Develop Bugs

Is My Tilt 2 Dead?

I checked email then I sent a text. A few minutes later, I got a response. I hit REPLY and the screen went white. I don't know why. It's never been dropped or put in water, etc. The phone had been in my pocket all day and was close to a full charge. I couldn't power down so I removed the battery and turned it back on. The phone vibrated as it does when it boots up but the screen remained black. I flipped out the keyboard and it was backlit as usual.
I tried a few times and never got anything going. The screen remained black but the phone got hot. Just now, I noticed the amber light blinking but it went solid when I plugged in the charger. I attempted to power it up once more and called from my landline- goes straight to voicemail, no rings. Hmm. Is my Tilt 2 Dead?
Any advice on how to resurrect my phone? AT&T gave me this refurbished model about 4 months ago (60 day warranty?) to replace the Fuze that died at 13 months (12 month warranty). I just want a phone that can last as long as my contract.

try to put it in bootloader mode.
do this by holding the volume down button and powering on the device (if its already on then volume down button and press the soft reset button on the side of ur device with the stylus). Keep holding the volume down button until the 3 colored screen comes on with text in red.
if you can get it in bootloader than you can save the device
Sometimes mine hangs on startup several times in a row, to fix it, i take out the battery, put it back in, hold down the power button and volume down button till its in bootloader then soft reset with the button on the side of the device and it boots up
if that doesn't work then you may need to hard-reset/flash a new rom (all your data will be erased). If nothing comes on the screen then your screen could be dead.

I charged it all night. When plugged in, the amber light is solid. When unplugged, the light turned off. The phone doesn't power up.
It did not respond to a soft-reset (holding the volume down button and powering on the device) nor a hard-reset (press and hold both the send and end hardkeys).

AT&T is telling me it's dead. Um, I've got a different ROM loaded on this. Can I return it in this state? If they cant resurrect it, it doesn't matter?
Do I need to restore factory settings and, if so, how?
And, Warranty Dept. wants me to buy another one. They gave me this refurbished one four months ago with 90 day warranty. What are my chances here?

cam123 said:
I charged it all night. When plugged in, the amber light is solid. When unplugged, the light turned off. The phone doesn't power up.
It did not respond to a soft-reset (holding the volume down button and powering on the device) nor a hard-reset (press and hold both the send and end hardkeys).
Click to expand...
Click to collapse
If the indicator light never went green, the battery may be at fault. Just a thought.

I have heard of the black screen that comes up and ppl have to soft reset to get anything to work. Never had this problem till lately. My fone was on and plugged in all nite. Never had a prob with the battery, only had this fone 3 months and now all nite and day the screen has been goin black then not waking up at all. I did install Cookies Home Tab and the CTHE Editor last nite along with the newest SRS WOW HD sound.... anyway, put my fone on charge, left it on as I always do, woke up today and had no way up waking it up, and the charge light was still orange. I took off the back and used the reset button on the right to restart it. Unplugged it, then plugged it back in. The light immediately turned green yet when the device powered on and the screen went to black, it would NOT come off the black screen. I checked the settings for the lock screen, nothings on... I am using Energy ROM 6.5 OS 5.2.23569 build 23563.5.5.0 ... awesome ROM and yet Ive never had this prob. Had this ROM for the past 2 weeks without a hitch, installed Cookies Home Tab and the Editor progs and now this. ... any help?
EDIT: Also in the time the screen was blacked I never got a single text, MMS, fone call or email...

panthersdzynes said:
I have heard of the black screen that comes up and ppl have to soft reset to get anything to work. Never had this problem till lately. My fone was on and plugged in all nite. Never had a prob with the battery, only had this fone 3 months and now all nite and day the screen has been goin black then not waking up at all. I did install Cookies Home Tab and the CTHE Editor last nite along with the newest SRS WOW HD sound.... anyway, put my fone on charge, left it on as I always do, woke up today and had no way up waking it up, and the charge light was still orange. I took off the back and used the reset button on the right to restart it. Unplugged it, then plugged it back in. The light immediately turned green yet when the device powered on and the screen went to black, it would NOT come off the black screen. I checked the settings for the lock screen, nothings on... I am using Energy ROM 6.5 OS 5.2.23569 build 23563.5.5.0 ... awesome ROM and yet Ive never had this prob. Had this ROM for the past 2 weeks without a hitch, installed Cookies Home Tab and the Editor progs and now this. ... any help?
EDIT: Also in the time the screen was blacked I never got a single text, MMS, fone call or email...
Click to expand...
Click to collapse
OK, now it is clearer. It happened AFTER you installed software. You need to do a hard reset.
Power down the phone. Hold both left and right phone keys (red and green) while you hit the power button. The phone should reset itself back to factory condition. Unfortunately you will lose all data on the phone (the SD card data should be OK). This should fix your problem.

Yeah, its totally dead now except.... when plugged into the charger, I get an amber light. I will stop by a store and try a different battery.
By the way, AT&T Customer Service told me they will not replace my 4 month old phone because it is past the 3 month warranty.
stevedebi said:
If the indicator light never went green, the battery may be at fault. Just a thought.
Click to expand...
Click to collapse

stevedebi said:
OK, now it is clearer. It happened AFTER you installed software. You need to do a hard reset.
Power down the phone. Hold both left and right phone keys (red and green) while you hit the power button. The phone should reset itself back to factory condition. Unfortunately you will lose all data on the phone (the SD card data should be OK). This should fix your problem.
Click to expand...
Click to collapse
Already done that Steve with no luck. Next step?

If the Tilt 2 is dead, I have to replace it. Any suggestions? I was happy with this model. My big requirement is real keyboard.

if its dead its dead... if you need another just go get another I guess.... Sounds pretty crappy though. I got my phone in December and just got a warranty replacement today. They said my warranty was good till the 1 year point of when the phone was purchased or 90 days after I received the new phone (if it was close to the end of my original warranty) I assume you were out of your original warranty or bought a used phone or something. But yeah... try another battery before diving in to another phone for sure.

Possible fix
Ok, Ive kept lookin for this solution and so far, its worked. On the lock screen, especially with the new custom ROMs, the lockscreen has to be set to "classic". Something about the new Slide to unlock feature is killin the screen to black, and that makes the fone unusable... meaning when the fone goes to black, it will ONLY charge. No fone calls, no texts recieved, no emails, no nothin... calls go straight to voicemail when ppl try to call u. (when u restart the fone u may get ur emails and any MMS messages, but not texts or missed calls) If u have the Cookies Home Tab, like me, it would be labeled "Windows" lock screen that u will need. (From Home screen, click "MENU", then "Cookies Home Tab Editor", then "locksreen Settings", then under Unlock Style, click "Windows". then click "menu" at the bottom of the same screen, then click "apply settings". When u exit, Sense will refresh and ur good to go ... Ill repost in a few days to see if thats it or not.
Also I heard less talk, but some about it being an issue with the SD card. That one said to remove ur SD card, install a new ROM and reformat ur card before installing it back into the device... *(Be sure to transfer all info on card to PC before u format, formatting will erase everything from the SD card)*

[Q] Need Help in Laymen's Terms...Tilt 2 Stuck on Red, Green, Blue, and White Screen.

I have a HTC Tilt 2... I have been having a ton of problems with this phone but when it really freaks out, I usually take the battery out, let it sit a few days and then it starts working again. My phone started doing some funny things today so I restarted it as usual, it freezes and I remove the battery. When I turned it back on I got a red, green, blue and white screen with text:
RHOD300 32M MI-BC
SPL-0.87.0000
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
498, 526 792,855
795,211 214,211
223,845 Calibrated
This has never happened before.
This RGB&W screen used to say serial when it first happend a few hours ago but then I installed ActiveSync and plugged it into PC, now says USB.
ActiveSync won't recognize my device, it does appear in My Computer.
I tried following directions in another forum to turn the device off then hold the pickup/hangup/power button at the same time...a different screen appeared than the forum directed, a gray screen with "Trigger Ramdump Mode"...then I couldn't do anything.
I can restart it back into the tri-color screen...
I need help in laymen's terms. I've never tried to change anything about the phone's operating system, I've never done an update or anything, I do not have the Tilt2 CD.
Right now I have my SIM card and my SanDisk card removed, I was afraid it could get erased when I tried the pickup/hangup/power button trick.
PLEASE SOMEONE HELP!!!!!!!!!

This screen is called the bootloader. Its used by technicians (or more advanced users) to load the OS or "ROM" onto the phone. It may be stuck in bootloader because some of the OS files are damaged or missing, and the OS is not booting up. Or possibly even a hardware failure.
Pulling the battery may/may not be the culprit. I've read someone on here mention that pulling the battery can corrupt files on the phone. If the phone is lagging, frozen, then pulling the battery is not the correct way to restart the phone. The correct method of restarting the phone by soft reset is done by sticking the stylus into the small red hole/button on the side of the phone, while the batter cover is off:
http://www.hardreset.eu/htc_touch_pro_2_rhodium_hard_reset_soft_reset_en.html
Pulling the battery is only a method of last resort, as the soft reset button will work in almost all cases.
Hard reset by holding TALK, END and POWER is probably not going to work. It requires the OS to be working, and you are not even getting to the point that the OS is booting.
Its supposed to say "USB" when the phone is connected to your PC via the USB cable. If I remember properly, it will say "Serial" in bootloader for a second when you plug the phone to USB, and switch to saying "USB" after that. USB is a form of serial connection, after all (USB = Universal Serial Bus). As long as it says "USB", you are in somewhat good shape, since it SHOULD allow you to try the following.
Try downloading the latest ROM from HTC. This is actually a newer version than the ROM that was originally on your phone, but still "official" ATT software. And by most accounts, better than the old ROM. Since its official software, installing this will not endanger any warranty you may still have on the phone.
Its the first file on the following page ("ROM Update"):
http://www.htc.com/us/support/tilt-2-att/downloads/
With your phone connected to your PC by USB, run the .exe ROM update file and follow the instructions that come up on your PC screen. It should work. Try it and let us know.
Bear in mind, you will lose any personal data you have on the phone (contacts, texts, emails, etc). But you've probably already lost those.
Its possible there is some other way out of it, I certainly don't know all the tricks. But in searching around this site, being stuck in bootloader seems to require flashing a new ROM to get out of it. And it seems that you are prepared to lose your personal data, based on the fact that you were already trying to hard reset (the TALK, END, and POWER button process) which also dumps all your data. And flashing the official ROM is really pretty easy to accomplish. Just a pain that you have to re-setup the phone again, since it will basically be returned to factory condition (but in this case, a slightly newer version of the OS).

The SAME thing happened to My HTC Tilt 2 an Hour ago (1/13/2010 4:46pm)
The same exact thing occurred to my HTC Tilt 2 today. It is stuck on the red green, blue and white screen with the same yellow 'config' type message . The white bottom strip has the black letters "serial" typed in.
My problem also, is that the phone stays "on" until i pull the battery out. The moment i place the battery back in the phone, the keys stay lit up instantly and the screen is black. When pressing the power button, then i get the same red, green, blue and white screen.
Ive tried holding the talk/end/power buttons all at the same time, it doesnt make a difference. So i cant get to the step where you press the "volume up" key so to initiate the master reset.
Ihad no idea the HTC Tilt2 would just fry like this. I had no additional apps that were unusual to the norm, i even had more free space than used on the set. its not like the phone was over loaded.
Hmmmmm.... help!!!

Re-read above about "soft-reset" and you might want to try reflash your phone.
Sent from my MSM using Tapatalk

RicoATT said:
The same exact thing occurred to my HTC Tilt 2 today. It is stuck on the red green, blue and white screen with the same yellow 'config' type message . The white bottom strip has the black letters "serial" typed in.
My problem also, is that the phone stays "on" until i pull the battery out. The moment i place the battery back in the phone, the keys stay lit up instantly and the screen is black. When pressing the power button, then i get the same red, green, blue and white screen.
Ive tried holding the talk/end/power buttons all at the same time, it doesnt make a difference. So i cant get to the step where you press the "volume up" key so to initiate the master reset.
Ihad no idea the HTC Tilt2 would just fry like this. I had no additional apps that were unusual to the norm, i even had more free space than used on the set. its not like the phone was over loaded.
Hmmmmm.... help!!!
Click to expand...
Click to collapse
Read my post above. Your OS is missing or damaged, and you need to reflash (re-install) it.
Master reset re-loads the OS from the ROM area of your memory. The ROM is damaged, so their is nothing to reload. That's why its stuck in bootloader (tri-color screen).

redpoint73 said:
Read my post above. Your OS is missing or damaged, and you need to reflash (re-install) it.
Master reset re-loads the OS from the ROM area of your memory. The ROM is damaged, so their is nothing to reload. That's why its stuck in bootloader (tri-color screen).
Click to expand...
Click to collapse
_______________________________________________________
Today, i stuck the battery in the phone (Tilt2) pressed the hard reset keys. THIS time it allowed the volume-UP key to finally kick in the reset to default cycle. I got the phone working again and have restored my last backup So, I havent lost anything.
The only problem now i am noticing is the light on the keyboard never goes off. Even when I power the phone down, "the keyboard stays lit".. I am having to remove the battery just to keep it from draining when the phone is not in use.hmmm. is there a regEdit key I can modify that may turn off the keys? id rather have no light at all over no battery juice. If i can edit the key to turn off the backlight on the keyboard permanantly , this will be a temp fix for me until i get a new phone.
as anyone ever experienced this?

RicoATT said:
_______________________________________________________
Today, i stuck the battery in the phone (Tilt2) pressed the hard reset keys. THIS time it allowed the volume-UP key to finally kick in the reset to default cycle. I got the phone working again and have restored my last backup So, I havent lost anything.
The only problem now i am noticing is the light on the keyboard never goes off. Even when I power the phone down, "the keyboard stays lit".. I am having to remove the battery just to keep it from draining when the phone is not in use.hmmm. is there a regEdit key I can modify that may turn off the keys? id rather have no light at all over no battery juice. If i can edit the key to turn off the backlight on the keyboard permanantly , this will be a temp fix for me until i get a new phone.
as anyone ever experienced this?
Click to expand...
Click to collapse
_______________________________________________________
Well, today 1/18/2011: the above issue seem to have vanished altogether. Very good. I did nothing but what i was resolved to do until I buy a new phone (take the battery out so to completely power down the phone and lights).
Today, my ole third hand decided to work like normal! Yay!. All of a sudden it rebooted, and now the keyboard backlight turns off when the keypad is closed and you can see it light up when extended. and most importantly: the back lighty for the keypad goes "off" when the phone is powerd down. go figure this one.
I am glad its working like normal now, but i know its time to get a new phone. These are just symptoms of the "big-crash" soon to come. I am backing up every day.
For now, very very glad my phone is back to "normal"

[Q] Screen not starting up for power button

Hi,
I started to get a weird problem since last week. I've had this phone for about 3 months now and never had any problem like this.
It all started one morning when I wanted to stop phone alarm. The alarm was going off but the screen was black. I pressed the power button to wake up, but it was still black. After couple of times pressing the power button the screen came up. First it was not that often but the situation started to get worse. It came to that I can sometimes cannot turn it on for a long period of time. I need to keep pressing power button, volume buttons and eventually it will come up.
This is what I've found so far:
1) When the power button is pressed, although the screen doesn't start up, I can see the three buttons at the bottom lighting up. So it is not a problem of the power button.
2) When the power button is pressed, although the screen doesn't power up, the screen seems responsive. I can feel the vibrations when I tap (I have a startup password)
3) When the phone is connected to a power supply, screen always starts up without a problem.
4) Screen will start up more frequently when the batter power is high.
It seems as though there is a connection between batters power and the screen not starting up. But then again, once the screen comes up (after not starting up), then it works fine, until I turn the screen off.
Has anybody experienced anything like this before?
I did a factory reset thinking it might be some application I installed but it didnt help.
I had to send this phone once to repair the speaker and cost more than $80 just for courier. I don't want to spend another to get this fixed.
Thanks.

I have this problem or a problem very close to this. I have a HTC One X (international version). I'm running the latest version and updates and the problem has existed for at least the last two updates.
Android Version 4.1.1
HTC Sense version 4+
Software number 3.18.401.1
I have the screen lock pattern turned on.
Sometimes when I hit the power button, the phone does not turn on and so I press it again and only after a third press does the phone turn on. I then unlock the phone and use as normal. So, several times per day I have to press the power button three times before the phone turns on. But other times I press the power button once and it turns on straight away. I've just turned the pattern unlock off to see if this makes any difference. I'll start to record the exact details of when I experience this and see if we can work out a common cause.
Hopefully if enough people report this problem then they can send out an update to fix this problem.

exazonk said:
I have this problem or a problem very close to this. I have a HTC One X (international version). I'm running the latest version and updates and the problem has existed for at least the last two updates.
Android Version 4.1.1
HTC Sense version 4+
Software number 3.18.401.1
I have the screen lock pattern turned on.
Sometimes when I hit the power button, the phone does not turn on and so I press it again and only after a third press does the phone turn on. I then unlock the phone and use as normal. So, several times per day I have to press the power button three times before the phone turns on. But other times I press the power button once and it turns on straight away. I've just turned the pattern unlock off to see if this makes any difference. I'll start to record the exact details of when I experience this and see if we can work out a common cause.
Hopefully if enough people report this problem then they can send out an update to fix this problem.
Click to expand...
Click to collapse
I'm pretty sure this is a hardware issue. I bought mine from Expansys and sent it back to them for repair. It's been more than a month and they say they're still reparing it.
In my case it was impossible for me to start the screen up with power button no matter how much I pressed it. The only thing that worked for me was to press the back of the phone just below the camera. So it seems like a hardware issue. But on the other hand, at times when I can't get the screen turned on no matter what I do, I'd turn the phone off and start again and the thing would start up like nothing happened. So while I'm pretty sure it is a HW issue, I'm not sure how a power restart makes it work.

For me I don't think that this is a hardware problem as it only started happening once I did the big upgrade from 4.0 to 4.1 and then it follows a specific pattern. That is three power button presses will always turn it on. Less frequently I also get a problem where the power button turns on the three lights on the soft buttons but the screen remains black. I then hit the power button to turn it off, and again to turn it on and the phone is back to normal again.
Is yours an international version? I bought mine an international version and had it shipped to Australia.

solved?
Hi - did anyone ever solve this? This is happening to me with my HTC desire X after having had the screen repaired, so I think it is hardware related, but the shop doesn't know how to fix it! My screen also does not turn back on when I want to end a phone call and pull the phone away from my face anymore. These problems seem related as they started at the same time. I would be grateful for help!

Broken Display?

ok so here is the rundown
Device: HTC one on vzw
Rom: Slimbean 2.x
Gapps: Slim AIO gapps
had a weird problem with the display today if anyone has had this or know someone who has i would greatly appreciate the help. I just flashed Slimbean 2.x last night and all was good. no problems what so ever, got everything setup and was working fine. this morning around 10am i opened snapchat to view a video. i clicked on the video and as soon as it started the screen went blank and would not turn on. i tried holding the power button down for at least a minute and nothing. also tried power and volume down, power and both volume buttons, power and volume up and still nothing seems to work. when i plug it into the wall charger the red LED light does not turn on and screen does not wake. when i plug it into the computer the computer does not ever read the device and noting pops up letting me browse the files on the phone. i have no clue why this happened it has been working fine for the 3 months that i've had it. took it to verizon about an hour ago and they didn't know either but they are sending me a replacement htc one. all i really want now are my photos that i have on the phone.
does anyone have any ideas about what i could do?
thanks

I had something similar and think it was conflict related. After installing the "advanced power menu" with xposed, I had an issue when trying to use it to boot into recovery. Basically it had timed out and then went away without rebooting. The next time I tried it locked up and my screen went black. My keys would light up if I clicked on the power button (it was dark in the room so the sensor was still working), but nothing else. Nothing I did would make the screen turn on at all and holding down the power key to reboot did not work. I just planned on letting the battery die out. After about 45 minutes, the phone just rebooted and everything was back to normal. I really think it locked up due to a conflict similar to what a PC might do.

[Q] Please help! Random power off won't boot!

Okay I will try to sum this up. My S3 was working fine and everything randomly I noticed issues with battery calibration It would be 100% then I would calibrate it and then unplug and then I'd instantly drop to 85%. Thought It was a battery issue and made a point to get a new one later. Then it kept working for another month or so then It started really screwing up the shutdown menu would randomly pop up and I'd back out of it.
Then randomly 3 seconds later the phone reboots. And it would keep doing that randomly I thought it might be a power button issue. Then as time goes on it got really bad to where it would simply reboot and not make it past the bootloader, It would not "reboot" more like a complete shutdown then I'd have to power it again and have it do the same thing. Seeing how I could not even make it past the bootloader I got a new battery, waited a week for it and then I put it in and the same issue happened. It would not get past the bootloader.
So I kept trying and trying and trying and it finally booted past that. And it stayed on for a whole night. I did everything on it I normally would and it was working great. Then the battery was getting low so I plug it in and was going to calibrate it after it was charged, I go back to it and it's dead again won't get past the bootloader once again. I'm completely out of ideas on how to fix this I pop'd off the button and blew in there and the button seems fine and everything still no change. I also can not get into recovery. It trys and loads but then shuts off. Anyway if anyone has any ideas on what this is or how to fix please help! I need my phone back! Thank you.
I'm running MOAR Lite version.
UPDATE: Took the phone apart and took a close look at the button it looks 100% fine...I saw a video on youtube that requires you to complete tear the button off and it works. But I don't know if the button is my main cause of this issue or if it will actually work. Some says it works, some says it does nothing...Please let me know thanks...
UPDATE 2: It will show that battery with spinning circle in it for like 1 second then turn off again. (When it is plugged in)

That's odd. But when it comes to the power button, dismantling and what not 90% of the time will show 0 issues. It will look perfectly fine when it's not. You playing with the power button I assume were pressing hard and normally to try testing it. It's a common issues on this version of the S3 to have faulty power button and you would need to get it repaired. Odly even slightly atmospheric changes can cause it to act different at different points. Some days it works fine, other days a very slight brushing over can cause it to screw up and trigger a manual shut down (holding for like 10 or 15 seconds).
Assuming that it is the power button, or to try, just do a variation of things to the power button itself. Use your finger nail to jiggle it around with different pressures. During boot if it shuts off, it could be the power button internally stuck, just jiggle it around.
This is all I can think of unless you bring it in to get repaired.

I was encountering the exact same problem. I would try to get into download mode and it would sit at the "Downloading" screen for about 5-7 seconds then the display would go blank. It won't make it into recovery either. Based on the above recommendation I took the whole phone apart and sprayed a lot of compressed air directly on the power button mechanism and the plastic case pressing the button in. I didn't see anything broken with the button when I did that.
It seems to be working now, I can boot into my Rom. Don't know how long this fix will last.