do, woke up today and had no way up waking it up, and the charge light was still orange. I took off the back and used the reset button on the right to restart it. Unplugged it, then plugged it back in. The light immediately turned green yet when the device powered on and the screen went to black, it would NOT come off the black screen. I checked the settings for the lock screen, nothings on... I am using Energy ROM 6.5 OS 5.2.23569 build 23563.5.5.0 ... awesome ROM and yet Ive never had this prob. Had this ROM for the past 2 weeks without a hitch, installed Cookies Home Tab and the Editor progs and now this. ... any help?
EDIT: Also in the time the screen was blacked I never got a single text, MMS, fone call or email...

panthersdzynes said:
I have heard of the black screen that comes up and ppl have to soft reset to get anything to work. Never had this problem till lately. My fone was on and plugged in all nite. Never had a prob with the battery, only had this fone 3 months and now all nite and day the screen has been goin black then not waking up at all. I did install Cookies Home Tab and the CTHE Editor last nite along with the newest SRS WOW HD sound.... anyway, put my fone on charge, left it on as I always do, woke up today and had no way up waking it up, and the charge light was still orange. I took off the back and used the reset button on the right to restart it. Unplugged it, then plugged it back in. The light immediately turned green yet when the device powered on and the screen went to black, it would NOT come off the black screen. I checked the settings for the lock screen, nothings on... I am using Energy ROM 6.5 OS 5.2.23569 build 23563.5.5.0 ... awesome ROM and yet Ive never had this prob. Had this ROM for the past 2 weeks without a hitch, installed Cookies Home Tab and the Editor progs and now this. ... any help?
EDIT: Also in the time the screen was blacked I never got a single text, MMS, fone call or email...
Click to expand...
Click to collapse
OK, now it is clearer. It happened AFTER you installed software. You need to do a hard reset.
Power down the phone. Hold both left and right phone keys (red and green) while you hit the power button. The phone should reset itself back to factory condition. Unfortunately you will lose all data on the phone (the SD card data should be OK). This should fix your problem.

Yeah, its totally dead now except.... when plugged into the charger, I get an amber light. I will stop by a store and try a different battery.
By the way, AT&T Customer Service told me they will not replace my 4 month old phone because it is past the 3 month warranty.
stevedebi said:
If the indicator light never went green, the battery may be at fault. Just a thought.
Click to expand...
Click to collapse

stevedebi said:
OK, now it is clearer. It happened AFTER you installed software. You need to do a hard reset.
Power down the phone. Hold both left and right phone keys (red and green) while you hit the power button. The phone should reset itself back to factory condition. Unfortunately you will lose all data on the phone (the SD card data should be OK). This should fix your problem.
Click to expand...
Click to collapse
Already done that Steve with no luck. Next step?

If the Tilt 2 is dead, I have to replace it. Any suggestions? I was happy with this model. My big requirement is real keyboard.

if its dead its dead... if you need another just go get another I guess.... Sounds pretty crappy though. I got my phone in December and just got a warranty replacement today. They said my warranty was good till the 1 year point of when the phone was purchased or 90 days after I received the new phone (if it was close to the end of my original warranty) I assume you were out of your original warranty or bought a used phone or something. But yeah... try another battery before diving in to another phone for sure.

Possible fix
Ok, Ive kept lookin for this solution and so far, its worked. On the lock screen, especially with the new custom ROMs, the lockscreen has to be set to "classic". Something about the new Slide to unlock feature is killin the screen to black, and that makes the fone unusable... meaning when the fone goes to black, it will ONLY charge. No fone calls, no texts recieved, no emails, no nothin... calls go straight to voicemail when ppl try to call u. (when u restart the fone u may get ur emails and any MMS messages, but not texts or missed calls) If u have the Cookies Home Tab, like me, it would be labeled "Windows" lock screen that u will need. (From Home screen, click "MENU", then "Cookies Home Tab Editor", then "locksreen Settings", then under Unlock Style, click "Windows". then click "menu" at the bottom of the same screen, then click "apply settings". When u exit, Sense will refresh and ur good to go ... Ill repost in a few days to see if thats it or not.
Also I heard less talk, but some about it being an issue with the SD card. That one said to remove ur SD card, install a new ROM and reformat ur card before installing it back into the device... *(Be sure to transfer all info on card to PC before u format, formatting will erase everything from the SD card)*

Related

TP2 Is On But Screen Black? Help!

I'm wondering if anyone has found a fix for this. I have a Verizon TP2, and yesterday the screen wouldn't come on. I can put the volume up and down (and hear the volume tones), press the hardkeys on the bottom front and those lights come on, slide the phone open and the keyboard backlight comes on. The screen itself won't light up however. If I soft reset with the internal reset button, or take the battery out then put it back in, the screen works fine until the first time I press the standby on the top left of the phone to darken the screen. Once it's dark, it stays dark until I pull the battery again. I can also receive calls, but the incoming call doesn't light up the screen either. I've already tried reflashing my ROM (which I know is a working ROM as it's the same one I've used for months). Ideas? Help!
Sounds like a rom issue or software issue. Go back to stock rom. If problem continues send for a replacement. Also do you have throttlelock or other locker installed, if so uninstall and then test.
Had a similar issue out of the blue yesterday. Phone would go to sleep and not wake up unless it was reset. It was like the power button was not connected. I had to do a hard reset and load up a saved backup. All is good now. Somtimes files get corrupt.
This has been happening to me over the last couple of weeks. It can be okay for two or three days and then happen twice in a day.
I'm on the 6.5 stock ROM, the only thing I've changed recently is the SD card. It's not so bad that I'm going to Hard reset yet (too many settings and high scores to be lost!) but if it does I'll have to. I'm not inclined to flash another ROM given I might have to send off for a repair sometime soon though.
Well my issue is that it's happening even after reflashing a rom, both my original rom and the new Verizon 6.5 upgrade rom. The phone is clearly on, but the screen backlight isn't coming on. I can even press on the screen and hear the dialpad tones as if I'm about to make a call. Is there some sort of reset that might work aside from taking the battery out for awhile? I've tried that, but so far that hasn't worked.
Hmm - sounds like a hardware issue which is more worrying, have you tried HTC support?.
HTC support as in call HTC directly, or do some sort of HTC forums? I've always received my support from XTC
Still having phone issues. I can receive still, but once the screen goes to sleep, that's all she wrote till I pull the battery again.
Well it turned out to be a hardware issue (something loose in the base). I accidentally discovered that if I pressed hard on the headphone or power jack on the bottom of the phone, that the screen would come on. Called Verizon and they overnighted me another free of charge. This one is working great so far...
I got a similar issue, mine screen turn off when fully slide out the keyboard. I was told it could be the "flex".

Desire won't boot

Any problems with the Desire anyone?
Got mine last night, put my SIM in and charged it for four hours, turned it on and can't get to do anything with it.
I'm on T-Mobile and get a pink circle solid pink trailing off (I,m guessing this maybe chases itself around like the busy cursor in Vista) then it shows the htc splash screen, white background with htc in the middle in green letters, this stays a second then goes off for then the splash screen again for a second then off for two etc., you get the picture. That's all it does, will not turn off you have to take the back off and remove the battery, tried rebooting several times and always the same. I put it back on charge overnight and tried it again this morning and the same, left it on for about twenty minutes to see if it should do this for a while and the phone and screen get quite warm.
Well hacked off!! Can't even take it back 'cos it's Easter Sunday and everywhere is shut!!!
Anyone had similar experiences?
As I can't reset via the phone software I did the phone button one, see below, still with no improvement. Mine is going back tomorrow.
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.
With the phone turned off, press and hold the VOLUME DOWN button, and then briefly press the POWER button.
Wait for the screen with the three Android images to appear, and then release the VOLUME DOWN button..
Press VOLUME DOWN to select CLEAR STORAGE, and then press POWER.
Press VOLUME UP to start the factory reset.
Cheers.
wow seems odd, usually if ts defective it wouldn't show you the boot screen even. but this looks like a software glitch, somehow, .. but again, if its software than you shouldnt be the only one experiencing that
thanx for sharing, .. , hope you can get a replacement ASAP
Other users seem to be experiencing the same problem, I've had a look on the T-Mobile forums and it's reported there.
Sorted, swiftly replaced this morning, this phone is awesome!

[Q] Need Help in Laymen's Terms...Tilt 2 Stuck on Red, Green, Blue, and White Screen.

I have a HTC Tilt 2... I have been having a ton of problems with this phone but when it really freaks out, I usually take the battery out, let it sit a few days and then it starts working again. My phone started doing some funny things today so I restarted it as usual, it freezes and I remove the battery. When I turned it back on I got a red, green, blue and white screen with text:
RHOD300 32M MI-BC
SPL-0.87.0000
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
498, 526 792,855
795,211 214,211
223,845 Calibrated
This has never happened before.
This RGB&W screen used to say serial when it first happend a few hours ago but then I installed ActiveSync and plugged it into PC, now says USB.
ActiveSync won't recognize my device, it does appear in My Computer.
I tried following directions in another forum to turn the device off then hold the pickup/hangup/power button at the same time...a different screen appeared than the forum directed, a gray screen with "Trigger Ramdump Mode"...then I couldn't do anything.
I can restart it back into the tri-color screen...
I need help in laymen's terms. I've never tried to change anything about the phone's operating system, I've never done an update or anything, I do not have the Tilt2 CD.
Right now I have my SIM card and my SanDisk card removed, I was afraid it could get erased when I tried the pickup/hangup/power button trick.
PLEASE SOMEONE HELP!!!!!!!!!
This screen is called the bootloader. Its used by technicians (or more advanced users) to load the OS or "ROM" onto the phone. It may be stuck in bootloader because some of the OS files are damaged or missing, and the OS is not booting up. Or possibly even a hardware failure.
Pulling the battery may/may not be the culprit. I've read someone on here mention that pulling the battery can corrupt files on the phone. If the phone is lagging, frozen, then pulling the battery is not the correct way to restart the phone. The correct method of restarting the phone by soft reset is done by sticking the stylus into the small red hole/button on the side of the phone, while the batter cover is off:
http://www.hardreset.eu/htc_touch_pro_2_rhodium_hard_reset_soft_reset_en.html
Pulling the battery is only a method of last resort, as the soft reset button will work in almost all cases.
Hard reset by holding TALK, END and POWER is probably not going to work. It requires the OS to be working, and you are not even getting to the point that the OS is booting.
Its supposed to say "USB" when the phone is connected to your PC via the USB cable. If I remember properly, it will say "Serial" in bootloader for a second when you plug the phone to USB, and switch to saying "USB" after that. USB is a form of serial connection, after all (USB = Universal Serial Bus). As long as it says "USB", you are in somewhat good shape, since it SHOULD allow you to try the following.
Try downloading the latest ROM from HTC. This is actually a newer version than the ROM that was originally on your phone, but still "official" ATT software. And by most accounts, better than the old ROM. Since its official software, installing this will not endanger any warranty you may still have on the phone.
Its the first file on the following page ("ROM Update"):
http://www.htc.com/us/support/tilt-2-att/downloads/
With your phone connected to your PC by USB, run the .exe ROM update file and follow the instructions that come up on your PC screen. It should work. Try it and let us know.
Bear in mind, you will lose any personal data you have on the phone (contacts, texts, emails, etc). But you've probably already lost those.
Its possible there is some other way out of it, I certainly don't know all the tricks. But in searching around this site, being stuck in bootloader seems to require flashing a new ROM to get out of it. And it seems that you are prepared to lose your personal data, based on the fact that you were already trying to hard reset (the TALK, END, and POWER button process) which also dumps all your data. And flashing the official ROM is really pretty easy to accomplish. Just a pain that you have to re-setup the phone again, since it will basically be returned to factory condition (but in this case, a slightly newer version of the OS).
The SAME thing happened to My HTC Tilt 2 an Hour ago (1/13/2010 4:46pm)
The same exact thing occurred to my HTC Tilt 2 today. It is stuck on the red green, blue and white screen with the same yellow 'config' type message . The white bottom strip has the black letters "serial" typed in.
My problem also, is that the phone stays "on" until i pull the battery out. The moment i place the battery back in the phone, the keys stay lit up instantly and the screen is black. When pressing the power button, then i get the same red, green, blue and white screen.
Ive tried holding the talk/end/power buttons all at the same time, it doesnt make a difference. So i cant get to the step where you press the "volume up" key so to initiate the master reset.
Ihad no idea the HTC Tilt2 would just fry like this. I had no additional apps that were unusual to the norm, i even had more free space than used on the set. its not like the phone was over loaded.
Hmmmmm.... help!!!
Re-read above about "soft-reset" and you might want to try reflash your phone.
Sent from my MSM using Tapatalk
RicoATT said:
The same exact thing occurred to my HTC Tilt 2 today. It is stuck on the red green, blue and white screen with the same yellow 'config' type message . The white bottom strip has the black letters "serial" typed in.
My problem also, is that the phone stays "on" until i pull the battery out. The moment i place the battery back in the phone, the keys stay lit up instantly and the screen is black. When pressing the power button, then i get the same red, green, blue and white screen.
Ive tried holding the talk/end/power buttons all at the same time, it doesnt make a difference. So i cant get to the step where you press the "volume up" key so to initiate the master reset.
Ihad no idea the HTC Tilt2 would just fry like this. I had no additional apps that were unusual to the norm, i even had more free space than used on the set. its not like the phone was over loaded.
Hmmmmm.... help!!!
Click to expand...
Click to collapse
Read my post above. Your OS is missing or damaged, and you need to reflash (re-install) it.
Master reset re-loads the OS from the ROM area of your memory. The ROM is damaged, so their is nothing to reload. That's why its stuck in bootloader (tri-color screen).
redpoint73 said:
Read my post above. Your OS is missing or damaged, and you need to reflash (re-install) it.
Master reset re-loads the OS from the ROM area of your memory. The ROM is damaged, so their is nothing to reload. That's why its stuck in bootloader (tri-color screen).
Click to expand...
Click to collapse
_______________________________________________________
Today, i stuck the battery in the phone (Tilt2) pressed the hard reset keys. THIS time it allowed the volume-UP key to finally kick in the reset to default cycle. I got the phone working again and have restored my last backup So, I havent lost anything.
The only problem now i am noticing is the light on the keyboard never goes off. Even when I power the phone down, "the keyboard stays lit".. I am having to remove the battery just to keep it from draining when the phone is not in use.hmmm. is there a regEdit key I can modify that may turn off the keys? id rather have no light at all over no battery juice. If i can edit the key to turn off the backlight on the keyboard permanantly , this will be a temp fix for me until i get a new phone.
as anyone ever experienced this?
RicoATT said:
_______________________________________________________
Today, i stuck the battery in the phone (Tilt2) pressed the hard reset keys. THIS time it allowed the volume-UP key to finally kick in the reset to default cycle. I got the phone working again and have restored my last backup So, I havent lost anything.
The only problem now i am noticing is the light on the keyboard never goes off. Even when I power the phone down, "the keyboard stays lit".. I am having to remove the battery just to keep it from draining when the phone is not in use.hmmm. is there a regEdit key I can modify that may turn off the keys? id rather have no light at all over no battery juice. If i can edit the key to turn off the backlight on the keyboard permanantly , this will be a temp fix for me until i get a new phone.
as anyone ever experienced this?
Click to expand...
Click to collapse
_______________________________________________________
Well, today 1/18/2011: the above issue seem to have vanished altogether. Very good. I did nothing but what i was resolved to do until I buy a new phone (take the battery out so to completely power down the phone and lights).
Today, my ole third hand decided to work like normal! Yay!. All of a sudden it rebooted, and now the keyboard backlight turns off when the keypad is closed and you can see it light up when extended. and most importantly: the back lighty for the keypad goes "off" when the phone is powerd down. go figure this one.
I am glad its working like normal now, but i know its time to get a new phone. These are just symptoms of the "big-crash" soon to come. I am backing up every day.
For now, very very glad my phone is back to "normal"

[Q] Stock HOX - bricked by skype?

My phone is totally non-responsive. Pressing the power button is non-responsive, plugging it in to charge does not seem to work; no red charging LED. Won't boot while plugged in.
Here's what happened:
I set two alarms for this morning. One to wake up for a skype call I was supposed to make, and a second to actually get up. I hit snooze when the first alarm went off. I had about 50% battery according to the battery icon in the top right. I decided to make the call anyway and launched skype and started a video call. During the call the alarm went off again and I dismissed it. The video was frozen on the frame when the alarm went off. I backed out of the video on the skype app, and went back to it. The video was now black, and the phone warned me the camera was off. The camera icon in skype showed it was on, but i pressed it anyway, at which point the icon changed to the no-video icon. I selected front camera, the icon remained showing a camera with a red line through it. I still did not have video, my calling partner could not see me anymore either. We finished the call with audio only, about 15 minute total phone time. I pressed the top hardware button to shut off the screen and I went back to sleep waiting for the next alarm. That never came. I woke up and tried to turn on the screen with the hardware button and nothing happened. I believe I saw it flash a green LED notification as I was doing this too, but it never flashed again. I thought maybe I left skype open and the battery died, so I plugged it in. The phone won't start charging, or at least the LED wont show. I tried booting it after it was plugged in five minutes (still no LED) and nothing happens.
I unplugged it and tried holding power and down volume for 30 seconds, then I tried power and up volume, then I tried power and both down and up volume all for more than 30 seconds. No response. (what is the proper hard reset for this phone anyway?) I have since left in unplugged hoping that the battery will completely drain and then I can start using it.
Any ideas in the meantime? this phone will last a week with 50% without using the screen or the processor.
-Pete
Does your hardware capacitive buttons flash when you press the power button for 10 secs?
Sent from my HTC One X using xda app-developers app
XxVcVxX said:
Does your hardware capacitive buttons flash when you press the power button for 10 secs?
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
No, nothing. I have a fully appreciation for the term "bricked" right now.
I think going back to the store is your best option in this case .... Unfortunately
yea, I think so too. I already emailed customer support.
If you plug the phone into a computer, go to device manager. Does it say QHSUSB_DLOAD anywhere?
Sent from my HTC One S using Tapatalk 2
So I went out all day and left my phone at home (the shop i bought the phone is on the ground floor of my office building an hour away, I was going to wait till monday to have it looked at there). Got back and plugged it in, was about to try usaff22's suggestion, but the LED started flashing red. after a bit it went solid and the phone turned right on. still no word from HTC, but it is the weekend and all. Maybe Jellybean will fix the root of the problem. Anyway, thanks for the suggestions everyone!

[Q] black screen / Screen unresponsive - Sumsung Galaxy Tab S 10.5 (SM-T805)

My tablet Galaxy Tab S 10.5 (SM-T805) screen went black. I can’t see the screen.
Touch also does not seem to work. However it’s on. it is receiving calls and other messages. It is connected to WiFi.
Power button, volume button are working but I can’t power off the device cause I can’t see the screen options.
When I plug in to the charging cable it vibrates but does not show anything on screen.
It didn't drop or hit by anything. i have been using it for 3 months now. it just happened by itself or may be by some update that I don’t know.
Please help how to bring it back to life
GUI crashed. Press Power+Vol up+Home (for approx 20 sec).
pibach said:
GUI crashed. Press Power+Vol up+Home (for approx 20 sec).
Click to expand...
Click to collapse
I tried several times.. nothing happens... any other suggestion please
Power+voldown+home.
If this does not boot, you could try with usb dongle.
Or full run down to empty battery.
Next chance would require to open it.
sarhn007 said:
My tablet Galaxy Tab S 10.5 (SM-T805) screen went black. I can’t see the screen.
Touch also does not seem to work. However it’s on. it is receiving calls and other messages. It is connected to WiFi.
Power button, volume button are working but I can’t power off the device cause I can’t see the screen options.
When I plug in to the charging cable it vibrates but does not show anything on screen.
It didn't drop or hit by anything. i have been using it for 3 months now. it just happened by itself or may be by some update that I don’t know.
Please help how to bring it back to life
Click to expand...
Click to collapse
It's not bricked so calm down. It just had a cyber stroke. It will be fine just let the power run out and recharge the battery so u can turn it on again. Same thing happened within days for getting mine.
yes... I am waiting for the battery to be completely dead. so far its on...taking calls and sms..I don't howmuch % of batter is left cause I can't see it.
I had the exact same problem once....and i had a hunch that the screen was fine, it turned out it was thankfully....but....im aware that on 100 percent battery in standby it can last a good week or so....i was too impatient...so i ran my fingers around the edge of the backing and slowly was able to pull out the back of tge case and unclip the battery...worked straight away when turned on.
But also what i discovered does reset the tablet forcefully is holding power, vol down and the center button at the same time....try it a few times for a minute each time...if successful you might get a message about being in download mode but then just do the same thing again but imidiatly release your fingers once you see the screen go off from download mode or it will just go bavk into it...good luck m8
Have you tried holding down the power button for awhile, like 30 seconds? This should shut your device off....Then take it from there.
Itchiee said:
Have you tried holding down the power button for awhile, like 30 seconds? This should shut your device off....Then take it from there.
Click to expand...
Click to collapse
Doesnt work on t805...dunno why.
pdolton2000 said:
Doesnt work on t805...dunno why.
Click to expand...
Click to collapse
Correct .. i tired many times... it does not work... may be the device is on...
How to run down the battery its still on .. its third day today...
sarhn007 said:
Correct .. i tired many times... it does not work... may be the device is on...
How to run down the battery its still on .. its third day today...
Click to expand...
Click to collapse
Seriously on my tab right now i just held vol down, power and center button whilst on and after 25 seconds screen went black then gave the "are you sure you want to enter download mode." Then i tapped vol up......t805 as well.
Battery completely empty.. tab S turned off, i plugged in the charging cable (1 ) battery meter does not appear (2) Power+vol does not work for me.. if it does.. i can't see because of the dead screen...
i have 2 options now..
(1) send it back in warranty.. this will take a lot of time and they will only fix not replace.. i guess
(2) open it and fix the display.
Thinking,,,,,,,,
sarhn007 said:
Battery completely empty.. tab S turned off, i plugged in the charging cable (1 ) battery meter does not appear (2) Power+vol does not work for me.. if it does.. i can't see because of the dead screen...
i have 2 options now..
(1) send it back in warranty.. this will take a lot of time and they will only fix not replace.. i guess
(2) open it and fix the display.
Thinking,,,,,,,,
Click to expand...
Click to collapse
Well 160 dollars for lcd , digitizer and frame ...
http://m.aliexpress.com/item/2016775924.html?tracelog=storedetail2mobilesitedetail
But if it turned out it was something else causing it nit to display like a board fault im not sure they will help ya only catch m8
Hello,
Did you finally got some result?
I have exactly the same problem with a Samsung Galaxy Tab S 10.5. The screen suddenly went black although the light leds (home, back) were on.
I tried different combinations of buttons, usb charging and nothing. The only difference is that now the light leds are off.
---------- Post added at 08:46 PM ---------- Previous post was at 08:32 PM ----------
I have achieved to boot up the device because I have heard the start up sound and some notifications. However, the display doesn't work at all: the screen is black and there is no response when touching it. In addition, the light leds of the buttons are off now even when I push the home button.
Volume keys are working (I hear the sound then touching them).
Hard reset is VOLUME DOWN(left side on a 10.5) + POWER. Hold until it restarts.
ashyx said:
Hard reset is VOLUME DOWN(left side on a 10.5) + POWER. Hold until it restarts.
Click to expand...
Click to collapse
That doesn't work, as sarhn007 said the problem is that screen is dead:
sarhn007 said:
Battery completely empty.. tab S turned off, i plugged in the charging cable (1 ) battery meter does not appear (2) Power+vol does not work for me.. if it does.. i can't see because of the dead screen...
i have 2 options now..
(1) send it back in warranty.. this will take a lot of time and they will only fix not replace.. i guess
(2) open it and fix the display.
Thinking,,,,,,,,
Click to expand...
Click to collapse
But I can't figure how could this happen in a new (2 month) high-end product... I think that I will have to use the product warranty with the cost in time it involves.
This has happened to me twice during the last year. The last time was just ten minutes ago. I tried everything mentioned in this thread. VolUp+Home+Pwr for a looong time. Just PWR for a long time. I saw on my Wifi Router that the tablet was connected, but no screen. What helped me was to do a combination of everything mentioned here. What eventually got the screen on was 1. I turned of my router and 2. Home+VolDOWN+PWR for (what I believe was) 10-15 seconds. Then I got the choice to do a normal restart or a device reset. If you come this far, be sure to press VOL DN when asked. Otherwise your data will be lost. Obviously, I can't say if the router pwr off was necessary or not.
What's really weird is that my LG G3 went into a boot loop at about the same time (less than five minutes apart). They are not connected other than using the same router. I've had my LG G3 for exactly one year without ever experiencing a boot loop. The LG G3 is rooted, but my SM-T805 is not.
zeknun said:
That doesn't work, as sarhn007 said the problem is that screen is dead:
But I can't figure how could this happen in a new (2 month) high-end product... I think that I will have to use the product warranty with the cost in time it involves.
Click to expand...
Click to collapse
It's easy fix, most of the time due to loose LCD cable. If you can hear anything on the background but blank screen, 99% is loose cable.
Remove the back cover, disconnect and reconnect LCD cable, make sure it's fully inserted, then secure the connector with tapes. Test by plugin to charger, press the HOME button.
If you do correctly, the battery icon should show up on the screen. Then put back the cover, you're done.
pdolton2000 said:
I had the exact same problem once....and i had a hunch that the screen was fine, it turned out it was thankfully....but....im aware that on 100 percent battery in standby it can last a good week or so....i was too impatient...so i ran my fingers around the edge of the backing and slowly was able to pull out the back of tge case and unclip the battery...worked straight away when turned on.
But also what i discovered does reset the tablet forcefully is holding power, vol down and the center button at the same time....try it a few times for a minute each time...if successful you might get a message about being in download mode but then just do the same thing again but imidiatly release your fingers once you see the screen go off from download mode or it will just go bavk into it...good luck m8
Click to expand...
Click to collapse
really thanks dude...nice work..
my phone samsung on nxt today stopped working in same manner...your idea worked...really thanx..i tried all...as i am also a tech guy.....but nothing worked..ur idea worked for me...thankx a lot...

Categories

Resources