I can't access my orbit's bootloader - P3300, MDA Compact III ROM Development

I've try all the way to get my ppc in the bootloader mode but it seems doesn't work(Record+SR,....)
any body can tell me why it is?
thks

does hard-reset menu work?
if so, try to hold both Rec + Power at once and softreset, don't release the keys until you see the tricolor screen

Related

Bootloader

I have an ZDAII and have been given an XDAIIs, the only problem is I can not get it out of the boot loader screen, you know the grey dos like screen with serial V2.06.
I've tryed to reboot it, power + camara + reset button, but with no joy
Does anyone have any other ideas how I can bring it to life/
Flash it with a rom.

how enter flash rom mode on hw6515 (aka Beetles)

Hello
My hw6515 lost power during flash upgrade. Now not booting (I see white screen with HP logo and ver....).
I try enter Flash mode, but don't know how. Found post w/ instructions
http://davesipaq.com/forum/showthread.php?t=7567
but seems there is no iTask button on hw6515.
Does anybody know way to go Flash mode and recover my iPAQ
thanx
janv said:
Hello
My hw6515 lost power during flash upgrade. Now not booting (I see white screen with HP logo and ver....).
I try enter Flash mode, but don't know how. Found post w/ instructions
http://davesipaq.com/forum/showthread.php?t=7567
but seems there is no iTask button on hw6515.
Does anybody know way to go Flash mode and recover my iPAQ
thanx
Click to expand...
Click to collapse
"iTask button" usually relates to the 3rd or the 4th hardware button...
To Enter Flash Mode on the HW6515
Press and hold Power & Joystick (Press it in), Then use the Stylus to reset the unit, release all three it will drop into flash mode (May take a couple of attempts to get it right)
Hope that helps
Richard

Bootloader Mode?

Hi, just got this O2 orbit, trying to put on touch flo.run that USPL, then it updated something. then treid to update rom but failed!. So tried to put phone in bootmode 'Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen' , but it will not go in boot mode?. The phone just starts normal. why can I not get the phone in boot mode.
thanks (new to this phone)
Bootloader is different on this devive. Hold down two Softkeys ( above Windows Button and OK button ) while pressing reset with stylus. Once text comes on screen, press green call button to HARD RESET.
Hold down the speed dial button, push and release the soft reset, keep the speed dial button held down until the bootloader screen appears.
Shand359 said:
Bootloader is different on this devive. Hold down two Softkeys ( above Windows Button and OK button ) while pressing reset with stylus. Once text comes on screen, press green call button to HARD RESET.
Click to expand...
Click to collapse
Or:
Start - Settings - System - Clear Storage
But that's a Hard Reset, it still won't go into Bootloader.
BootLoader
Press and keepholding voice record button while using stylus to soft reset. this will take you into boot loader mode.
Sorry. My mistake. What i described was a Hard Reset not entering Bootloader. Sorry again m8!!
Thanks, tried both. only had phone 1 week. Its a bit slow.

asus p535 dead dead dead

i was broken p535 with stuped manip
i was put rom in sd-car for change language to french
i made bootloader mode with power+ camera+ mic+ reset
when phone asked for galaxy file i was romouved batterie becous i can't exit from boot mode .
now phone completely dead
can't go to bootloader mode
can't be reconised by usb pc
just red led with charger or usb
please please need u help expert !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Burried IT
or send to CUZtomer servic (french ehh)
I think it can wake up.
follow this
1.You insert battery and close back cover.
2.Press and still button Rec + Camera + Power and Press and release Reset button with stylus.
3.You should be saw boot loader screen(Blue screen).
After you saw blue screen.You release button Rec + Camera + Power.
After that you can flash new rom with SD Card.
IamX said:
I think it can wake up.
follow this
1.You insert battery and close back cover.
2.Press and still button Rec + Camera + Power and Press and release Reset button with stylus.
3.You should be saw boot loader screen(Blue screen).
After you saw blue screen.You release button Rec + Camera + Power.
After that you can flash new rom with SD Card.
Click to expand...
Click to collapse
thank u very very very mutch
my mistak that i press all key same time
Press and still button Rec + Camera + Power and Press and release Reset button with stylus.
hi bro
i have same prob
phone dead after failed upgrade prosses
now fone can't power on can't detected by pc
not red led
can't enter bootloader mode too
any solution for this phone?

Please please help me!!

so, i don't know where i went wrong with trying to get wm6.5 on my diam500, but now all it will do is turn on, go to the screen that says touch diamond then it turns off.
or if i hold down the volume down+the power button it goes to the .. boot loader?(i believe thats what its called)
can someone please help me. or tell me what to do from this point to fix it so i can at least use my phone again.
Did you Hard Spl before flashing the cooked ROM?
Press and hold Volume Down + "OK" (the round botton) and meanwhile press and hold the soft reset bottom to enter the Hard Rest menu then press Vol up to Hard reset the mobile.
well, the latest hapdSPL's werent workingon my phone, so i had to use tha HardSPL 1.24.
the bootloader screen shows:
security unlocked
diam500
spl-0.57.CMONEX
MicroP-Diam (led) vB
PSOC-DIAM STAGE_EVT V20
and it will only go to that when i press the voldown + power key, otherwise it just continuously turns on then off.
i really hope its not fried
1- Try the original ROM: Go to bootloader, connect phone to pc by USB and install Original ROM
2- Try MTTY (described in this forum)

Categories

Resources